3D-QSAR and docking studies of estrogen compounds based on estrogen receptor β

Close attention has been paid to estrogen compounds because these chemicals may pose a serious threat to the health of humans and wildlife. Estrogen receptor (ER) exists as two subtypes, ERα and ERβ. The difference in amino acids sequence of the binding sites of ERα and ERβ might lead to a result that some synthetic estrogens and naturally occurring steroidal ligands have different relative affinities and binding modes for ERα and ERβ. In this investigation, comparative molecular similarity indices analysis...     

Strategies to design pyrazolyl urea derivatives for p38 kinase inhibition: a molecular modeling study

The p38 protein kinase is a serine–threonine mitogen activated protein kinase, which plays an important role in inflammation and arthritis. A combined study of 3D-QSAR and molecular docking has been undertaken to explore the structural insights of pyrazolyl urea p38 kinase inhibitors. The 3D-QSAR studies involved comparative molecular field analysis (CoMFA) and comparative molecular similarity indices (CoMSIA). The best CoMFA model was derived from the atom fit alignment with a cross-validated r ² (q ²) value of 0.516 and conventional r ² of 0.950, while the best CoMSIA model yielded a q ² of 0.455 and r ² of 0.979 (39 molecules in training set, 9 molecules in test set). The CoMFA and CoMSIA contour maps generated from these models provided inklings about the influence of interactive molecular fields in the space on the activity. GOLD, Sybyl (FlexX) and AutoDock docking protocols were exercised to explore the protein–inhibitor interactions. The integration of 3D-QSAR and molecular docking has proffered essential structural features of pyrazolyl urea inhibitors and also strategies to design new potent analogues with enhanced activity.     

Molecular docking and 3D-quantitative structure activity relationship analyses of peptidyl vinyl sulfones: <Emphasis Type="Italic">Plasmodium Falciparum</Emphasis> cysteine proteases inhibitors

Comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) based on three-dimensional quantitative structure–activity relationship (3D-QSAR) studies were conducted on a series (39 molecules) of peptidyl vinyl sulfone derivatives as potential Plasmodium Falciparum cysteine proteases inhibitors. Two different methods of alignment were employed: (i) a receptor-docked alignment derived from the structure-based docking algorithm GOLD and (ii) a ligand-based alignment using the structure of one of the ligands derived from a crystal structure from the PDB databank. The best predictions were obtained for the receptor-docked alignment with a CoMFA standard model (q ² = 0.696 and r ² = 0.980) and with CoMSIA combined electrostatic, and hydrophobic fields (q ² = 0.711 and r ² = 0.992). Both models were validated by a test set of nine compounds and gave satisfactory predictive r ² _pred values of 0.76 and 0.74, respectively. CoMFA and CoMSIA contour maps were used to identify critical regions where any change in the steric, electrostatic, and hydrophobic fields may affect the inhibitory activity, and to highlight the key structural features required for biological activity. Moreover, the results obtained from 3D-QSAR analyses were superimposed on the Plasmodium Falciparum cysteine proteases active site and the main interactions were studied. The present work provides extremely useful guidelines for future structural modifications of this class of compounds towards the development of superior antimalarials.     

Analysis of Ah receptor binding affinities of polybrominated diphenyl ethers via in silico molecular docking and 3D-QSAR

Polybrominated diphenyl ethers (PBDEs) have become ubiquitous contaminations due to their use as flame retardants. The structural similarity of PBDE to some dioxin-like compounds suggested that they may share similar toxicological effects: they might activate the aryl hydrocarbon receptor (AhR) signal transduction pathway and thus might have adverse effects on wildlife and humans. In this study, in silico computational workflow combining molecular docking and three-dimensional quantitative structure–activity relationship (3D-QSAR) was performed to investigate the binding interactions between PBDEs and AhR and the structural features affecting the AhR binding affinity of PBDE. The molecular docking showed that hydrogen-bond and hydrophobic interactions were the major driving forces for the binding of ligands to AhR, and several key amino acid residues were also identified. The CoMSIA model was developed from the conformations obtained from molecular docking and exhibited satisfactory results as q ² of 0.605 and r ² of 0.996. Furthermore, the derived model had good robustness and statistical significance in both internal and external validations. The 3D contour maps generated from CoMSIA provided important structural features influence the binding affinity. The obtained results were beneficial to better understand the toxicological mechanism of PBDEs.     

Docking-based CoMFA and CoMSIA study of azaindole carboxylic acid derivatives as promising HIV-1 integrase inhibitors

Three-dimensional quantitative structure–activity relationship (3D-QSAR) studies were performed based on a series of azaindole carboxylic acid derivatives that had previously been reported as promising HIV-1 integrase inhibitors. Docking studies to explore the binding mode were performed based on the highly active molecule 36. The best docked conformation of molecule 36 was used as template for alignment. The comparative molecular field analysis (CoMFA) model (including steric and electrostatic fields) yielded the cross validation q ² = 0.655, non-cross validation r ² = 0.989 and predictive r ² _pred = 0.979. The best comparative molecular similarity indices analysis (CoMSIA) model (including steric, electrostatic, hydrophobic and hydrogen-bond acceptor fields) yielded the cross validation q ² = 0.719, non-cross validation r ² = 0.992 and predictive r ² _pred = 0.953. A series of new azaindole carboxylic acid derivatives were designed and the HIV-1 integrase inhibitory activities of these designed compounds were predicted based on the CoMFA and CoMSIA models.     

Insight into the structural requirements of benzimidazole derivatives as interleukin‐2 inducible t‐cell kinase inhibitors by computational explorations

In the present work, a set of ligand‐ and receptor‐based 3D‐QSAR models were developed to explore the structure–activity relationship of 109 benzimidazole‐based interleukin‐2‐inducible T‐cell kinase (ITK) inhibitors. In order to reveal the requisite 3D structural features impacting the biological activities, a variety of in silico modeling approaches including the comparative molecular field analysis (CoMFA), comparative molecular similarity indices analysis (CoMSIA), docking, and molecular dynamics were applied. The results showed that the ligand‐based CoMFA model (Q² = 0.552, R²_ncv = 0.908, R²_pred = 0.787, SEE = 0.252, SEP = 0.558) and CoMSIA model (Q² = 0.579, R²_ncv = 0.914, R²_pred = 0.893, SEE = 0.240, SEP = 0.538) were superior to other models with greater predictive power. In addition, a combined analysis between the 3D contour maps and docking results showed that: (1) Compounds with bulky or hydrophobic substituents near ring D and electropositive or hydrogen acceptor groups around rings C and D could increase the activity. (2) The key amino acids impacting the receptor–ligand interactions in the binding pocket are Met438, Asp500, Lys391, and Glu439. The results obtained from this work may provide helpful guidelines in design of novel benzimidazole analogs as inhibitors of ITK. © 2013 Wiley Periodicals, Inc.     

Receptor-based 3D QSAR analysis of estrogen receptor ligands – merging the accuracy of receptor-based alignments with the computational efficiency of ligand-based methods

One of the major challenges in computational approaches to drug design is the accurate prediction of binding affinity of biomolecules. In the present study several prediction methods for a published set of estrogen receptor ligands are investigated and compared. The binding modes of 30 ligands were determined using the docking program AutoDock and were compared with available X-ray structures of estrogen receptor-ligand complexes. On the basis of the docking results an interaction energy-based model, which uses the information of the whole ligand-receptor complex, was generated. Several parameters were modified in order to analyze their influence onto the correlation between binding affinities and calculated ligand-receptor interaction energies. The highest correlation coefficient (r ² = 0.617, q ² _LOO = 0.570) was obtained considering protein flexibility during the interaction energy evaluation. The second prediction method uses a combination of receptor-based and 3D quantitative structure-activity relationships (3D QSAR) methods. The ligand alignment obtained from the docking simulations was taken as basis for a comparative field analysis applying the GRID/GOLPE program. Using the interaction field derived with a water probe and applying the smart region definition (SRD) variable selection, a significant and robust model was obtained (r ² = 0.991, q ² _LOO = 0.921). The predictive ability of the established model was further evaluated by using a test set of six additional compounds. The comparison with the generated interaction energy-based model and with a traditional CoMFA model obtained using a ligand-based alignment (r ² = 0.951, q ² _LOO = 0.796) indicates that the combination of receptor-based and 3D QSAR methods is able to improve the quality of the underlying model.     

QM/MM based 3D QSAR models for potent B-Raf inhibitors

Three dimensional (3D) quantitative structure-activity relationship studies of 37 B-Raf inhibitors, pyrazole-based derivatives, were performed. Based on the co-crystallized compound (PDB ID: 3D4Q), several alignment methods were utilized to derive reliable comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) models. Receptor-guided alignment with quantum mechanics/molecular mechanics (QM/MM) minimization led to the best CoMFA model (q ² = 0.624, r ² = 0.959). With the same alignment, a statistically reliable CoMSIA model with steric, H-bond acceptor, and hydrophobic fields was also derived (q ² = 0.590, r ² = 0.922). Both models were validated with an external test set, which gave satisfactory predictive r ² values of 0.926 and 0.878, respectively. Contour maps from CoMFA and CoMSIA models revealed important structural features responsible for increasing biological activity within the active site and explained the correlation between biological activity and receptor-ligand interactions. New fragments were identified as building blocks which can replace R1-3 groups through combinatorial screening methods. By combining these fragments a compound with a high bioactivity level prediction was found. These results can offer useful information for the design of new B-Raf inhibitors.     

3D-QSAR and molecular docking study of LRRK2 kinase inhibitors by CoMFA and CoMSIA methods

Three-dimensional quantitative structure–activity relationship (3D-QSAR) modelling was conducted on a series of leucine-rich repeat kinase 2 (LRRK2) antagonists using CoMFA and CoMSIA methods. The data set, which consisted of 37 molecules, was divided into training and test subsets by using a hierarchical clustering method. Both CoMFA and CoMSIA models were derived using a training set on the basis of the common substructure-based alignment. The optimum PLS model built by CoMFA and CoMSIA provided satisfactory statistical results (q² = 0.589 and r² = 0.927 and q² = 0.473 and r² = 0.802, respectively). The external predictive ability of the models was evaluated by using seven compounds. Moreover, an external evaluation set with known experimental data was used to evaluate the external predictive ability of the porposed models. The statistical parameters indicated that CoMFA (after region focusing) has high predictive ability in comparison with standard CoMFA and CoMSIA models. Molecular docking was also performed on the most active compound to investigate the existence of interactions between the most active inhibitor and the LRRK2 receptor. Based on the obtained results and CoMFA contour maps, some features were introduced to provide useful insights for designing novel and potent LRRK2 inhibitors.     

Design,synthesis, pharmacological evaluation and in silico ADMET prediction of novel substituted benzimidazole derivatives as angiotensin II–AT1 receptor antagonists based on predictive 3D QSAR models

In this study we designed novel substituted benzimidazole derivatives and predicted their absorption, distribution, metabolism, excretion and toxicity (ADMET) properties, based on a predictive 3D QSAR study on 132 substituted benzimidazoles as AngII–AT₁ receptor antagonists. The two best predicted compounds were synthesized and evaluated for AngII–AT₁ receptor antagonism. Three different alignment tools for comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) were used. The best 3D QSAR models were obtained using the rigid body (Distill) alignment method. CoMFA and CoMSIA models were found to be statistically significant with leave-one-out correlation coefficients (q²) of 0.630 and 0.623, respectively, cross-validated coefficients (r²_cv) of 0.651 and 0.630, respectively, and conventional coefficients of determination (r²) of 0.848 and 0.843, respectively. 3D QSAR models were validated using a test set of 24 compounds, giving satisfactory predicted results (r²_pred) of 0.727 and 0.689 for the CoMFA and CoMSIA models, respectively. We have identified some key features in substituted benzimidazole derivatives, such as lipophilicity and H-bonding at the 2- and 5-positions of the benzimidazole nucleus, respectively, for AT₁ receptor antagonistic activity. We designed 20 novel substituted benzimidazole derivatives and predicted their activity. In silico ADMET properties were also predicted for these designed molecules. Finally, the compounds with best predicted activity were synthesized and evaluated for in vitro angiotensin II–AT₁ receptor antagonism.     

3D QSAR and molecular docking studies of benzimidazole derivatives as hepatitis C virus NS5B polymerase inhibitors

The urgent need for novel HCV antiviral agents has provided an impetus for understanding the structural requisites of NS5B polymerase inhibitors at the molecular level. Toward this objective, comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) of 67 HCV NS5B polymerase inhibitors were performed using two methods. First, ligand-based 3D QSAR studies were performed based on the lowest energy conformations employing the atom fit alignment method. Second, receptor-based 3D QSAR models were derived from the predicted binding conformations obtained by docking all NS5B inhibitors at the allosteric binding site of NS5B (PDB ID: 2dxs). Results generated from the ligand-based model were found superior (r2cv values of 0.630 for CoMFA and 0.668 for CoMSIA) to those obtained by the receptor-based model (r2cv values of 0.536 and 0.561 for CoMFA and CoMSIA, respectively). The predictive ability of the models was validated using a structurally diversified test set of 22 compounds that had not been included in a preliminary training set of 45 compounds. The predictive r2 values for the ligand-based CoMFA and CoMSIA models were 0.734 and 0.800, respectively, while the corresponding predictive r2 values for the receptor-based CoMFA and CoMSIA models were 0.538 and 0.639, respectively. The greater potency of the tryptophan derivatives over that of the tyrosine derivatives was interpreted based on CoMFA steric and electrostatic contour maps. The CoMSIA results revealed that for a NS5B inhibitor to have appreciable inhibitory activity it requires hydrogen bond donor and acceptor groups at the 5-position of the indole ring and an R substituent at the chiral carbon, respectively. Interpretation of the CoMFA and CoMSIA contour maps in context of the topology of the allosteric binding site of NS5B provided insight into NS5B-inhibitor interactions. Taken together, the present 3D QSAR models were found to accurately predict the HCV NS5B polymerase inhibitory activity of structurally diverse test set compounds and to yield reliable clues for further optimization of the benzimidazole derivatives in the data set.     

Drug discovery studies on quinoline-based derivatives as potential antimalarial agents

Molecular modelling studies were performed to identify the essential structural requirements of quinoline-based derivatives for improving their antimalarial activity. The developed CoMFA, CoMSIA and HQSAR models for a training set comprising 37 derivatives showed good statistical significance in terms of internal cross validation (q²) 0.70, 0.69 and 0.80 and non-cross validation (r²) 0.80, 0.79 and 0.80. Also, the predicted r² values (r²_pred) of 0.63, 0.61 and 0.72 for a test set consisting of 12 compounds suggested significant predicting ability of the models. Structural features were correlated in terms of steric, electrostatic, hydrophobic, hydrogen bond donor and hydrogen bond acceptor interactions. Furthermore, the bioactive conformation was explored and explained by docking compounds #28, 32 and 40 into the active binding site of lactate dehydrogenase of Plasmodium falciparum. The QSAR models, contour map and docking binding affinity obtained could be successfully utilized as a guiding tool for the design and discovery of novel quinoline-based derivatives with potent antimalarial activity.     

Molecular modeling on pyrimidine-urea inhibitors of TNF-α production: an integrated approach using a combination of molecular docking, classification techniques, and 3D-QSAR CoMSIA

Molecular docking, classification techniques, and 3D-QSAR CoMSIA were combined in a multistep framework with the ultimate goal of identifying potent pyrimidine-urea inhibitors of TNF-α production. Using the crystal structure of p38α, all the compounds were docked into the enzyme active site. The docking pose of each compound was subsequently used in a receptor-based alignment for the generation of the CoMSIA fields. "Active" and "inactive" compounds were used to build a Random Tree classification model using the docking score and the CoMSIA fields as input parameters. Domain of applicability indicated the compounds for which activity estimations can be accepted with confidence. For the active compounds, a 3D-QSAR CoMSIA model was subsequently built to accurately estimate the IC(50) values. This novel multistep framework gives insight into the structural characteristics that affect the binding and the inhibitory activity of these analogues on p38α MAP kinase, and it can be extended to other classes of small-molecule inhibitors. In addition, the simplicity of the proposed approach provides expansion to its applicability such as in virtual screening procedures.     

Triple-layered QSAR studies on substituted 1,2,4-trioxanes as potential antimalarial agents: superiority of the quantitative pharmacophore-based alignment over common substructure-based alignment

This study reports the utilization of three approaches – pharmacophore, CoMFA/CoMSIA and HQSAR studies – to identify the essential structural requirements in 3D chemical space for the modulation of the antimalarial activity of substituted 1,2,4-trioxanes. The superiority of quantitative pharmacophore-based alignment (QuantitativePBA) over global minima energy conformer-based alignment (GMCBA) has been reported in CoMFA and CoMSIA studies. The developed models showed good statistical significance in internal validation (q ², group cross-validation and bootstrapping) and performed very well in predicting the antimalarial activity of test set compounds. Structural features in terms of their steric, electrostatic and hydrophobic interactions in 3D space have been found to be important for the antimalarial activity of substituted 1,2,4-trioxanes. Further, the HQSAR studies based on the same training and test set acted as an additional tool to find the sub-structural fingerprints of substituted 1,2,4-trioxanes for their antimalarial activity. Together, these studies may facilitate the design and discovery of new substituted 1,2,4-trioxanes with potent antimalarial activity.     

Three-dimensional Quantitative Structure-Activity Relationship Analyses of a Series of Butenolide ETA Antagonists

Two kinds of Three-dimensional Quantitative Structure-activity Relationship(3D-QSAR) methods,comparative molecular filed analysis(CoMFA) and comparative molecular similarity indices analysis (CoMSIA) ,were applied to analyze the structure-activity relationship of a series of 63 butenolide ETA selective antagonists with respect to their inhibition against human ETA receptor,The CoMFA and CoMSIA models were developed for the conceivable alignment of the molecules based on a template structure from the crystallized data.The statistical results from the initial orientation of the aligned molecules show that the 3D-QSAR model from CoMFA(q^2=0.543) is obviously superior to that from the conventional CoMSIA(q^2=0.407).In order to refine the model,all-space search (ASS) was applied to minimize the field sampling process.By rotating and translating the molecular aggregate within the grid systematically,all the possible samplings of the molecular fields were tested and subsequently the one with the highest q^2 was picked out .The comparison of the sensitivity of CoMFA and CoMSIA to different space orientation shows that the CoMFA q^2 values are more sensitive to the translations and rotations of the aligned molecules with respect to the lattice than those of CoMSIA.The best CoMFA model from ASS was further refined by the region focused technique.The high quality of the best model is indicated by the high corss-validated correlation and the prediction on the external test set.The CoMFA coefficient contour plots identify several key features that explain the wide range of activities,which may help us to design new effective ETA selective antagonists.     

QSAR models of cytochrome P450 enzyme 1A2 inhibitors using CoMFA,CoMSIA and HQSAR

Quantitative structure–activity relationship (QSAR) studies were conducted on an in-house database of cytochrome P450 enzyme 1A2 inhibitors using the comparative molecular field analysis (CoMFA), comparative molecular similarity analysis (CoMSIA) and hologram QSAR (HQSAR) approaches. The database consisted of 36 active molecules featuring varied core structures. The model based on the naphthalene substructure alignment incorporating 19 molecules yielded the best model with a CoMFA cross validation value q² of 0.667 and a Pearson correlation coefficient r² of 0.976; a CoMSIA q² value of 0.616 and r² value of 0.985; and a HQSAR q² value of 0.652 and r² value of 0.917. A second model incorporating 34 molecules aligned using the benzene substructure yielded an acceptable CoMFA model with q² value of 0.5 and r² value of 0.991. Depending on the core structure of the molecule under consideration, new CYP1A2 inhibitors will be designed based on the results from these models.     

Docking and 3D-QSAR Analysis on a Series of Pyridone-based EZH2 Inhibitors

Enhancer of Zeste homolog 2(EZH2) is closely correlated with malignant tumor and regarded as a promising target to treat B-cell lymphoma. In our research, the molecular docking and three-dimensional quantitative structure-activity relationships(3D-QSAR) studies were performed on a series of pyridone-based EZH2 compounds. Molecular docking allowed us to study the critical interactions at the binding site of EZH2 protein with inhibitors and identify the practical conformations of ligands in binding pocket. Moreover, the docking-based alignment was applied to derive the reliable 3D-QSAR models. Comparative molecular field analysis(CoMFA) and comparative molecular similarity indices analysis(CoMSIA) provided available ability of visualization. All the derived 3D-QSAR models were considered to be statistically significant with respect to the internal and external validation parameters. For the CoMFA model, q~2 = 0.649, r~2 = 0.961 and r~2 pred = 0.877. For the CoMSIA model, q~2 = 0.733, r~2 = 0.980 and r~2 pred = 0.848. With the above arguments, we extracted the correlation between the biological activity and structure. Based on the binding interaction and 3D contour maps, several new potential inhibitors with higher biological activity predicted were designed, which still awaited experimental validation. These theoretical conclusions could be helpful for further research and exploring potential EZH2 inhibitors.     

3D-QSAR and molecular docking studies of 4-methyl quinazoline derivatives as PI3Kα inhibitors

A new series of 4- methyl quinazoline derivatives was synthesized and its anti-cancer activity was assessed. It was revealed that its compounds have potent inhibition on related phosphoinositide 3-kinases alpha (PI3Kα). In this study, the three-dimensional quantitative structure-activity relationship (3D-QSAR) and molecular docking approaches were performed on a series of 4-methyl quinazoline derivatives with PI3Kα inhibitors. The 3D-QSAR study was applied using Comparative Molecular Field Analysis (CoMFA) and Comparative Molecular Similarity Indices Analysis (CoMSIA) methods, which gave the cross-validation coefficient (Q²) values of 0.850 and 0.92, the determination coefficient (R²) values of 0.998 and 0.987, and the standard error of the estimate (SEE) values of 0.017 and 0.105, respectively. The acceptable values of determination coefficient (R² test) to CoMFA and CoMSIA respectively corresponding to values of 0.793 and 0.804 utilizing a test set of seven molecules prove the high predictive ability of this model. Using AutoDock tools, Molecular docking analysis was utilized to validate 3D-QSAR methods and to explain the binding site interactions and energy between the most active ligands and the PI3Kα (PDB ID: 4JPS) receptor. Based on these results, a novel series of 4- methyl quinazoline derivatives was predicted.     

Theoretical studies on the interaction of partial agonists with the 5-HT<Subscript>2A</Subscript> receptor

A series of 51 5-HT_2A partial agonistic arylethylamines (primary or benzylamines) from different structural classes (indoles, methoxybenzenes, quinazolinediones) was investigated by fragment regression analysis (FRA), docking and 3D-QSAR approaches. The data, pEC₅₀ values and intrinsic activities (E_max) on rat arteries, show high variability of pEC₅₀ from 4 to 10 and of E_max from 15 to 70%. FRA indicates which substructures affect potency or intrinsic activity. The high contribution of halogens in para position of phenethylamines to pEC₅₀ points to a specific hydrophobic pocket. Other results suggest the significance of hydrogen bonds of the aryl moiety for activation and the contrary effect of benzyl groups on affinity (increasing) and intrinsic activity (decreasing). Results from fragment regression and data on all available mutants were considered to derive a common binding site at the rat 5-HT_2A receptor. After generation and MD simulations of a receptor model based on the β₂-adrenoceptor structure, typical derivatives were docked, leading to the suggestion of common interactions, e.g., with serines in TM3 and TM5 and with a cluster of aromatic amino acids in TM5 and TM6. The whole series was aligned by docking and minimization of the complexes. The pEC₅₀ values correlate well with Sybyl docking energies and hydrophobicity of the aryl moieties. With this alignment, CoMFA and CoMSIA approaches based on a training set of 36 and a test set of 15 compounds were performed. The correlation of pEC₅₀ with steric, electrostatic, hydrophobic and H-bond acceptor fields resulted in sufficient fit (q ²: 0.75–0.8, r ²: 0.92–0.95) and predictive power (r _pred²: 0.85–0.88). The important interaction regions largely reflect the patterns provided by the putative binding site. In particular, the fit of the aryl moieties and benzyl substituents to two hydrophobic pockets is evident.     

Homology modeling and 3D–QSAR study of benzhydrylpiperazine δ opioid receptor agonists

The binding affinity of a series of benzhydrylpiperazine δ opioid receptor agonists were pooled and evaluated by using 3D-QSAR and homology modeling/molecular docking methods. Ligand-based CoMFA and CoMSIA 3D-QSAR analyses with 46 compounds were performed on benzhydrylpiperazine analogues by taking the most active compound BW373U86 as the template. The models were generated successfully with q² value of 0.508 and r² value of 0.964 for CoMFA, and q² value of 0.530 and r² value of 0.927 for CoMSIA. The predictive capabilities of the two models were validated on the test set with R²_pred value of 0.720 and 0.814, respectively. The CoMSIA model appeared to work better in this case. A homology model of active form of δ opioid receptor was established by Swiss-Model using a reported crystal structure of active μ opioid receptor as a template, and was further optimized using nanosecond scale molecular dynamics simulation. The most active compound BW373U86 was docked to the active site of δ opioid receptor and the lowest energy binding pose was then used to identify binding residues such as s Gln105, Lys108, Leu125, Asp128, Tyr129, Leu200, Met132, Met199, Lys214, Trp274, Ile277, Ile304 and Tyr308. The docking and 3D-QSAR results showed that hydrogen bond and hydrophobic interactions played major roles in ligand-receptor interactions. Our results highlight that an approach combining structure-based homology modeling/molecular docking and ligand-based 3D-QSAR methods could be useful in designing of new opioid receptor agonists.