Rapid Colorimetric Identification and Targeted Photothermal Lysis of Salmonella Bacteria by Using Bioconjugated Oval‐Shaped Gold Nanoparticles

Salmonella bacteria are the major cause for the infection of 16 million people worldwide with typhoid fever each year. Antibiotic‐resistant Salmonella strains have been isolated from various food products. As a result, the development of ultrasensitive sensing technology for detection and new approaches for the treatment of infectious bacterial pathogens that do not rely on traditional therapeutic regimes is very urgent for public health, food safety, and the world economy. Driven by this need, we report herein a nanotechnology‐driven approach that uses antibody‐conjugated oval‐shaped gold nanoparticles to selectively target and destroy pathogenic bacteria. Our experiments have shown the use of a simple colorimetric assay, with an anti‐salmonella antibody conjugated to oval‐shaped gold nanoparticles, for the label‐free detection of S. typhimurium with an excellent detection limit (10⁴ bacteria per mL) and high selectivity over other pathogens. When bacteria conjugated to oval‐shaped gold nanoparticles were exposed to near‐infrared radiation, a highly significant reduction in bacterial cell viability was observed due to photothermal lysis. Ideally, this nanotechnology‐based assay would have enormous potential for rapid, on‐site pathogen detection to avoid the distribution of contaminated foods.     

Magnetic Nanohybrids Loaded with Bimetal Core–Shell–Shell Nanorods for Bacteria Capture,Separation, and Near‐Infrared Photothermal Treatment

A novel antimicrobial nanohybrid based on near‐infrared (NIR) photothermal conversion is designed for bacteria capture, separation, and sterilization (killing). Positively charged magnetic reduced graphene oxide with modification by polyethylenimine (rGO–Fe₃O₄–PEI) is prepared and then loaded with core–shell–shell Au–Ag–Au nanorods to construct the nanohybrid rGO–Fe₃O₄–Au–Ag–Au. NIR laser irradiation melts the outer Au shell and exposes the inner Ag shell, which facilitates controlled release of the silver shell. The nanohybrids combine physical photothermal sterilization as a result of the outer Au shell with the antibacterial effect of the inner Ag shell. In addition, the nanohybrid exhibits high heat conductivity because of the rGO and rapid magnetic‐separation capability that is attributable to Fe₃O₄. The nanohybrid provides a significant improvement of bactericidal efficiency with respect to bare Au–Ag–Au nanorods and facilitates the isolation of bacteria from sample matrixes. A concentration of 25 μg mL^?1 of nanohybrid causes 100 % capture and separation of Escherichia coli O157:H7 (1×10⁸ cfu mL^?1) from an aqueous medium in 10 min. In addition, it causes a 22 °C temperature rise for the surrounding solution under NIR irradiation (785 nm, 50 mW cm^?2) for 10 min. With magnetic separation, 30 μg mL^?1 of nanohybrid results in a 100 % killing rate for E. coli O157:H7 cells. The facile bacteria separation and photothermal sterilization is potentially feasible for environmental and/or clinical treatment.     

“Two‐Step” Raman Imaging Technique To Guide Chemo‐Photothermal Cancer Therapy

Graphene oxide‐wrapped gold nanorods (GO@AuNRs) offer efficient drug delivery as well as NIR laser photothermal therapy (PTT) in vitro and in vivo. However, no real‐time observation of drug release has been reported to better understand the synergy of chemotherapy and PTT. Herein, surface‐enhance Raman spectroscopy (SERS) is employed to guide chemo‐photothermal cancer therapy by a two‐step mechanism. In the presence of GO as an internal standard, SERS signals of DOX (doxorubicin) loaded onto GO@AuNRs are found to be pH‐responsive. Both DOX and GO show strong SERS signals before the DOX@GO@AuNRs are endocytic. However, when the DOX@GO@AuNRs enter acidic microenvironments such as endosomes and/or lysosomes, the DOX signals start decreasing while the GO signals remain the same. This plasmonic antenna could be used to identify the appropriate time to apply the PTT laser during chemo‐photothermal therapy.     

Self-Assembled Plasmonic Vesicles of SERS-Encoded Amphiphilic Gold Nanoparticles for Cancer Cell Targeting and Traceable Intracellular Drug Delivery

We report the development of bioconjugated plasmonic vesicles assembled from SERS-encoded amphiphilic gold nanoparticles for cancer-targeted drug delivery. This new type of plasmonic assemblies with a hollow cavity can play multifunctional roles as delivery carriers for anticancer drugs and SERS-active plasmonic imaging probes to specifically label targeted cancer cells and monitor intracellular drug delivery. We have shown that the pH-responsive disassembly of the plasmonic vesicle, stimulated by the hydrophobic-to-hydrophilic transition of the hydrophobic brushes in acidic intracellular compartments, allows for triggered intracellular drug release. Because self-assembled plasmonic vesicles exhibit significantly different plasmonic properties and greatly enhanced SERS intensity in comparison with single gold nanoparticles due to strong interparticle plasmonic coupling, disassembly of the vesicles in endocytic compartments leads to dramatic changes in scattering properties and SERS signals, which can serve as independent feedback mechanisms to signal cargo release from the vesicles. The unique structural and optical properties of the plasmonic vesicle have made it a promising platform for targeted combination therapy and theranostic applications by taking advantage of recent advances in gold nanostructure based in vivo bioimaging and photothermal therapy and their loading capacity for both hydrophilic (nucleic acids and proteins) and hydrophobic (small molecules) therapeutic agents.     

Rolling‐Circle Amplification Detection of Thrombin Using Surface‐Enhanced Raman Spectroscopy with Core‐Shell Nanoparticle Probe

An ultrasensitive surface‐enhanced Raman spectroscopy (SERS) sensor based on rolling‐circle amplification (RCA)‐increased “hot‐spot” was developed for the detection of thrombin. The sensor contains a SERS gold nanoparticle@Raman label@SiO₂ core‐shell nanoparticle probe in which the Raman reporter molecules are sandwiched between a gold nanoparticle core and a thin silica shell by a layer‐by‐layer method. Thrombin aptamer sequences were immobilized onto the magnetic beads (MBs) through hybridization with their complementary strand. In the presence of thrombin, the aptamer sequence was released; this allowed the remaining single‐stranded DNA (ssDNA) to act as primer and initiate in situ RCA reaction to produce long ssDNAs. Then, a large number of SERS probes were attached on the long ssDNA templates, causing thousands of SERS probes to be involved in each biomolecular recognition event. This SERS method achieved the detection of thrombin in the range from 1.0×10^?12 to 1.0×10^?8 M and a detection limit of 4.2×10^?13 M , and showed good performance in real serum samples.     

Plasmonic Hotspots in Air: An Omnidirectional Three‐Dimensional Platform for Stand‐Off In‐Air SERS Sensing of Airborne Species

Molecular‐level airborne sensing is critical for early prevention of disasters, diseases, and terrorism. Currently, most 2D surface‐enhanced Raman spectroscopy (SERS) substrates used for air sensing have only one functional surface and exhibit poor SERS‐active depth. “Aerosolized plasmonic colloidosomes” (APCs) are introduced as airborne plasmonic hotspots for direct in‐air SERS measurements. APCs function as a macroscale 3D and omnidirectional plasmonic cloud that receives laser irradiation and emits signals in all directions. Importantly, it brings about an effective plasmonic hotspot in a length scale of approximately 2.3 cm, which affords 100‐fold higher tolerance to laser misalignment along the z‐axis compared with 2D SERS substrates. APCs exhibit an extraordinary omnidirectional property and demonstrate consistent SERS performance that is independent of the laser and analyte introductory pathway. Furthermore, the first in‐air SERS detection is demonstrated in stand‐off conditions at a distance of 200 cm, highlighting the applicability of 3D omnidirectional plasmonic clouds for remote airborne sensing in threatening or inaccessible areas.     

Magneto‐Plasmonic Janus Vesicles for Magnetic Field‐Enhanced Photoacoustic and Magnetic Resonance Imaging of Tumors

Magneto‐plasmonic Janus vesicles (JVs) integrated with gold nanoparticles (AuNPs) and magnetic NPs (MNPs) were prepared asymmetrically in the membrane for in vivo cancer imaging. The hybrid JVs were produced by coassembling a mixture of hydrophobic MNPs, free amphiphilic block copolymers (BCPs), and AuNPs tethered with amphiphilic BCPs. Depending on the size and content of NPs, the JVs acquired spherical or hemispherical shapes. Among them, hemispherical JVs containing 50 nm AuNPs and 15 nm MNPs showed a strong absorption in the near‐infrared (NIR) window and enhanced the transverse relaxation (T₂) contrast effect, as a result of the ordering and dense packing of AuNPs and MNPs in the membrane. The magneto‐plasmonic JVs were used as drug delivery vehicles, from which the release of a payload can be triggered by NIR light and the release rate can be modulated by a magnetic field. Moreover, the JVs were applied as imaging agents for in vivo bimodal photoacoustic (PA) and magnetic resonance (MR) imaging of tumors by intravenous injection. With an external magnetic field, the accumulation of the JVs in tumors was significantly increased, leading to a signal enhancement of approximately 2–3 times in the PA and MR imaging, compared with control groups without a magnetic field.     

Biodegradable Gold Nanovesicles with an Ultrastrong Plasmonic Coupling Effect for Photoacoustic Imaging and Photothermal Therapy

The hierarchical assembly of gold nanoparticles (GNPs) allows the localized surface plasmon resonance peaks to be engineered to the near‐infrared (NIR) region for enhanced photothermal therapy (PTT). Herein we report a novel theranostic platform based on biodegradable plasmonic gold nanovesicles for photoacoustic (PA) imaging and PTT. The disulfide bond at the terminus of a PEG‐b‐PCL block‐copolymer graft enables dense packing of GNPs during the assembly process and induces ultrastrong plasmonic coupling between adjacent GNPs. The strong NIR absorption induced by plasmon coupling and very high photothermal conversion efficiency (η=37 %) enable simultaneous thermal/PA imaging and enhanced PTT efficacy with improved clearance of the dissociated particles after the completion of PTT. The assembly of various nanocrystals with tailored optical, magnetic, and electronic properties into vesicle architectures opens new possibilities for the construction of multifunctional biodegradable platforms for biomedical applications.     

Polystyrene‐Core–Silica‐Shell Hybrid Particles Containing Gold and Magnetic Nanoparticles

Polystyrene‐core–silica‐shell hybrid particles were synthesized by combining the self‐assembly of nanoparticles and the polymer with a silica coating strategy. The core–shell hybrid particles are composed of gold‐nanoparticle‐decorated polystyrene (PS‐AuNP) colloids as the core and silica particles as the shell. PS‐AuNP colloids were generated by the self‐assembly of the PS‐grafted AuNPs. The silica coating improved the thermal stability and dispersibility of the AuNPs. By removing the “free” PS of the core, hollow particles with a hydrophobic cage having a AuNP corona and an inert silica shell were obtained. Also, Fe₃O₄ nanoparticles were encapsulated in the core, which resulted in magnetic core–shell hybrid particles by the same strategy. These particles have potential applications in biomolecular separation and high‐temperature catalysis and as nanoreactors.     

Aqueous Stable Gold Nanostar/ZIF‐8 Nanocomposites for Light‐Triggered Release of Active Cargo Inside Living Cells

A plasmonic core–shell gold nanostar/zeolitic‐imidazolate‐framework‐8 (ZIF‐8) nanocomposite was developed for the thermoplasmonic‐driven release of encapsulated active molecules inside living cells. The nanocomposites were loaded, as a proof of concept, with bisbenzimide molecules as functional cargo and wrapped with an amphiphilic polymer that prevents ZIF‐8 degradation and bisbenzimide leaking in aqueous media or inside living cells. The demonstrated molecule‐release mechanism relies on the use of near‐IR light coupled to the plasmonic absorption of the core gold nanostars, which creates local temperature gradients and thus, bisbenzimide thermodiffusion. Confocal microscopy and surface‐enhanced Raman spectroscopy (SERS) were used to demonstrate bisbenzimide loading/leaking and near‐IR‐triggered cargo release inside cells, thereby leading to DNA staining.     

Enantiomeric Discrimination by Surface‐Enhanced Raman Scattering–Chiral Anisotropy of Chiral Nanostructured Gold Films

A surface‐enhanced Raman scattering‐chiral anisotropy (SERS‐ChA) effect is reported that combines chiral discrimination and surface Raman scattering enhancement on chiral nanostructured Au films (CNAFs) equipped in the normal Raman scattering Spectrometer. The CNAFs provided remarkably higher enhancement factors of Raman scattering (EFs) for particular enantiomers, and the SERS intensity was proportional to the enantiomeric excesses (ee) values. Except for molecules with mesomeric species, all of the tested enantiomers exhibited high SERS‐ChA asymmetry factors (g), ranging between 1.34 and 1.99 regardless of polarities, sizes, chromophores, concentrations and ee. The effect might be attributed to selective resonance coupling between the induced electric and magnetic dipoles associated with enantiomers and chiral plasmonic modes of CNAFs.     

多功能金属石墨纳米囊的生物医学应用进展

多功能金属石墨纳米囊由于其良好的稳定性和独特的理化性质, 在生物医学领域受到了广泛关注. 利用石墨烯外壳独特的拉曼散射特征峰作为拉曼标签或者内标, 结合等离子体纳米核优异的表面增强拉曼散射(SERS)和双光子发光(TPL)性能, 可实现SERS生物分析以及肿瘤细胞或组织的Raman/TPL双模成像. 利用表面积大的石墨烯外壳作为药物负载平台, 结合等离子体纳米核的近红外光吸收能力, 可实现光介导的病原菌杀灭以及肿瘤细胞或实体瘤的热疗与化疗的协同治疗. 此外, 利用石墨烯外壳优异的荧光猝灭性能, 还实现了生物分子的荧光检测; 利用磁性纳米核独特的磁学性能, 可实现生物样品的分离和富集、 细菌的原位磁共振成像检测以及磁靶向胃部口服药物的递送. 本综述首先介绍了金属石墨纳米囊的制备、 分类和性质, 然后概述了它们在生物检测、 生物成像和治疗3个方面的应用进展, 并进一步总结了它们的发展现状包括生物毒性和生物医学应用的优缺点, 最后对其在生物医学领域的发展方向做出了展望. 我们期望多功能的金属石墨纳米囊能够为今后的临床生物医学应用提供可靠的纳米平台.     

Label‐Free and Ultra‐Low Level Detection of Salmonella enterica Serovar Typhimurium Using Electrochemical Impedance Spectroscopy

An immunosensor for rapid and low level detection of the bacterial pathogen Salmonella enterica Serovar Typhimurium was designed and developed based upon label‐free electrochemical impedance spectroscopy and correlated to viable cell counts. The immunosensor was fabricated by electroplating gold onto a disposable printed circuit board (PCB) electrode by immobilizing monoclonal antibody (MAb) specific against Salmonella typhimurium cell surface lipopolysaccharide (LPS) onto the surface of the electrode. Use of mass‐fabricated and electroplated PCB electrodes allowed for disposable, highly sensitive, and rapid detection of Salmonella in an aqueous environment. Results demonstrate that in purified solution, Salmonella can be detected as low as 10 CFU in a 100 μL volume and label‐free and rapid manner in fewer than 90 s. The cost effective approach described here can be used for detection of pathogens with relevance for healthcare, food, and environmental applications.     

Gold‐loading magnetic core–shell organic/inorganic nanocomposites: facile preparation and multiple properties

Magnetic composite nanospheres (MCS) were first prepared via mini‐emulsion polymerization. Subsequently, the hybrid core–shell nanospheres were used as carriers to support gold nanoparticles. The as‐prepared gold‐loading magnetic composite nanospheres (Au‐MCS) had a hydrophobic core embed with γ‐Fe₃O₄ and a hydrophilic shell loaded by gold nanoparticles. Both the content of γ‐Fe₃O₄ and the size of gold nanoparticles could be controlled in our experiments, which resulted in fabricating various materials. On one hand, the Au‐MCS could be used as a T₂ contrast agent with a relaxivity coefficient of 362 mg^?1 ml S^?1 for magnetic resonance imaging. On the other hand, the Au‐MCS exhibited tunable optical‐absorption property over a wavelength range from 530 nm to 800 nm, which attributed to a secondary growth of gold nanoparticles. In addition, dynamic light scattering results of particle sizing and Zeta potential measurements revealed that Au‐MCS had a good stability in an aqueous solution, which would be helpful for further applications. Finally, it showed that the Au‐MCS were efficient catalysts for reductions of hydrophobic nitrobenzene and hydrophilic 4‐nitrophenol that could be reused by a magnetic separation process. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and characterization of water‐soluble gold nanoparticles stabilized by comb‐shaped copolymers

The water‐soluble gold nanoparticles stabilized by well‐defined comb‐shaped copolymers have been synthesized successfully. The hybrid nanoparticles consist of gold core and poly[poly(ethylene oxide) methyl ether acrylate]‐block‐poly(N‐isopropylacrylamide) [P(A‐MPEO)‐block‐PNIPAM] shell. The water‐soluble comb‐shaped copolymers, P(A‐MPEO)‐block‐PNIPAM with PNIPAM as a handle, were successfully synthesized via a macromonomer technique using reversible addition fragmentation chain transfer (RAFT) polymerization method. The terminal dithioester group of the comb‐shaped copolymer was reduced to a thiol end group forming SH‐terminated copolymers, P(A‐MPEO)‐block‐PNIPAM‐SH. Successively they were used to stabilize gold nanoparticles by the “grafting‐to” approach. The hybrid nanoparticles were characterized by TEM, UV–vis, and HRTEM. Because of the thermosensitive property of PNIPAM in aqueous solution, the comblike copolymer‐tethered gold nanoparticles show a sharp and reversible phase transition at 30 °C in aqueous solution, which was determined by microdifferential scanning calorimetry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 341–352, 2008     

General Route to Multifunctional Uniform Yolk/Mesoporous Silica Shell Nanocapsules: A Platform for Simultaneous Cancer‐Targeted Imaging and Magnetically Guided Drug Delivery

Hollow mesoporous SiO₂ (mSiO₂) nanostructures with movable nanoparticles (NPs) as cores, so‐called yolk‐shell nanocapsules (NCs), have attracted great research interest. However, a highly efficient, simple and general way to produce yolk‐mSiO₂ shell NCs with tunable functional cores and shell compositions is still a great challenge. A facile, general and reproducible strategy has been developed for fabricating discrete, monodisperse and highly uniform yolk‐shell NCs under mild conditions, composed of mSiO₂ shells and diverse functional NP cores with different compositions and shapes. These NPs can be Fe₃O₄ NPs, gold nanorods (GNRs), and rare‐earth upconversion NRs, endowing the yolk‐mSiO₂ shell NCs with magnetic, plasmonic, and upconversion fluorescent properties. In addition, multifunctional yolk‐shell NCs with tunable interior hollow spaces and mSiO₂ shell thickness can be precisely controlled. More importantly, fluorescent‐magnetic‐biotargeting multifunctional polyethyleneimine (PEI)‐modified fluorescent Fe₃O₄@mSiO₂ yolk‐shell nanobioprobes as an example for simultaneous targeted fluorescence imaging and magnetically guided drug delivery to liver cancer cells is also demonstrated. This synthetic approach can be easily extended to the fabrication of multifunctional yolk@mSiO₂ shell nanostructures that encapsulate various functional movable NP cores, which construct a potential platform for the simultaneous targeted delivery of drug/gene/DNA/siRNA and bio‐imaging.     

Magnetic separation of heavy metal ions and evaluation based on surface‐enhanced Raman spectroscopy: Copper(II) ions as a case study

A new approach was developed for the magnetic separation of copper(II) ions with easy operation and high efficiency. p‐Mercaptobenzoic acid served as the modified tag of Fe₂O₃@Au nanoparticles both for the chelation ligand and Raman reporter. Through the chelation between the copper(II) ions and carboxyl groups on the gold shell, the Fe₂O₃@Au nanoparticles aggregated to form networks that were enriched and separated from the solution by a magnet. A significant decrease in the concentration of copper(II) ions in the supernatant solution was observed. An extremely sensitive method based on surface‐enhanced Raman spectroscopy was employed to detect free copper(II) ions that remained after the magnetic separation, and thus to evaluate the separation efficiency. The results indicated the intensities of the surface‐enhanced Raman spectroscopy bands from p‐mercaptobenzoic acid were dependent on the concentration of copper(II) ions, and the concentration was decreased by several orders of magnitude after the magnetic separation. The present protocol effectively decreased the total amount of heavy metal ions in the solution. This approach opens a potential application in the magnetic separation and highly sensitive detection of heavy metal ions.     

Chemical Design of Nuclear‐Targeting Mesoporous Silica Nanoparticles for Intra‐nuclear Drug Delivery

Targeted drug delivery has been widely explored for efficient tumor therapy with desired efficacy but minimized side effects. It is widely known that large numbers of DNA‐toxins, such as doxorubicin, genes, reactive oxygen species, serving as therapeutic agents, can result in maximized therapeutic effects via the interaction directly with DNA helix. So after cellular uptake, these agents should be further delivered into cell nuclei to play their essential roles in damaging the DNA helix in cancer cells. Here, we demonstrate the first paradigm established in our laboratory in developing nuclear‐targeted drug delivery systems (DDSs) based on MSNs for enhanced therapeutic efficiency in the hope of speeding their translation into the clinics. Firstly, nuclear‐targeting DDSs based on MSNs, capable of intranuclear accumulation and drug release therein, were designed and constructed for the first time, resulting in much enhanced anticancer effects both in vitro and in vivo. Such an MSNs‐based and nuclear‐targeted drug/agent delivery strategy was further applied to overcome multidrug resistance (MDR) of malignant tumors, intra‐nuclearly deliver therapeutic genes, photosensitizers, radio‐enhancement agents and photothermal agents to realize efficient gene therapy, photodynamic therapy, radiation therapy and photothermal therapy, respectively.     

Hierarchical Structures Based on Functionalized Magnetic Cores and Layered Double‐Hydroxide Shells: Concept,Controlled Synthesis,and Applications

The combination of magnetic particles and layered double hydroxide (LDHs) materials leads to the formation of hierarchical composites that can take full advantages of each component; this is an effective approach for achieving multifunctional materials with intriguing properties. This Concept article summarizes several important strategies for the fabrication of magnetic‐core/LDH‐shell hierarchical nanocomposites, including direct coprecipitation, layer‐by‐layer assembly, and in situ growth methods. The obtained nanocomposites exhibit excellent performance as multifunctional materials for promising applications in targeted drug delivery, efficient separation, and catalysis. The fabrication and application of magnetic‐core/LDH‐shell nanocomposite materials represent a new direction in the development of LDH‐based multifunctional materials, which will contribute to the progress of chemistry and material science.     

Precisely Size‐Tunable Magnetic/Plasmonic Core/Shell Nanoparticles with Controlled Optical Properties

Star‐like amphiphilic triblock copolymers were rationally designed and synthesized by combining two sequential atom‐transfer radical polymerization reactions with a click reaction. Subsequently, a family of uniform magnetic/plasmonic core/shell nanoparticles was crafted by capitalizing on these triblock copolymers as nanoreactors. The diameter of the magnetic core and the thickness of the plasmonic shell could be independently and accurately controlled by varying the molecular weights (i.e., the chain lengths) of the inner and intermediate blocks of the star‐like triblock copolymers, respectively. The surface plasmonic absorption of core/shell nanoparticles with different core diameters and shell thicknesses was systematically studied and theoretically modeled. This robust strategy provides easy access to a large variety of multifunctional nanoparticles with large lattice mismatches for use in optics, optoelectronics, catalysis, or bioimaging.