Molecular design of efficient white‐light‐emitting fluorene‐based copolymers by mixing singlet and triplet emission

A new strategy to realize efficient white‐light emission from a binary fluorene‐based copolymer (PF‐Phq) with the fluorene segment as a blue emitter and the iridium complex, 9‐iridium(III)bis(2‐(2‐phenyl‐quinoline‐N,C³′)(11,13‐tetradecanedionate))‐3,6‐carbazole (Phq), as a red emitter has been proposed and demonstrated. The photo‐ and electroluminescence properties of the PF‐Phq copolymers were investigated. White‐light emission with two bands of blue and red was achieved from the binary copolymers. The efficiency increased with increasing concentration of iridium complex, which resulted from its efficient phosphorescence emission and the weak phosphorescent quenching due to its lower triplet energy level than that of polyfluorene. In comparison with the binary copolymer, the efficiency and color purity of the ternary copolymers (PF‐Phq‐BT) were improved by introducing fluorescent green benzothiadiazole (BT) unit into polyfluorene backbone. This was ascribed to the exciton confinement of the benzothiadiazole unit, which allowed efficient singlet energy transfer from fluorene segment to BT unit and avoided the triplet quenching resulted from the higher triplet energy levels of phosphorescent green emitters than that of polyfluorene. The phosphorescence quenching is a key factor in the design of white light‐emitting polyfluorene with triplet emitter. It is shown that using singlet green and triplet red emitters is an efficient approach to reduce and even avoid the phosphorescence quenching in the fluorene‐based copolymers. The strategy to incorporate singlet green emitter to polyfluorene backbone and to attach triplet red species to the side chain is promising for white polymer light‐emitting diodes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 453–463, 2008     

新型红光电磷光芴-alt-咔唑共聚物的合成与发光性能

通过Suzuki聚合反应合成了一系列以芴-alt-咔唑为主链, 铱配合物为侧链的深红色电磷光共轭聚合物. 发光器件结构为ITO/PEDOT∶PSS/PVK/Copolymer/Ba/Al, 基于共聚物PFCzIrNiq-1的器件在电流密度为9.4 mA/cm2时, 最大外量子效率为0.23%, 最大发射波长为680 nm.     

Saturated Red‐Emitting Electrophosphorescent Polymers with Iridium Coordinating to β‐Diketonate Units in the Main Chain

Summary: A series of novel copolymers with fluorene‐alt‐carbazole segments and β‐diketonate moieties coordinating to iridium were synthesized by Suzuki polycondensation, and characterized by ¹H NMR, ¹³C NMR, and GPC. In the absorption spectra of the copolymers, metal‐to‐ligand charge‐transfer transitions coming from iridium complex increased in intensity with increasing content of Ir complex in copolymers. The photoluminescence spectra of the copolymers were dominated by emission from the iridium complex with peak at ca. 620 nm even at the feed ratio of the complex as low as 0.5 mol‐%. The electrochemical investigation indicated that the incorporation of carbazole and iridium complex units reduce the barrier for both hole and electron injection compared with the polyfluorene. The light‐emitting diodes using the copolymers as emission layer under different device configurations were fabricated. The devices with 2‐(4‐biphenylyl)‐5‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazole (PBD) show significantly higher external quantum efficiencies than those without PBD. A saturated red‐emitting polymer light‐emitting diode with emission peak at 628 nm, the maximum external quantum efficiency of 0.6% at the current density (J) of 38.5 mA · cm⁻², and the maximum luminance of 541 cd · m⁻² at 15.8 V was achieved from the device ITO/PEDOT/PFCzIrpiq3 + PBD (40%)/Ba/Al.

Novel copolymers with fluorene‐alt‐carbazole segments and iridium coordinating to β‐diketonate in the main chain.     

Synthesis and properties of electrophosphorescent chelating polymers with iridium complexes in the conjugated backbone

The synthesis of electrophosphorescent chelating polymers by Suzuki polycondensation of A-A- and B-B-type monomers is described, in which the fluorene-alt-carbazole (PFCz) segment is used as polymer backbone. By using alkyl-substituted ligands of iridium complex monomers, chelating copolymers with higher contents of iridium complex can be synthesized. Chemical and photophysical characterization confirm that the Ir complex is incorporated into the polymer backbone as one of the monomer repeat units by means of two 5-bromotolylpyridine ligands. Chelating polymers with Ir complexes in the conjugated polymer backbone show highly efficient energy transfer of excitons from the PFCz host segment to the Ir complex by an intramolecular trapping mechanism. The external quantum and luminous efficiencies of a device made with PFCzMppyIrhm4 copolymer reach 4.1 % ph/el (photons/electron) and 5.4 cd A(-1), respectively, at a current density of 32.2 mA cm(-2), an emission peak of 577 nm, and a luminance of 1730 cd cm(-2). Most important, the devices made from the chelating copolymers show no notable efficiency decay with increasing current density due to reduced concentration quenching and triplet-triplet (T-T) annihilation. This indicates that incorporation of the phosphorescent complex into the rigid conjugated polymer main chain is a new way to simultaneously realize high efficiency, long-term stability, and simple processing of phosphorescent polymer light-emitting diodes.     

Iridium complex grafted to 3,6‐carbazole‐alt‐tetraphenylsilane copolymers for blue electrophosphorescence

We designed a 3,6‐dibromo‐9‐hexyl‐9H‐carbazole derivative with the blue emissive iridium complex bis[2‐(4,6‐difluorophenyl)pyridyl‐N,C^2′](picolinato)iridium(III) (FIrpic) linked at the alkyl terminal. Based on this monomer, novel 3,6‐carbazole‐alt‐tetraphenylsilane copolymers grafted with FIrpic were synthesized by palladium‐catalyzed Suzuki coupling reaction, and the content of FIrpic in the polymers could be controlled by feed ratio of the monomers. The polymer films mainly show blue emission from FIrpic, and the emission intensity from the polymer backbones is much weaker compared with the doped analogues, which demonstrates an efficient energy transfer from polymeric host to covalently bonded guest. The phase separation in the polymers was suppressed, which can be identified by atomic force microscopy and designed electroluminescent (EL) devices. EL devices based on the polymers exhibited blue phosphorescence from FIrpic. The luminous efficiency of preliminary devices reached 2.3 cd/A, and the efficiency roll‐off at high current densities was suppressed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1859–1865, 2010     

Synthesis, characterization and photophysics of fluorene-alt-oxadiazole copolymers containing pendent iridium (III) complex moiety

A series of fluorene-alt-oxadiazole copolymers containing a pendent phosphor chromophore of the (piq)₂Ir(pic) complex were synthesized via the palladium-catalyzed Suzuki coupling reaction, where piq is 1-phenylisoquinoline and pic is picolinic acid. These copolymers exhibited a similar absorption spectrum with a peak at about 330 nm and a typical emission peak at 408 nm in CH₂Cl₂ from the fluorene-alt-oxadiazole backbone. However, a significantly red-shifted emission peak at about 625 nm was observed in the neat films of these copolymers, which are attributed to the pendent iridium (III) complex unit. Using these copolymers as single emission layer, the polymer light-emitting devices with a configuration of ITO/PEDOT:PSS/copolymers/LiF/Al exhibited a saturated red emission with a peak at 632 nm. Significant influence of the attached iridium (III) complex ratio on EL performance was presented. A maximum current efficiency of 1.2 cd/A at 63 mA/cm² and a maximum luminance of 1125 cd/m² at 12 V were achieved from the device with the copolymer containing iridium (III) complex in a 3% molar ratio.     

pi-Conjugated chelating polymers with charged iridium complexes in the backbones: synthesis, characterization, energy transfer, and electrochemical properties

A series of pi-conjugated chelating polymers with charged iridium (Ir) complexes in the backbones were synthesized by a Suzuki polycondensation reaction, leading to homogeneous polymeric materials that phosphoresce red light. The fluorene and bipyridine (bpy) segments were used as polymer backbones. 5,5'-Dibromobipyridine served as a ligand to form a charged iridium complex monomer with 1-(9'9-dioctylfluorene-2-yl)isoquinoline (Fiq) as the cyclometalated ligand. Chemical and photophysical characterization confirmed that Ir complexes were incorporated into the backbones as one of the repeat units by means of the 5,5'-dibromobipyridine ligand. Chelating polymers showed almost complete energy transfer from the host fluorene segments to the guest Ir complexes in the solid state when the feed ratio was 2 mol %. In the films of the corresponding blend system, however, energy transfer was not complete even when the content of Ir complexes was as high as 16 mol %. Both intra- and intermolecular energy-transfer processes existed in this host-guest system, and the intramolecular energy transfer was a more efficient process. All chelating polymers displayed good thermal stability, redox reversibility, and film formation. These chelating polymers also showed more efficient energy transfer than the corresponding blended system and the mechanism of incorporation of the charged Ir complexes into the pi-conjugated polymer backbones efficiently avoided the intrinsic problems associated with the blend system, thus offering promise in optoelectronic applications.     

Nearly monochromatic red electroluminescence from a nonconjugated polymer containing carbazole segments and phenanthroline [Eu(β‐diketonate)3] moieties

A novel nonconjugated copolymer (PVKEu) with carbazole segments and phenanthroline [Eu(β‐diketonate)₃] moieties was synthesized via free radical copolymerization, and characterized by FTIR, ¹H NMR spectroscopy, GPC, ICP, and elemental analysis. The copolymer exhibited good solubility, as well as good thermal stability and high glass transition temperature. The photoluminescence (PL) of this polymer in solution and in solid film has been studied. A multi‐layer device with the configuration of ITO/PEDOT: PSS (40 nm)/PVKEu (70 nm)/BCP (15 nm)/AlQ₃ (30 nm)/LiF/Al exhibited nearly monochromatic red emission at 615 nm and voltage‐independent spectral stability. Our results suggest that enhancing the ligand‐mediated energy transfer between the matrix polymer and europium complex is a potential method to improve the electroluminescence performance of the Eu‐chelated polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 210–221, 2009     

Synthesis and light‐emitting properties of carbazole‐based copolymers bearing cyano‐substituted arylenevinylene chromophore

Two arylenevinylene compounds bearing the cyano group at α‐position ( 6 ) and β‐position ( 9 ) from the dialkoxylphenylene unit were synthesized, in which the molecular termini were functionalized with 3‐bromocarbazole. The Suzuki coupling copolymerization of these compounds with 1,4‐bis[(3′‐bromocarbazole‐9′‐yl)methylene]‐2,5‐didecyloxybenzene and 9,9‐dihexylfluorene‐2,7‐bis(boronic acid) was carried out to obtain copolymers ( cp67 and cp97 ) containing the cyano‐substituted arylenevinylene fluorophore of 7 mol %. Model compounds ( 6 ′ and 9 ′) corresponding to the arylenevinylene fluorophore were also prepared. The UV spectra of copolymers resembled that of homopolymer hp with no arylenevinylene segment in both CHCl₃ solution and thin film. The emission maxima of copolymers in CHCl₃ (394 nm) agreed with that of homopolymer indicating that the emission bands originated from the carbazole‐fluorene‐carbazole segment. The emission maximum wavelength of copolymer cp67 in thin film (477 nm) indicated fluorescence from the cyano‐substituted arylenevinylene fluorophore because of the occurrence of fluorescence resonance electron transfer. In contrast, copolymer cp97 showed fluorescence at 528 nm to suggest the formation of a new emissive species such as a charge‐transfer complex (exciplex). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 91–98, 2010     

以铱配合物为核、聚(芴-咔唑)为臂的白光星型磷光聚合物

设计合成了以苯基苯并咪唑和吡啶三唑为配体的高效的黄绿光铱配合物(M1),并通过Suzuki缩聚反应制备了以磷光铱配合物客体为中心核、蓝光荧光聚(芴-咔唑)主体为臂的星型磷光聚合物(P2.5、P5.0和P10),着重对M1和聚合物的发光性能、电化学性能及热稳定性能进行研究。 结果表明,M1具有较高的荧光量子效率(32.06%),其荧光寿命为1.09 μs,聚合物荧光寿命为2.223.93 μs,均表现为磷光;通过调节主客体的比例,利用主客体的部分能量转移机制,来实现聚合物的不同光色,发光颜色可从蓝光向黄光变化;当M1摩尔分数为2.5%时,获得的白光聚合物(P2.5)具有较好的发光性能和热稳定性能,色坐标为(0.30,0.32),位于白光区域,其最高占有轨道(HOMO)能级和最低未占有轨道(LUMO)能级分别为5.49和2.43 eV,荧光量子产率为14.3%,荧光寿命为2.22 μs。     

Copolymers Containing Phosphorescent Iridium(III) Complexes Obtained by Free and Controlled Radical Polymerization Techniques

A methacrylate‐functionalized phosphorescent Ir(III)‐complex has been synthesized, characterized, and applied as a monomer in radical copolymerizations. Together with methyl methacrylate, the complex has been copolymerized under free radical polymerization conditions. Aiming for host‐guest‐systems, applicable e.g. in organic light emitting devices (OLEDs), the complex was further copolymerized with a methacrylate‐functionalized carbazole derivative using the atom transfer radical polymerization technique. Applying gel permeation chromatography, in combination with a photodiode array detector, could clearly prove the formation of the copolymers. The optical properties of the photoactive monomers as well as the copolymers were investigated by absorption and emission spectroscopy (in solution). For the carbazole‐copolymer, the emission originates almost exclusively from the complex. This provides evidence of an efficient intrachain energy transfer, which makes the system an interesting candidate for potential OLED applications.

     

PL and EL behavior of near‐red luminescent metallopolymer easily prepared from phosphine‐containing copolymer and chloro{bis(1‐phenylisoquinolinato‐N,C2′)}iridium(III), and its monomeric analog

We successfully developed phosphorescent cyclometallated iridium‐containing metallopolymers, which are near‐red luminescent iridium complexes bearing phosphine‐containing copolymers used as polymer ligands, and investigated their photoluminescence and electroluminescence behavior. The phosphine copolymer ligand made from methyl methacrylate and 4‐styryldiphenylphosphine can be used as an anchor, which coordinates luminescent iridium units to form the metallopolymer easily. Organic light‐emitting diodes were fabricated from the metallopolymer and its nonpolymer analog, [IrCl(piq)₂PPh₃]. These complexes exhibited quite similar luminescence behavior, except for emission from the free‐phosphine‐units in the polymer side chain and their energy‐transferring properties from host to guest materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4366–4378, 2009     

Novel Red Electroluminescent Polymers Derived from Carbazole and 3,6‐Bis(2‐thienyl)‐1,2,7‐benzothiadiazole

A series of novel carbazole‐based soluble copolymers of different composition was synthesized by Suzuki coupling reaction. Efficient energy transfer from the wide‐band‐gap segment polycarbazole due to exciton trapping on narrow‐band‐gap benzothiadiazole sites has been observed. Maximum electroluminescence wavelengths of the copolymers varied between 668 nm and 716 nm, and the external quantum efficiency for copolymer devices is 0.3% for copolymers with 20% benzothiadiazole content.     

Novel orange-red light-emitting polymers with cyclometaled iridium complex grafted in alkyl chain

Novel poly(fluorene-alt-carbazole) (PFCz) based copolymers with 3,6-carbazole-N-alkyl grafted iridium complex using 2,3-diphenylpyrazine as ligand (IrBpz) were synthesized by Suzuki polycondensation. The emission of host polymer, PFCz, was completely quenched when the copolymer with 1 mol% of iridium complex. An orange-red emission with CIE coordinate of (0.56, 0.42) was observed from Phosphorescent polymer light-emitting diodes (PhPLEDs). The PhPLEDs made by this copolymer-iridium complex showed a maximum luminous efficiency (LE) of 5.58 cd/A and a maximal luminance of 8625 cd/m². White light with CIE coordinate of (0.33, 0.27) was observed from white PhPLEDs (WPhPLEDs) made by the copolymer containing 0.4 mol% iridium complex. A LE of 2.30 cd/A with luminance of 2068 cd/m² was observed from WPhPLEDs.     

MOLECULAR DESIGN OF LIGHT EMITTING POLYMERS

Fluorene-based alternating and statistical copolymers were synthesized by employing reaction methods of Wittig,Heck and Suzuki. The copolymers were classified into three groups with the photoluminescence (PL) emission maxima at420, 475 and 500 nm, respectively. Statistical copolymers with two chromophores having PL emission maxima at 420 and475 nm emitted light with the emission maximum at 475 nm on photoexcitation at 365 nm and improved the quantumefficiency by the energy transfer. However, the intramolecular energy transfer was inefficient compared to the intermolecularenergy transfer when the two chromophores were apart from each other in the range of the Forster critical distance. Fluorene-pyridinedivinylene alternating copolymer was synthesized by the Wittig reaction and found to have physical, electronic andelectrochemical properties of the individual units intact. The double-layered light emitting diode (LED) with the statisticalcopolymer as an emitting layer and the pyridine-containing copolymer as an electron transporting-hole blocking layer, whichwere sandwiched between ITO and Al, displayed a quantum efficiency of 0.1%.     

Electroluminescent Properties of LECs Based on Ionic Transition Metal Complexes Using Tetrazole-Based Ancillary Ligand

Light-emitting electrochemical cells (LECs) are a promising type of electroluminescent device for display and lighting applications. In this study, LECs based on ionic iridium complexes utilizing a tetrazole based ancillary ligand were fabricated and their electrical properties were investigated. Two new iridium(III) complexes with tetrazole based ancillary ligands, namely, [Ir(ppy)₂(tetrazole)]PF₆ (complex 1) and [Ir(dfppy)₂(tetrazole)]PF₆ (complex 2) (where ppy is 2-phenylpyridine, dfppy is 2-(2,4-difluorophenyl)pyridine, tetrazole is 5-bromo-2-(2-methyl-2H-tetrazol-5-yl)-pyridine and PF₆ is hexafluorophosphate), have been synthesized and characterized. These synthesized complexes were used for the fabrication of LEC devices. LECs based on complex 1 result in orange light emission (576 nm) with the Commission Internationale de l’Eclairage (CIE) coordinates of (0.45, 0.49), while complex 2 emits green (518 nm) electroluminescence with the CIE coordinates of (0.33, 0.49). Our work suggests that the light emission of cationic iridium complexes can easily be tuned by the substituents on the cyclometalated ligands.     

Triplet energy back transfer in conjugated polymers with pendant phosphorescent iridium complexes

The nature of Dexter triplet energy transfer between bonded systems of a red phosphorescent iridium complex 13 and a conjugated polymer, polyfluorene, has been investigated in electrophosphorescent organic light-emitting diodes. Red-emitting phosphorescent iridium complexes based on the [Ir(btp)(2)(acac)] fragment (where btp is 2-(2'-benzo[b]thienyl)pyridinato and acac is acetylacetonate) have been attached either directly (spacerless) or through a -(CH(2))(8)- chain (octamethylene-tethered) at the 9-position of a 9-octylfluorene host. The resulting dibromo-functionalized spacerless (8) or octamethylene-tethered (12) fluorene monomers were chain extended by Suzuki polycondensations using the bis(boronate)-terminated fluorene macromonomers 16 in the presence of end-capping chlorobenzene solvent to produce the statistical spacerless (17) and octamethylene-tethered (18) copolymers containing an even dispersion of the pendant phosphorescent fragments. The spacerless monomer 12 adopts a face-to-face conformation with a separation of only 3.6 A between the iridium complex and fluorenyl group, as shown by X-ray analysis of a single crystal, and this facilitates intramolecular triplet energy transfer in the spacerless copolymers 17. The photo- and electroluminescence efficiencies of the octamethylene-tethered copolymers 18 are double those of the spacerless copolymers 17, and this is consistent with suppression of the back transfer of triplets from the red phosphorescent iridium complex to the polyfluorene backbone in 18. The incorporation of a -(CH(2))(8)- chain between the polymer host and phosphorescent guest is thus an important design principle for achieving higher efficiencies in those electrophosphorescent organic light-emitting diodes for which the triplet energy levels of the host and guest are similar.     

Phosphorescent organic light‐emitting diodes using an iridium complex polymer as the solution‐processible host material

We prepared an iridium polymer complex having 2‐phenylpyridine as a η²‐cyclometallated ligand, a new OLED containing a solution‐processible iridium polymer as a host, and a phosphorescent iridium complex, [Ir(piq‐^tBu)₃] as a guest. This is the first example to apply a phosphorescent iridium complex polymer to a host material in a phosphorescent OLED. A phosphine copolymer ligand made from methyl methacrylate (MMA) and 4‐styryldiphenylphosphine can be used as an anchor polymer, which coordinates to luminescent iridium units to form a host metallopolymer easily. The OLED containing the host iridium‐complex polymer film, in which the guest, 2 wt % Ir(piq‐^tBu)₃, was doped, showed red electroluminescence as a result of efficient energy transfer from the iridium polymer host to the iridium guest. The maximum current efficiency of the device was 1.00, suggesting that a soluble iridium complex polymer can be used as a solution‐processible polymer host in EL devices. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4358–4365, 2009     

2,5-二[5-(对癸氧基苯基)-1,3,4-噁二唑]乙烯基苯与乙烯基咔唑共聚物的合成与表征

通过自由基聚合反应得到了2,5-二[5-(对癸氧基)苯基)-1,3,4-噁二唑]乙烯基苯和乙烯基咔唑的无规共聚物.研究了共聚物组成与热性能关系;实验结果表明,随着乙烯基咔唑量的增加,共聚物的荧光量子产率会下降;共聚物与相应的均聚物相似,它们具有相似的光致发光波长.     

含三芳胺基的吡啶甲酸衍生物及其环金属铱配合物的合成与性能

通过Ullmann反应和Negishi偶联反应, 合成了一种含三芳胺功能基的吡啶-2-甲酸衍生物; 并以此为辅助配体、1-苯基异喹啉为环金属配体, 设计合成了一种新型环金属铱配合物. 该配合物的二氯甲烷溶液, 在391～461 nm范围呈现了强烈的金属-配体电荷转移(MLCT)电子跃迁吸收带; 其最大发光波长为609 nm. 与传统的二(1-苯基异喹啉)(吡啶-2-甲酸)合铱配合物相比, 设计的环金属铱配合物具有增强的MLCT电子跃迁吸收和低的氧化电位, 是一种有发展潜力的红色磷光材料.