Supramolecular catalytic systems based on anionic amphiphiles and polyethyleneimine for hydrolytic cleavage of phosphorus ester bonds

Self-organization in individual and binary systems based on polyethyleneimine (PEI) and amphiphilic sulfonatocalix[4]resorcinarene was studied by conductometry, tensiometry, dynamic light scattering, and ¹H NMR spectroscopy. The critical concentrations of micelle formation and aggregate sizes were determined. The enhancement of the catalytic effect on the hydrolysis of O-ethyl O-p-nitrophenyl chloromethylphosphonate was shown in the following series of the systems: PEI-water < PEI—calixarene-water < PEI—calixarene—La^III—water. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 366–373, February, 2008.     

金属基体上铝溶胶涂层的制备

 以拟薄水铝石为原料,采用HNO3胶溶法制备了铝溶胶,研究了制备条件对胶体性质的影响. 结果表明,拟薄水铝石的含量和HNO3的加入量是影响胶体粒度大小、粒径分布以及胶体稳定性的重要因素. 当拟薄水铝石的含量为4.5%~5.5%、酸加入量为［H+］/［AlOOH］=0.08~0.1(摩尔比)时,可以得到颗粒度小(平均粒径≤19.3 nm),粒径分布范围窄(4.1~53 nm)和稳定性好的胶体溶液. 以该胶体为过渡涂层涂覆在金属基体上. 在能形成稳定胶体的前提下,酸度相同时,胶体的浓度越大,粘度越大,涂覆到基体上的量就越多; 但是过渡涂层的牢固度似乎与胶体的浓度关系不大. 金属基体的前处理条件也是一个重要的因素,它不仅影响过渡层的涂覆量,也影响涂层的牢固度.     

Palladium-catalyzed asymmetric 1,6-addition of diphenylphosphine to (4-aryl-1,3-butadienylidene)bis(phosphonates) for the synthesis of chiral phosphines

An asymmetric 1,6-addition of diphenylphosphine to (4-aryl-1,3-butadienylidene)bis(phosphonates) catalyzed by a PCP pincer–Pd complex has been developed for the synthesis of chiral allylic phosphines with up to 91% ee under mild conditions.     

Substrate specificity of camphor-induced cytochrome P-450 Immobilized on an electrode

The substrate specificity of a camphor-induced cytochrome P-450 (P-450_cam) was measured by using a new assay system: electrochemical control of P-450_cam activity by protein immobilization on an electrode. Immobilized P-450_cam showed the obvious substrate specificity for hydroxylation of the substrate, suggesting that the simple assay system is applicable for the study of the effect of the other components of the electron transfer system on activity. Copyright © 1998 John Wiley & Sons, Ltd.     

A highly specific immunoassay for microcystin-LR detection based on a monoclonal antibody

Microcystins (MC) are cyanobacterial hepatotoxins responsible for animal-poisoning and human health incidents. Immunoassays provide a sensitive and fast means to detect these toxins, but cross-reactivity (CR) characteristic of different antibodies was variable. Here, we have produced and characterized a monoclonal antibody (Clone MC8C10) with highly specificity against the most frequent and most toxic variant of microcystins, MC-LR. MC8C10 is more specific against MC-LR among the reported antibodies before. The immunogen was synthesized from the modified MC-LR and bovine serum albumin (BSA). An indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) with MC8C10 was established to detect the MCs in waters, which showed highly specificity with MC-LR, and have a detection limit for MC-LR 0.1 μg L⁻¹, the 50% inhibition concentration (IC₅₀) for MC-LR was 1.8 ± 0.1 μg L⁻¹ and the quantitative detection range was from 0.3 to 10 μg L⁻¹. The [4-arginine] microcystins and the nodularin-R showed lower cross-reactivates (CR < 10%), and other MCs such as MC-LF and MC-LW are not recognized (CR < 10⁻⁴). The analysis results of real water samples with ic-ELISA showed that all the coefficients of variation were less than 15%, and the recovery was (100.3 ± 5.9)%. So the highly specific ic-ELISA will commendably suit for sensitive analysis for MC-LR in surface water as well as drinking water.     

Read-across of ready biodegradability based on the substrate specificity of N-alkyl polypropylene polyamine-degrading microorganisms

The biodegradation of N-alkyl polypropylene polyamines (NAPPs) was studied using pure and mixed cultures to enable read-across of ready biodegradability test results. Two Pseudomonas spp. were isolated from activated sludge with N-oleyl alkyl propylene diamine and N-coco alkyl dipropylene triamine, respectively. Both strains utilized all NAPPs tested as the sole source of carbon, nitrogen and energy for growth. Mineralization of NAPPs was independent of the alkyl chain length and the size of the polyamine moiety. NAPPs degraded in closed bottle tests (CBTs) using both river water and activated sludge. However, ready biodegradability of NAPPs with alkyl chain lengths of 16–18 carbon atoms and polyamine moieties with three and four nitrogen atoms could not be demonstrated. Biodegradation in the CBT was hampered by their limited bioavailability, making assessment of the true ready biodegradability of these highly adsorptive surfactants impossible. All NAPPs are therefore classified as readily biodegradable through read-across. Read-across is justified by the broad substrate specificity of NAPP-degrading microorganisms, their omnipresence and the mineralization of NAPPs.     

Synthesis and Characterization of New Adhesion Promoter for Grafting Conducting Polymer on Oxide Substrate

For grafting polypyrrole layers on oxidic substrates, the synthesis and characterization of a new adhesion promoter 11‐(pyrrol‐3‐yl) undecyl trimethoxysilane (PyTMS) were described in this article. The oxidation potential of PyTMS was determined by cyclic voltammetry. The grafting behavior of such an adhesion promoter on oxidized surface and chemical deposition of polypyrrole over the modified oxidized surface were studied. The adsorbed layer on the oxidized substrates thus formed was determined by both contact angle measurements and X‐ray photoelectron spectroscopy. Chemical polymerization of terminal pyrrole moieties on such substrates yielded adhesive polypyrrole films, and SEM image showed that the morphology of the polypyrrole films was influenced by the experimental conditions.     

热轧对涂层导体用镍基带立方织构形成的影响

热机械加工制备的立方织构Ni及其合金带材广泛用于YBCO涂层导体的基带。涂层导体的制备要求基带具有强的立方织构和小的晶界角。通过在冷轧前进行热轧制备了强立方织构的镍基带。用三维取向分布函数（ODF）研究了轧制织构和再结晶织构，通过扫描电镜EBSD的观测，分析了晶粒取向分布和立方织构晶界微取向角分布。结果表明，冷轧前进行热轧有利于形成很强的立方织构和小的晶界微取向角。     

羰基还原酶辅酶结合域位点突变对其不对称催化性能的影响

基于同源模型的比较和分析,发现羰基还原酶SCR1辅酶结合域P124和W125位点对辅酶NADPH的结合形成了一定的空间位阻效应.通过对该位点进行小侧基氨基酸的取代突变,该酶的底物专一性和立体选择性均发生了不同程度的改变,表明该位点是酶与辅酶有效结合的关键位点,而且它与辅酶结合的空间效应进一步影响了底物结合域活性中心对不同构型的底物及其对映体产物的亲和作用.在底物专一性方面,野生型酶对2-羟基苯乙酮和2-溴苯乙酮及其衍生物等底物表现出较高的催化活性,而突变株W125A,W125G,P124A/W125A和P124G/W125G对苯乙酮及其部分衍生物和2-辛酮等底物的催化活性均有所提高.对于酶的立     

Comparison of predicted native structures of Met-enkephalin based on various accessible-surface-area solvent models

We examine the variation and similarity of the native structures predicted from various accessible-surface-area solvent models for peptide Met-enkephalin. Both ECEPP/2 and ECEPP/3 force fields have been used in conjunction with ten different sets of accessible-surface-area parameterization. The native structures were determined by an implementation of the basin hopping Monte Carlo technique. The results suggest that the implicit solvent models examined in this study should be employed in computer simulations with extreme caution. In addition, the effect of fixing or not fixing the peptide angles omega has been examined. We conclude that fixing omega generally gives rise to a poor prediction.     

Trinuclear Metal Complexes Based on 1,10-Phenanthroline Derivates as Catalysts for Cleavage of a RNA-Model Substrate

Two multidentate ligands 2,9-di[6'-(2″-hydroxyl-3″-methoxyphenyl)-n-2',5'-diazahexyl]-1,10-phenanthroline(LA)and 2,9-di(6'-α-phenol-n-2',5'-diazahexyl)-1,10-phenanthroline(LB)were synthesized and fully characterized.Protonation of the ligands and the stability of the complexes of the ligands with divalent metal ions were investigated.The trinuclear metal complexes [Cu(Ⅱ)and Zn(Ⅱ)] of the ligands were studied,as catalysts,for the transphosphorylation of the RNA-model substrate 2-hydroxypropyl-p-nitrophenyl phosphate(HPNP).The second-order rate constants of HPNP-hydrolysis catalyzed by M3L and M3LH-1 were obtained,which indicated that Zn3LBH-1 was the most efficient catalyst among them.The proposed mechanisms included the activation of the substrate via binding to the metal ions and intramolecular nucleophilic attack by the deprotonated C2-hydroxyl of HPNP.     

Performance of various activators in ethylene polymerization based on an iron(II) catalyst system

Ethylisobutylaluminoxane (EBAO) and its analogues were synthesized by a reaction between an triethylaluminum (Et₃Al)/triisobutylaluminum (i‐Bu₃Al) mixture and 4‐fluorobenzeneboronic acid, phenylboronic acid, or n‐butaneboronic acid and subsequent hydrolysis with water. They were used as cocatalysts in ethylene polymerization catalyzed by an iron complex {[(ArN?C(Me))₂C₅H₃N]FeCl₂, where Ar is 2,6‐diisopropylphenyl}. Polyethylene with a high molecular weight and a narrow molecular weight distribution was prepared with modified EBAOs, and the performance of the iron complex at high polymerization temperatures was greatly improved. The activators for the iron complex also affected the polymerization activity and the molecular weight of the resultant polyethylene. It was suggested that the stereo and electronic effects of the substitute groups of aluminoxane contributed to the improved performance of the new activators. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1093–1099, 2004     

A novel method for determination of peroxynitrite based on hemoglobin catalyzed reaction

A novel spectrofluorimetric method for the determination of peroxynitrite is proposed. The method is based on a mimetic enzyme catalyzed reaction with hemoglobin as the catalyst and l-tyrosine as the substrate. A new fluorescent substance is produced that might probably be the coupled dimmer of tyrosine, which, instead of nitryl-tyrosine, is likely to be a new marking substance of ONOO⁻ injury in vivo. Kinetics of the reaction is studied and the possible reaction mechanism is also recommended. The proposed method is simple and highly sensitive with a detection limit of 5.00 × 10⁻⁸ mol L⁻¹ of peroxynitrite. A liner calibration graph is obtained over the peroxynitrite concentration range 5.60 × 10⁻⁷ to 2.10 × 10⁻⁵ mol L⁻¹, with a correlation coefficient of 0.9983. Interferences from some amino acids and metal ions normally seen in biological samples, and also some anions structurally similar to ONOO⁻ are studied.     

Microtopography based on inverse opal structures regulates the behavior of bone marrow‐derived mesenchymal stem cells

Physical cues from the extracellular microenvironment play an important role in regulating cell behavior, such as adhesion, migration, and differentiation. Many studies have shown that different physical parameters (eg, stiffness and topography) could modulate the in vitro differentiation of mesenchymal stem cells (MSCs), which had multilineage differentiation potential and could be easily isolated from various tissues such as bone marrow, adipose tissue, and the umbilical cord. However, the underlying mechanism of the topographical influence on MSCs and the detailed cell‐substrate interaction remain unclear. Here, we present oriented elliptical inverse opal structures for regulating the morphology and alignment of bone marrow‐derived MSCs. The inverse opal structures were made through a convenient bottom‐up approach of self‐assembly, which is facile and cost effective. MSCs cultured on the oriented structures were highly aligned and extended highly oriented thick lamellipodia. Moreover, the oriented substrates cracked along the lateral boundary of the cells, suggesting that a strong cell‐substrate interaction was induced by the response of MSCs to the oriented topography. These features of the oriented elliptical topography indicated their promising value in stem cell research and tissue engineering.     

硅晶片上超薄氧化硅层厚度纳米尺寸效应的XPS研究

用X射线光电子能谱(XPS)测定了一系列厚度经过国际比对准确已知的硅晶片上的超薄(1.45nmd7.2nm)氧化硅膜的Si2p电子能谱和价带谱.结果表明:SiO2膜厚d2nm时,Si2p结合能最低,其原因可归结于此时光电离空穴既有来自SiO2中的原子极化对空穴的原子外弛豫,也有来自衬底Si的电荷移动对空穴的屏蔽(有效屏蔽距离大约是(2.5±0.6)nm);当d3nm时Si2p结合能增大,此时只有来自SiO2的原子外弛豫,d较小者的Si2p结合能较高.SiO2的价带电子结构也与其厚度纳米尺寸效应有关:当d2nm时价带中SiO2的O2p非成键电子峰的相对强度较强,O2p—Si3p和O2p—Si3s成键电子峰较弱.     

A new method for cleavage of silicon-carbon linkers on glass plate supports with applications to solid-phase syntheses on silica resins

We describe herein a novel and facile method for the cleavage of a silicon-based linker on solid-phase supports such as glass plates or silica resin. The linker was efficiently cleaved by oxidation of the silicon-carbon bond (Tamao-Kumada oxidation) to release the functionalized molecule.     

Polymeric pH indicators immobilized PVA membranes for optical sensors of high basicity based on a kinetic process

Two kinds of polymeric pH indicators PPF (phenolphthalein-formaldehyde product) and CPF (o-cresolphthalein-formaldehyde product) immobilized cross-linked poly(vinyl alcohol) membranes (PPF-PVA and CPF-PVA) for optical intermittent determination of high basicity ([OH⁻] = 1-8 M) based on a kinetic process were developed. In our previous work, we had demonstrated that PPF-PVA and CPF-PVA could perform the determination of high pH values from pH 10.0 to 14.0. Here the discoloring kinetic behaviors of PPF-PVA and CPF-PVA were compared with those of free phenolphthalein, o-cresolphthalein and thymolphthalein. Experimental results and theoretical analysis indicated that the response behaviors of the optodes’ membranes in concentrated NaOH solutions were diffusion-independent and still complied with the pseudo-first-order kinetics. In addition, two data analysis methods for determination were presented. One was directly based on the reduced absorbance; the other was based on the discoloring kinetic constant. It was found that the latter could perform a rapid (60 s) and reliable (relative standard deviation: 2.6%) determination for high basicity. These kinds of optodes can be used repeatedly when they are immersed in low-pH solutions to regain the protonated form after each determination.     

Effect of hapten structures on specific and sensitive enzyme-linked immunosorbent assays for N-methylcarbamate insecticide metolcarb

Five different haptens of the N-methylcarbamate insecticide metolcarb were designed and synthesized. All of the haptens were conjugated with ovalbumin (OVA) for the coating antigen, and one hapten containing all of the structure of metolcarb was conjugated with bovine serum albumin (BSA) for the immunogen. Two polyclonal antisera were raised against the BSA conjugate, and ten antibody/coating conjugate combinations were selected for studies of assay sensitivity and specificity for metolcarb. A class-specific combination was found, with the I₅₀ of the assay ranged from 0.64 to 20.98 μg mL⁻¹ for seven tested N-methylcarbamate insecticides except for pirimicarb. Considering titer, I₅₀ and cross-reactivity of all combinations of antibody/coating conjugate, a competitive indirect enzyme-linked immunosorbent assay (ELISA) in a homologous system, whose limit of detection (LoD) reached 1.4 ng mL⁻¹, was presented. The results of competitive ELISAs indicated that coating hapten structure can significantly affect not only assay sensitivity but also its specificity.     

Enhanced properties of photovoltaic devices tailored with novel supramolecular structures based on reduced graphene oxide nanosheets grafted/functionalized with thiophenic materials

For verifying the influence of donor–acceptor supramolecules on photovoltaic properties, different hybrids were designed and used in organic solar cells. In this respect, reduced graphene oxide (rGO) was functionalization with 2‐thiophene acetic acid (rGO‐f‐TAA) and grafted with poly(3‐dodecylthiophene) (rGO‐g‐PDDT) and poly(3‐thiophene ethanol) (rGO‐g‐PTEt) to manipulate orientation of poly(3‐hexylthiophene) (P3HT) assemblies. Face‐on, edge‐on, and flat‐on orientations were detected for assembled P3HTs on rGO and its functionalized and grafted derivatives, respectively. Alteration of P3HT orientation from face‐on to flat‐on enhanced current density (J _sc), fill factor (FF), and power conversion efficiency (PCE) and thus J _sc = 7.11 mA cm^?2, FF = 47%, and PCE = 2.14% were acquired. By adding phenyl‐C71‐butyric acid methyl ester (PC71BM) to active layers composed of pre‐designed P3HT/rGO, P3HT/rGO‐f‐TAA, P3HT/rGO‐g‐PDDT, and P3HT/rGO‐g‐PTEt hybrids, photovoltaic characteristics further improved, demonstrating that supramolecules appropriately mediated in P3HT:PC71BM solar cells. Phase separation was more intensified in best‐performing photovoltaic systems. Larger P3HT crystals assembled onto grafted rGOs (95–143 nm) may have acted as convenient templates for the larger and more intensified phase separation in P3HT:PCBM films. The best performances were reached for P3HT:P3HT/rGO‐g‐PDDT:PCBM (J _sc = 9.45 mA cm^?2, FF = 54%, and PCE = 3.16%) and P3HT:P3HT/rGO‐g‐PTEt:PCBM (J _sc = 9.32 mA cm^?2, FF = 53%, and PCE = 3.11%) photovoltaic systems. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 1877–1889     

Water-soluble dendritic core-shell-type architectures based on polyglycerol for solubilization of hydrophobic drugs

Since many potential drugs are poorly water soluble, there is a high demand for solubilization agents. Here, we describe the synthesis of dendritic core-shell-type architectures based on hyperbranched polyglycerol for the solubilization of hydrophobic drugs. Amphiphilic macromolecules containing hydrophobic biphenyl groups in the core were synthesized in an efficient three- or four-step procedure by employing Suzuki-coupling reactions. These species were then used to solubilize the commercial drug nimodipine, a calcium antagonist used for the treatment of heart diseases and neurological deficits. Pyrene was also used as a hydrophobic model compound. It turned out that the transport properties of the dendritic polyglycerol derivatives, which are based on hydrophobic host-guest interactions, depend strongly on the degree and type of core functionalization. In the case of the multifunctional nimodipine, additional specific polymer-drug interactions could be tailored by this flexible core design, as detected by UV spectroscopy. The enhancement of solubilization increased 300-fold for nimodipine and 6000-fold for pyrene at a polymer concentration of 10 wt%. The sizes of the polymer-drug complexes were determined by both dynamic light scattering (DLS) experiments and transmission electron microscopy (TEM), and extremely well-defined aggregates with diameters of approximately 10 nm in the presence of a drug were observed. These findings together with a low critical aggregate concentration of 4x10(-6) mol L-1 indicate the controlled self-assembly of the presented amphiphilic dendritic core-shell-type architectures rather than a unimolecular transport behavior.