Organophosphate esters in water,suspended particulate matter (SPM) and sediments of the Minjiang River,China

As organic pollutants of emerging concern, organophosphate esters (OPEs) have shown toxicity to organisms after entering the water environment. However, research on OPEs in freshwater in Southwest China is very limited. The levels, distribution and partitioning behavior of OPEs in the Minjiang River and their influencing factors is still unknown. In this study, six OPEs, tri-n-butyl phosphate (TnBP), tri(2-chloroethyl)-phosphate (TCEP), trichloropropyl phosphate (TCPP), triphenyl phosphate (TPhP), tributoxyethyl phosphate (TBEP), and tris(2-ethylhexyl)-phosphate (TEHP), were determined in surface water, suspended particle matter (SPM) and sediments of the Minjiang River. The results showed that the average concentrations of Σ₆OPEs in surface water, SPM and sediments of the Minjiang River were 199.32 ± 124.95 ng/L, 38463.79 ± 45641.89 ng/g dry weight (dw) and 76.45 ± 28.00 ng/g dw, respectively. High concentrations of OPEs were detected in SPM samples, indicating that more attention should be paid to pollution in SPM. It is worth noting that the variation trend of OPEs in SPM was almost opposite to that in water but basically similar to that in sediment. The proportions of alkyl OPEs in Σ₆OPEs increased from surface water to SPM and sediments. Alkyl OPEs were the main pollutants in SPM (10.44%–80.88% of Σ₆OPEs, mean of 54.52%) and sediments (59.08%–81.30% of Σ₆OPEs, mean of 68.91%), whereas chlorinated OPEs were the most abundant components in surface water (43.16%–75.99% of Σ₆OPEs, mean of 55.50%). The water-sediment partition coefficient (logK_OC) of OPEs was 4.97–7.58, while the water-SPM partition coefficient was 6.71–10.00. No significant correlations were found between logK_OW and logK_OC. K_OW was not the main factor affecting the distribution of OPEs in the Minjiang River, China.     

Synthesis of amphiphilic sulfonamide halogenated porphyrins: MALDI-TOFMS characterization and evaluation of 1-octanol/water partition coefficients

Porphyrins are key precursors for development of photosensitizers for photodynamic therapy. A new series of ortho-halogenated tetraarylporphyrins with sulfonamide substituents have been synthesized via chlorosulfonation reaction and characterized by MALDI-TOFMS. To predict their partition properties, log K_OW of a selected range of the synthesized halogenated amphiphilic porphyrins is described. A significant effect of the number and type of halogen group as well as on the number of sulfonamide side chain was observed. The determined 1-octanol/water partition coefficients showed that it is possible to obtain compounds with a wide range of lipophilicities, from log K_OW=−2.71 till log K_OW>4, which are suitable to optimize the biological efficacy of this class of sensitizers.     

Solubility and partitioning studies with polycyclic aromatic hydrocarbons using an optimized SPME procedure

In order to determine the water solubilitiy (S _W) and octanol/water partition coefficient (K _OW) of polycyclic aromatic hydrocarbons, we have optimized the direct solid-phase microextraction (SPME) of selected compounds (fluoranthene (FLU), phenanthrene (PHE), pyrene (PYR), benz[a]anthracene (BaA), benz[a]pyrene (BaP), and coronene) from the matrices water and octanol-saturated water. By the use of a 100 μm polydimethylsiloxane fibre and magnetic stirring of the sample with glass-coated mini-impellers in combination with gas chromatography we obtained limits of determination (GC-MS) comparable to standard HPLC procedures. Only coronene could not be quantified. The determined S _W of FLU agree with reference data; for B[a]P we have obtained a 2 to 3 times higher value than described in recent literature. The obtained K _OW values are close to reference data for both single components. For a mixture of FLU, PHE, PYR, and B[a]A the measured K _OW values are 0.2–0.3 log units below tabulated values for the single components. Received: 22 July 1998 / Revised: 28 October 1998 / Accepted: 1 November 1998     

Solubility and partitioning studies with polycyclic aromatic hydrocarbons using an optimized SPME procedure

In order to determine the water solubilitiy (S _W) and octanol/water partition coefficient (K _OW) of polycyclic aromatic hydrocarbons, we have optimized the direct solid-phase microextraction (SPME) of selected compounds (fluoranthene (FLU), phenanthrene (PHE), pyrene (PYR), benz[a]anthracene (BaA), benz[a]pyrene (BaP), and coronene) from the matrices water and octanol-saturated water. By the use of a 100 μm polydimethylsiloxane fibre and magnetic stirring of the sample with glass-coated mini-impellers in combination with gas chromatography we obtained limits of determination (GC-MS) comparable to standard HPLC procedures. Only coronene could not be quantified. The determined S _W of FLU agree with reference data; for B[a]P we have obtained a 2 to 3 times higher value than described in recent literature. The obtained K _OW values are close to reference data for both single components. For a mixture of FLU, PHE, PYR, and B[a]A the measured K _OW values are 0.2–0.3 log units below tabulated values for the single components. Received: 22 July 1998 / Revised: 28 October 1998 / Accepted: 1 November 1998     

Reversed phase liquid chromatography of PCBs as a basis for the calculation of water solubility and log Kow for polychlorobiphenyls

Summary Water solubility (S _w) and log K _ow values have been determined for 154 possible polychlorobiphenyls using the retention indices obtained by RP-HPLC and structurally selected PCB congeners with known log K _ow values for the regression lines. The water solubility data are melting point corrected.

---

Umkehrphasen-Flüssig-Chromatographie von PCBs als Grundlage zur Berechnung der Wasserlöslichkeit und des log K _ow für Polychlorbiphenyle

---

Dedicated to Prof. Dr. W. Fresenius on the occasion of his 75th birthday     

Determination of Octanol–Water Partition Coefficients,Water Solubility and Vapour Pressures of Alkyl-lead Compounds

Physico-chemical properties of alkyl-lead compounds, namely aqueous solubility, octanol–water partition coefficient ( K _ow), vapour pressure and Henry's Law constant, have been determined. Vapour pressures of trialkyl-lead salts at different temperatures were measured by a gas-saturation technique in which air was passed slowly through a glass column packed with pure solid alkyl-lead compounds. K _ow of tetra-alkyl-lead (TAL) and trialkyl-lead (TriAL) were determined under different salinity and pH conditions, and the latter were related to the species (R₃Pb⁺, R₃PbOH⁰ or R₃PbCl⁰) dominating under a particular set of conditions. Regression calculations incorporating melting point corrections relate water solubility to K _ow, and provide a means of estimating either parameter for a wider range of compounds.     

Spectroscopic analysis of naphtholazobenzimidazole in organised solution

Micelle–water partition coefficient (K_x ) of naphtholazobenzimidazole dye (NAB) in aqueous solutions of cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulphate (SDS) has been determined spectrophotometerically. Changes in absorption patterns of dye caused by surfactants and solvents were quantified in terms of dye–surfactant ratio (n _D/n _S) and solvent water partition coefficients (P), respectively. Multiple residence sites have been suggested for dye molecules within micelles, based on shifts in azo-hydrazone tautomeric equilibrium. Micelle–water partition coefficients were used to evaluate the influence of dye on critical micelle concentration of CTAB and SDS. At same micelle concentration, M, the relative solubility of NAB was greater in cationic surfactant CTAB than in anionic surfactant SDS.     

Synthesis and liquid crystalline properties of substituted 2,5‐diaryl 1,3,4‐oxadiazole derivatives without flexible chains

A series of new compounds based on aromatically 2,5‐disubstituted 1,3,4‐oxadiazoles without flexible chains, formulated as p‐R–C₆H₄–(OC₂N₂)–(p‐C₆H₄)₂–R′ with (i) R = CH₃O, R′ = CH₃O, CH₃S, F, H (Ia–Id), (ii) R = CH₃S, R′ = CH₃O, CH₃S, F, H (IIa–IId) and (iii) R = F, R′ = CH₃O, CH₃S, F, H (IIIa–IIId) (p‐C₆H₄ and OC₂N₂ represent a p‐phenylene spacer and a 1,3,4‐oxadiazole ring, respectively), were synthesised and characterised by ¹H and ¹³C NMR, MS and HRMS techniques. Mesomorphic properties were investigated using differential scanning calorimetry and polarizing optical microscopy. All of the target compounds (except Id, IId, IIIc and IIId) exhibited an enantiotropic nematic mesophase with high melting temperatures. The liquid crystalline properties of these compounds were influenced greatly by polarity, steric factors and positions of the terminal groups. The effect of the terminal groups on the liquid crystal properties is discussed.     

Determination of distribution coefficients of polycyclic aromatic nitrogen heterocycles using solid-phase microextraction

The possibility and the efficiency of solid-phase microextraction (SPME) for determination of distribution coefficients of polycyclic aromatic nitrogen heterocycles (PANHs) in aqueous samples are presented in this study. Influence of sample extraction conditions, extraction time, stirring rate, pH, salinity and temperature were tested to optimize extraction efficiency. Three types of fibre sorbent layers, PDMS, PDMS/DVB and PA, were tested and fibre/water distribution coefficients, K_{f s} , were calculated. The extraction efficiency for PANHs increased in the order PDMS?<?PA?<?PDMS/DVB. Values of log?K_fs ranged from 0.2 to 2.7 for PDMS, from 0.4 to 3.6 for PA and from 1.4 to 4.4 for PDMS/DVB. The values of log?K_fs were correlated with octanol/water distribution coefficients log?K_ow . The relationship between log?K_fs and log?K_ow shows linear response with regression coefficient in the range of 0.985 and 0.997.