Synergistic Enhancement of Electrocatalytic Activity toward Oxygen Reduction Reaction in Alkaline Electrolytes with Pentabasic (Fe,B, N,S, P)‐Doped Reduced Graphene Oxide

As alternatives to Pt‐based electrocatalysts, the development of nonprecious metal catalysts with high performance in the cathodic oxygen reduction reaction (ORR) is highly desirable for widespread use in fuel cells. Here we report a simple approach for preparing pentabasic (Fe, B, N, S, P)‐doped reduced graphene oxide (rGO) via a two‐step doping method of adding boric acid and ferric chloride to ternary (N, S, P)‐doped rGO (NSPG). Electrochemical investigation of the composites for the ORR revealed that simultaneously doping appropriate amounts of Fe and B into the NSPG produced a synergistic effect that endowed the prepared catalyst with both a positively shifted ORR half‐wave potential and high selectivity for the 4e^? reduction of O₂. The optimized Fe₂B‐NSPG catalyst approached a 4e^? process for the ORR with a half‐wave potential (E_1/2=0.90 V vs. RHE) even 30 mV higher than that of the commercial Pt/C catalyst in alkaline solution. Furthermore, relative to the Pt/C catalyst, the Fe₂B‐NSPG demonstrated superior stability and excellent tolerance of the methanol cross‐over effect. This simple method afforded pentabasic (Fe, B, N, S, P)‐doped rGO as a promising nonprecious metal catalyst used for alkaline fuel cells.     

Hierarchical Nanotubes Constructed by Co9S8/MoS2 Ultrathin Nanosheets Wrapped with Reduced Graphene Oxide for Advanced Lithium Storage

Nanostructured hybrid metal sulfides have attracted intensive attention due to their fascinating properties that are unattainable by the single‐phased counterpart. Herein, we report an efficient approach to construct cobalt sulfide/molybdenum disulfide (Co₉S₈/MoS₂) wrapped with reduced graphene oxide (rGO). The unique structures constructed by ultrathin nanosheets and synergetic effects benefitting from bimetallic sulfides provide improved lithium ions reaction kinetics, and they retain good structural integrity. Interestingly, the conductive rGO can facilitate electron transfer, increase the electronic conductivity and accommodate the strain during cycling. When evaluated as anode materials for lithium‐ion batteries (LIBs), the resultant reduced graphene oxide‐coated cobalt sulfide/molybdenum disulfide (Co₉S₈/MoS₂@rGO) nanotubes deliver high specific capacities of 1140, 948, 897, 852, 820, 798 and 784 mAh g^?1 at the various discharging current densities of 0.2, 0.5, 1, 2, 3, 4 and 5 A g^?1, respectively. In addition, they can maintain an excellent cycle stability with a discharge capacity of 807 mAh g^?1 at 0.2 A g^?1 after 70 cycles, 787 mAh g^?1 at 1 A g^?1 after 180 cycles and 541 mAh g^?1 at 2 A g^?1 after 200 cycles. The proposed method may offer fundamental understanding for the rational design of other hybrid functional composites with high Li‐storage properties.     

Coordination Chemistry of [Co(acac)2] with N‐Doped Graphene: Implications for Oxygen Reduction Reaction Reactivity of Organometallic Co‐O4‐N Species

Hybridization of organometallic complexes with graphene‐based materials can give rise to enhanced catalytic performance. Understanding the chemical structures within hybrid materials is of primary importance. In this work, archetypical hybrid materials are synthesized by the reaction of an organometallic complex, [Co^II(acac)₂] (acac=acetylacetonate), with N‐doped graphene‐based materials at room temperature. Experimental characterization of the hybrid materials and theoretical calculations reveal that the organometallic cobalt‐containing species is coordinated to heterocyclic groups in N‐doped graphene as well as to its parental acac ligands. The hybrid material shows high electrocatalytic activity for the oxygen reduction reaction (ORR) in alkaline media, and superior durability and methanol tolerance to a Pt/C catalyst. Based on the chemical structures and ORR experiments, the catalytically active species is identified as a Co‐O₄‐N structure.     

Unpaired 3d Electrons on Atomically Dispersed Cobalt Centres in Coordination Polymers Regulate both Oxygen Reduction Reaction (ORR) Activity and Selectivity for Use in Zinc–Air Batteries

Reversible oxygen conversion is important for various green energy technologies. Herein we synthesize a series of bimetallic coordination polymers by varying the Ni/Co ratio and using HITP (HITP=2,3,6,7,10,11‐hexaiminotriphenylene) as the ligand, to interrogate the role of metal centres in modulating the activity of the oxygen reduction reaction (ORR). Co₃HITP₂ and Ni₃HITP₂ are compared. Unpaired 3d electrons in Co₃HITP₂ result in less coplanarity but more radical character. Thus, despite of a reduced crystallinity and conductivity, the best ORR activity, comparable to 20 % Pt/C, is obtained for Co₃HITP₂, showing the 3d orbital configuration of the metal centre promotes ORR. Experimental and DFT studies show a transition of ORR pathway from four‐electron for Co₃HITP₂ to two‐electron for Ni₃HITP₂. Rechargeable zinc–air batteries using Co₃HITP₂ as the air cathode catalyst demonstrate excellent energy efficiency and stability.     

负载硫化钴纳米颗粒的N、S共掺杂石墨烯氧还原电催化剂的制备及性能

采用D-氨基葡萄糖作为Co分散剂和碳源,硫脲作为氮源和硫源,以NaCl为模板制备负载硫化钴纳米颗粒的N、S共掺杂三维石墨烯氧还原电催化剂(CoS/N/S/rGO)。CoS/N/S/rGO具有良好的氧还原反应(ORR)活性,起始电位和半波电位分别为960和815 mV,性能与商业Pt/C相当。此外,CoS/N/S/rGO表现出明显的4电子转移特性和超低的过氧化氢产率。与基于Pt/C的锌-空气电池相比,基于CoS/N/S/rGO的锌-空气电池在6 mol·L~(-1) KOH和0.2 mol~(-1) Zn(CH_3COO)_2碱性电解质中显示出更高的恒电流放电性能以及更好的稳定性。     

Cobalt Phenanthroline–Indole Macrocycles as Highly Active Electrocatalysts for Oxygen Reduction

The replacement of scarce and expensive platinum species poses a challenge in fuel‐cell development. The design and synthesis of a novel type of Co^II–N₄ macrocyclic complex, [CoN₄], based on the phenanthroline–indole macrocyclic ligand (PIM) is reported. This unique ligand allows the formation of mono‐ and dinuclear complexes with defined active sites that facilitate the direct four‐electron reduction of oxygen. Electrochemical measurements revealed that the [CoN₄]/C (20 wt %) catalysts have a high activity and long‐term stability for the oxygen‐reduction reaction (ORR) under alkaline conditions, similar to the Pt/C catalyst. These structurally well‐defined complexes represent a nonprecious alternative to platinum species for future fuel‐cell applications.     

Synthesis of Cobalt Sulfide/Sulfur Doped Carbon Nanocomposites with Efficient Catalytic Activity in the Oxygen Evolution Reaction

Cobalt sulfide/sulfur doped carbon composites (Co₉S₈/S‐C) were synthesized by calcining a rationally designed sulfur‐containing cobalt coordination complex in an inert atmosphere. From the detailed transmission electron microscopy (TEM) and X‐ray photoelectron spectroscopy (XPS) analyses, the electrocatalytically active Co₉S₈ nanoparticles were clearly obtained and combined with the thin sulfur doped carbon layers. Electrochemical data showed that Co₉S₈/S‐C had a good activity and long‐term stability in catalyzing oxygen evolution reaction in alkaline electrolyte, even better than the traditional RuO₂ electrocatalyst. The excellent electrocatalytic activity of Co₉S₈/S‐C was mainly attributed to the synergistic effect between the Co₉S₈ catalyst which contributed to the oxygen evolution reaction and the sulfur doped carbon layer which facilitated the adsorption of reactants, prevented the Co₉S₈ particles from aggregating and served as the electrically conductive binder between each component.     

Coated/Sandwiched rGO/CoSx Composites Derived from Metal–Organic Frameworks/GO as Advanced Anode Materials for Lithium‐Ion Batteries

Rational composite materials made from transition metal sulfides and reduced graphene oxide (rGO) are highly desirable for designing high‐performance lithium‐ion batteries (LIBs). Here, rGO‐coated or sandwiched CoS_x composites are fabricated through facile thermal sulfurization of metal–organic framework/GO precursors. By scrupulously changing the proportion of Co²⁺ and organic ligands and the solvent of the reaction system, we can tune the forms of GO as either a coating or a supporting layer. Upon testing as anode materials for LIBs, the as‐prepared CoS_x‐rGO‐CoS_x and rGO@CoS_x composites demonstrate brilliant electrochemical performances such as high initial specific capacities of 1248 and 1320 mA h g^?1, respectively, at a current density of 100 mA g^?1, and stable cycling abilities of 670 and 613 mA h g^?1, respectively, after 100 charge/discharge cycles, as well as superior rate capabilities. The excellent electrical conductivity and porous structure of the CoS_x/rGO composites can promote Li⁺ transfer and mitigate internal stress during the charge/discharge process, thus significantly improving the electrochemical performance of electrode materials.     

Self‐Assembling Synthesis of Free‐standing Nanoporous Graphene–Transition‐Metal Oxide Flexible Electrodes for High‐Performance Lithium‐Ion Batteries and Supercapacitors

The synthesis of nanoporous graphene by a convenient carbon nanofiber assisted self‐assembly approach is reported. Porous structures with large pore volumes, high surface areas, and well‐controlled pore sizes were achieved by employing spherical silica as hard templates with different diameters. Through a general wet‐immersion method, transition‐metal oxide (Fe₃O₄, Co₃O₄, NiO) nanocrystals can be easily loaded into nanoporous graphene papers to form three‐dimensional flexible nanoarchitectures. When directly applied as electrodes in lithium‐ion batteries and supercapacitors, the materials exhibited superior electrochemical performances, including an ultra‐high specific capacity, an extended long cycle life, and a high rate capability. In particular, nanoporous Fe₃O₄–graphene composites can deliver a reversible specific capacity of 1427.5 mAh g^?1 at a high current density of 1000 mA g^?1 as anode materials in lithium‐ion batteries. Furthermore, nanoporous Co₃O₄–graphene composites achieved a high supercapacitance of 424.2 F g^?1. This work demonstrated that the as‐developed freestanding nanoporous graphene papers could have significant potential for energy storage and conversion applications.     

碳纳米纤维负载Co3S4复合材料的合成及其在染料敏化太阳电池对电极的应用

采用水热法合成四硫化三钴（Co₃S₄）催化材料,并利用球磨和喷涂技术将其制备成对电极,结合新型无碘电解液Co²⁺/Co³⁺用于染料敏化太阳电池（dye-sensitized solar cells,简称DSCs）来研究其光电性能。测试结果显示,基于Co₃S₄对电极,DSCs的能量转化效率（power conversion efficiency,简称PCE）只有6.06%,远远低于Pt对电极（8.05%）。为了提高Co₃S₄的催化能力,采用静电纺丝技术制备碳纳米纤维（electrospun carbon nanofibers,简称ECs）,结合水热法制备出不同负载量的碳纳米纤维负载四硫化三钴（Co₃S₄/ECs）复合催化材料用于对电极,结果表明,Co₃S₄/ECs的PCE最高可达（8.22±0.08）%,优于Pt对电极。     

Mild Synthesis of Pt/SnO2/Graphene Nanocomposites with Remarkably Enhanced Ethanol Electro‐oxidation Activity and Durability

We have designed a new Pt/SnO₂/graphene nanomaterial by using L ‐arginine as a linker; this material shows the unique Pt‐around‐SnO₂ structure. The Sn²⁺ cations reduce graphene oxide (GO), leading to the in situ formation of SnO₂/graphene hybrids. L ‐Arginine is used as a linker and protector to induce the in situ growth of Pt nanoparticles (NPs) connected with SnO₂ NPs and impede the agglomeration of Pt NPs. The obtained Pt/SnO₂/graphene composites exhibit superior electrocatalytic activity and stability for the ethanol oxidation reaction as compared with the commercial Pt/C catalyst owing to the close‐connected structure between the Pt NPs and SnO₂ NPs. This work should have a great impact on the rational design of future metal–metal oxide nanostructures with high catalytic activity and stability for fuel cell systems.     

Unpaired 3d Electrons on Atomically Dispersed Cobalt Centres in Coordination Polymers Regulate both Oxygen Reduction Reaction (ORR) Activity and Selectivity for Use in Zinc–Air Batteries

Reversible oxygen conversion is important for various green energy technologies. Herein we synthesize a series of bimetallic coordination polymers by varying the Ni/Co ratio and using HITP (HITP=2,3,6,7,10,11-hexaiminotriphenylene) as the ligand, to interrogate the role of metal centres in modulating the activity of the oxygen reduction reaction (ORR). Co₃HITP₂ and Ni₃HITP₂ are compared. Unpaired 3d electrons in Co₃HITP₂ result in less coplanarity but more radical character. Thus, despite of a reduced crystallinity and conductivity, the best ORR activity, comparable to 20 % Pt/C, is obtained for Co₃HITP₂, showing the 3d orbital configuration of the metal centre promotes ORR. Experimental and DFT studies show a transition of ORR pathway from four-electron for Co₃HITP₂ to two-electron for Ni₃HITP₂. Rechargeable zinc–air batteries using Co₃HITP₂ as the air cathode catalyst demonstrate excellent energy efficiency and stability.     

Preparation and electrochemical performance for methanol oxidation of pt/graphene nanocomposites

The composites of graphene nanosheets decorated by Pt nano clusters have been prepared via reduction of graphite oxide and H₂PtCl₆ in one pot. Electrochemical experiments show that the composites have superior catalytic performance toward methanol oxidation indicating the graphene may have a splendid future as catalysts carrier in electrocatalysis and fuel cell.     

碳纳米纤维负载Co_3S_4复合材料的合成及其在染料敏化太阳电池对电极的应用

采用水热法合成四硫化三钴(Co_3S_4)催化材料,并利用球磨和喷涂技术将其制备成对电极,结合新型无碘电解液Co~(2+)/Co~(3+)用于染料敏化太阳电池(dye-sensitized solar cells,简称DSCs)来研究其光电性能。测试结果显示,基于Co_3S_4对电极,DSCs的能量转化效率(power conversion efficiency,简称PCE)只有6.06%,远远低于Pt对电极(8.05%)。为了提高Co_3S_4的催化能力,采用静电纺丝技术制备碳纳米纤维(electrospun carbon nanofibers,简称ECs),结合水热法制备出不同负载量的碳纳米纤维负载四硫化三钴(Co_3S_4/ECs)复合催化材料用于对电极,结果表明,Co_3S_4/ECs的PCE最高可达(8.22±0.08)%,优于Pt对电极。     

A Universal and Facile Way for the Development of Superior Bifunctional Electrocatalysts for Oxygen Reduction and Evolution Reactions Utilizing the Synergistic Effect

Increasing energy demands have stimulated intense research activities on reversible electrochemical conversion and storage systems with high efficiency, low cost, and environmental benignity. It is highly challenging but desirable to develop efficient bifunctional catalysts for both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). A universal and facile method for the development of bifunctional electrocatalysts with outstanding electrocatalytic activity for both the ORR and OER in alkaline medium is reported. A mixture of Pt/C catalyst with superior ORR activity and a perovskite oxide based catalyst with outstanding OER activity was employed in appropriate ratios, and prepared by simple ultrasonic mixing. Nanosized platinum particles with a wide range of platinum to oxide mass ratios was realized easily in this way. The as‐formed Pt/C–oxide composites showed better ORR activity than a single Pt/C catalyst and better OER activity than a single oxide to bring about much improved bifunctionality (ΔE is only ≈0.8 V for Pt/C–BSCF; BSCF=Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3?δ), due to the synergistic effect. The electronic transfer mechanism and the rate‐determining step and spillover mechanism were two possible origins of such a synergistic effect. Additionally, the phenomenon was found to be universal, although the best performance could be reached at different platinum to oxide mass ratios for different oxide catalysts. This work thus provides an innovative strategy for the development of new bifunctional electrocatalysts with wide application potentials in high‐energy and efficient electrochemical energy storage and conversion.     

Synergistic Ternary Composite (Carbon/Fe3O4@Graphene) with Hollow Microspherical and Robust Structure for Li‐Ion Storage

The electrode materials with hollow structure and/or graphene coating are expected to exhibit outstanding electrochemical performances in energy‐storage systems. 2D graphene‐wrapped hollow C/Fe₃O₄ microspheres are rationally designed and fabricated by a novel facile and scalable strategy. The core@double‐shell structure SPS@FeOOH@GO (SPS: sulfonated polystyrene, GO: graphene oxide) microspheres are first prepared through a simple one‐pot approach and then transformed into C/Fe₃O₄@G (G: graphene) after calcination at 500 °C in Ar. During calcination, the Kirkendall effect resulting from the diffusion/reaction of SPS‐derived carbon and FeOOH leads to the formation of hollow structure carbon with Fe₃O₄ nanoparticles embedded in it. In the rationally constructed architecture of C/Fe₃O₄@G, the strongly coupled C/Fe₃O₄ hollow microspheres are further anchored onto 2D graphene networks, achieving a strong synergetic effect between carbon, Fe₃O₄, and graphene. As an anode material of Li‐ion batteries (LIBs), C/Fe₃O₄@G manifests a high reversible capacity, excellent rate behavior, and outstanding long‐term cycling performance (1208 mAh g^?1 after 200 cycles at 100 mA g^?1).     

Enhanced Electrocatalytic Activity of Dual Template Based Pt/Cu‐zeolite A/Graphene for Methanol Electrooxidation

A novel Pt/Cu‐zeolite A/graphene based electrocatalyst was successfully prepared by chemical reduction method for methanol electrooxidation. Graphite oxide and Cu functionalized zeolite A were simultaneously reduced by NaBH₄ to prepare Cu‐zeolite A/graphene support which was used to deposit Pt nanoparticles. The nanostructure and composition of as‐prepared Pt/Cu‐zeolite A/graphene composites were characterized by X‐ray diffractometer, X‐ray fluorescence, Fourier transform infrared spectrometer and scanning electron microscopy. The electrocatalytic properties of Pt/Cu‐zeolite A/graphene modified electrode for methanol oxidation were investigated by cyclic voltammetry and chronoamperometry in 0.10 mol/L H₂SO₄ + 0.50 mol/L CH₃OH solution. Compared with Pt/zeolite A/graphene electrode and Pt/graphene electrode, Pt/Cu‐zeolite A/graphene based electrode exhibited obviously enhanced current and higher electrocatalytic activity for methanol electrooxidation. The increased electrocatalytic activity was attributed to the presence of zeolite A and reduced graphene oxide based dual template, which significantly increased the effective electrode surface and facilitated the diffusion of analytes into the electroactive catalyst.     

A Strategy to Promote the Electrocatalytic Activity of Spinels for Oxygen Reduction by Structure Reversal

The electrocatalytic performance of a spinel for the oxygen reduction reaction (ORR) can be significantly promoted by reversing its crystalline structure from the normal to the inverse. As the spinel structure reversed, the activation and cleavage of O?O bonds are accelerated owing to a dissimilarity effect of the distinct metal atoms co‐occupying octahedral sites. The Co^IIFe^IIICo^IIIO₄ spinel with the Fe and Co co‐occupying inverse structure exhibits an excellent ORR activity, which even exceeds that of the state‐of‐the‐art commercial Pt/C by 42 mV in alkaline medium.     

One‐pot synthesis of magnetic zeolitic imidazolate framework/grapheme oxide composites for the extraction of neonicotinoid insecticides from environmental water samples

Magnetic zeolitic imidazolate framework 67/graphene oxide composites were synthesized by one‐pot method at room temperature for the first time. Electrostatic interactions between positively charged metal ions and both negatively charged graphene oxide and Fe₃O₄ nanoparticles were expected to chemically stabilize magnetic composites to generate homogeneous magnetic products. The additional amount of graphene oxide and stirring time of graphene oxide, Co²⁺, and Fe₃O₄ solution were investigated. The zeolitic imidazolate framework 67 and Fe₃O₄ nanoparticles were uniformly attached on the surface of graphene oxide. The composites were applied to magnetic solid‐phase extraction of five neonicotinoid insecticides in environmental water samples. The main experimental parameters such as amount of added magnetic composites, extraction pH, ionic strength, and desorption solvent were optimized to increase the capacity of adsorbing neonicotinoid insecticides. The results show limits of detection at signal‐to‐noise ratio of 3 were 0.06–1.0 ng/mL under optimal conditions. All analytes exhibited good linearity with correlation coefficients of higher than 0.9915. The relative standard deviations for five neonicotinoid insecticides in environmental samples ranged from 1.8 to 16.5%, and good recoveries from 83.5 to 117.0% were obtained, indicating that magnetic zeolitic imidazolate framework 67/graphene oxide composites were feasible for analysis of trace analytes in environmental water samples.     

Pt‐Pd‐Co Trimetallic Alloy Network Nanostructures with Superior Electrocatalytic Activity towards the Oxygen Reduction Reaction

Pt alloy nanostructures show great promise as electrocatalysts for the oxygen reduction reaction (ORR) in fuel cell cathodes. Herein, three‐dimensional (3D) Pt‐Pd‐Co trimetallic network nanostructures (TNNs) with a high degree of alloying are synthesized through a room temperature wet chemical synthetic method by using K₂PtCl₄/K₃Co(CN)₆–K₂PdCl₄/K₃Co(CN)₆ mixed cyanogels as the reaction precursor in the absence of surfactants and templates. The size, morphology, and surface composition of the Pt‐Pd‐Co TNNs are investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected‐area electron diffraction (SAED), energy dispersive spectroscopy (EDS), EDS mapping, X‐ray diffraction (XRD), and X‐ray photoelectron spectroscopy (XPS). The 3D backbone structure, solid nature, and trimetallic properties of the mixed cyanogels are responsible for the 3D structure and high degree of alloying of the as‐prepared products. Compared with commercially available Pt black, the Pt‐Pd‐Co TNNs exhibit superior electrocatalytic activity and stability towards the ORR, which is ascribed to their unique 3D structure, low hydroxyl surface coverage and alloy properties.