Palladium-catalyzed highly regioselective and stereoselective decarboxylative arylation of unactivated olefins with aryl carboxylic acids

Palladium(II)-catalyzed highly regioselective and stereoselective decarboxylative arylation of unactivated olefins with aryl carboxylic acids has been developed. This method is applicable to a variety of unactivated olefins, including allylamides, long chain functionalized olefins and purely aliphatic olefins, leads to the formation of linear E-configured products in high yields. Both electron-rich and electron-deficient aryl carboxylic acids are suitable arylation reagents. It was found that the choice of solvent, catalyst precursor and oxidant had an important influence on reaction efficiency. As a co-solvent and ligand, DMSO is critical to catalysis. This chemistry expands the scope of decarboxylative arylation of olefins with aryl carboxylic acids, and provides a rapid access to useful linear arylation products of unactivated olefins.     

Palladium-catalyzed monoarylation of nitroalkanes.

A general protocol for the Pd-catalyzed-arylation of nitroalkanes is described. Substituted aryl bromides as well as aryl chlorides can be coupled efficiently with a variety of nitroalkanes under mild conditions to selectively yield the monoarylated products. This method tolerates a number of functional groups including ketones, esters, and olefins. Notably, the arylation of nitroalkanes can be effected chemoselectively over ketone and ester arylation.     

Conversion of Stilbene to trisubstituted Olefins

Determination of the stereochemistry of bromination-dehydrobromination of both cis and trans-stilbene has been achived. Coupling of the resulting vinyl bromides with alkyl or aryl groups have been done. The coupling products could serve as intermediates for the synthesis of biologically active tetrasubstituted olefins.     

Palladium-catalyzed Heck reaction of aryl chlorides under mild conditions promoted by organic ionic bases

An efficient Pd-catalyzed Heck reaction of aryl chlorides with olefins under mild conditions is described. High yields of products were achieved with n-Bu(4)N(+)OAc(-) as base. Significantly, the temperature of the Heck reaction of diverse nonactivated aryl chlorides can be lowered to 80 °C. The new reaction system can also tolerate a wider range of olefins.     

Diversity-oriented synthesis of tamoxifen-type tetrasubstituted olefins

A general synthetic scheme for tamoxifen-type tetrasubstituted olefins based on the novel Cu-catalyzed carbomagnesation across alkynyl(2-pyridyl)silane has been developed. A wide array of electronically and structurally diverse tetrasubstituted olefins can be prepared in a regiocontrolled, stereocontrolled, and diversity-oriented manner. Noteworthy features are that (i) the three aryl groups, which are believed to be important (essential) for anti-estrogenic activity, can be varied at will because they all stem from readily available aryl iodides, and (ii) any stereo- and regioisomers can, in principle, be prepared by simply changing the applying order of aryl iodides into the sequence.     

Reductive carbodiazenylation of nonactivated olefins via aryl diazonium salts

[Structure: see text] The reduction of aryl diazonium salts in the presence of nonactivated olefins provides rapid entry to carbodiazenylation products. The regioselective functionalization of double bonds is achieved in a one-pot process starting from aniline derivatives. Carboamination of olefins is possible via a two-step carbodiazenylation-hydrogenation sequence in which one aniline equivalent is recovered.     

Reactions of nitrosonium hexafluorophosphate with some olefinic compounds in acetonitrile: one step synthesis of 4H-5,6-dihydro-1,2-oxazines

Reactions of nitrosonium hexafluorophosphate or tetrafluoroborate with olefins having aryl groups at an olefinic carbon atom at low temperature in acetonitrile afforded 4H-5,6-dihydro-1,2-oxazines with two aryl groups at C-4 and C-6 in fair to good yields.     

Efficient imidazolium salts for palladium-catalyzed Mizoroki-Heck and Suzuki-Miyaura cross-coupling reactions

The system, Pd(OAc)2/imidazolium salts (L2), was found as an efficient catalyst in the Heck coupling reaction of olefins with aryl halides and Suzuki reactions of various aryl halides with aryl boronic acids under aerobic condition. This catalytic system demonstrates great tolerance to a wide range of groups on all substrates of aryl halides, alkenes and aryl boronic acids.     

Nickel-catalyzed coupling of activated alkenes with organic halides

Alkenenickel complexes catalyze the coupling of activated olefins with aryl or vinyl halides. Substitution or conjugate-addition products are obtained depending on the activating group in the alkene and on the nature of the organic halide.     

Selective arylation of 1,1-disubstituted olefins using a biphenyl-based phosphine in Heck coupling reactions

The biphenyl-based phosphine, 2-diphenylphosphino-2′-methylbiphenyl is an effective ligand for palladium-catalyzed terminal arylation of 1,1-disubstituted olefins with aryl bromides in DMF and K₂CO₃ as base. The yields of products are independent of the electronic properties of the aryl bromides, however, the nature of the olefin has a major effect.     

Nickel‐Catalyzed Mizoroki–Heck Reaction of Aryl Sulfonates and Chlorides with Electronically Unbiased Terminal Olefins: High Selectivity for Branched Products

Achieving high selectivity in the Heck reaction of electronically unbiased alkenes has been a longstanding challenge. Using a nickel‐catalyzed cationic Heck reaction, we were able to achieve excellent selectivity for branched products (≥19:1 in all cases) over a wide range of aryl electrophiles and aliphatic olefins. A bidentate ligand with a suitable bite angle and steric profile was key to obtaining high branched/linear selectivity, whereas the appropriate base suppressed alkene isomerization of the product. Although aryl triflates are traditionally used to access the cationic Heck pathway, we have shown that, by using triethylsilyl trifluoromethanesulfonate, we can effect a counterion exchange of the catalytic nickel complex, such that cheaper and more stable aryl chlorides, mesylates, tosylates, and sulfamates can be used to yield the same branched products with high selectivity.     

Regioselective Heck arylation of unsaturated alcohols by palladium catalysis in ionic liquid

In contrast to almost all of the known examples of Heck arylation of unsaturated alcohols, which yield predominately beta-arylated products, arylation under the Pd-DPPP catalysis in ionic liquid leads preferentially to aryl substitution at the alpha carbon, providing an easy pathway to this valuable class of olefins.     

Palladaphosphacyclobutenes as catalysts in Heck and Suzuki reactions

Heck reactions of aryl halides with various olefins and Suzuki reactions of aryl halides with phenylboronic acid catalyzed by palladaphosphacyclobutene have been investigated. The scope of the Heck reaction has been investigated in N,N‐dimethylacetamide at 140 °C using NaOAc as base. Using 0.1% molar ratio of palladaphosphacyclobuyenes, aryl bromides were converted into 1,2‐substitutedethene products in good to high yields through coupling with both vinylarenes and acrylates. Actived aryl chloride reacted with styrene to afford 1,2‐substitutedethene products in moderate yields. The scope of the Suzuki reaction has been conducted in toluene at 110 °C using Cs₂CO₃ as base. Using 0.1% molar ratio of palladaphosphacyclobutene, aryl bromides reacted with phenylboronic acid to afford diaryl derivatives in excellent yield. Copyright © 2008 John Wiley & Sons, Ltd.     

Monodentate phosphorus-coordinated palladium(Ⅱ)complexes as new catalyst for Mizoroki-Heck reaction of aryl halides with electron-deficient olefins

Four novel monodentate phosphorus-coordinated palladium(Ⅱ) complexes derived from 3,5-disubstituted-1H-1,2,4-diazaphospholes were developed as efficient catalyst for Mizoroki-Heck reactions of aryl halides with electron-deficient olefins. The role of these monophosphine ligands in catalysis was illustrated by control experiments using Pd salt and ligands as combined catalyst.     

IPy2BF4-mediated rearrangements of 1,2-difunctionalized compounds and olefins

Acetal derivatives are easily obtained from 1,2-difunctionalized compounds by a new reaction mediated by IPy2BF4 with a mechanism based on a 1,2-migration of aryl or alkyl groups. A new oxidative rearrangement reaction of olefins is also described. Moreover, when this metal-free protocol is applied to cyclic olefins, interesting ring-contraction reactions are observed. The new methodologies described here are a clean and efficient alternative to known strategies that make use of potentially toxic metallic complexes.     

N−H Imine as a Powerful Directing Group for Cobalt‐Catalyzed Olefin Hydroarylation

N‐alkyl and N‐aryl imines have been frequently used as directing groups in rhodium‐ and cobalt‐catalyzed hydroarylation reactions of olefins and alkynes. However, the scope of such hydroarylation reactions has been limited by the difficulty of preparation of sterically hindered imines by condensation, and also by the steric bulkiness of the imine group itself. Reported herein is that an N?H imine serves as an alternative and highly effective directing group for cobalt‐catalyzed hydroarylation of olefins, and unlocks many of the limitations associated with the previously employed N‐aryl imine directing group. The power of this minimal nitrogen directing group is manifested in a fourfold ortho alkylation of benzophenone imine, and it occurs rapidly at ambient temperature.     

Synthesis of All‐Carbon Quaternary Centers by Palladium‐Catalyzed Olefin Dicarbofunctionalization

The redox‐neutral dicarbofunctionalization of tri‐ and tetrasubstituted olefins to form a variety of (hetero)cyclic compounds under photoinduced palladium catalysis is described. This cascade reaction process was used to couple styrenes or acryl amides with a broad range of highly decorated olefins tethered to aryl or alkyl bromides (>50 examples). This procedure enables one or two contiguous all‐carbon quaternary centers to be formed in a single step. The products could be readily diversified and applied in the synthesis of a bioactive oxindole analogue.     

Copper-Catalyzed Enantioselective Difluoromethylation-Alkynylation of Olefins by Solving the Dilemma between Acidities and Reduction Potentials of Difluoromethylating Agents

Molecules containing a difluoromethyl group or a propargylic stereocenter are widely used in pharmaceuticals and agrochemicals, and 1,2-functionalization of olefins is an important method for introducing the two groups into molecules simultaneously. The construction of the propargylic stereocenter with terminal alkynes usually requires bases. However, difluoromethylating agents with high reduction potentials often decompose in the presence of bases because of their acidities, and those with low reduction potentials are stable but difficult to undergo the desired single electron transfer (SET) reduction. Using the linear relationship between reduction potential differences (ΔE) and Hammett substituent constants (σ) of difluoromethyl aryl sulfones, we solved the dilemma between acidities and reduction potentials of difluoromethylating agents. Herein, we report the first enantioselective difluoromethylation-alkynylation of olefins with difluoromethyl 4-chlorophenyl sulfone with high enantioselectivity (>90 % ee). We also extended this asymmetric fluoroalkylation-alkynylation reaction with other fluoroalkyl sulfones, which enabled efficient installation of trifluoromethyl, difluoroalkyl, difluorobenzyl, (benzenesulfonyl)-difluoromethyl and monofluoromethyl groups into products.     

Organic synthesis in the solid state via hydrogen-bond-driven self-assembly

This Perspective describes how chemists can control intermolecular [2 + 2] photodimerizations in the solid state using small molecules as linear templates. The templates assemble olefins into positions for the reaction via hydrogen-bond-driven self-assembly. We attach functional groups to the olefins that complement hydrogen bond donor and acceptor groups of the templates. The resulting cyclobutane-based products form stereospecifically, quantitatively, and in gram amounts. The templates are used to direct the formation of a [2.2]paracyclophane and ladderanes. The organic solid state is an exciting medium within which to control chemical reactivity since it is possible to synthesize, or construct, molecules that may be, otherwise, unobtainable from solution. The products form with a high degree of stereocontrol provided by a crystal lattice. The critical covalent-bond-forming process also occurs in a solvent-free environment. That molecules are virtually frozen in position in a solid also means that this methodology enables chemists to employ principles of molecular recognition and self-assembly to direct and conduct organic synthesis.     

Reactions of ethyl bromodifluoroacetate in the presence of copper powder

We have examined the reaction of ethyl bromodifluoroacetate (1) in the presence of copper powder as a procedure for the synthesis of compounds containing a CF₂ group. The complex formed in the above reaction reacted with vinyl or aryl iodides to give cross-coupling products, with Michael acceptors to give 1,4-addition products and with olefins to give radical addition products. The cross-coupling reaction was applied to the synthesis of 4,4-difluoro-α-tocopherol.