An unexpected possible role of base in asymmetric catalytic hydrogenations of ketones. Synthesis and characterization of several key catalytic intermediates

The dihydrogen compound trans-[Ru((R)-BINAP)(H)(eta2-H2)((R,R)-dpen)]+ (2', BINAP = 2,2'-bis(diphenylphosphino)-1,1'-binaphthyl, dpen = 1,2-diphenylethylenediamine) is a proposed intermediate in asymmetric ketone hydrogenations. It quickly reacts at -80 degrees C with 1 equiv of the base KOtBu in 2-PrOH-d8/CH2Cl2-d2 under H2 to generate trans-Ru((R)-BINAP)(H)(2-PrO)((R,R)-dpen) (4). The alkoxide 4 does not react with H2 after hours under ambient conditions. Addition of 1 equiv of KOtBu to 4 produces a hydrogen bonded species 10 that reacts readily with H2 at -80 degrees C to generate the dihydride catalytic intermediate trans-[Ru((R)-BINAP)(H)2((R,R)-dpen)] (3'). Addition of 1 equiv of ((CH3)3Si)2NK to the alkoxide 4 produces the amide catalytic intermediate 5. Compound 5 reacts reversibly with H2 to generate 3'.     

Experimental investigations of a partial Ru-O bond during the metal-ligand bifunctional addition in Noyori-type enantioselective ketone hydrogenation

The transition state for the metal-ligand bifunctional addition step in Noyori's enantioselective ketone hydrogenation was investigated using intramolecular trapping experiments. The bifunctional addition between the Ru dihydride trans-[Ru((R)-BINAP)(H)(2)((R,R)-dpen)] and the hydroxy ketone 4-HOCH(2)C(6)H(4)(CO)CH(3) at -80 °C exclusively formed the corresponding secondary ruthenium alkoxide trans-[Ru((R)-BINAP)(H)(4-HOCH(2)C(6)H(4)CH(CH(3))O)((R,R)-dpen)]. Combined with the results of control experiments, this observation provides strong evidence for the formation of a partial Ru-O bond in the transition state.     

Rhenium hydride/boron Lewis acid cocatalysis of alkene hydrogenations: activities comparable to those of precious metal systems

Dibromonitrosyl(dihydrogen)rhenium(I) complexes [ReBr(2)(NO)(PR(3))(2)(η(2)-H(2))] (1; R = iPr, a; Cy, b) and Me(2)NH·BH(3) (DMAB) catalyze at either 90 °C or ambient temperature under 10 bar of H(2) the hydrogenation of various terminal and cyclic alkenes (1-hexene, 1-octene, cyclooctene, styrene, 1,5-cyclooctadiene, 1,7-octadiene, α-methylstyrene). Maximum turnover frequency (TOF) values of 3.6 × 10(4) h(-1) at 90 °C and 1.7 × 10(4) h(-1) at 23 °C were achieved in the hydrogenation of 1-hexene. The extraordinary catalytic performance of the 1/DMAB system is attributed to the formation of five-coordinate rhenium(I) hydride complexes [Re(Br)(H)(NO)(PR(3))(2)] (2; R = iPr, a; Cy, b) and the action of the Lewis acid BH(3) originating from DMAB. The related 2/BH(3)·THF catalytic system also exhibits under the same conditions high activity in the hydrogenation of various alkenes with a maximum turnover number (TON) of 1.2 × 10(4) and a maximum TOF of 4.0 × 10(4) h(-1). For the hydrogenations of 1-hexene with 2a and 2b, the effect of the strength of the boron Lewis acid was studied, the acidity being in the following order: BCl(3) > BH(3) > BEt(3) ≈ BF(3) > B(C(6)F(5))(3) > BPh(3) ? B(OMe)(3). The order in catalytic activity was found to be B(C(6)F(5))(3) > BEt(3) ≈ BH(3)·THF > BPh(3) ? BF(3)·OEt(2) > B(OMe)(3) ? BCl(3). The stability of the catalytic systems was checked via TON vs time plots, which revealed the boron Lewis acids to cause an approximate inverse order with the Lewis acid strength: BPh(3) > BEt(3) ≈ BH(3)·THF > B(C(6)F(5))(3). For the 2a/BPh(3) system a maximum TON of 3.1 × 10(4) and for the 2a/B(C(6)F(5))(3) system a maximum TOF of 5.6 × 10(4) h(-1) were obtained in the hydrogenation of 1-hexene. On the basis of kinetic isotope effect determinations, H(2)/D(2) scrambling, halide exchange experiments, Lewis acid variations, and isomerization of terminal alkenes, an Osborn-type catalytic cycle is proposed with olefin before H(2) addition. The active rhenium(I) monohydride species is assumed to be formed via reversible bromide abstraction with the "cocatalytic" Lewis acid. Homogeneity of the hydrogenations was tested with filtration and mercury poisoning experiments. These "rhenium(I) hydride/boron Lewis acid" systems demonstrate catalytic activities comparable to those of Wilkinson- or Schrock-Osborn-type hydrogenations accomplished with precious metal catalysts.     

A ruthenium-dihydrogen putative intermediate in ketone hydrogenation

The compound fac-[Ru((R)-BINAP)(H)(2-PrOH)3]+ (6) (BINAP = 2,2'-bis(diphenylphosphino)-1,1'-binaphthyl) reacts with (R,R)-dpen (dpen = 1,2-diphenylethylenediamine) under H2 at -60 degrees C in 2-PrOH-d8/CD2Cl2 to generate the cationic dihydrogen putative intermediate trans-[Ru((R)-BINAP)(H)(eta2-H2)((R,R)-dpen)]+ (2') without H-D exchange between the hydrogen ligands and the solvent. A 1H NMR study concludes that the dihydrogen ligand in 2' does not protonate 2-PrOH to a catalytically significant extent, and that 2' requires an added base or hydride source to be an active catalyst.     

Direct observations of the metal-ligand bifunctional addition step in an enantioselective ketone hydrogenation

The catalytic intermediate trans-[Ru((R)-BINAP)(H)2((R,R)-dpen)] (1) reacted on mixing with acetophenone in THF at -80 degrees C under approximately 2 atm H2 to generate the alkoxide trans-Ru((R)-BINAP)(H)((Ph)(Me)CHO)((R,R)-dpen) (6). Contrary to expectations, free Ru-amide and 1-phenylethanol were not the immediate products of this addition reaction. The addition reaction was reversible in THF. 2-Propanol prevents racemization of the alcohol product in THF solvent.     

BINAP: rhodium–diolefin complexes in asymmetric hydrogenation

The complexes [Rh((S)-BINAP)(COD)]BF₄ 1, [Rh((S)-BINAP)(NBD)]BF₄ 2, [Rh((R)-BINAP)(COD)]OTf 3, [Rh((R)-BINAP)(NBD)]OTf 4, and [Rh((R)-BINAP)(COD)]BArF 5 were synthesized, and 1–4 were analyzed by single crystal X-ray crystallography. The transformation of these precatalysts into hydrogenation-active species was investigated as well as the hydrogenation of prochiral olefins. In particular, this series of transformations was investigated with regard to solvent and counterions.     

Exploring stereogenic phosphorus: synthetic strategies for diphosphines containing bulky,highly symmetric substituents

Diphosphine ligands bearing highly symmetric, bulky substituents at a stereogenic P atom were prepared, exploiting established protocols, which include the use of chiral synthons such as 3,4-dimethyl-2,5-diphenyl-1,3,2-oxazaphospholidine-2-borane (3a) and phenylmethylchlorophosphine borane (10) and the enantioselective deprotonation of dimethylarylphosphine boranes. However, only (Bu(t)())(Me)PCH(2)CH(2)P(Bu(t)Me (8a) could be prepared from 3a. The diphosphines (S,S)-1,2-bis(mesitylmethylphosphino)ethane, ((S,S)-8b) and (S,S)-1,2-bis(9-anthrylmethylphosphino)ethane ((S,S)-8c), which contain 2,6-disubstituted aryl P-substituents, were prepared by Evans' sparteine-assisted enantioselective deprotonation of P(Ar)(Me)(2)(BH(3)) (Ar = mesityl or 9-anthryl), but the enantioselectivity did not exceed 37% ee. The asymmetrically substituted, methylene-bridged diphosphine (2R,4R)-(Ph)(CH(3))PCH(2)P(Mes)(CH(3)) ((2R,4R)-12) (Mes = mesityl) was prepared by the newly developed stereospecific reaction of the enantiomerically pure chlorophosphine borane PCl(Ph)(Me)(BH(3)) (10) with the racemic, monolithiated dimethylmesitylphosphine borane P(Mes)(Me)(CH(2)Li)(BH(3)). Diastereomerically pure (2R,4R)-12 was obtained with 86% ee. The rhodium(I) derivatives [Rh(COD)(P-P)]BF(4) containing the diphosphine ligands 8a, 8b, and 12, as well as the previously reported (S,S)-1,2-bis(1-naphthylphenylphosphino)ethane ((S,S)-8d), were prepared and tested in the enantioselective catalytic hydrogenation of acetamidocinnamates. The best catalytic result (98.6% ee) was obtained with [Rh(COD)(8d)](+) as catalyst and methyl Z-alpha-acetamidocinnamate as substrate. Some of the catalytic results are discussed in terms of the preferred conformations of the substituents at phosphorus, as calculated by molecular modeling.     

Considering Fe(II/IV) redox processes as mechanistically relevant to the catalytic hydrogenation of olefins by [PhBP iPr 3]Fe-H x species

Several coordinatively unsaturated pseudotetrahedral iron(II) precursors, [PhBP(iPr)(3)]Fe-R ([PhBP(iPr)(3)] = [PhB(CH(2)P(i)Pr(2))(3)](-); R = Me (2), R = CH(2)Ph (3), R = CH(2)CMe(3) (4)) have been prepared from [PhBP(iPr)(3)]FeCl (1) that serve as precatalysts for the room-temperature hydrogenation of unsaturated hydrocarbons (e.g., ethylene, styrene, 2-pentyne) under atmospheric H(2) pressure. The solid-state crystal structures of 2 and 3 are presented. To gain mechanistic insight into the nature of these hydrogenation reactions, a number of [PhBP(iPr)(3)]-supported iron hydrides were prepared and studied. Room-temperature hydrogenation of alkyls 2-4 in the presence of a trapping phosphine ligand affords the iron(IV) trihydride species [PhBP(iPr)(3)]Fe(H)(3)(PR(3)) (PR(3) = PMe(3) (5); PR(3) = PEt(3) (6); PR(3) = PMePh(2) (7)). These spectroscopically well-defined trihydrides undergo hydrogen loss to varying degrees in solution, and for the case of 7, this process leads to the structurally identified Fe(II) hydride product [PhBP(iPr)(3)]Fe(H)(PMePh(2)) (9). Attempts to prepare 9 by addition of LiEt(3)BH to 1 instead lead to the Fe(I) reduction product [PhBP(iPr)(3)]Fe(PMePh(2)) (10). The independent preparations of the Fe(II) monohydride complex [PhBP(iPr)(3)]Fe(II)(H)(PMe(3)) (11) and the Fe(I) phosphine adduct [PhBP(iPr)(3)]Fe(PMe(3)) (8) are described. The solid-state crystal structures of trihydride 5, monohydride 11, and 8 are compared and demonstrate relatively little structural reorganization with respect to the P(3)Fe-P' core motif as a function of the iron center's formal oxidation state. Although paramagnetic 11 (S = 1) is quantitatively converted to the diamagnetic trihydride 5 under H(2), the Fe(I) complex 8 (S = (3)/(2)) is inert toward atmospheric H(2). Complex 10 is likewise inert toward H(2). Trihydrides 5 and 6 also serve as hydrogenation precatalysts, albeit at slower rates than that for the benzyl complex 3 because of a rate-contributing phosphine dependence. That these hydrogenations appear to proceed via well-defined olefin insertion steps into an Fe-H linkage is indicated by the reaction between trihydride 5 and ethylene, which cleanly produces the ethyl complex [PhBP(iPr)(3)]Fe(CH(2)CH(3)) (13) and an equivalent of ethane. Mechanistic issues concerning the overall reaction are described.     

Olefins as steering ligands for homogeneously catalyzed hydrogenations

Iridium(I) complexes containing a (5H-dibenzo[a,d]cyclohepten-5-yl)-phosphane (tropp(R); R = phosphorus-bound substituent = Ph, Cyc) as a rigid, concave-shaped, mixed phosphane olefin ligand were prepared and tested as catalyst precursors in the hydrogenation of imines. With the complex [Ir(tropp(Cyc))(cod)]OTf, turnover frequencies (TOFs) of >6000 h(-1) were reached in the hydrogenation of N-phenyl-benzylidenamine, PhN==CHPh. Lower activities (TOF>80 h(-1)) are observed with N-phenyl-(1-phenylethylidene)amine, PhN==CMePh. Chiral tropp-type ligands were prepared in few simple steps. Monosubstitution of the olefinic unit in the dibenzo[a,d]cycloheptenyl moiety with (R)- or (S)-mentholate gave mixtures of diastereomers that could be separated and isolated in enantiomerically pure form. Iridium(I) complexes with these ligands are rare examples of side-on bonded enolether complexes. In catalytic imine hydrogenations, complete conversion (>98 %) was reached in all cases (conditions: p[H(2)] = 50 bar, T = 50 degrees C, t = 2 h, substrate/catalyst 100:1). The best enantiomeric excess (ee = 86 % S isomer) was reached with PhN==CMePh as substrate and the R,R form of the (10-menthyloxy-5H-dibenzo[a,d]cyclohepten-5-yl)diphenylphosphane ligand. The iridium(I) complex containing the same phosphane gave a 60 % ee (S isomer) with the enamide N-(1-phenylvinyl)acetamide as substrate (conditions: p[H(2)] = 4 bar, T = 50 degrees C, t = 18 h, substrate/catalyst = 50:1). These reactions constitute the first examples in which chiral olefins have been used as steering ligands in catalytic enantioselective hydrogenations.     

Diastereoselective oxidative addition of dihydrogen to IrI(CO)((R)-BINAP) and [Ir(CO)2((R)-BINAP)][SbF6

Two chiral iridium(I) (R)-BINAP complexes, IrI(CO)((R)-BINAP) (1) and [Ir(CO)2((R)-BINAP)][SbF6] (2), have been synthesized and characterized, and their reactivity with dihydrogen has been studied. Complex 1 is formed on the addition of (R)-BINAP to [Bu4N][IrI2(CO)2] in toluene, and 2 is generated by the addition of AgSbF6 to a solution of 1 in dichloromethane under CO. A structure determination of complex 2 confirms a square planar coordination geometry, while that of 1 reveals a significant tetrahedral distortion from the expected planar coordination. Additionally, the structure of 1 shows a disorder between iodide and CO ligands. The reaction of 1 with H2 proceeds under kinetic control and shows a high degree of kinetic and thermodynamic selectivity; the kinetic product is formed by H2 addition across the P-Ir-CO axis of IrI(CO)((R)-BINAP) and yields two diastereomers which then convert over time to two more stable diastereomers which correspond to oxidative addition across the P-Ir-I axis. The kinetically favored diastereomers are formed in an initial ratio of 8.6:1, corresponding to a DeltaDeltaG* of 1.27 kcal/mol. The reaction of H2 with the C2-symmetric complex 2 also leads to the formation of two diastereomers, with one favored over the other kinetically by a 9.9:1 ratio on extrapolation to t = 0. When these reactions are followed using parahydrogen NMR methods, only one of the initially formed diastereomers in each case is found to exhibit substantial parahydrogen-induced polarization in the hydride resonances at room temperature.     

Chiral iridium [corrected] xyliphos complexes for the catalytic imine hydrogenation leading to the metolachlor herbicide: isolation of catalyst-substrate adducts

Iridium complexes relevant to the catalytic enantioselective hydrogenation of 2-methyl-6-ethylphenyl-1'-methyl-2'-methoxyethylimine (MEA-imine, 1) in the Syngenta Metolachlor (3) process were prepared and characterized. Reaction of the diphosphane (S)-1-[(R)-2-(diphenylphosphanyl)ferrocenyl]ethyldi(3,5-xylyl)phosphane ((S)-(R)-Xyliphos, (S)-(R)-4) with [Ir(2)(micro-Cl)(2)(cod)(2)] (cod=1,5-cyclooctadiene) afforded [Ir(Cl)(cod)[(S)-(R)-4]] (7), which reacted with AgBF(4) to form [Ir(cod)[(S)-(R)-4]]BF(4) (8). Complexes 7 and 8 reacted with iodide to yield [Ir(I)(cod)[(S)-(R)-4]] (9). When 9 was treated with one and two equivalents of HBF(4), two isomers of the cationic Ir(III) iodo hydrido complex [Ir(I)(H)(cod)[(S)-(R)-4]]BF(4) were solated (10 and 11, respectively). Complex 9 was oxidized with one equivalent of I(2) to give the iodo-bridged dinuclear species [Ir(2)I(2)(micro-I)(3)[(S)-(R)-4](2))]I (12). [Ir(2)(micro-Cl)(2)(coe)(4)] (coe=cyclooctene) reacted with (S)-(R)-4 to yield the chloro-bridged dinuclear complex [Ir(2)(micro-Cl)(2)[(S)-(R)-4](2)] (13). Complexes 7-12 were structurally characterized by single-crystal X-ray diffraction and tested as single-component catalyst precursors for enantioselective hydrogenation of MEA-imine. Complex 10 and dinuclear complex 12 gave the best catalytic results. Efforts were also directed at isolating substrate- or product-catalyst adducts: Treatment of 8 with 2,6-dimethylphenyl-1'-methyl-2'-methoxyethylimine (DMA-imine, 14, a model for 1) under H(2) allowed four isomers of [Ir(H)(2)[(S)-(R)-4](14)]BF(4) (18-21) to be isolated. These analytically pure isomers were fully characterized by 2D NMR techniques. X-ray structural analysis of an Ir(I)-imine adduct, namely, [Ir(C(2)H(4))(2)(14)]BF(4) (25), which was prepared by reacting [IrCl(C(2)H(4))(4)] with [Ag(14)(2)]BF(4) (16), confirmed the kappa(2) coordination mode of imine 14.     

How to turn the catalytic asymmetric hydroboration reaction of vinylarenes into a recyclable process

Optically pure rhodium(I) complexes [Rh(cod)(Lbond;L)]X (cod=cyclooctadiene; L-L= (R)-2,2'-bis(diphenylphosphino)1-1'-binaphthyl ((R)-BINAP), (S,S)-2,4-bis(diphenylphosphino)pentane ((S,S)-BDPP), 2-diphenylphosphino-1-(1'-isoquinolyl)naphthalene ((S)-QUINAP); X=BF(4), PF(6), SO(3)CF(3), BPh(4)) were immobilised onto smectite clays such as montmorillonite K-10 (MK-10) and bentonite (Na(+)-M). (19)F, (31)P and (11)B NMR experiments recorded in CDCl(3) during the impregnation process provided evidence that montmorillonite K-10 may immobilise ionic metal complexes throughout the cationic and anionic counterparts. However, when bentonite was used as the solid, only the cationic metal complex was immobilised through cationic exchange while the counteranion remained in solution. When we used these preformed catalytic systems in the hydroboration of prochiral vinylarenes, we obtained high activities and enantiomeric excess with (S)-1-(2-diphenylphosphino-1-naphthyl)isoquinoline-modified rhodium complexes. These activities and selectivities are competitive with the homogeneous counterparts. The significant features of this method are the simple separation and good retention of the active metal in the solid, which allows efficient recycling even on exposure to air.     

Palladium-catalyzed asymmetric phosphination. Scope, mechanism, and origin of enantioselectivity

Asymmetric cross-coupling of aryl iodides (ArI) with secondary arylphosphines (PHMe(Ar'), Ar' = (2,4,6)-R3C6H2; R = i-Pr (Is), Me (Mes), Ph (Phes)) in the presence of the base NaOSiMe3 and a chiral Pd catalyst precursor, such as Pd((R,R)-Me-Duphos)(trans-stilbene), gave the tertiary phosphines PMe(Ar')(Ar) in enantioenriched form. Sterically demanding secondary phosphine substituents (Ar') and aryl iodides with electron-donating para substituents resulted in the highest enantiomeric excess, up to 88%. Phosphination of ortho-substituted aryl iodides required a Pd(Et-FerroTANE) catalyst but gave low enantioselectivity. Observations during catalysis and stoichiometric studies of the individual steps suggested a mechanism for the cross-coupling of PhI and PHMe(Is) (1) initiated by oxidative addition to Pd(0) yielding Pd((R,R)-Me-Duphos)(Ph)(I) (3). Reversible displacement of iodide by PHMe(Is) gave the cation [Pd((R,R)-Me-Duphos)(Ph)(PHMe(Is))][I] (4), which was isolated as the triflate salt and crystallographically characterized. Deprotonation of 4-OTf with NaOSiMe3 gave the phosphido complex Pd((R,R)-Me-Duphos)(Ph)(PMeIs) (5); an equilibrium between its diastereomers was observed by low-temperature NMR spectroscopy. Reductive elimination of 5 yielded different products depending on the conditions. In the absence of a trap, the unstable three-coordinate phosphine complex Pd((R,R)-Me-Duphos)(PMeIs(Ph)) (6) was formed. Decomposition of 5 in the presence of PhI gave PMeIs(Ph) (2) and regenerated 3, while trapping with phosphine 1 during catalysis gave Pd((R,R)-Me-Duphos)(PHMe(Is))2 (7), which reacted with PhI to give 3. Deprotonation of 1:1 or 1.4:1 mixtures of cations 4-OTf gave the same 6:1 ratio of enantiomers of PMeIs(Ph) (2), suggesting that the rate of P inversion in 5 was greater than or equal to the rate of reductive elimination. Kinetic studies of the first-order reductive elimination of 5 were consistent with a Curtin-Hammett-Winstein-Holness (CHWH) scheme, in which pyramidal inversion at the phosphido ligand was much faster than P-C bond formation. The absolute configuration of the phosphine (SP)-PMeIs(p-MeOC6H4) was determined crystallographically; NMR studies and comparison to the stable complex 5-Pt were consistent with an RP-phosphido ligand in the major diastereomer of the intermediate Pd((R,R)-Me-Duphos)(Ph)(PMeIs) (5). Therefore, the favored enantiomer of phosphine 2 appeared to be formed from the major diastereomer of phosphido intermediate 5, although the minor intermediate diastereomer underwent P-C bond formation about three times more rapidly. The effects of the diphosphine ligand, the phosphido substituents, and the aryl group on the ratio of diastereomers of the phosphido intermediates Pd(diphos*)(Ar)(PMeAr'), their rates of reductive elimination, and the formation of three-coordinate complexes were probed by low-temperature 31P NMR spectroscopy; the results were also consistent with the CHWH scheme.     

Palladium-catalyzed asymmetric phosphination: enantioselective synthesis of a p-chirogenic phosphine

The racemic secondary phosphine PH(Me)(Is) (1, Is = 2,4,6-(i-Pr)3C6H2) was coupled with PhI in the presence of NaOSiMe3 and the catalyst Pd((R,R)-Me-Duphos)(Ph)(I) (3) to give P(Ph)(Me)(Is) (2) in up to 78% ee. The intermediate phosphido complex Pd((R,R)-Me-Duphos)(Ph)(P(Me)(Is)) (5a,b) was observed as a mixture of diastereomers by low-temperature 31P NMR. The rate of interconversion of 5a,b by phosphorus inversion is greater than or equal to that of reductive elimination, which suggests that the enantiodetermining step occurs after Pd-P bond formation.     

Novel hydrido-ruthenium(II) complexes with histidine derivatives and their application in the hydrogenation of ketones

The complexes RuHCl((R)-binap)(L-NH2) with L-NH2 = (S)-histidine-Me-ester (1), histamine (3), (S)-histidinol (4) or 1-Me-(S)-histidine-Me-ester (5), and RuHCl((S)-binap)(L-NH(2)) with L-NH2 = (S)-histidine-Me-ester (2) have been prepared in 60-81% overall yields in a one-pot, three-step procedure from the precursor RuCl2(PPh3)3. Their octahedral structures with hydride trans to chloride were deduced from their NMR spectra and confirmed by the results of a single crystal X-ray diffraction study for complex 3. Under H2 and in the presence of KOtBu, complexes 1-5 in 2-propanol form moderately active catalyst precursors for the asymmetric hydrogenation of acetophenone to 1-phenylethanol. Complex 5 is more active and enantioselective than complexes 1-4, allowing complete conversion to 1-phenylethanol in 46% e.e. (R) in 72 h at 20 degrees C under 1 MPa of H2 with substrate : catalyst : base = 2000 : 1 : 30. Complex 5, when activated, also catalyzes the hydrogenation of trans-4-phenyl-3-buten-2-one to exclusively the allyl alcohol 4-phenyl-3-buten-2-ol under 2.7 MPa of H2 at 50 degrees C in 2-propanol. This selectivity for C=O versus C=C hydrogenation is consistent with a mechanism involving the outer sphere transfer of hydride and proton to the polar bond. Further extensions to complexes with peptides with N-terminal histidine groups appear feasible on the basis of the current work.     

Role of the NH2 functionality and solvent in terdentate CNN alkoxide ruthenium complexes for the fast transfer hydrogenation of ketones in 2-propanol

The reaction of [RuCl(CNN)(dppb)] (1; HCNN=6-(4-methylphenyl)-2-pyridylmethylamine) with NaOiPr in 2-propanol/C6D6 affords the alcohol adduct alkoxide [Ru(OiPr)(CNN)(dppb)].n iPrOH (5), containing the Ru-NH2 linkage. The alkoxide [Ru(OiPr)(CNN)(dppb)] (4) is formed by treatment of the hydride [Ru(H)(CNN)(dppb)] (2) with acetone in C6D6. Complex 5 in 2-propanol/C6D6 equilibrates quickly with hydride 2 and acetone with an exchange rate of (5.4+/-0.2) s(-1) at 25 degrees C, higher than that found between 4 and 2 ((2.9+/-0.4) s(-1)). This fast process, involving a beta-hydrogen elimination versus ketone insertion into the Ru-H bond, occurs within a hydrogen-bonding network favored by the Ru-NH2 motif. The cationic alcohol complex [Ru(CNN)(dppb)(iPrOH)](BAr(f)4) (6; Ar(f)=3,5-C6H3(CF3)2), obtained from 1, Na[BAr(f)4], and 2-propanol, reacts with NaOiPr to afford 5. Complex 5 reacts with either 4,4'-difluorobenzophenone through hydride 2 or with 4,4'-difluorobenzhydrol through protonation, affording the alkoxide [Ru(OCH(4-C6H4F)2)(CNN)(dppb)] (7) in 90 and 85 % yield of the isolated product. The chiral CNN-ruthenium compound [RuCl(CNN)((S,S)-Skewphos)] (8), obtained by the reaction of [RuCl2(PPh3)3] with (S,S)-Skewphos and orthometalation of HCNN in the presence of NEt3, is a highly active catalyst for the enantioselective transfer hydrogenation of methylaryl ketones (turnover frequencies (TOFs) of up to 1.4 x 10(6) h(-1) at reflux were obtained) with up to 89% ee. Also the ketone CF3CO(4-C6H4F), containing the strong electron-withdrawing CF3 group, is reduced to the R alcohol with 64% ee and a TOF of 1.5 x 10(4) h(-1). The chiral alkoxide [Ru(OiPr)(CNN)((S,S)-Skewphos)]n iPrOH (9), obtained from 8 and NaOiPr in the presence of 2-propanol, reacts with CF3CO(4-C6H4F) to afford a mixture of the diastereomer alkoxides [Ru(OCH(CF3)(4-C6H4F))(CNN)((S,S)-Skewphos)] (10/11; 74% yield) with 67% de. This value is very close to the enantiomeric excess of the alcohol (R)-CF3CH(OH)(4-C6H4F) formed in catalysis, thus suggesting that diastereoisomeric alkoxides with the Ru-NH2 linkage are key species in the catalytic asymmetric transfer hydrogenation reaction.     

Chiral phosphane alkenes (PALs): simple synthesis, applications in catalysis, and functional hemilability

A simple synthesis of a chiral phosphane alkene (PAL) involves: 1) palladium-catalyzed Suzuki coupling of 10-bromo-5H-dibenzo[a,d]cyclohepten-5-ol (1) with phenylboronic acid to give quantitatively 10-phenyl-5H-dibenzo[a,d]cyclohepten-5-ol (2); 2) reaction of 2 with Ph(2)PCl under acidic conditions to give a racemic mixture of the phosphane oxide (10-phenyl-5H-dibenzo[a,d]cyclohepten-5-yl)diphenylphosphane oxide ((Ph)troppo(Ph), 3), which is separated into enantiomers by using high-pressure liquid chromatography (HPLC) on a chiral column; 3) reduction with trichlorosilane to give the enantiomerically pure phosphanes (R)- and (S)-(10-phenyl-5H-dibenzo[a,d]cyclohepten-5-yl)diphenylphosphane ((Ph)tropp(Ph), 4). This highly rigid, concave-shaped ligand serves as a bidentate ligand in Rh(I) and Ir(I) complexes. Catalysts prepared from [Rh(2)(mu(2)-Cl)(2)(C(2)H(4))(4)] and (S)-4 have allowed the efficient enantioselective 1,4-addition of arylboronic acids to alpha,beta-unsaturated carbonyls (Hayashi-Miyaura reaction) (5-0.1 mol % catalyst, up to 95% ee). The iridium complex (S,S)-[Ir((Ph)tropp(Ph))(2)]OTf ((S,S)-6; OTf=SO(3)CF(3)) has been used as a catalyst in the hydrogenation of various nonfunctionalized and functionalized olefins (turnover frequencies (TOFs) of up to 4000 h(-1)) and moderate enantiomeric excesses have been achieved (up to 67% ee). [Ir((Ph)tropp(Ph))(2)]OTf reversibly takes up three equivalents of H(2). The highly reactive octahedral [Ir(H)(2)(OTf)(CH(2)Cl(2))(H(2)-(Ph)tropp(Ph))(2)] could be isolated and contains two hydrogenated monodentate H(2)-(Ph)tropp(Ph) phosphanes, one CH(2)Cl(2) molecule, one triflate anion, and two hydrides. Based on this structure and extensive NMR spectroscopic studies, a mechanism for the hydrogenation reactions is proposed.     

Novel metal complexes containing a chiral trinitrogen isoindoline-based pincer ligand: in situ synthesis and structural characterization

The first synthesis and characterization of metal coordinated complexes containing in situ prepared chiral trinitrogen 1,3-bis(4,5-dihydrooxazol-2-ylimino)isoindoline-based pincer ligands are reported. Two zinc complexes, isolated as Zn(L)(2), where L = 1,3-bis(4,5-dihydro-4-(R)-phenyloxazol-2-ylimino)isoindoline ((R,R)-5) or 1,3-bis(4,5-dihydro-4-(S)-iso-propyloxazol-2-ylimino)isoindoline ((S,S)-6), respectively, are reported. Complexes Zn((R,R)-5)(2) and Zn((S,S)-6)(2) were prepared in situ through the condensation of phthalonitrile with enantiopure 2-amino-4-(R)-phenyloxazoline ((R)-3) or 2-amino-4-(S)-iso-propyloxazoline ((S)-4) in the presence of ZnCl(2) at 80 °C in dry toluene over 3-4 days. The characterizations of Zn((R,R)-5)(2) and Zn((S,S)-6)(2) in both the solid (X-ray crystallography) and solution (multinuclear NMR spectroscopy) states are reported.     

Evidence for a dinuclear mechanism in alkyne hydrogenations catalyzed by pyrazolate-bridged diiridium complexes

The products obtained from the sequential reaction of [Ir2(mu-H)(mu-Pz)2H3(NCCH3)(PiPr3)2] (1) with diphenylacetylene and their subsequent reactions with hydrogen have been investigated in order to deduce the mechanisms operating in the hydrogenation reactions catalyzed by 1. The reaction of 1 with an excess of diphenylacetylene gives cis-stilbene and [Ir2(mu-H)(mu-Pz)2-[eta1-C6H4-2-[eta1-(Z)-C=CHPh]]((Z)-C(Ph) =CHPh](NCCH3)(PiPr3)2] (2), the structure of which has been determined by X-ray diffraction. The formation of 2 involves the intermediate species [Ir2(mu-H)(mu-Pz)2H2((Z)-C(Ph)=CHPh](NCCH3)-(PiPr3)2](3),[Ir2(mu-H)(mu-Pz)2H[(Z)-C(Ph)=CHPh]2(NCCH3)(PiPr3)2] (4), and [Ir2(mu-H)(mu-Pz)2H[eta1-C6H4-2-[eta1-(Z)-C=CHPh](NCCH3)(PiPr3)2] (5), which have been isolated and characterized. These three complexes react with hydrogen to give cis-stilbene and 1 and are possible intermediates of the diphenylacetylene hydrogenation under catalytic conditions. Nevertheless, the rate of formation of 5 is very slow compared with the rate of catalytic hydrogenation, which excludes its participation during catalysis. Compound 2 also reacts with hydrogen in benzene, but in this case the hydrogenation gives 1,2-diphenylethane as the sole organic product. The course of this reaction in acetone has been investigated, and deuteration experiments were carried out. The formation of [Ir2(mu-H)(mu-Pz)2H[eta1-C6H4-2-[eta1-(Z)-C=CHPh]](OC(CD3)2)(PiPr3)2] (6) and [Ir2(mu-H)(mu-Pz)2H[eta1-C6H4-2-[eta1-(Z)-C-CHPh]](NCCH3)(PiPr3)2] (7) was observed under these conditions. The experimental evidence obtained supports two alternative mechanisms for the alkyne hydrogenation catalyzed by 1, one of them being dinuclear and the other mononuclear. The experimental data suggest that the former is favored.     

Highly diastereoselective dihydride formation by activation of methanol with IrCl((S)-binap)(PPh3)

Reaction of [IrCl((S)-binap)(PPh3)] ((S)-3) with methanol gave one of the diastereomers of the cis,mer-dihydride, cis,mer-OC-6-44-A-[IrCl(H2)((S)-binap)(PPh3)] ((S)-4a) stereoselectively, the structure of which was determined crystallographically, whereas the reaction of (S)-3 with H2 produced a 1:1 mixture of the diastereomers of the cis,mer-dihydride, (S)-4a and cis,mer-OC-6-44-C-[IrCl(H2)((S)-binap)(PPh3)] ((S)-4b).