Synthesis,Properties, and π‐Dimer Formation of Oligothiophenes Partially Bearing Orthogonally Fused Fluorene Units

A series of oligothiophenes that incorporate cyclopenta[c]thiophene‐based units bearing spiro‐substituted dialkylfluorene was synthesized. Photophysical measurements indicated that there was no interruption in the conjugation along the oligothiophene backbones, irrespective of the number or position of this unit. Electrochemical measurements showed that the thiophene 7‐mers and 11‐mer exhibit reversible multi‐oxidation waves. The formation of cationic species was clearly observed from UV/Vis/NIR measurements. Furthermore, the UV/Vis/NIR spectra at 223 K under one‐electron oxidation conditions revealed that the unsubstituted thiophene or bithiophene units remained in the absence of intermolecular π–π interactions, whereas the formation of π‐dimeric species was observed for the thiophene 7‐mer containing an unsubstituted terthiophene ( U₃ ) unit. Theoretical calculations indicated that the combination of the U₃ unit and the all‐trans conformation decreased the intermolecular steric repulsion between the fused cyclopentene ring and its facing thiophene, which may contribute to the formation of the dimeric structure.     

Towards Molecular Design Rationalization in Branched Multi‐Thiophene Semiconductors: The 2‐Thienyl‐Persubstituted α‐Oligothiophenes

The introduction of branching in multi‐thiophene semiconductors, although granting the required solubility for processing, results in an increased molecular fluxionality and a higher level of distortion, thus hampering π conjugation. Accordingly, branched oligothiophenes require rationalization of their structure–reactivity relationships for target‐oriented design and optimization of the synthetic effort. Our current research on spiderlike oligothiophenes affords deep insight into the subject, and introduces new, easily accessible molecules with attractive functional properties. In particular, a regular series, T′X _Y , of five new multi‐thiophene systems, T′5₃ , T′8₄ , T′11₅ , T′14₆ , and T′17₇ , constituted by five, eight, 11, 14, and 17 thiophene units, respectively, their longest α‐conjugated chain consisting of tri‐, tetra‐, penta‐, hexa‐, and heptathiophene moieties, respectively, has been synthesized and fully characterized from the structural, spectroscopic, and electrochemical point of view. The electronic properties of the monomers and their electropolymerization ability are discussed and rationalized as a function of their molecular structure, particularly in comparison with the series of 5‐(2,2′‐dithiophene)yl‐persubstituted α‐oligothiophenes ( TX _Y ) previously reported by us. These oligothiophenes are easily accessible materials, with promising properties for applications as active layers in multifunctional organic devices including solar cells.     

α‐Oligofurans: A Computational Study

Recently, α‐oligofurans have emerged as interesting and promising organic electronic materials that have certain advantages over α‐oligothiophenes. In this work, α‐oligofurans were studied computationally, and their properties were compared systematically with those of the corresponding oligothiophenes. Although the two materials share similar electronic structures, overall, this study revealed important differences between α‐oligofurans and α‐oligothiophenes. Twisting studies on oligofurans revealed them to be significantly more rigid than oligothiophenes in the ground state and first excited state. Neutral α‐oligofurans have more quinoid character, higher frontier orbital energies, and higher HOMO–LUMO gaps than their α‐oligothiophene counterparts. The theoretical results suggest that oligofurans (and subsequently polyfuran) have lower ionization potentials than the corresponding oligothiophenes (and polythiophene), which in turn predicts that oligofurans can be lightly doped more easily than oligothiophenes. Oligofuran dications (8 F²⁺–14 F²⁺) of medium‐sized and longer chain lengths show a polaron‐pair character, and the polycations of α‐oligofurans cannot accommodate high positive charges as easily as their thiophene analogues.     

Potassium tert‐Butoxide Catalyzed Synthesis and Characterization of Novel 3‐Aryl‐3‐(phenylthio)‐1‐(thiophen‐3‐yl)propan‐1‐one Derivatives

A series of thiophenyl‐containing 3‐thiophene derivatives ( 4a – 4i ) were prepared via the reaction of chalcone‐analogua compounds ( 3a – 3i ) and thiophenol in the presence of catalytic amount of KOBu‐t in CH₂Cl₂ with moderate to high yields. The mechanistic pathway of the reaction was explained by the Michael‐type addition of thiophenol to chalcone derivatives ( 3a – 3i ).     

Synthesis,Electronic, and Morphological Properties of Tetrahedral Oligothiophenes with n‐Hexyl Terminal Groups

A series of tetrahedral oligothiophenes bearing n‐hexyl groups at the α‐positions of the terminal thiophene rings, (n‐C₆H₁₃(C₄H₂S)_n)₄C (Hex‐TnTM; n=1–4), has been synthesized by Kosugi–Migita–Stille coupling as a key reaction. Thanks to the improved solubility afforded by the terminal n‐hexyl groups, the largest homologue (n=4) was successfully obtained. Whereas the smaller derivatives (n=1, 2) were obtained as liquid substances, the larger derivatives (n=3, 4) were obtained as solids. Hex‐T3 TM partially adopts syn conformations between the adjacent thiophene rings in the crystal, probably owing to the packing force. Hex‐T3 TM not only appeared in the crystalline state but also the amorphous state, which was stable to up to 80 °C. Regardless of the terminal groups, the derivatives of n=2 exhibited a broad fluorescence with large Stokes shifts compared to the corresponding linear analogues, thereby suggesting the presence of intramolecular interactions between the bithiophene moieties. Interactions between terthiophene branches was also suggested in the radical cations of Hex‐T3 TM by cyclic voltammetry measurements.     

Highly stereo‐efficient synthesis and luminescence properties of novel trans‐regular vinylene– silylene–thiophene polymers

The novel trans‐stereo‐regular silylene–thiophene derivatives ( 4 , 5 ) with perfect consecutive silylene–arylene–silylene–vinylene linkage were synthesized via silylative coupling polycondensation of 2,5‐bis(vinyldimethylsilyl)thiophene ( 2 ) or 5,5′‐bis(vinyldimethylsilyl)‐2,2′‐bithiophene ( 3 ) catalyzed by ruthenium‐hydride complex [RuHCl(CO)(PCy₃)₂] ( 1 ). Their spectroscopic, absorption, and luminescence properties were characterized and compared with those of model compounds containing thiophene or bithiophene chromophores. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 127–137, 2008     

Regioselective Cage Opening of La2@D2(10611)‐C72 with 5,6‐Diphenyl‐3‐(2‐pyridyl)‐1,2,4‐triazine

The thermal reaction of the endohedral metallofullerene La₂@D₂(10611)‐C₇₂, which contains two pentalene units at opposite ends of the cage, with 5,6‐diphenyl‐3‐(2‐pyridyl)‐1,2,4‐triazine proceeded selectively to afford only two bisfulleroid isomers. The molecular structure of one isomer was determined using single‐crystal X‐ray crystallography. The results suggest that the [4+2] cycloaddition was initiated in a highly regioselective manner at the C? C bond connecting two pentagon rings of C₇₂. Subsequent intramolecular electrocyclization followed by cycloreversion resulted in the formation of an open‐cage derivative having three seven‐membered ring orifices on the cage and a significantly elongated cage geometry. The reduction potentials of the open‐cage derivatives were similar to those of La₂@D₂‐C₇₂ whereas the oxidation potentials were shifted more negative than those of La₂@D₂‐C₇₂. These results point out that further oxidation could occur easily in the derivatives.     

New selenophene‐based low‐band gap conjugated polymers for organic photovoltaics

Low‐band gap selenophene‐based polymers were synthesized. Their optoelectronic and photovoltaic properties and space‐charge limited currents were compared with those of the related thiophene‐based polymers. The band gaps of the Se‐based derivatives were approximately 0.05–0.12 eV lower than those of their thiophene counterparts. Organic photovoltaic (OPV) devices based on the blends of these polymers and 1‐(3‐methoxycarbonyl)propyl‐1‐phenyl‐[6,6]‐C₇₁ (PC₇₁BM) were fabricated, and the maximum power conversion efficiency of the OPV device based on PSPSBT and PC₇₁BM was 3.1%—with a short‐circuit current density (J_sc) of 9.3 mA cm^?2, an open‐circuit voltage (V_oc) of 0.79 V, and a fill factor of 0.42—under AM 1.5 G illumination (100 mW cm^?2). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4550–4557     

Coumarin‐3‐Aldehyde as a Scaffold for the Design of Tunable PET‐Modulated Fluorescent Sensors for Neurotransmitters

NeuroSensor 521 (NS521) is a fluorescent sensor for primary‐amine neurotransmitters based on a platform that consists of an aryl moiety appended to position C4 of the coumarin‐3‐aldehyde scaffold. We demonstrate that sensors based on this platform behave as a directly linked donor–acceptor system that operates through an intramolecular acceptor‐excited photoinduced electron transfer (a‐PET) mechanism. To evaluate the PET process, a series of benzene‐ and thiophene‐substituted derivatives were prepared and the photophysical properties, binding affinities, and fluorescence responses toward glutamate, norepinephrine, and dopamine were determined. The calculated energy of the highest occupied molecular orbital (E_HOMO) of the pendant aryl substituents, along with oxidation and reduction potential values derived from the calculated molecular orbital energy values of the platform components, allowed for calculation of the fluorescence properties of the benzene sensor series. Interestingly, the thiophene derivatives did not fit the typical PET model, highlighting the limitations of the method. A new sensor, NeuroSensor 539, displayed enhanced photophysical properties aptly suited for biological imaging. NeuroSensor 539 was validated by selectively labeling and imaging norepinephrine in secretory vesicles of live chromaffin cells.     

Benzo[b]phosphole‐Containing π‐Electron Systems: Synthesis Based on an Intramolecular trans‐Halophosphanylation and Some Insights into Their Properties

The intramolecular trans‐halophosphanylation of 2‐(aminophosphanyl)phenylacetylenes mediated by PBr₃ followed by the oxidation with H₂O₂, produces 3‐bromobenzo[b]phosphole oxide derivatives. This cyclization is also used for the synthesis of a 3‐iodo derivative by conducting the reaction in the presence of LiI. Based on this synthetic method, various benzophosphole‐containing π‐conjugated compounds, including a phosphoryl and methylene‐bridged stilbene 10 , 2,3,6,7‐tetraphenylbenzo[1,2‐b:4,5‐b′]diphosphole‐P,P′‐dioxides 11 , and their phosphine sulfide derivatives 12 , are synthesized. The study of the structure–property relationships in a series of the bridged stilbenes, including a bis(methylene)‐bridged stilbene 10 , and a bis(phosphoryl)‐bridged stilbene, reveals that as the contribution of the phosphoryl groups increased, the absorption and emission maxima substantially shift to longer wavelengths. The intrinsic substituent effects of the phosphoryl group in this skeleton are to decrease the oscillator strength of the electronic transition and thus decrease the radiative decay rate constants from the singlet excited state. Nevertheless, these compounds maintain high fluorescence quantum yields (Φ_F>0.8) owing to the significantly retarded nonradiative decay process. In the study of the benzodiphosphole derivatives 11 and 12 , their cyclic voltammetry revealed that both of the phosphoryl and phosphine sulfide derivatives have low reduction potentials (?1.7 to ?1.8 V vs ferrocene/ferrocenium couple) with the high reversibility of the redox waves. These compounds also showed high thermal stabilities with the high glass transition temperatures of 147–159 °C, indicative of their potential utilities as amorphous materials.     

Synthesis,optical, and electrochemical properties of novel copolymers on the basis of benzothiadiazole and electron‐rich arene units

Novel alternating conjugated copolymers ( P1–P6 ) consisting of an electron‐deficient benzothiadiazole and a variety of electron‐rich thiophene‐arene‐thiophene units were synthesized by palladium‐catalyzed polycondensations (Stille and Suzuki reactions), aiming at processable materials with a reduced optical band gap. The structures of P1–P6 were confirmed by ¹H NMR and ¹³C NMR, and their molecular weights were determined by size exclusion chromatography. In the Suzuki polycondensation, the role of the catalyst [Pd(PPh₃)₄ and Pd(OAc)₂] on the resulting molecular weight was investigated. Pd(OAc)₂ enhances the molecular weight of the polymers for both thiophene and phenylene bis‐boronic esters as compared with Pd(PPh₃)₄. The optical properties of the polymers were examined in solution and the solid state. The polymers with n‐octyl substituents ( P1 , P4 , P5 , and P6 ) on the thiophene rings possessed less‐planar structures as a result of torsional steric hindrance, and their absorption spectra appeared blueshifted as compared with their unsubstituted analogues ( P2 and P3 ). The electrochemical properties of the polymers were studied using cyclic voltammetry. Although the alkyl substitution affects the oxidation potential, only marginal differences in the reduction potentials were observed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2360–2372, 2002     

Asymmetrical Fluorene[2,3‐b]benzo[d]thiophene Derivatives: Synthesis,Solid‐State Structures,and Application in Solution‐Processable Organic Light‐Emitting Diodes

A series of novel asymmetrical fused compounds containing the backbone of fluorene[2,3‐b]benzo[d]thiophene (FBT) were effectively synthesized and fully characterized. Single‐crystal X‐ray studies demonstrated that the length of the substituent side chains greatly affects the solid‐state packing of the obtained fused compounds. DFT, photophysical, and electrochemical studies all showed that the FBTs have large band gaps, low‐lying HOMO energy levels, and therefore good stability toward oxidation. Moreover, the substituents strongly influence the fluorescence properties of the resulting FBT derivatives. The di‐n‐hexyl compound exhibits intense fluorescence in solution with the highest quantum yield of up to 91 %. Solution‐processed green phosphorescent organic light‐emitting diodes with the di‐n‐butyl derivative as the host material exhibited a maximum brightness of 14 185 cd m^?2 and a luminescence efficiency of 12 cd A^?1.     

Thieno[3,2‐b]thiophene‐Diketopyrrolopyrrole‐Based Quinoidal Small Molecules: Synthesis,Characterization, Redox Behavior,and n‐Channel Organic Field‐Effect Transistors

We report the synthesis, characterization, redox behavior, and n‐channel organic field‐effect (OFET) characteristics of a new class of thieno[3,2‐b]thiophene‐diketopyrrolopyrrole‐based quinoidal small molecules 3 and 4 . Under ambient atmosphere, solution‐processed thin‐film transistors based on 3 and 4 exhibit maximum electron mobilities up to 0.22 and 0.16 cm² V^?1 s^?1, respectively, with on‐off current ratios (I_on/I_off) of more than than 10⁶. Cyclic voltammetry analysis showed that this class of quinoidal derivatives exhibited excellent reversible two‐stage reduction behavior. This property was further investigated by a stepwise reductive titration of 4 , in which sequential reduction to the radical anion and then the dianion were observed.     

Synthesis and structure‐property relationship of new donor–acceptor‐type conjugated monomers and polymers on the basis of thiophene and benzothiadiazole

We have synthesized three new donor–acceptor‐type monomers to achieve soluble and processable low‐band gap polymers, 4,7‐bis(4‐octyl‐2‐thienyl)‐2,1,3‐benzothiadiazole (B4TB), 4,7‐bis(3‐octyl‐2‐thienyl)‐2,1,3‐benzothiadiazole (B3TB), and 4‐(3‐octyl‐2‐thienyl)‐7‐(4‐octyl‐2‐thienyl)‐2,1,3‐benzothiadiazole (B34TB), by the Suzuki coupling reaction. Using B4TB and B3TB, two soluble high molecular weight regioregular head‐to‐head and tail‐to‐tail polymers poly[4,7‐bis(4‐octyl‐2‐thienyl)‐2,1,3‐ benzothiadiazole] (PB4TB) and poly[4,7‐bis(3‐octyl‐2‐thienyl)‐2,1,3‐benzothiadiazole] (PB3TB) were prepared via iron(III) chloride‐mediated oxidative polymerization. The structures of the polymers were confirmed by ¹H and ¹³C NMR, and the molecular weights were determined by size exclusion chromatography. The optical properties (absorbance and fluorescence) of the monomers and polymers were studied and compared with unsubstituted analogues. The monomers and polymers bearing octyl substituents on the thiophene rings pointing away from the benzothiadiazole units (B4TB and PB4TB) possess a more planar structure, and their optical spectra appear redshifted as compared with those having the octyl chain nearer to the benzothiadiazole (B3TB and PB3TB). The optical band gaps of PB3BT (E_g = 2.01 eV) and PB4BT (E_g = 1.96 eV), however, are at much higher energy levels than that of the unsubstituted electrochemically polymerized PBTB material (E_g = 1.1–1.2 eV) as a result of steric effects of the octyl chains. The electrochemical properties of the monomers and polymers were examined using cyclic voltammetry and reflect the effect of alkyl substitution. B4TB and PB4TB were oxidized at a lower potential than B3TB and PB3TB, whereas their reduction potentials were less negative. The electrochemical band gap calculated from the onset of the reduction and oxidation process agreed with the optical band gap calculated from the absorption edges. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 251–261, 2002     

Synthesis,solid‐state,and charge‐transport properties of conjugated polythiophene‐S,S‐dioxides

An alkylated semiconducting polymer comprising alternating bithiophene‐[all]‐S,S‐dioxide and aromatic monothiophene units in the polymer backbone was synthesized with the intent of modifying the energy gap and lowest unoccupied molecular orbital for use as a stable n‐type semiconductor. Films spun from this semiconducting polymer were characterized utilizing X‐ray scattering, near edge X‐ray absorption fine structure spectroscopy, ultraviolet photoelectron spectroscopy, and thin‐film field effect transistors to determine how oxidation of the thiophene ring systems impacts the structural and electronic properties of the polymer. The thiophene‐S,S‐dioxide polymers have lower optical and electrical band gaps than corresponding thiophene polymers. X‐ray scattering results indicate that the polymers are well ordered with the π–π stacking distances increased by 0.4 Å relative to analogous thiophene polymers. The electrical stability of these polymers is poor in transistors with a drop in the field effect mobility by approximately one order of magnitude upon addition of just 5% of the thiophene‐S,S‐dioxide unit in a copolymer with thiophene. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Electronic spectra and first‐order hyperpolarizability of 4‐(dicyanomethylene)‐2,6‐bis‐ (2′‐thiophene‐vinyl)‐pyran derivatives

On the basis of the ZINDO program, we have designed a program to calculate the first‐order hyperpolarizability β_ijk and β_μ according to the sum‐over‐states (SOS) expression. The first‐order hyperpolarizability of 4‐(dicyanomethylene)‐2,6‐bis‐(2′‐thiophene‐vinyl)‐pyran derivatives were studied. The calculated results were that the 4‐(dicyanomethylene)‐2,6‐bis‐(2′‐thiophene‐vinyl)‐pyran derivatives exhibit good nonlinearity with their β₀ values, which are slightly less than that of the corresponding 2,6‐bis‐styryl‐4‐(dicyanomethylene)‐pyran derivatives. It does not agree with the auxiliary donor–acceptor effects theory. The 4‐(dicyanomethylene)‐2,6‐bis‐(2′‐thiophene‐vinyl)‐pyran derivatives, having two low‐lying electronic excited states that contribute to the molecular hyperpolarizability in an additive manner, are good candidates as chromophores due to their high nonlinearities and good thermal stability. © 2001 John Wiley & Sons, Inc. Int J Quant Chem 82: 65–72, 2001     

Synthesis and properties of monodisperse multi‐triarylamine‐substituted oligothiophenes and 4,7‐bis(2′‐oligothienyl)‐2,1,3‐benzothiadiazoles for organic solar cell applications

Two novel series of monodisperse multi‐triarylamine‐substituted oligothiophenes, G ₂ ‐ OT ( n )‐ G ₂ with thiophene unit (n) varying from 6 to 8, and 4,7‐bis(2′‐oligothienyl)‐2,1,3‐benzothiadiazoles G ₂ ‐ OT ( n ) BTD ‐ G ₂ (n = 2, 4, 6) have been synthesized by the Suzuki coupling reactions. With an elongation of alkyl‐substituted oligothiophene core or an incorporation of benzothiadiazole into the central core, the absorption and emission spectra of G ₂ ‐ OT ( n )‐ G ₂ and G ₂ ‐ OT ( n ) BTD ‐ G ₂ series red‐shift substantially with the optical gap reducing to 1.95 eV for G ₂ ‐ OT ( 6 ) BTD ‐ G ₂ . Alkyl‐substitution onto oligothiophene backbone not only improves the solubility of the highly extended dendrimers but also renders coplanarity of the dendritic oligothiophene backbone at the excited state, which results in the enhancement of fluorescence quantum efficiency. The bulk heterojunction solar cells using these newly synthesized dendritic oligothiophenes as a donor material and [6,6]‐phenyl C₆₁‐butyric acid methyl ester (PCBM) as an acceptor material were fabricated and investigated which showed an increase in device performance as compared with those of the lower homologues. On increasing the loading of PCBM from 1.5 to 3 times in the active layer, there was also an enhancement in device performance with power conversion efficiencies of as‐fabricated solar cells increasing from 0.18% to 0.32%. In addition, proper annealing procedure could significantly improve the device performance of the dendrimer‐based photovoltaic cell. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 137–148, 2009     

Addition of S‐Heterocyclic Carbenes to Fullerenes: Formation and Characterization of Dithiomethano‐Bridged Derivatives

The reactions of novel S‐heterocyclic carbenes (SHCs), which were prepared by the cycloaddition of disilenes and digermenes to CS₂, with C₆₀ and Sc₃N@I_h‐C₈₀ afforded the corresponding methano‐bridged fullerenes. The [6,6]‐closed and [6,6]‐open structures were characterized for the SHC adducts of C₆₀ and Sc₃N@I_h‐C₈₀, respectively. These derivatives exhibited relatively low oxidation potentials, indicative of the electron‐donating effects of the SHC addends. The electronic properties of the SHC derivatives were clarified by the density functional theory calculations.     

High‐Potential Perfluorinated Phthalocyanine–Fullerene Dyads for Generation of High‐Energy Charge‐Separated States: Formation and Photoinduced Electron‐Transfer Studies

High oxidation potential perfluorinated zinc phthalocyanines (ZnF_nPcs) are synthesised and their spectroscopic, redox, and light‐induced electron‐transfer properties investigated systematically by forming donor–acceptor dyads through metal–ligand axial coordination of fullerene (C₆₀) derivatives. Absorption and fluorescence spectral studies reveal efficient binding of the pyridine‐ (Py) and phenylimidazole‐functionalised fullerene (C₆₀Im) derivatives to the zinc centre of the F_nPcs. The determined binding constants, K, in o‐dichlorobenzene for the 1:1 complexes are in the order of 10⁴ to 10⁵ M ^?1; nearly an order of magnitude higher than that observed for the dyad formed from zinc phthalocyanine (ZnPc) lacking fluorine substituents. The geometry and electronic structure of the dyads are determined by using the B3LYP/6‐31G* method. The HOMO and LUMO levels are located on the Pc and C₆₀ entities, respectively; this suggests the formation of ZnF_nPc^.+–C₆₀Im^.? and ZnF_nPc^.+–C₆₀Py^.? (n=0, 8 or 16) intra‐supramolecular charge‐separated states during electron transfer. Electrochemical studies on the ZnPc–C₆₀ dyads enable accurate determination of their oxidation and reduction potentials and the energy of the charge‐separated states. The energy of the charge‐separated state for dyads composed of ZnF_nPc is higher than that of normal ZnPc–C₆₀ dyads and reveals their significance in harvesting higher amounts of light energy. Evidence for charge separation in the dyads is secured from femtosecond transient absorption studies in nonpolar toluene. Kinetic evaluation of the cation and anion radical ion peaks reveals ultrafast charge separation and charge recombination in dyads composed of perfluorinated phthalocyanine and fullerene; this implies their significance in solar‐energy harvesting and optoelectronic device building applications.     

Synthesis and Reactions of Some Heterocyclic Candidates Based on 2‐Amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene Moiety as Anti‐Arrhythmic Agents

In continuation of our previous work, a series of novel thiophene derivatives 4 , 5 , 6 , 8 , 9 , 9a , 9b , 9c , 9d , 9e , 10 , 10a , 10b , 10c , 10d , 10e , 11 , 12 , 13 , 14 , 15 , 16 were synthesized by the reaction of ethyl 2‐amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carboxylate ( 1 ) or 2‐amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carbonitrile ( 2 ) with different organic reagents. Fusion of 1 with ethylcyanoacetate or maleic anhydride afforded the corresponding thienooxazinone derivative 4 and N‐thienylmalimide derivative 5 , respectively. Acylation of 1 with chloroacetylchloride afforded the amide 6 , which was cyclized with ammonium thiocyanate to give the corresponding N‐theinylthiazole derivative 8 . On the other hand, reaction of 1 with substituted aroylisothiocyanate derivatives gave the corresponding thiourea derivatives 9a , 9b , 9c , 9d , 9e , which were cyclized by the action of sodium ethoxide to afford the corresponding N‐substituted thiopyrimidine derivatives 10a , 10b , 10c , 10d , 10e . Condensation of 2 with acid anhydrides in refluxing acetic acid afforded the corresponding imide carbonitrile derivatives 11 , 12 , 13 . Similarly, condensation of 1 with the previous acid anhydride yielded the corresponding imide ethyl ester derivatives 14 , 15 , 16 , respectively. The structures of newly synthesized compounds were confirmed by IR, ¹H NMR, ¹³C NMR, MS spectral data, and elemental analysis. The detailed synthesis, spectroscopic data, LD₅₀, and pharmacological activities of the synthesized compounds are reported.