Spacer‐Modulated Differentiation Between Self‐Assembly and Folding Pathways for Bichromophoric Merocyanine Dyes

We have synthesized a large series of bis(merocyanine) dyes with varying spacer unit and investigated in detail their self‐organization behavior by concentration‐ as well as solvent‐dependent UV/Vis spectroscopy. Our in‐depth studies have shown that the self‐organization of the present bis(merocyanine) dyes is subtly influenced by the nature of the spacer unit. The utilization of rigid spacers results in the formation of self‐associated bimolecular complexes with high binding strength, while flexible spacers drive the respective bichromophoric dyes to intramolecular folding. Our thorough investigations on the impact of alkyl spacer chain length on the folding tendency of the present series of bis(merocyanine) dyes revealed a biphasic behavior, that is, a steep increase of the folding tendency for the dyes containing C4 to C7 chains and then a gentle decrease for dyes with longer alkyl spacer chains as evidenced by free energy (ΔG) values for the folding of these dyes. Furthermore, analyses of aggregates’ optical properties based on exciton theory as well as quantum chemical calculations suggest a bimolecular aggregate structure for the dye possessing a rigid spacer and a rotationally twisted pleated structure for the bis(merocyanine) dyes having spacer units with less than seven carbon atoms, while the application of longer alkyl chain linkers (≥C7) provides enough flexibility to orient the chromophores in electrostatically most favored antiparallel fashion.     

菁染料和份菁染料的合成及其溶液的光稳定性研究

利用UV-Vis吸收光谱仪和光化学反应器,研究了菁染料和份菁染料的光降解动力学.研究结果表明,染料在乙腈溶液中的光褪色反应遵循假一级或零级动力学衰减.与相应的份菁染料相比,携带正电荷的菁染料具有相对较好的光稳定性.     

菁染料和份菁染料薄膜的光稳定性研究

利用UV-Vis吸收光谱仪和光化学反应器研究了菁染料和份菁染料薄膜的光降解动力学.与相应的份菁染料相比,携带正电荷的菁染料薄膜具有相对较好的光稳定性.运用量子化学中的SCF-MO-PM3方法,全优化计算了这些染料的分子几何构型和电子结构,并解释了染料的光稳定性与其分子结构的关系.     

菁染料和份菁染料溶液的光降解机理的研究

利用UV-Vis吸收光谱仪和光化学反应器,研究了菁染料和份菁染料溶液的光降解动力学,认为染料在乙腈溶液中的光褪色反应服从假一级或零级动力学.利用GC/MS光谱仪检测了染料的光降解产物.与相应的份菁染料相比,携带正电荷的菁染料具有相对较好的光稳定性.研究结果表明,菁染料光降解反应的中间体可能是染料的半氧化态Dye⁺,并利用纳秒级闪光光解技术研究了Dye⁺的瞬态吸收光谱.     

The Helix to Super‐Helix Transition in the Self‐Assembly of π‐Systems: Superseding of Molecular Chirality at Hierarchical Level

Higher‐order super‐helical structures derived from biological molecules are known to evolve through opposite coiling of the initial helical fibers, as seen in collagen protein. A similar phenomenon is observed in a π‐system self‐assembly of chiral oligo(phenyleneethylene) derivatives (S )‐ 1 and (R )‐ 1 that explains the unequal formation of both left‐ and right‐handed helices from molecule having a specific chiral center. Concentration‐ and temperature‐dependent circular dichroism (CD) and UV/Vis spectroscopic studies revealed that the initial formation of helical aggregates is in accordance with the molecular chirality. At the next level of hierarchical self‐assembly, coiling of the fibers occurs with opposite handedness, thereby superseding the command of the molecular chirality. This was confirmed by solvent‐dependent decoiling of super‐helical structures and concentration‐dependent morphological analysis.     

Control of the Optical Properties of a Star Copolymer with a Hyperbranched Conjugated Polymer Core and Poly(ethylene glycol) Arms by Self‐Assembly

A self‐assembly approach to tuning the optical properties of a star copolymer is reported herein. The star copolymer HCP‐star‐PEG with a hyperbranched conjugated polymer (HCP) core and many linear poly(ethylene glycol) (PEG) arms has been prepared successfully. The HCP core was synthesized by Wittig coupling of N‐(n‐hexyl)‐3,6‐diformylcarbazole and 1,3,5‐bis[(triphenylphosphonio)methyl]benzene tribromide. Subsequently, the linear PEG arms were grafted onto the HCP core by acylhydrazone connection. It was found that the optical properties of HCP‐star‐PEG in chloroform solution changed on addition of acid. Both ¹H NMR and UV/Vis spectroscopic investigations confirmed that the variation of the optical properties was related to the complexation of the acid and the imine bond in the acylhydrazone group. HCP‐star‐PEG self‐assembled into core–shell micelles in the mixed solvent of chloroform and acetonitrile, which affected the protonation of the imine bond. Therefore the optical properties of HCP‐star‐PEG can be readily controlled by self‐assembly.     

Design and Sensing Properties of a Self‐Assembled Supramolecular Oligomer

Supramolecular polymers are a class of macromolecules stabilized by weak non‐covalent interactions. These self‐assembled aggregates typically undergo stimuli‐induced reversible assembly and disassembly. They thus hold great promise as so‐called functional materials. In this work, we present the design, synthesis, and responsive behavior of a short supramolecular oligomeric system based on two hetero‐complementary subunits. These “monomers” consist of a tetrathiafulvalene‐functionalized calix[4]pyrrole (TTF‐C[4]P) and a glycol diester‐linked bis‐2,5,7‐trinitrodicyanomethylenefluorene‐4‐carboxylate (TNDCF), respectively. We show that when mixed in organic solvents, such as CHCl₃, CH₂ClCH₂Cl, and methylcyclohexane, supramolecular aggregation takes place to produce short oligomers stabilized by hydrogen bonding and donor–acceptor charge‐transfer (CT) interactions. The self‐associated materials were characterized by ¹H NMR and UV/Vis/NIR absorption spectroscopy, as well as by concentration‐ and temperature‐dependent absorption spectroscopy and dynamic light scattering (DLS) analyses of both the monomeric and oligomerized species. The self‐associated system produced from TTF‐C[4]P and TNDCF exhibits a concentration‐dependent aggregation behavior typical of supramolecular polymers. Further support for the proposed self‐assembly came from theoretical calculations. The fluorescence emitting properties of TNDCF are quenched under conditions that promote the formation of supramolecular aggregates containing TTF‐C[4]P and TNDCF. This quenching effect has been utilized as a probe for the detection of substrates in the form of anions (i.e., chloride) and nitroaromatic explosives (i.e., 1,3,5‐trinitrobenzene). Specifically, the addition of these substrates to mixtures of TTF‐C[4]P and TNDCF produced a fluorescence “turn‐on” response.     

Spiropyran‐Conjugated Pluronic as a Dual Responsive Colorimetric Detector

Novel spiropyran‐conjugated Pluronic [polyethylene oxide (PEO)‐b‐polypropylene oxide (PPO)‐b‐polyethylene oxide (PEO)] micelles are developed as a new colorimetric detector showing photo‐ or thermo‐switchable behavior. Facile conjugation of spiropyran to Pluronic was confirmed by ¹H NMR, UV–Vis, and Fluorescence spectroscopy. A switchable photoluminescence is found depending on the irradiation with either UV or visible light, and temperature resulting from structural isomerization of spiropyran between spiropyran (SP) and merocyanine (MC) form. Cytotoxicity of the spiropyran‐conjugated Pluronic (SP‐PL) was evaluated following an MTT assay, whereas photo responsiveness of spiropyran within the micelles was determined by confocal laser scanning microscopy.     

Hamilton Receptor‐Mediated Self‐Assembly of Orthogonally Functionalized Au and TiO2 Nanoparticles

A new prototype of reversible self‐assembly between functionalized gold and titanium dioxide nanoparticles (NPs) utilizing hydrogen bonding interactions was developed and established. The gold nanoparticles were functionalized with a Hamilton‐receptor functionality bearing a thiol moiety as anchoring group. The titanium dioxide nanoparticles were modified with cyanurate derivatives which contained phosphonic acids as anchoring groups. The host–guest type interaction between two functionalized nanoparticles yielded a highly integrated nanoparticle system in chloroform. Moreover, by presenting a competing ligand in an exchange reaction, the product of self‐assembly can be segregated into the individual soluble components of functionalized nanoparticles. The self‐assembly and the exchange reaction were followed and monitored in detail by UV/Vis spectroscopy. The structure of the self‐assembly product was investigated using scanning electron microscopy (SEM) and small‐angle X‐ray scattering (SAXS).     

Perylene Bisimide Dimer Aggregates: Fundamental Insights into Self‐Assembly by NMR and UV/Vis Spectroscopy

A novel perylene bisimide (PBI) dye bearing one solubilizing dialkoxybenzyl and one bulky 2,5‐di‐tert‐butylphenyl substituent was synthesized and its aggregation behavior was analyzed by NMR and UV/Vis spectroscopy in various chloroform/methylcyclohexane (MCH) solvent mixtures. In the presence of no less than 10 vol % chloroform, exclusive self‐assembly of this PBI dye into π‐stacked dimers was unambiguously confirmed by means of both concentration‐dependent ¹H NMR and UV/Vis spectroscopic experiments. Based on ROESY NMR, a well‐defined π‐stacked dimer structure was determined and further corroborated by molecular modeling studies. By varying the solvent composition of chloroform and MCH, the solvent effects on the Gibbs free energy of PBI dimerization were elucidated and showed a pronounced nonlinearity between lower and higher MCH contents. This observation could be related to a further growth process of dimers into larger aggregates that occurs in the absence of chloroform, which is required to solvate the aromatic π surfaces. With the help of a single‐crystal structure analysis for a related PBI dye, a structural model could be derived for the extended aggregates that are still composed of defined π–π‐stacked PBI dimer entities.     

Stereodynamics of Metal–Ligand Assembly: What Lies Beneath the “Simple” Spectral Signatures of C2‐Symmetric Chiral Chelates

A series of C₂‐symmetric chiral tetra‐dentate ligands were prepared by using [4,5]‐ or [5,6]‐pinene‐fused 2,2′‐bipyridyl units that are supported across a rigid arylene–ethynylene backbone. These conformationally pre‐organised chelates support stable 1:1 metal complexes, which were fully characterised by UV/Vis, fluorescence, circular dichroism (CD), and ¹H NMR spectroscopy. A careful inspection of the exciton‐coupled circular dichroism (ECCD) and ¹H NMR spectra of the reaction mixture in solution, however, revealed the evolution and decay of intermediate species en route to the final 1:1 metal–ligand adduct. Consistent with this model, mass spectrometric analysis revealed the presence of multiple metal complexes in solution at high ligand‐to‐metal ratios, which were essentially unobservable by UV/Vis or fluorescence spectroscopic techniques. Comparative studies with a bi‐dentate model system have fully established the functional role of the π‐conjugated ligand skeleton that dramatically enhances the thermodynamic stability of the 1:1 complex. In addition to serving as a useful spectroscopic handle to understand the otherwise “invisible” solution dynamics of this metal–ligand assembly process, temperature‐dependent changes in the proton resonances associated with the chiral ligands allowed us to determine the activation barrier (ΔG^≠) for the chirality switching between the thermodynamically stable but kinetically labile (P)‐ and (M)‐stereoisomers.     

Reversible Self‐Assembly of Carboxylated Peptide‐Functionalized Gold Nanoparticles Driven by Metal‐Ion Coordination

Carboxylated peptide‐functionalized gold nanoparticles (peptide‐GNPs) self‐assemble into two‐ and three‐dimensional nanostructures in the presence of various heavy metal ions (i.e. Pb²⁺, Cd²⁺, Cu²⁺, and Zn²⁺) in aqueous solution. The assembly process is monitored by following the changes in the surface plasmon resonance (SPR) band of gold nanoparticles in a UV/Vis spectrophotometer, which shows the development of a new SPR band in the higher‐wavelength region. The extent of assembly is dependent on the amount of metal ions present in the medium and also the time of assembly. TEM analysis clearly shows formation of two‐ and three‐dimensional nanostructures. The assembly process is completely reversible by addition of alkaline ethylenediaminetetraacetic acid (EDTA) solution. The driving force for the assembly of peptide‐GNPs is mainly metal ion/carboxylate coordination. The color and spectral changes due to this assembly can be used for detection of these heavy‐metal ions in solution.     

Synthesis of phenanthroline‐terminated polymers and their Fe(II)‐complexes

Well‐defined mono‐ and bifunctional, phenanthroline‐terminated poly(ethylene glycol) and polyisobutylene capable of polymer network formation were synthesized. The starting materials mono‐ and bi‐phenanthroline‐ (phen) terminated poly(ethylene glycols) (mPEG‐phen, phen‐PEG‐phen) and polyisobutylenes (PIB‐phen, phen‐PIB‐phen) were prepared by the Williamson synthesis and characterized by means of ¹H NMR and MALDI‐TOF mass spectrometry. According to UV–Vis spectrophotometry and ESI‐TOF mass spectrometry, the phenanthroline‐terminated polymers underwent quantitative complex formation with ferrous ions in solution. The aqueous solution of mPEG‐phen shows self‐assembly behavior. Important parameters, such as critical micelle concentration and hydrodynamic radius of the aggregates were also determined. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2709–2715, 2010     

Synthesis, optical properties, and LFER analysis of solvent-dependent binding constants of Hamilton-receptor-connected merocyanine chromophores

A merocyanine dye equipped with a Hamilton-receptor unit has been synthesized that enables strong noncovalent binding of other merocyanine dyes bearing barbituric acid acceptor groups by six hydrogen bonds. NMR and UV/vis titration experiments in toluene, chloroform, dichloromethane, dioxane, and THF provide evidence for the formation of 1:1 complexes even in the dipolar solvents. An enhanced binding strength is observed for the more dipolar merocyanine dyes in the head-to-tail assembly structure with binding constants up to >10 (8) M (-1) in toluene. In the present bimolecular complexes two merocyanine chromophores are assembled in a head-to-tail fashion that affords increased dipole moments as demanded for efficient electric field induced poling processes in nonlinear optical and photorefractive polymeric hosts. The solvent dependency of the binding constants for various barbituric acid dye-Hamilton receptor complexes as well as a perylene imide-melamine complex reveals linear free energy relationships (LFER) that allow for an estimation of binding constants larger than 10 (12) M (-1) for Hamilton receptor organized head-to-tail merocyanine bimolecular complexes in aliphatic solvents. It is suggested that such LFER are valuable tools for the estimation of binding constants in solvents where experimental binding constants cannot be determined because of solubility or spectroscopic problems.     

Control of H‐ and J‐Type π Stacking by Peripheral Alkyl Chains and Self‐Sorting Phenomena in Perylene Bisimide Homo‐ and Heteroaggregates

The synthesis, self‐assembly, and gelation ability of a series of organogelators based on perylene bisimide (PBI) dyes containing amide groups at imide positions are reported. The synergetic effect of intermolecular hydrogen bonding among the amide functionalities and π–π stacking between the PBI units directs the formation of the self‐assembled structure in solution, which beyond a certain concentration results in gelation. Effects of different peripheral alkyl substituents on the self‐assembly were studied by solvent‐ and temperature‐dependent UV‐visible and circular dichroism (CD) spectroscopy. PBI derivatives containing linear alkyl side chains in the periphery formed H‐type π stacks and red gels, whereas by introducing branched alkyl chains the formation of J‐type π stacks and green gels could be achieved. Sterically demanding substituents, in particular, the 2‐ethylhexyl group completely suppressed the π stacking. Coaggregation studies with H‐ and J‐aggregating chromophores revealed the formation of solely H‐type π stacks containing both precursor molecules at a lower mole fraction of J‐aggregating chromophore. Beyond a critical composition of the two chromophores, mixed H‐aggregate and J‐aggregate were formed simultaneously, which points to a self‐sorting process. The versatility of the gelators is strongly dependent on the length and nature of the peripheral alkyl substituents. CD spectroscopic studies revealed a preferential helicity of the aggregates of PBI building blocks bearing chiral side chains. Even for achiral PBI derivatives, the utilization of chiral solvents such as (R)‐ or (S)‐limonene was effective in preferential population of one‐handed helical fibers. AFM studies revealed the formation of helical fibers from all the present PBI gelators, irrespective of the presence of chiral or achiral side chains. Furthermore, vortex flow was found to be effective in macroscopic orientation of the aggregates as evidenced from the origin of CD signals from aggregates of achiral PBI molecules.     

Self‐Assembly of Carboxylic Acid Appended Naphthalene Diimide Derivatives with Tunable Luminescent Color and Electrical Conductivity

Self‐assembly of a series of carboxylic acid‐functionalized naphthalene diimide (NDI) chromophores with a varying number (n=1–4) of methylene spacers between the NDI ring and the carboxylic acid group has been studied. The derivatives show pronounced aggregation due to the synergistic effects of H‐bonding between the carboxylic acid groups in a syn–syn catemer motif and π stacking between the NDI chromophores. Solvent‐dependent UV/Vis studies reveal the existence of monomeric dye molecules in a “good” solvent such as chloroform and self‐assembly in “bad” solvents such as methylcyclohexane. The propensity of self‐assembly is comparable for all samples. Temperature‐dependent spectroscopic studies show high thermal stability of the H‐bonding‐mediated self‐assembled structures. In the presence of a protic solvent such as MeOH, self‐assembly can be suppressed, suggesting a decisive role of H‐bonding, whereas π stacking is more a consequence of than a cause for self‐assembly. Syn–syn catemer‐type H‐bonding is supported by powder XRD studies and the results corroborate well with DFT calculations. The morphology as determined by AFM is found to be dependent on the value of n; with increasing n, the morphology gradually shifts from 2D nanosheets to 1D nanofibers. Emission spectra show sharp emission bands with relatively small Stokes shifts. In addition, a rather broad emission band is observed at longer wavelengths because of the in situ formation of excimer‐type species. Due to such a heterogeneous nature, the emission spectrum spans almost the entire red–green–blue region. Depending on the value of n, the ratio of intensities of the two emission bands is changed, which results in a tunable luminescent color. Furthermore, in the case of n=1 and 3, almost pure white light emission is observed. Time‐resolved photoluminescence spectra show a very short lifetime (a few picoseconds) of monomeric dye molecules and biexponential decays with longer lifetimes (on the order of nanoseconds) for aggregated species. Current–voltage measurements show electrical conductivity in the range of 10^?4 S cm^?1 for the aggregated chromophores, which is four orders of magnitude higher than the value for a structurally similar NDI control molecule lacking the H‐bonding functionality.     

A Theoretical Study of the UV/Visible Absorption and Emission Solvatochromic Properties of Solvent‐Sensitive Dyes

Using the density‐functional vertical self‐consistent reaction field (VSCRF) solvation model, incorporated with the conductor‐like screening model (COSMO) and the self‐consistent reaction field (SCRF) methods, we have studied the solvatochromic shifts of both the absorption and emission bands of four solvent‐sensitive dyes in different solutions. The dye molecules studied here are: S‐TBA merocyanine, Abdel‐Halim's merocyanine, the rigidified aminocoumarin C153, and Nile red. These dyes were selected because they exemplify different structural features likely to impact the solvent‐sensitive fluorescence of “push‐pull”, or merocyanine, fluorophores. All trends of the blue or red shifts were correctly predicted, comparing with the experimental observations. Explicit H‐bonding interactions were also considered in several protic solutions like H₂O, methanol and ethanol, showing that including explicit H‐bonding solvent molecule(s) in the calculations is important to obtain the correct order of the excitation and emission energies. The geometries, electronic structures, dipole moments, and intra‐ and intermolecular charge transfers of the dyes in different solvents are also discussed.     

Bis(merocyanine) Homo-Folda-Dimers: Evaluation of Electronic and Spectral Changes in Well-Defined Dye Aggregate Geometries

A series of three bis(merocyanine) dyes comprising chromophores of different conjugation lengths has been synthesized and the intramolecular aggregation process was investigated by UV/Vis absorption spectroscopy. The spectral changes observed upon variation of the solvent polarity reveal a folding process resulting in a cofacial π-stack of two chromophores with a decrease of the aggregation tendency with increasing chromophore length and solvent polarity. Solvent-dependent UV/Vis studies of the monomeric reference dyes show a significant increase of the polyene-like character for dyes with longer polymethine chains in nonpolar solvents, which is reversed upon aggregation due to the polarizability effect of the adjacent chromophore within the dye stack. The pronounced hypsochromic shift of the absorption band observed upon aggregation indicates strong coupling of the dyes’ transition dipole moments, which was confirmed by quantum-chemical analysis.     

Enantiomerically Pure [M6L12] or [M12L24] Polyhedra from Flexible Bis(Pyridine) Ligands

Coordination‐driven self‐assembly is one of the most powerful strategies to prepare nanometer‐sized discrete (supra)molecular assemblies. Herein, we report on the use of two constitutionally isomeric BINOL‐based bis(pyridine) ligands for this purpose. Upon coordination to Pd^II ions these self‐assemble into enantiomerically pure endo‐ and exo‐functionalized hexa‐ and dodecanuclear metallosupramolecular spheres with a chiral skeleton depending on the substitution pattern of the BINOL core. These aggregates were characterized by NMR, MS, DLS, TEM, and EELS as well as ECD. Furthermore, experimental ECD data could be compared to those obtained from theoretical simulations using a simplified Tamm–Dancoff approximation to time‐dependent DFT to rationalize the extraordinary high molar circular dichroisms. Despite the rotational freedom around the central aryl–aryl bond of these ligands, the self‐assembly process happens completely selective in a “narcissistic” self‐recognition manner.     

Ultrasound‐Driven Secondary Self‐Assembly of Amphiphilic β‐Cyclodextrin Dimers

The controlled secondary self‐assembly of amphiphilic molecules in solution is theoretically and practically significant in amphiphilic molecular applications. An amphiphilic β‐cyclodextrin (β‐CD) dimer, namely LA‐(CD)₂, has been synthesized, wherein one lithocholic acid (LA) unit is hydrophobic and two β‐CD units are hydrophilic. In an aqueous solution at room temperature, LA‐(CD)₂ self‐assembles into spherical micelles without ultrasonication. The primary micelles dissociates and then secondarily form self‐assemblies with branched structures under ultrasonication. The branched aggregates revert to primary micelles at high temperature. The ultrasound‐driven secondary self‐assembly is confirmed by transmission electron microscopy, dynamic light scattering, ¹H NMR spectroscopy, and Cu²⁺‐responsive experiments. Furthermore, 2D NOESY NMR and UV/Vis spectroscopy results indicate that the formation of the primary micelles is driven by hydrophilic–hydrophobic interactions, whereas host–guest interactions promote the formation of the secondary assemblies. Additionally, ultrasonication is shown to be able to effectively destroy the primary hydrophilic–hydrophobic balances while enhancing the host–guest interaction between the LA and β‐CD moieties at room temperature.