纳米羟基磷灰石/胶原复合材料制备方法比较研究

低温下,通过将水热合成的纳米羟基磷灰石浆料与中性胶原溶胶共混和在中性胶原中原位形成羟基磷灰石两种方法制备羟基磷灰石／胶原复合材料,采用XRD、FTIR、扫描电镜、透射电镜和力学性能测试等方法对两种复合材料的特性进行了表征。通过对两种方法制备的复合材料的特性进行比较,发现两种方法均制备得到了纳米羟基磷灰石／胶原复合材料,复合材料在晶相组成、化学组成、纳米羟基磷灰石晶体尺寸、胶原纤维的结构等方面都与天然骨相似。但原位合成纳米羟基磷灰石晶体的结晶度比水热合成的纳米羟基磷灰石更接近于自然骨,原位合成的羟基磷灰石／胶原复合材料的均匀性、界面结合紧密度、力学性能等方面均优于共混法。原位合成法是改善纳米羟基磷灰石／胶原复合材料均匀性和力学性能的有效方法。     

Fiber‐reinforced composite hydrogels for bioadhesive and sealant applications

The use of bioadhesives and sealants for wound closure and healing applications is becoming more and more popular, particularly when other techniques, such as stapling or suturing, are impractical or inefficient. Loading adhesives with fibers has tremendous potential for improving their mechanical properties. The concept of fiber‐reinforced bioadhesives and sealants is novel and has not been investigated to date. In the present study, natural cellulose fibers were selected for enhancement of bioadhesive properties. A bioadhesive formulation based on a combination of gelatin and alginate crosslinked with water‐soluble carbodiimide was used as a generic formulation for this study, on the basis of our previous studies. The polymeric matrix and the cellulose fibers showed high affinity, which resulted in a dramatic increase in the viscosity and in the burst strength. They moderately affected the curing time, swelling, and weight loss. A mixed response was found in the compression modulus and the bonding strength in lap shear. We demonstrated that fiber‐reinforced bioadhesives have a great potential for surgical sealant applications because of improvement in the cohesive strength of the composite hydrogel. This study presents proof of the concept of using fibers for the enhancement of bioadhesive properties as a result of fiber‐reinforcement and may comprise the basis for future studies in this field. Copyright © 2017 John Wiley & Sons, Ltd.     

羟基磷灰石/聚乙烯醇/壳聚糖水凝胶在模拟体液中的力学性能

从仿生学角度出发,将自制的人工角膜支架材料羟基磷灰石/聚乙烯醇/壳聚糖(n-HA/PVA/CS)浸泡在模拟体液中,对材料的含水率及力学性能进行了测试,并利用扫描电镜、X射线衍射仪、电感耦合等离子体原子发射光谱仪及热重分析仪研究了材料在模拟体液中的形貌、晶体结构、元素组成及热稳定性.结果表明,在模拟体液中,n-HA/PVA/CS复合水凝胶的含水率为80%~86%,具有较高的拉伸强度,能承受正常眼压,且热稳定性较好.在浸泡后期,n-HA/CS/PVA复合材料对Ca2+的吸附和释放达到动态平衡;而其表面含有微量的纳米羟基磷灰石沉积,有利于纤维细胞的长入.     

明胶/羟基磷灰石复合物微球中明胶对无机相影响的研究

在油包水的乳液体系中,通过原位合成的方法使羟基磷灰石(HAP)在明胶链上化学沉积,改变明胶溶液的浓度,制得了一系列的明胶/HAP复合物微球.采用X射线衍射仪(XRD)、傅里叶变换红外光谱仪(FTIR)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和热失重分析仪(TGA)等对产物的组成、形貌以及热失重情况进行了表征.结果表明,明胶用量对复合物微球中HAP的形成具有重要影响.在明胶溶液浓度为0.025 g/mL时,明胶分子链提供的结合位点恰好与溶液中游离的Ca²⁺、PO₄^3-等离子达到平衡状态,复合物微球中无机相含量达40%,这是明胶与HAP以化学键合的形式结合所能得到的最大值.     

A collagen(Col)/nano-hydroxyapatite (nHA) biological composite bone scaffold with double multi-level interface reinforcement

IntroductionBone scaffold is expected to possess excellent mechanical and biological properties similar to natural bone tissues. In this study, we aimed to prepare a biomineralized Col and hydroxyapatite composite scaffold consisting of biomimetic bone components and multi-level bionic bone structure to strengthen its mechanical properties.MethodsWe prepared a Col/nano-hydroxyapatite biological composite scaffold with multi-level structure (from nanofibers to micron bionic bone motif to bionc bone scaffold) of biomimetic bone tissue, and biomineralized the scaffold in simulated body fluid (SBF) preheated to 37 °C. X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy and Scanning electron microscope, were used to characterize the biomineralized products.ResultsMorphological study confirmed in situ deposition of nHA in the multi-scale hierarchical structure of the biomineralized scaffold. We explored the biomineralization nucleation mechanism of the scaffolds at the atomic level based on the first principles and the mechanisms for growth of mineralized nHA crystal array in its multi-scale structure, and how the double multiscales structure strengthened the mechanical properties of the material.ConclusionsThis synthetic bone scaffold, with bionic bone composition and double multi-level interface reinforcement, provides a new strategy for synthesizing bioactive bone scaffolds with enhanced biomechanical properties.     

去卵巢大鼠骨基质明胶修复骨缺损骨痂的矿物质元素分析

应用等离子体发射光谱仪测定了去卵巢水平下骨基质明胶修复大鼠颅骨骨缺损新生骨痂的矿物质元素含量。将28只雌性SD大鼠随机分为2组。去卵巢组切除双侧卵巢，伪手术对照组保留卵巢。术后4周在颅骨上制备骨缺损并同期植入骨基质明胶。8周后，测定新生骨痂的矿物质元素含量。结果显示，去卵巢大鼠新生骨痂的S、Ca、P、Zn、Fe和Cu含量较伪手术组显著降低。实验表明雌激素水平影响骨基质明胶修复骨缺损骨痂的矿物质元素含量。     

Influence of transition metal ions on the textural properties of alumina and aluminasilicates

Accelerated phase transformations and chemical reactions of metastable aluminas and kaolinite, doped with Cu^{2 +}, Mn^{3 +}/Mn^{2 +} and Fe^{3 +}/Fe^{2 +} ions, are accompanied with accelerated decrease of surface area and pore volume values. The phenomena in metal ion doped samples are explained by a catalytic mechanism, in terms of the Jahn-Teller effect. This revised version was published online in June 2006 with corrections to the Cover Date.     

Recent progress in conductive polymeric materials for biomedical applications

Advanced polymeric materials undoubtedly constitute one of the most promising classes of new materials due to their intriguing electronic, optical, and redox properties. The incredible progress in this area has been driven by the development of novel synthetic procedures owing to the emergence of nanotechnology and by the large array of applications. In particular, hybridization of polymeric materials with nanomaterials has allowed the production of promising functional materials with tailored properties and functionalities for targeted biomedical applications. Consequently, sufficient researchers have carried out imperative studies on these advanced polymeric materials over the last decade. Beyond scientific and fundamental interest, such advanced materials are conspicuous from technological perspectives as well. In this review, we accentuate the proliferation of advanced polymeric materials in diverse biomedical applications.     

Fabrication and characterization of chitosan-gelatin/single-walled carbon nanotubes electrospun composite scaffolds for cartilage tissue engineering applications

Cartilage is a connective tissue with a slow healing rate due to lack in blood circulation and slow metabolism. Designing tissue engineering scaffolds modified based on its specific features can assist its natural regeneration process. In this study, the chitosan-gelatin/single-walled carbon nanotubes functionalized by COOH (SWNTs-COOH) nanocomposite scaffolds were fabricated through electrospinning. The effect of each component and different duration of cross-linking were assessed in terms of morphology, porosity, chemical structure, thermal behavior, mechanical properties, wettability, biodegradability, and in vitro cell culture study. Adding SWNTs-COOH decreased fiber diameter, water contact angle and degradation rate while increased tensile strength, hydrophilicity, stability and cell viability, due to their high intrinsic electrical conductivity, and mechanical properties and the presence of COOH functional groups in its structure. All the sample presented a porosity percentage of more than 80%, which is essential for tissue engineering scaffolds. The presence SWNTs-COOH did not have any adverse effect on cytocompatibility. The optimal cross-linking time increased the stability of the scaffolds in PBS. It can be concluded that the chitosan-gelatin/1wt% SWNTs-COOH scaffold can be appropriate for cartilage tissue engineering applications.     

Influence of surfactant addition on the stability of concentrated alumina dispersions in water

The goal of this study was to assess the effects of surfactant addition on the stability and viscosity of concentrated alumina dispersions. The stabilizing effects of several candidate surfactants were investigated for concentrated dispersions of two different pseudoboehmite aluminas at pH 4 and 7. The stabilities of concentrated alumina dispersions treated by pH adjustment alone and by pH adjustment combined with surfactant addition were compared to assess the degree to which the surfactant enhanced stability. The initial rate of mass removal from a sedimenting alumina dispersion was used as a measure of stability.

The anionic surfactants Surfine WNT-A and DOWFAX 3B2 were identified as effective in enhancing the stability of concentrated alumina dispersions. The optimal doses of these surfactants for stabilizing 15% by weight VERSAL™ 250 alumina dispersions at pH 4 were determined to be about 4.6 × 10⁻⁵ mol g⁻¹ for both surfactants. On the basis of the initial rate of mass removal, surfactant-stabilized 15 wt.% suspensions were found to be approximately 2.5 and 10.6 times more stable than similar dispersions stabilized electrostatically by pH adjustment alone. These more stable dispersions exhibited lower viscosities than observed for the alumina dispersions not subjected to surfactant addition. The results indicate that the stability of concentrated alumina dispersions can be enhanced by anionic surfactant addition, and that such surfactants may therefore help to control the rheology of concentrated dispersions of alumina in water.     

Preparation of carbon fibers/carbon/alumina tubular composite membranes and their applications in treating Cu-CMP wastewater by a novel electrochemical process

In this study, the alumina substrate was first prepared by the extrusion method, then followed by poly-vinylydenchloride (PVDC) film wrapping, PVDC carbonization, catalyst precursor coating, and the chemical vapor deposition (CVD) process to grow carbon fibers on the carbon interlayer. The carbon fibers/carbon/alumina tubular composite membranes (CCA-TCMs) thus obtained, with a pore size distribution ranging from 2 to 10 nm, were further characterized by scanning electron microscopy, transmission electron microscopy, and permporometry. A prepared CCA-TCM of this kind was incorporated into a novel simultaneous crossflow electrocoagulation and electrofiltration (EC/EF) treatment module to evaluate its capability in treating Cu-CMP (chemical mechanical polishing) wastewater. Crossflow EC/EF performance tests were carried out based on the 2³⁻¹ fractional factorial design using the electric field strength, crossflow velocity, and transmembrane pressure (TMP) as the experimental factors. Under the optimal operating conditions, the CCA-TCM associated EC/EF treatment module is capable of treating Cu-CMP wastewater in a proper manner. Permeate thus obtained had a turbidity of below 1 NTU and the removal efficiencies of total solids content, total organic carbon, copper, and silicon for Cu-CMP wastewater were 72%, 81%, 92%, and 87%, respectively.     

多孔纳米羟基磷灰石/聚乙烯醇复合水凝胶的表征

本文通过采用溶盐致孔法,制备了多孔纳米羟基磷灰石／聚乙烯醇复合水凝胶材料。用透射电子显微镜、红外光谱、扫描电子显微镜和图像分析对材料进行了表征。结果表明纳米羟基磷灰石与聚乙烯醇之间有一定键合,并且多孔纳米羟基磷灰石／聚乙烯醇复合水凝胶中大孔呈均匀分布且相互贯通,复合水凝胶的含水率在80％左右。该种多孔复合水凝胶是可用于人工角膜支架,是一种很有开发前景的生物医用材料。     

Comparison of Hydroxyapatite/Poly(lactide-co-glycolide) and Hydroxyapatite/Polyethyleneimine Composite Scaffolds in Bone Regeneration of Swine Mandibular Critical Size Defects: In Vivo Study

Reconstruction of jaw bone defects present a significant problem because of specific aesthetic and functional requirements. Although widely used, the transplantation of standard autograft and allograft materials is still associated with significant constraints. Composite scaffolds, combining advantages of biodegradable polymers with bioceramics, have potential to overcome limitations of standard grafts. Polyethyleneimine could be an interesting novel biocompatible polymer for scaffold construction due to its biocompatibility and chemical structure. To date, there have been no in vivo studies assessing biological properties of hydroxyapatite bioceramics scaffold modified with polyethyleneimine. The aim of this study was to evaluate in vivo effects of composite scaffolds of hydroxyapatite ceramics and poly(lactide-co-glycolide) and novel polyethyleneimine on bone repair in swine’s mandibular defects, and to compare them to conventional bone allograft (BioOss). Scaffolds were prepared using the method of polymer foam template in three steps. Pigs, 3 months old, were used and defects were made in the canine, premolar, and molar area of their mandibles. Four months following the surgical procedure, the bone was analyzed using radiological, histological, and gene expression techniques. Hydroxyapatite ceramics/polyethyleneimine composite scaffold demonstrated improved biological behavior compared to conventional allograft in treatment of swine’s mandibular defects, in terms of bone density and bone tissue histological characteristics.     

聚丙烯/尼龙6挤出原位成纤后的牵引作用

用挤出机共混挤出聚丙烯和尼龙6，加工中尼龙6作为分散相在聚丙烯中形成微纤。改变挤出物挤出模口后所受的牵引作用的速度会产生材料形态与力学性能的变化。发现随牵引速度的提高，尼龙6微纤的平均直径变小，尺寸分布更均匀，力学性能也随之提高。差热分析表明，随牵引速度的增加聚丙烯与尼龙6的相容性略有提高，X-射线衍射分析表明拉伸作用对尼龙纤维晶体中分子链的取向无影响。     

Entrapment of plant invertase within novel composite of agarose-guar gum biopolymer membrane

Invertase or β-d-Fructofuranosidase (E.C.3.2.1.26) was extracted from Cucumis melo. L. fruit (Family-Cucurbitaceae). Soluble, plant invertase enzyme was immobilized in novel composite of agarose-guar gum biopolymer matrix in the form of hydrophilic, porous membranes. The immobilized invertase was characterized for sucrose hydrolytic activity and leakage from the matrix support. The efficiency of immobilization was found to be 91% with negligible leaching. The kinetic parameters K_m and V_max for free and immobilized invertase were also determined. Immobilized invertase was optimally active in the wide pH range of 4.5-6.5. The immobilization process also enhanced the thermal stability of enzyme up to 65 °C. Immobilized invertase membranes showed excellent storage stability with shelf life of 110 days. Entrapped invertase showed better operational stability and reusability up to 12 cycles. The fluorescence spectra of the composite membranes were studied and compared with that of soluble enzyme. All these characteristics of the immobilized invertase membranes make them suitable for the fabrication of biosensors.     

Influence of Fe3(CO)12 on the interaction of Re2(CO)10 with hydroxylated alumina surface

The interaction of Re₂(CO)₁₀ and Fe₃(CO)₁₂, and that of Re₂Fe(CO)₁₄ with alumina were studied during thermal treatment by FT-IR spectroscopy. The interaction of Re₂Fe(CO)₁₄ with alumina results in the formation of Re-tricarbonyls as in the Re₂(CO)₁₀ + Fe₃(CO)₁₂/Al₂O₃ system, even at room temperature. In the view of this fact, the possibility of the action of reactive Fe-monocarbonyls [Fe(CO)₅, Fe(CO)₄] on the Re₂(CO)₁₀ with appearance of a Re₂Fe(CO)₁₄ as a transient intermediate on the support, cannot be excluded.     

Sol-gel alumina coatings on stainless steel for wear protection

The aluminium oxide films on austenitic steel are prepared from sols of re-dispersed boehmite nano powders in water. After dip-coating of the sol, a heat treatment including drying, calcination and annealing in vacuum at temperatures up to 1100°C is performed to obtain crack-free coatings of a thickness up to 6 μm. XRD measurements detect α- and γ-alumina, a TiO_x-phase at the metal/coating interface and a gradient of phase formation in the coating. The strong adhesion on the substrates is due to the layered assembly and gradient composition of the coating caused by an inter-diffusion of metal cations and oxygen in the metal/oxide interface during heat treatment. Residual stress measurements by X-rays result in compressive stresses of 2–4 GPa in the alumina coatings. The pin-on-disc test shows a remarkable improvement of wear resistance obtained by sol-gel coatings. The α-alumina content and the compressive stress of the coatings correlate with wear resistance of the coatings.     

Synthesis and evaluation of new phosphonic acid‐functionalized acrylamides with potential biomedical applications

Phosphorus‐containing acidic monomers are able to interact with the inorganic phase of mineralized tissues such as enamel, dentin, and bone. From this perspective, three phosphonic acid‐containing acrylamide monomers with different lengths of alkyl chains were synthesized to be used for both self‐etching dental adhesives and mineralized hydrogel scaffolds. Monomers were synthesized by the reaction of α‐aminophosphonates (diethyl aminomethylphosphonate, diethyl 2‐aminobutan‐2‐ylphosphonate, and diethyl 2‐aminooctan‐2‐ylphosphonate) with acryloyl chloride followed by the hydrolysis of phosphonate groups by using trimethylsilyl bromide. The properties such as pH in the range of mild self‐etching adhesives, hydrolytic stability, high rate of copolymerizations with 2‐hydroxyethyl methacrylate (HEMA) and HEMA/glycerol dimethacrylate, giving high‐molecular‐weight polymers on thermal polymerization, and strong decalcification ability of hydroxyapatite make these monomers good candidates for self‐etching adhesives, although no appreciable effect of the number and size of the α‐substituents was observed. Hydrogel scaffolds containing phosphonic acid groups were fabricated, characterized, and mineralized. Altogether, the results suggest that these phosphonic acid‐containing monomers have suitable properties to be used in fabrication of biomaterials for both dental and bone tissue engineering applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2755–2767     

Preparation and characterization of collagen/chitosan poly (ethylene glycol)/nanohydroxyapatite composite scaffolds

Porous three‐dimensional collagen/chitosan scaffolds combined with poly (ethylene glycol) (PEG) and hydroxyapatite were obtained through a freeze‐drying method. Physical cross‐linking was examined by dehydrothermal treatment. The prepared materials were characterized by different analyses, eg, scanning electron microscopy (SEM), measurements of porosity and swelling, mechanical properties, and resistance to enzymatic degradation. The porosity of scaffolds and their swelling ratio decreased with the addition of hydroxyapatite. Moreover, after exposure to collagenase, the collagen/chitosan matrices containing PEG showed much faster degradation rate than matrices with the addition of hydroxyapatite. The results indicated that the addition of hydroxyapatite led to improvement of stiffness. The highest degree of porosity and swelling were demonstrated by collagen/chitosan/PEG matrices without hydroxyapatite.