Preparation of novel and unique nonspherical particles with almond-shell-like shape via dual-seeded dispersion polymerization in the presence of saturated hydrocarbon droplets

In this study, the preparation of micron-sized polymer particles having a novel and unique nonspherical shape which we called almond-shell-like by dual-seeded dispersion polymerization (DSDP) of 2-ethylhexyl methacrylate (EHMA) with polystyrene (PS) and poly(methyl methacrylate) (PMMA) seed particles in the presence of decane droplets and evaporation of decane after the polymerization was discussed. The experimental results showed that mushroom-like morphology which is a precursor of the almond-shell-like shape was obtained from DSDP of EHMA. It was found that with changing the PS/PMMA seed particles' weight ratio, the size of the dents on the surface of the particles can be controlled. Furthermore, it was observed that various nonspherical particles can be produced using different methacrylic seed particles and initiators.     

Dual-seeded dispersion polymerization: Effect of different polymerization conditions on the shape of the produced particles

Dual-seeded dispersion polymerization (DSDP) of 2-ethylhexyl methacrylate with polystyrene (PS) and poly(methyl methacrylate) (PMMA) seed beads in the presence of saturated hydrocarbon droplets followed by evaporation of the hydrocarbon was studied. The effect of various polymerization conditions including initiator type and content, stabilizer type and concentration, and different hydrocarbon’s content on the shape of the obtained particles was investigated. The increase of concentration of 2,2'-azobis(isobutyronitrile) (AIBN) had no effect on the shape of the produced almond-shell-like PS particles, although it contributes in the formation of associated composite particles along with larger poly(2-ethylhexyl methacrylate) (PEHMA) beads produced by secondary nucleation. The experimental results showed that other initiators led to the formation of stable golf-ball-like PMMA particles as well as PS ones with symmetric shape. The type of stabilizer did not affect the shape of the particles. This observation suggests that unique almond-shelllike PS particles can be produced through a stabilizer-free DSDP process. The lowering of the concentration of hydrocarbons with long alkyl chains yielded stable disc-like PMMA particles. The formation of functional almond-shell-like particles by using light hydrocarbons was another interesting finding of this research.     

Effect of monomer and hydrocarbon content and polarity of the medium on the preparation of nonspherical particles via seeded dispersion polymerization in the presence of saturated hydrocarbon droplets

In this work, the preparation of micron-sized polymer particles with nonspherical shapes via seeded dispersion polymerization of 2-ethylhexyl methacrylate (EHMA) with polystyrene (PS) seed particles in the presence of decane droplets and evaporation of decane after the polymerization under various polymerization conditions was discussed. The effect of monomer and decane content and polarity of the medium on the shape of the obtained particles was investigated. The experimental results showed that decreasing the amount of monomer and hydrocarbon volume of PEHMA/hydrocarbon domains, the particles decreased but they grew symmetrically, resulting in symmetric shapes. Furthermore, it was suggested that because of changing the solubility of the oligoradicals and hydrocarbon in the medium, the shape of the particles changed with changing the polarity of the medium. With decreasing the polarity of the medium, solubility of the oligoradicals in the medium increases and bigger polymer domains form on the surface of PS particles which can absorb higher amounts of decane. All of these can contribute to an increase in volume reduction after extraction of PEHMA/decane, resulting in various particle shapes. Further decreasing in polarity of the medium leads to an increase in the solubility of decane in the medium and decreasing the absorbed amount of decane by PS particles and PEHMA domains, resulting in lower volume reduction after evaporation of decane.     

Facile Method to Synthesis of Golf Ball-Like Particles via Early-Ceased Seeded Dispersion Polymerization

Golf ball-like poly(methyl methacrylate) particles were produced via seeded dispersion polymerization of 2-ethylhexyl methacrylate with poly(methyl methacrylate) seed beads in the presence of saturated hydrocarbon droplets and evaporation of the hydrocarbon after the polymerization. It was observed that the particles are acquired in the form of a stable dispersion if the reaction is ceased around 42% of monomer conversion. Moreover, the effect of different reaction conditions (e.g. hydrocarbon and stabilizer type, initiator and monomer content, and polarity of the medium) on the shape and stability of the produced particles was investigated. It was revealed that the number and size of the dents on the surface of the golf ball-like particles could be manipulated easily with a simple change in each one of the parameters referred to above. In addition, the experimental results showed that some of the particles become unstable and diffuse into each other during polymerization, resulting in the formation of huge golf ball-like objects. The production of disk-like poly(methyl methacrylate) particles via fully developed seeded dispersion polymerization in the presence of a hydrocarbon which owns lengthy alkyl chain was another interesting finding of this study.     

Preparation of micron-sized, monodisperse poly(methyl methacrylate)/polystyrene composite particles having a large number of dents on their surfaces by seeded dispersion polymerization in the presence of decalin

Seeded dispersion polymerization of styrene with 1.77-µm-sized, monodisperse poly(methyl methacrylate) seed particles was carried out in a methanol/water medium (8/2, w/w) in the presence of decalin droplets. The monodisperse poly(methyl methacrylate)/polystyrene composite particles produced had a large number of dents on their surfaces. The effects of the amount of decalin in the polymerization system on the number, the diameter, and the depth of the dents on the surface of the composite particles were clarified.     

Effect of graft polymer on the formation of micron-sized,monodisperse, "onion-like" alternately multilayered poly(methyl methacrylate)/polystyrene composite particles by reconstruction of morphology with the solvent-absorbing/releasing method

Some factors contributing to the formation of an alternately multilayered structure of micron-sized, monodisperse poly(methyl methacrylate) (PMMA)/polystyrene (PS) (1/1, w/w) composite particles by reconstruction of the morphology with the solvent-absorbing/releasing method (SARM) were discussed. The original composite particles, which were produced by seeded dispersion polymerization (SDP) of styrene, had a core–shell structure. When PS/PMMA (1/1, w/w) composite particles produced by SDP of methyl methacrylate were treated by the SARM with toluene, the reconstructed morphology of the composite particles was not the multilayered structure but a hemisphere (or core–shell). The PS/PMMA composite particle contained less than 10 wt% PMMA- g-PS. On the other hand, the PMMA/PS composite particles contained about 40 wt% graft polymer. The graft polymer would exist at the interfaces of the alternate multilayers and decrease their interfacial energy. This was the main reason why the alternately multilayered structure was constructed by the SARM, though the total interfacial area between PMMA and PS layers in the multilayered particle is much larger than that of the hemisphere (or core–shell).     

Production of micron-sized, monodispersed, multilayered composite polymer particles by multistep seeded dispersion polymerization

 Micron-sized, monodispersed, poly(methyl methacrylate) (PMMA)/polystyrene (PS)/PMMA/PS multilayered composite particles were successfully produced by three-step seeded dispersion polymerizations in methanol/water media. The first seeded dispersion polymerization was carried out with 2-μm-sized, monodispersed PMMA particles.     

Thermodynamic and kinetic considerations on the morphological stability of “hamburger-like” composite polymer particles prepared by seeded dispersion polymerization

Micrometer-sized, monodisperse, “hamburger-like” polystyrene (PS)/poly(2-ethylhexyl methacrylate)/decane composite particles were obtained by seeded dispersion polymerization of 2-ethylhexyl methacrylate with PS seed particles in the presence of decane. The morphological stability of the hamburger-like particles was investigated based on thermodynamic and kinetic aspects. The hamburger-like morphology was maintained at 60 °C (above glass transition temperature (T _g)) for at least 1 week in spite of less thermodynamic stability than hemispherical morphology. T _g of the particles gradually increased throughout the polymerization due to monomer consumption. Geometric calculation result indicates that the degree of reduction of the interfacial free energy at the early stage of the morphological development is significantly low. From these results, it is concluded the morphological stability of the hamburger-like particles is considerably high because the development from hamburger-like to hemispherical morphologies is retarded by the gradual increase in viscosity inside the particles and the significantly lower interfacial free energy reduction.     

Preparation of micron-sized composite polymer particles containing hydrophilic 2-hydroxyethyl methacrylate and their biomedical applications

Micron-sized polystyrene or PS particles were first prepared by dispersion polymerization. Then a series of polystyrene/poly(styrene-2-hydroxyethyl methacrylate) or PS/P(S-HEMA) composite polymer particles was prepared by seeded copolymerization using different amounts of 2-hydroxyethyl methacrylate (HEMA) at the constant core/shell ratio of 1/0.5. The produced PS seed and composite polymer particles were characterized by transmission electron microscopy. Adsorption behaviors of some biologically active macromolecules were studied under similar conditions. In each case the magnitude of adsorption on composite polymer particles decreased with the increase in HEMA content in the recipe, which means that the hydrophobic interaction between the surface of the particles and biomolecules decreased. The specific activities of trypsin aqueous solution and adsorbed trypsin on PS seed and composite polymer particles prepared with different HEMA contents were also measured and compared. The activity of adsorbed trypsin on composite polymer particles improved significantly with the incorporation of hydrophilic HEMA.     

Morphology of micron-sized monodispersed composite polymer particles produced by seeded polymerization for the dispersion of highly monomer-swollen polymer particles

 Monodispersed polystyrene (PS)/poly(n-butyl methacrylate) (PBMA) composite particles having 9.4 μm in diameter were produced by seeded polymerization for the dispersion of highly n-butyl methacrylate (BMA)-swollen PS particles, and their morphologies were examined. The highly BMA-swollen PS particles (about 150 times the weight of the PS seed particles) were prepared by mixing monodispersed 1.8 μm-sized PS seed particles and 0.7 μm sized BMA droplets prepared with an ultrasonic homogenizer in ethanol/water (1/2, w/w) medium at room temperature. After NaNO₂ aqueous solution as inhibitor was added in the dispersion, the seeded polymerization was carried out at 70 °C. In an optical microscopic observation, one or two spherical high contrast regions which consisted mainly of PS were observed inside PS/PBMA composite particles. In the PS domain, there were many fine spherical PBMA domains. Such morphologies were based on the phase separation of PS and PBMA within the homogeneous swollen particles during the seeded polymerization. Received: 04 June 1997 Accepted: 27 August 1997     

Influence of viscosity within polymerizing particle on the morphology of micron-sized,monodisperse composite polymer particles produced by seeded polymerization for the dispersion of highly monomer-swollen polymer particles

Micron-sized, monodisperse polystyrene (PS)/poly( n-butyl methacrylate) (PBMA) composite particles, in which PS domain(s) were dispersed in a PBMA continuous phase, were produced by seeded polymerization for the dispersion of highly n-butyl methacrylate (BMA)-swollen PS particles (PS/BMA=1/150, w/w) using various concentrations of benzoyl peroxide as initiator in the absence/presence of sodium nitrite (NaNO ₂) as a water-soluble inhibitor. The percentages of the composite particles having double, triple and over PS domains, which were thermodynamically unstable morphologies, increased with a rapid increase of viscosity within the polymerizing particle.     

Influence of the swelling state of seed polymer particles with monomer on the morphology of micron-sized monodispersed composite polymer particles produced by seeded polymerization utilizing the dynamic swelling method

 Micron-sized mono-dispersed polystyrene (PS)/poly(n-butyl methacrylate) (PBMA) composite particles (PS/PBMA=2/1 by weight) having a heterogeneous structure in which many fine PBMA domains dispersed in a PS matrix near the particle surface were produced by seeded polymerization of n-butyl methacrylate (BMA) of which almost all had been absorbed by 1.8 μm-sized monodispersed PS seed particles utilizing the dynamic swelling method. The morphology was varied by changing the PS/BMA ratio and polymerization temperature. It was concluded that the swelling state of 2 μm-sized BMA-swollen PS particles in the seeded polymerization process is one of the important factors to control the morphology of the composite particles. Received: 27 November 1996 Accepted: 21 March 1997     

Rapid Synthesis of Monodisperse Polystyrene Microspheres and Self-Assembly of Colloidal Crystals on Mica

Polystyrene (PS) colloidal particles were prepared in aqueous solution by a quick emulsifier-free emulsion polymerization (EFEP) method. The scanning electron microscopy (SEM) images indicate that the as-synthesized particles have good sphericity and uniform size (dispersion coefficient C_v is less than 5%). The monodisperse PS microspheres with different diameter were obtained easily by varying the monomer concentration. The atomic force microscopy (AFM) images show that the PS microspheres were self-assembled into three-dimensional ordered structure on micas by dropping-casting method. The self-assembly method is simple and quick. Based on the experimental results, a possible self-assembly mechanism was proposed.     

Preparation of nonspherical particles via dual-seeded dispersion polymerization in the presence of saturated hydrocarbon droplets

In this study, the effect of various polymerization conditions on the shape of the particles produced by dual-seeded dispersion polymerization of a second monomer with polystyrene (PS) and poly(methyl methacrylate) (PMMA) seed particles in the presence of saturated hydrocarbon droplets in a polar media was discussed. It was observed that with changing the affinity between the hydrocarbon and PS seed particles, second monomer type, polarity, and alcohol type of the medium nonspherical particles with a variety of shapes can be produced. Furthermore, we suggested that the presence of PMMA seed particles in the medium affects the distribution of the second polymer domains on the surface of the PS seed particles in addition to the absorbed amount of the hydrocarbon by PS particles and second polymer domains and the distribution of the hydrocarbon between them. Moreover, the experimental results showed that almond shell-like PS particles can be prepared under certain conditions.     

Polymerization-induced self-assembly of metallo-polyelectrolyte block copolymers

Cobaltocenium-containing polyelectrolyte block copolymer nanoparticles were prepared via polymerization-induced self-assembly (PISA) using aqueous dispersion RAFT polymerization. The cationic steric stabilizer was a macromolecular chain-transfer agent (macro-CTA) based on poly(2-cobaltocenium amidoethyl methacrylate chloride) (PCoAEMACl), and the core-forming block was poly(2-hydroxypropyl methacrylate) (PHPMA). Stable cationic spherical nanoparticles were formed in aqueous solution with low dispersity without adding any salts. The chain extension of macro-CTA with HPMA was efficient and fast. The effects of block copolymer compositions, solid content, charge density, and addition of salts were studied. It was found that the degree of polymerization of both the stabilizer PCoAEMACl and the core-forming PHPMA had a strong influence on the size of nanoparticles. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 77–83     

Surface modification of polystyrene latex particles via atom transfer radical polymerization

The atom transfer radical polymerization (ATRP) technique using the copper halide/ N,N′,N′,N″,N″‐pentamethyldiethylenetriamine complex was applied to the graft polymerization of methyl methacrylate and methyl acrylate on the uniform polystyrene (PS) seed particles and formed novel core‐shell particles. The core was submicron crosslinked PS particles that were prepared via emulsifier‐free emulsion polymerization. The crosslinked PS particles obtained were transferred into the organic phase (tetrahydrofuran), and surface modification using the chloromethylation method was performed. Then, the modified seed PS particles were used to initiate ATRP to prepare a controlled poly(methyl methacrylate) (PMMA) and poly(methyl acrylate) (PMA) shell. The final core‐shell particles were characterized using Fourier transform infrared spectroscopy, nuclear magnetic resonance, scanning electron microscopy, thermogravimetric analysis, and elementary analysis. The grafting polymerization was conducted successfully on the surface of modified crosslinked PS particles, and the shell thickness and weight ratio (PMMA and PMA) of the particles were calculated. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 892–900, 2002; DOI 10.1002/pola.10160     

悬浮-乳液复合聚合聚苯乙烯-聚甲基丙烯酸甲酯复合粒子的颗粒特性和成粒机理

采用在苯乙烯 (St)悬浮聚合过程中滴加甲基丙烯酸甲酯 (MMA)乳液聚合组分的悬浮 乳液复合聚合方法 ,制备大粒径聚苯乙烯 聚甲基丙烯酸甲酯 (PS PMMA)复合粒子 .研究聚合物粒径分布和颗粒形态的变化发现 ,在St悬浮反应中期滴加MMA乳液聚合组分后 ,聚合体系逐渐由悬浮粒子与乳胶粒子并存向形成单峰分布复合粒子转变 ,最终形成核 壳结构完整的大粒径PS PMMA复合粒子 ;在St悬浮反应初期滴加MMA乳液聚合组分 ,St与MMA一起分散成更小液滴 ,反应后期凝并成非核 壳结构复合粒子 ;在St悬浮反应后期滴加MMA乳液聚合组分 ,PMMA乳胶粒子与PS悬浮粒子基本独立存在 .根据以上结果 ,提出了St MMA悬浮 乳液复合聚合的成粒机理 .     

Morphology of micron-sized monodispersed poly(butyl methacrylate)/polystyrene composite particles produced by seeded dispersion polymerization

In order to develop the seeded dispersion polymerization technique for the production of micron-sized monodispersed core/shell composite polymer particles the effect of polymerization temperature on the core/shell morphology was examined. Micron-sized monodispersed composite particles were produced by seeded dispersion polymerizations of styrene with about 1.4-μm-sized monodispersed poly(n-butyl methacrylate) (Pn-BMA) and poly(i-butyl methacrylate) (Pi-BMA) particles in a methanol/water (4/1, w/w) medium in the temperature range from 20 to 90 °C. The composite particles, PBMA/polystyrene (PS) (2/1, w/w), consisting of a PBMA core and a PS shell were produced with 2,2′-azobis(4-methoxy-2,4-dimethyl valeronitrile) initiator at 30 °C for Pn-BMA seed and with 2,2′-azobis(isobutyronitrile) initiator at 60 °C for Pi-BMA seed. The polymerization temperatures were a little above the glass-transition temperatures (T _g) of both Pn-BMA (20 °C) and Pi-BMA (40 °C). On the other hand, when the seeded dispersion polymerizations were carried out at much higher temperatures than the T _g of the seed polymers, composite particles having a polymeric oil-in-oil structure were produced. Received: 14 October 1998 Accepted in revised form: 2 June 1999     

Surface Functionalization Methods to Enhance Bioconjugation in Metal-Labeled Polystyrene Particles

Lanthanide-encoded polystyrene particles synthesized by dispersion polymerization are excellent candidates for mass cytometry based immunoassays, however they have previously lacked the ability to conjugate biomolecules to the particle surface. We present here three approaches to post-functionalize these particles, enabling the covalent attachment of proteins. Our first approach used partially hydrolyzed poly(N-vinylpyrrolidone) as a dispersion polymerization stabilizer to synthesize particles with high concentration of -COOH groups on the particle surface. In an alternative strategy to provide -COOH functionality to the lanthanide-encoded particles, we employed seeded emulsion polymerization to graft poly(methacrylic acid) (PMAA) chains onto the surface of these particles. However, these two approaches gave little to no improvement in the extent of bioconjugation. In our third approach, seeded emulsion polymerization was subsequently used as a method to grow a functional polymer shell (in this case, poly(glycidyl methacrylate) (PGMA)) onto the surface of these particles, which proved highly successful. The epoxide-rich PGMA shell permitted extensive surface bioconjugation of NeutrAvidin, as probed by an Lu-labeled biotin reporter (ca. 7 × 10(5) binding events per particle with a very low amount of non-specific binding) and analyzed by mass cytometry. It was shown that coupling agents such as EDC were not needed, such was the reactivity of the particle surface. These particles were stable and the addition of a polymeric shell was shown did not affect the narrow lanthanide ion distribution within the particle interior as analyzed by mass cytometry. These particles represent the most promising candidates for the development of a highly multiplexed bioassay based on lanthanide-labeled particles to date.     

Synthesis of polystyrene/SiO2 composite microparticles by dispersion polymerization in supercritical fluid

A novel synthetic route to prepare polystyrene/SiO₂ composite microparticles in supercritical carbon dioxide (scCO₂) is presented. Silica particles with the size of 130 nm which were surface-modified with 3-(trimethoxysilyl) propyl methacrylate were used as seeds in the dispersion polymerization of styrene in the presence of a polymeric stabilizer, poly(1,1-dihydroheptafluorobutyl methacrylate-co-diisopropylaminoethyl methacrylate) to produce dry composite particles. The transmission electron microscopy analysis revealed that the composite microspheres contained several silica particles.