纳米SiO2/含氟丙烯酸酯共聚物复合乳液的制备与性能及聚合动力学研究

采用原位聚合法制备纳米SiO2/含氟丙烯酸酯共聚物复合乳液,研究了其聚合反应动力学,并通过红外光谱(IR)、透射电子显微镜(TEM)、热失重(TGA)等方法表征所得产物的结构及形态、乳胶膜的耐热性能和表面性能.研究结果显示,聚合反应的表观活化能为83.15 kJ/mol,纳米SiO2/含氟丙烯酸酯共聚物复合粒子呈现出明显的核壳结构,纳米SiO2粒子的引入不仅改善了聚合物的耐热性能,也在一定程度上提高了乳胶膜的抗水性.对膜表面自由能的组成分析表明,与一般含氟乳胶膜的表面自由能的情况相反,该乳胶膜的表面能是由较大的极性部分和较小的色散部分组成.     

A catalyst system for the formation of amides by reaction of carboxylic acids with blocked isocyanates

A catalyst for the reaction of blocked isocyanates (blocking agent diisopropylamine and dimethyl pyrazole) and carboxylic acids was identified. Magnesium and in some instances calcium salts proved to be highly active as catalyst. This reaction gives amides in quantitative yield and excellent selectivity and is suitable for coating and general chemical purposes.     

A catalyst system for the reaction of carboxylic acids with aliphatic isocyanates

Catalysts have been found for the selective reaction of aliphatic isocyanates with carboxylic acids giving amides after carbon dioxide extrusion. Magnesium and calcium salts lead to a dramatic increase in reaction rates while improving the selectivity when sterically hindered isocyanates and/or carboxylic acids are used.     

Studies on the reaction of 3-substituted-4-hydroxy-2H-1,2-benzothiazine 1,1-dioxides with aryl isocyanates and the synthesis of corresponding derivatives

The reaction of 3-substituted-4-hydroxy-2H-1,2-benzothiazine 1,1-dioxides with aryl isocyanate under different equivalents of strong base NaH was studied.Seventeen of new derivatives were obtained whose structures were characterized by 1H NMR,IR,MS,elementary analysis and FeCl3 test.     

Kinetics and thermodynamics of the reaction of deoxyhemerythrin with nitric oxide

Deoxyhemerythrin reacts with NO to form a 1:1 adduct shown spectrophotometrically. The kinetics of the formation have been studied directly by stopped-flow measurements at four different temperatures (0.0-23.6 degrees C). The kinetics of the dissociation have been studied, also by stopped-flow techniques, at five different temperatures (4.0-35.1 degrees C) using three different scavengers [Fe(II)(edta)2-, O2 and sperm whale deoxymyoglobin], which gave similar values. For the formation kf = (4.2 +/- 0.2) x 10(6) M-1 s-1, delta Hf not equal = 44.3 +/- 2.3 kJ mol-1, delta Sf not equal to = 30 +/- 8 J mol-1 K-1 and for the dissociation kd = 0.84 +/- 0.02 s-1, delta Hd not equal to 95.6 +/- 2.1 kJ mol-1 delta Sd not equal to = 74 +/- 7 J mol-1 K-1 (25 degrees C, I = 0.2 M and pH 7-8.1). From the kinetic data the thermodynamic data for the formation of HrNO were calculated: Kf = (5.0 +/- 0.3) x 10(6) M-1, delta H = -51.3 +/- 3.1 kJ mol-1 and delta S = -44 +/- 11 J mol-1 K-1 (25 degrees C). The kinetic data suggest that NO occupies the same iron(II) site in deoxyhemerythrin as oxygen does. The equilibrium constant for the formation of Fe(II)(edta)(NO)2- has been redetermined: K1 = (1.45 +/- 0.07) x 10(7) M-1, delta H = -77.5 +/- 1.5 kJ and mol-1 and delta S = -123.5 J mol-1 K-1 (25 degrees C).     

铂单晶电极表面不可逆反应动力学I.Pt(100)单晶电极上甲酸氧化的现场红外反射光谱研究

运用电化学暂态方法和现场时间分辨ＦＴＩＲ反射光谱研究甲酸在Ｐｔ（１００）单晶电极上的解离吸附和氧化过程,深入认识了甲酸解离吸附的反应速率在－０．２５至０．２５Ｖ电位区间呈火山形变化的规律。根据电化学现场时间分辨红外光谱的研究结果,提出在研究反动力学时避免甲酸解离吸附干扰的方法,为进一步研究甲酸在Ｐｔ（１００）电极表面经活性中间体直接氧化至ＣＯ２的反应动力学奠定了基础。     

Structure-reactivity correlations in the reaction of ethyl bromoacetate with aliphatic carboxylate ions

The second-order rate constants at three different temperatures have been determined for nucleophilic substitution reactions of ethyl bromoacetate with various substituted aliphatic carboxylate ions (XCH₂COO⁻) in 90% acetone-10% water (v/v) mixture and the activation parameters have been evaluated. The rate data have been analysed in terms of electronic and steric effects by using various single and multi-parameterequations. Analysis of the results shows that localized and steric effects are more important than the delocalized effect. The regression coefficient of the inductive component is negative indicating that inductively electron-releasing substituents accelerate the reaction and electron-withdrawing substituents retard it. The steric component corresponds to the reaction being subject to steric acceleration by the substituents. The per cent steric effect has been calculated. The Br?nsted type correlation is fair, and theβ _N value has been determined.     

Kinetics of the solvolysis of chloropentacyanocobaltate(III) ions in water + 2-propanol mixtures

Rates of solvolysis of [Co(CN) ₅ Cl] ^3– have been determined in a range of water-rich water + 2-propanol mixtures over a range of temperatures and they show no simple correlation with dielectric constant. The variation of the enthalpy and entropy of activation with solvent composition show broad extrema and these are discussed in relation to the physical properties of the media. The application of a free energy cycle to the dissociative loss of the chloride ion in the transition state shows that the effect of changes in solvent structure as the alcohol content increases is to stabilize the emergent pentacyanocobaltate(III) ion Co(CN) ₅ ^2– relative to the chloropentacyanocobaltate(III) anion in the initial state.     

Kinetics and thermodynamics of synthesis of palm oil-based trimethylolpropane triester using microwave irradiation

Enhancement of reaction performance utilizing microwave irradiation has drawn so much interest due to its shorter reaction time and low catalyst loading. These advantages are particularly significant from kinetics and thermodynamics perspectives. This study aimed to investigate the kinetics and thermodynamics of microwave-assisted transesterification of palm oil-based methyl ester into biolubricant. The transesterification reaction of palm oil methyl ester (PME) and trimethylolpropane (TMP) was conducted at 110–130 °C for 90 min under vacuum condition. Sodium methoxide was employed as the catalyst at 0.6 wt% of reactants fixed at molar ratio of 4:1 (PME: TMP). The experimental data were fitted with the second-order reversible reaction kinetics mechanisms. The data were solved via Runge-Kutta 4,5 order using MATLAB software. Analysis on the data revealed that the reaction rate constants at temperatures of 110–140 ℃ were in the range of 0.01–0.63 [(w/w)(min)]⁻¹, with standard errors of 0.0026–0.0228 within 99.99% prediction interval. Microwave-assisted reaction obtained 17.0 kcal/mol of activation energy. This method reduced activation energy by 49% as compared to the conventional heating. Activation energy and time-periodic energy assessment showed that the reaction was endothermic. The reaction at 130 °C is the easiest to activate. The positive Gibbs free energy (ΔG > 0) found using Eyring-Polanyi equation indicated that the transesterification was non-spontaneous and endergonic.     

Theoretical study on the solvent effect of the nitrosyl cation (NO+) generating reaction

Nitrosyl cation (NO⁺) generating reaction HONO + H⁺ → NO⁺ + H₂O has been theoretically investigated by B3LYP and high‐electron‐correlation QCISD methods with 6‐31G (d,p) basis set. The solvent effects on the geometries, reaction path properties, energies, thermodynamic, and kinetic characters in four solvents (benzene, tetrahydrofuran, acetonitrile, and water) have been calculated using self‐consistent reaction field (SCRF) approach with the polarizable continuum model (PCM). The results show that the activation energy barriers and the relative energies of the products are decreased with increase of the polarities of the solvents, and the reaction is favored in polar solvents thermodynamically and kinetically. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Kinetics and thermodynamics of rebaudioside A adsorption on a strongly acidic cation exchange resin

To explain the mechanism underlying the adsorption of stevia's polar component rebaudioside A in hydrophilic interaction liquid chromatography mode, the characteristics of rebaudioside A adsorption on various resins in an organic‐solvent‐rich system were studied. Among the tested resins, the strongly acidic cation resin FPC11 showed the best adsorption behavior for rebaudioside A. The factors affecting the adsorption kinetics of the resin for rebaudioside A are discussed. The results showed that the pseudo‐second‐order reaction model and intra‐particle diffusion model best described the adsorption kinetics of rebaudioside A on the resin. The adsorption rate was controlled by physical sorption, mainly via electron sharing or electron transfer between the adsorbent and the adsorbate. The adsorption process with multiple stages involved weak initial adsorption behavior. Thermodynamic studies showed that the adsorption of rebaudioside A on the resin was not an ideal monolayer adsorption, but mutual adsorption effects between the adsorbates. The adsorption was a spontaneous, entropy‐increasing endothermic process. The synergistic effect of hydrogen bonding and ion–dipole was a possible driving force.     

Kinetics and thermodynamics of the attack of a phosphate ore by acid solutions at different temperatures

A calorimetric study of the kinetics and thermodynamics of the attack of a phosphate ore from Gafsa region (Tunisia) by phosphoric acid and by a mixture of phosphoric acid and sulfuric acids is undertaken at different temperatures. Two samples of the same ore having different grain size have been used. At 25 °C, the dissolution enthalpy in phosphoric acid solution equals −233.6 ± 2.2 J/g for both of the samples. Attack by the mixture of acids is strongly dependent on the solid granulometry. Interpretation of the calorimetric results by Avrami model shows the existence of three domains attributed to phosphate ore dissolution/H₂PO₄⁻ neutralisation, hemihydrate (HH) precipitation and hemihydrate/dihydrate (DH) transformation. The attack by the acid mixture was performed at higher temperatures and showed in addition the transitional formation of the anhydrous sulfate (AH) at T ≥ 55 °C, which transforms into dihydrate after the HH/DH transformation.     

Ferric Acetylacetonate Catalyst on the Urethane Reaction of Phenyl Isocyanate and 1,2-Propyleneglycol: A Study of Kinetics,Thermodynamics, and Mechanism with In Situ FT-IR Spectroscopy

The urethane reaction of phenyl isocyanate and 1,2-propylene glycol was investigated with ferric acetylacetonate (Fe(acac)₃) as catalyst. The effect of the catalytic properties of Fe(acac)₃ on the formation of the urethane bond was evaluated with in situ FT-IR. The influence of the Fe(acac)₃ concentration as well as the reaction temperature is discussed. It was observed that there was a turning point in the reaction rate when the temperature decreases, which remained unchanged with variation in Fe(acac)₃ concentration. Arrhenius and Eyring parameters of the primary hydroxyl group were determined for the catalyzed reaction. The low-temperature and high-temperature values are surprisingly different. A reasonable reaction mechanism is proposed and the possible active species are discussed, followed by a kinetics and thermodynamics discussion.     

Real‐Time Probing of Nanowire Assembly Kinetics at the Air–Water Interface by In Situ Synchrotron X‐Ray Scattering

Although many assembly strategies have been used to successfully construct well‐aligned nanowire (NW) assemblies, the understanding of their assembly kinetics has remained elusive, which restricts the development of NW‐based device and circuit fabrication. Now a versatile strategy that combines interfacial assembly and synchrotron‐based grazing‐incidence small‐angle X‐ray scattering (GISAXS) is presented to track the assembly evolution of the NWs in real time. During the interface assembly process, the randomly dispersed NWs gradually aggregate to form small ordered NW‐blocks and finally are constructed into well‐defined NW monolayer driven by the conformation entropy. The NW assembly mechanism can be well revealed by the thermodynamic analysis and large‐scale molecular dynamics theoretical evaluation. These findings point to new opportunities for understanding NW assembly kinetics and manipulating NW assembled structures by bottom‐up strategy.     

CAN作用下脂肪族含氮化合物的游离基反应研究

使用硝酸高铈铵(CAN)作为氧化剂, 对不同类型的脂肪族含氮化合物的氧化游离基反应进行调查, 对于不同类型的含氮化合物, 得到不同的结果。     

Kinetics and correlation analysis of reactivity in the oxidation of aliphatic primary alcohols by isoquinolinium dichromate in non-aqueous medium

Mild oxidation in dimethyl sulfoxide (DMSO) medium by isoquinolinium dichromate (IQDC) of aliphatic primary alcohols produces corresponding carbonyl compounds. A Michaelis-Menten kind kinetics noticed as for alcohols while unit dependency on rate observed as for IQDC. At non-identical temperatures the formation constants and the rates of decomposition of alcohol-IQDC complexes have been evaluated. Thermodynamic parameters and activation parameters for formation of the complex and break down of the complexes have been determined respectively. The oxidation process accelerates with increase in proton concentration. An α-C-H bond fisson in the rate-controlling step suggested by the deuterium isotope effect. For oxidation of ethanol, k_H/k_D = 5.82 at 293 K, was observed. The oxidation rates have been evaluated in 19 organic solvents and greater role of solvating power of the cation is observed. Depended on the kinetic parameters, solvent effect analysis and the outcome of thermodynamic parameters, a mechanism in which rate-controlling break down of the complex is suggested, to give the resulting product through hydride-ion transfer with a cyclic transition state.     

A theoretical study of the ion pair SN2 reaction between lithium isocyanates with methyl fluoride with inversion and retention mechanism

This paper is devoted to a detailed theoretical study of an ion pair S_N2 reaction LiNCO+CH₃F in the gas phase and in solution at the level of MP2(full)/6-31+G**//HF/6-31+G**. Two possible reaction mechanisms, inversion and retention, are discussed. There are eight possible reaction pathways. The inversion mechanism is more favorable no matter in the gas phase or in solution based on analyses of the transition structures. Methyl isocyanate should form preferentially in the gas phase and more stable methyl cyanate is the main product in solution. The retardation of the reaction in solvents was attributed to the difference in solvation in the separated reactants and in the transition state.     

Kinetics, thermodynamic and chromatographic behaviour of the uranyl ions sorption from aqueous thiocyanate media onto polyurethane foams

The retention profile of uranyl ions from aqueous thiocyanate media by polyether-type based polyurethane foams (PUFs) has been studied to gain more information regarding the mechanism of extraction. The effect of pH, shaking time, surfactant type, extraction media, temperature and analyte concentration on the retention of uranyl ions onto PUFs has been studied. It has been found that, the sorption of uranyl ions involved in the formation of a ternary complex ion associate of uranyl ion, thiocyanate and PUFs is highly dependent on these parameters. The kinetics and thermodynamics of the uranyl ions sorption have been studied in more detail. The dependency of the extraction on the parameters can be explained via a “solvent extraction,” mechanism. However, owing to the complex nature of the PUFs a dual-mode sorption mechanism involving both absorptions related to “solvent extraction” and an added component for “surface adsorption” may be operated simultaneously. Attempts for quantitative retention and recovery of the uranyl ions in tap and industrial waste water samples by the proposed PUFs columns has been carried out and satisfactory results have been obtained. The cellular structure of the PUF sorbent offer unique advantages over a conventional bulk type sorbents in rapid, versatile effective separation and/or preconcentration of uranyl ions.