“Smart” carboxymethylchitosan hydrogels crosslinked with poly(N-isopropylacrylamide) and poly(acrylic acid) for controlled drug release

Carboxymethylchitosan (CMC) hydrogels containing thermo-responsive poly(N-isopropylacrylamide) (poly(NIPAAm)) and pH-responsive poly(acrylic acid) (poly(AA)) were prepared via a free radical polymerization in the presence of hexamethylene-1,6-di-(aminocarboxysulfonate) crosslinking agents. A proper ratio of CMC to NIPAAm and AA used in the reaction was investigated such that the thermo- and pH-responsive properties of the hydrogels were obtained. Water swelling of the hydrogels was improved when the solution pH was in basic conditions (pH 10) or the temperature was below its lower critical solution temperature (LCST). Effects of the change in solution temperature and pH on water swelling properties of the hydrogel as well as the releasing rate of an entrapped drug were also investigated. The hydrogels were not toxic and showed antibacterial activity against Straphylococcus aureus (S. aureus). The pH- and thermo-responsive properties of this novel “smart” hydrogel might be efficiently used as dual triggering mechanisms in controlled drug release applications.     

Novel temperature-sensitive, β-cyclodextrin-incorporated poly(N-isopropylacrylamide) hydrogels for slow release of drug

Novel temperature-sensitive poly(N-isopropylacrylamide) hydrogels containing water-soluble -cyclodextrin polymer were prepared by forming semi-interpenetrating polymeric networks. Compared to the conventional poly(N-isopropylacrylamide) gel, the -cyclodextrin-incorporated hydrogels showed the same lower critical solution temperature due to the independence of the -cyclodextrin polymer in the networks. The release time of ibuprofen from the novel gel was significantly prolonged, which was presumably attributed to the formation of the inclusion complexes between the cyclodextrin groups and the drug molecules.Jian-Tao Zhang and Shi-Wen Huang have contributed equally to this work.     

Effects of acrylic acid incorporation on the pressure–temperature behavior and the calorimetric properties of poly(N-isopropylacrylamide) in aqueous solutions

 We studied the effects of pH on the pressure–temperature dependence of coil–collapse transition for aqueous solutions of copolymers of N-isopropylacrylamide and acrylic acid (Ac). At low pressures, the transition temperature (T _tr) increased with pressure, but T _tr decrease with increasing pressure at pressures higher than 50–100 MPa. By increasing the pH, the transition contour shifted to a higher temperature. When the Ac content was increased, the effects of pH became more evident. From a calorimetric study at atmospheric pressure, ΔH _tr was found to become smaller by increasing the portion of the ionized residues in the copolymer. The ratio to the van't Hoff enthalpy changes became larger with an increase in pH, which indicated that the production of charge decreased the cooperative domain size. Received: 19 July 1999 /Accepted in revised form: 7 September 1999     

Recent progress of poly (N-isopropylacrylamide) hybrid hydrogels: synthesis,fundamentals and applications – review

Hydrogels, having nanomaterials (e.g. nanoparticles and nanorods) incorporated inside their polymeric meshes, are generally called hybrid gels/hydrogels. These assemblies combine the properties of both hydrogels and nanomaterials in one system. These responsive hybrid hydrogels, particularly polymerized N-isopropylacrylamide (PoNip) polymeric gels, have been extensively exploited for various multi-disciplinary applications in the literature over the past two decades because of their unique and exquisite particulars. Next generation assemblies have been prepared by using the smart nature of these gels toward the general incentives (e.g. temperature, ionic strength, and pH) in the fields of nanocatalysis, water purification, drug delivery, photonics, and optics. This review presents an overview of the PoNip hybrid assemblies engineered over the past 7 years i.e. 2010–2016 and extensively discusses the interaction of the incorporated nanomaterial with the polymeric chains of the hydrogels as it is the most significant factor which makes these assemblies attractive for all the associated applications. Moreover, this article also describes the preparative routes, properties, classification, and applications of these hybrid hydrogels in the fields of medicine, environment, catalysis, and nanotechnology.     

Reentrant behavior of poly(vinyl alcohol)–borax semidilute aqueous solutions

 The reentrant behavior of Poly(vinyl alcohol) (PVA)–borax aqueous semidilute solutions with a PVA concentration of 20 g/l and borax concentrations varies from 0.0 to 0.20 M was investigated using dynamic light scattering (DLS) and dynamic viscoelastic measurements. Two (fast and slow modes) and three (fast, middle, and slow) relaxation modes of PVA semidilute aqueous solutions without and with the presence of borax, respectively, were observed from DLS measurements. The fast and middle relaxation modes were q ²-dependent (q is the scattering vector) characteristic of diffusive behavior; however, the slow modes were q ³-dependent, characteristic of intraparticle dynamics. The experimental results showed that the slow relaxation mode dominates the DLS relaxation. The DLS slow mode relaxation time, τ_s, and the viscoelastic modulus G′(ω) and G′′(ω) data had a similar trend and demonstrated reentrant behavior as the borax concentration was increased from 0.0 to 0.20 M, i.e. τ_s, G′(ω), and G′′(ω) fluctuated with increasing borax concentration. The excluded-volume effect of polymers, charge repulsion among borate ions bound on PVA molecules, and intermolecular cross-linking didiol–borate complexation caused an expansion of the polymer chain; however, the screening effect of free Na⁺ ions on the negative charge of the borate ions bound on PVA and intramolecular cross-linking didiol–borate complexation led to a shrinkage of the polymer chain. The reentrant behavior was the consequence of the balance between expansion and shrinkage of the PVA–borate complex. Received: 26 March 1999/Accepted in revised form: 3 September 1999     

Solubility of naphthalene in aqueous solutions of poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) triblock copolymers and (2-hydroxypropyl)cyclodextrins

The solubility of naphthalene was investigated in aqueous solutions of triblock copolymers poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) (PEG–PPG–PEG) and (2-hydroxypropyl)cyclodextrins. The results with solutions of the individual solubilizers were as expected: the solubility enhancement was much higher with a micelle-forming copolymer than with the non-micellizing one and with (2-hydroxypropyl)--cyclodextrin (HPBCD) than with (2-hydroxypropyl)--cyclodextrin (HPACD). Although the formation of inclusion complexes between HPACD and PEG and between HPBCD and PPG is well established, the naphthalene solubility in mixed solutions does not significantly deviate from that predicted for a mixture of independent solubilizers. Thus the interactions between HPCD and PEG–PPG–PEG copolymers are not strong enough to disrupt micelles and aggregates formed by those copolymers. In fact, slight synergetic deviations were observed with the micellizing copolymer, indicating the existence of ternary naphthalene/HPCD/copolymer interactions. For pharmaceutical applications, it is important that the solubilization efficacy of PEG–PPG–PEG copolymers and that of cyclodextrins modified by the 2-hydroxypropyl group would not be compromised if these two types of solubilizers were co-administered.     

Chemical–physical behavior of hydrogels of poly(vinyl alcohol) and poly(ethylene glycol)

New hydrogels based on polyethylene glycol (PEG) and poly(vinyl alcohol) (PVA) of different degrees of hydrolysis were synthesized. To form the network the PEG was modified at their ends with acyl chloride groups to be used as the crosslinking agent. The compositions of the hydrogels were between 50% and 90% by weight of PEG and PVA of various degrees of hydrolysis were used. It was found that the degree of hydrolysis of the PVA and the PEG content influence the equilibrium water content of the hydrogel. The process of swelling of all the hydrogels prepared followed a second-order kinetics.     

Swelling–shrinking behaviors of poly(N-isopropylacrylamide) and poly(N-n-propylacrylamide) gels prepared by chemical and radiation crosslinking methods

The swelling and shrinking kinetics of thermosensitive gels based on N-isopropylacrylamide (NiPAAm) and N-n-propylacrylamide (NnPAAm) were studied. Four gels cylindrical in shape were prepared by two different methods: γ-ray irradiation to aqueous solutions of poly(NiPAAm) (PNiPAAm) or poly(NnPAAm) (PNnPAAm) and redox polymerization of NiPAAm or NnPAAm monomer using N,N′-methylenebisacrylamide as a crosslinker. There were a few differences in the swelling kinetics among these gels. However, a marked difference was observed in the shrinking processes, the rate of which was faster in the order of radiation-crosslinked PNiPAAm gel > radiation-crosslinked PNnPAAm gel > chemically crosslinked PNnPAAm gel > chemically crosslinked PNiPAAm gel. This difference was discussed in terms of the microscopic structure of the gels, which was studied by light scattering techniques. It was found that the static inhomogeneities frozen in the chemically and radiation-crosslinked gels play a key role in their shrinking kinetics.     

Electron transfer quenching of tris(2,2′-bipyridine) ruthenium (II) complex derivatives covalently linked to poly (N-isopropylacrylamide) in aqueous solutions

Tris(2,2-bipyridine) ruthenium(II) complex, ionic probe, was incorporated into poly (N-isopropylacrylamide) (PNIPA), which is known to be a thermoresponsive polymer, by a copolymerization method. Electron transfer quenching of the complex probe by methyl viologen was investigated as a function of temperature. The electron transfer quenching rate constant (k _q) in a globular state (higher temperature than the LCST (31°C)) is 4–5 times as large as that in a coil state (lower temperature) from the Stern-Volmer analysis. The result is quite different from the quenching of pyrene probe incorporated into PNIPA in the previous study. This is because hydrophilic ruthenium probe is located at the interface of polymer globular matrix even in a globular state, whereas pyrene probe was embedded into the hydrophobic matrix. The quenching behavior is discussed by a difference in molecular environment of the probes in phase transition of PNIPA in the aqueous solution.     

Adsorption of thorium(IV) from aqueous solutions by poly(cyclotriphosphazene-co-4,4′-diaminodiphenyl ether) microspheres

Journal of Radioanalytical and Nuclear Chemistry - Poly(cyclotriphosphazene-co-4,4′-diaminodiphenyl ether) microspheres (PZA) was based on hexachlorocyclotriphosphazene (HCCP) and...     

Liquid–liquid phase separation in aqueous solutions of poly(ethylene glycol) methacrylate homopolymers

Here, the liquid–liquid phase separation (LLPS) in aqueous solutions containing poly(ethylene glycol) (PEG) methacrylate homopolymers is reported for the first time. In this study, the thermoresponse of concentrated solutions of DEGMA₆₀ (two ethylene glycol, EG, groups) TEGMA₇₁ (three EG groups), OEGMA300_x (4.5 in average EG groups) of varying molar masses (MM), and OEGMA500₂₈ (nine in average EG groups) is discussed. Interestingly, the temperature of LLPS (T_LLPS) is controlled by the length of the PEG side chain, the MM of the OEGMA300_x and the polymer concentration. More specifically, the transition temperature decreases with: (i) Decrease in the length of the PEG side chain, (ii) increase in MM of the OEGMA300_x, and increase in concentration. In addition, LLPS is also observed in mixtures of OEGMA300_x with Pluronic® F127. In conclusion, these systems present a thermally induced LLPS, with the transition temperature being finely tuned to room temperature when DEGMA is used. These systems find potential use in numerous applications, varying from purification to “water-in-water” emulsions.     

Mechanocaloric properties of poly(dimethylsiloxane) and ethylene–propylene rubbers

We measured the temperature change in strips of poly(dimethylsiloxane) (PDMS) and ethylene–propylene rubbers that occurred as they were stretched and allowed to shrink by a factor of 3.5–4.5, along with the tensile force that effected the deformation. Main results obtained are as follows: (1) the temperature change is fully reversible in E–P rubber and slightly but definitely irreversible in PDMS rubber. The temperature rise in the latter on stretching is larger than the fall on shrinking by ca. 20 %. (2) The reversible part of heat that evolves from or is absorbed by PDMS rubber is smaller than, but close to, the mechanical energy expended. For E–P rubber, the heat generated greatly exceeds the expended mechanical energy. (3) The entropy of extension as a function of extension is reproduced well by Wang and Guth calculation for PDMS rubber, but not for E–P rubber.     

Speciation and complexation in aqueous Al(III)–quinolinate solutions: a spectroscopic study

Aqueous solutions containing quinolinic acid (2,3-pyridinedicarboxylic acid) and aluminum chloride were investigated using attenuated total reflection Fourier transform infrared spectroscopy, ²⁷Al nuclear magnetic resonance spectroscopy (²⁷Al NMR), and potentiometry. Conditional equilibrium constants were acquired at an apparent ionic strength of 1.33 M for the formation of quinolinic acid (H₂L), the HL⁻ species, and each of the Al(III)–quinolinate complexes (AlL⁺ and AlL₂ ⁻). The resolved infrared spectra of the quinolinate ion (L²⁻), the HL⁻ species, and quinolinic acid were assigned and interpreted with respect to the proton binding properties of the ligand. The assignments of the ²⁷Al NMR and infrared spectra of the Al(III)–quinolinate complexes provide evidence that quinolinate preferentially chelates to Al(III) through both the nitrogen of the pyridine ring and one of the oxygens of a carboxylate substituent.     

Nanocrystalline structure and soft magnetic properties of nickel–molybdenum alloy thin films electrodeposited from acidic and alkaline aqueous solutions

Nanocrystalline nickel–molybdenum (Ni–Mo) alloy thin films were electrochemically synthesized in acidic and alkaline aqueous solutions. Transmission electron microscope bright-field images and electron diffraction patterns of the electrodeposits made it obvious that pure Ni consists of a submicron crystalline phase with the grain diameter of several hundred nanometers, while Ni–20 %Mo alloy was composed of a nanocrystalline phase with the grain diameter of a few nanometers. It was estimated that the nanocrystalline phase of electrodeposited Ni–Mo alloy thin films was introduced by the formation of supersaturated Ni–Mo solid solution phase with Mo content in the deposit more than 20 %. Submicron crystalline pure Ni thin films were hardly magnetized in perpendicular direction to the film plane while the nanocrystalline Ni–20 %Mo alloy thin films were isotropically magnetized. It was suggested that the isotropical magnetization behavior was caused by decreasing the demagnetizing field and the magneto crystalline anisotropy with a decrease in the magnetic moment and the average crystal grain size. Coercive force of a submicron crystalline pure Ni thin film electrodeposited from an acidic aqueous solution was ca. 100 Oe while that of a nanocrystalline Ni–20 %Mo alloy thin film electrodeposited from an alkaline aqueous solution was only 1～2 Oe. Soft magnetic properties of Ni–Mo alloy thin films electrodeposited from an alkaline aqueous solution were better than that from an acidic aqueous solution and it was improved with an increase in Mo content in the deposit. It was estimated that the electrodeposited Ni–Mo alloy catalysts could be easily recovered with magnetic field less than 1 kOe.     

Sustained release drug delivery using supramolecular hydrogels of the triblock copolymer PCL–PEG–PCL and α-cyclodextrin

Supramolecular hydrogels (SMGel) have attracted much attention as a drug and gene delivery system in recent years. In this study, SMGels based on the tri-block copolymer of poly-ε-caprolactone–polyethylene glycol–poly-ε-caprolactone (PCL–PEG–PCL) and α-cyclodextrin (α-CD) were prepared and evaluated for the delivery of two model drugs, naltrexone hydrochloride and vitamin B₁₂. Tri-block copolymers were synthesized easily in 15 min by ring-opening polymerization using the microwave irradiation technique, and their structures were determined by gel permeation chromatography and nuclear magnetic resonance methods. SMGels composed of various concentrations of the copolymer and α-CD were prepared and characterized for their rheological behaviour, their gel formation time and in vitro drug release profile. The results indicated that copolymers with a PCL to PEG ratio of 1:4 are suitable for SMGel preparation. The most viscose system with good syringeability was prepared by mixing 12 % wt α-CD and 10 % wt of copolymer. The gelation was found to occur within a minute after mixing. The viscosity of the hydrogel systems was determined as a function of shear rate. Finally, in vitro B₁₂ release through the hydrogel systems was studied. Up to 80 % of Vitamin B₁₂ was released through this system during a period of 20 days. Rheological evaluation revealed that the hydrogel has shear thinning properties, and the system regained its ground rheological state in a time dependent manner. Polymer concentration did not affect the drug release profiles. Finally, it was concluded that such systems are appropriate drug delivery systems due to their ability to provide a controlled drug release profile and their shear thinning thixotropic behaviour, which makes them syringeable and injectable.     

Volume properties and structure of aqueous solutions of urea at 263–348 K

The apparent molar volume of urea ? in aqueous solution in the range T = 273–323 K and m = 1–10 (molality) depends linearly on m ^1/2. An equation for ?(m, T) was derived. The partial molar characteristics of urea ? ₂ and water ? ₁ (volume, dilatability, and temperature coefficients of volumes) were calculated. The ?(T) dependences have characteristic points (extrema, inflection points), shifted to the region of lower temperatures for dilute solutions. The ? ₁(T) dependences for 2m and 4m of the urea solution retain the characteristics of the Y ₁(T) of pure water. In these solutions, the proper structure of water is preserved.