Production of COx-Free Hydrogen and Few-Layer Graphene Nanoplatelets by Catalytic Decomposition of Methane over Ni-Lignin-Derived Nanoparticles

Nickel (Ni)-lignin nanocomposites were synthesized from nickel nitrate and kraft lignin then catalytically graphitized to few-layer graphene-encapsulated nickel nanoparticles (Ni@G). Ni@G nanoparticles were used for catalytic decomposition of methane (CDM) to produce COx-free hydrogen and graphene nanoplatelets. Ni@G showed high catalytic activity for methane decomposition at temperatures of 800 to 900 °C and exhibited long-term stability of 600 min time-on-stream (TOS) without apparent deactivation. The catalytic stability may be attributed to the nickel dispersion in the Ni@G sample. During the CDM reaction process, graphene shells over Ni@G nanoparticles were cracked and peeled off the nickel cores at high temperature. Both the exposed nickel nanoparticles and the cracked graphene shells may participate the CDM reaction, making Ni@G samples highly active for CDM reaction. The vacancy defects and edges in the cracked graphene shells serve as the active sites for methane decomposition. The edges are continuously regenerated by methane molecules through CDM reaction.     

Fabrication of magnetically separable palladium–graphene nanocomposite with unique catalytic property of hydrogenation

One step solvothermal route has been developed to prepare a well dispersed magnetically separable palladium–graphene nanocomposite, which can act as a unique catalyst against hydrogenation due to the uniform decoration of palladium nanoparticles throughout the surface of the magnetite–graphene nanocomposite and hence can be reused for several times. In addition to catalytic activity, palladium nanoparticles also facilitate the formation and homogeneous distribution of magnetite (Fe₃O₄) nanoparticles onto the graphene surfaces or else an agglomerated product has been obtained after the solvothermal reduction of graphene oxide in presence of Fe³⁺ alone.     

Hydrogen-transfer reduction of carbonyl compounds promoted by nickel nanoparticles

Nickel(0) nanoparticles, generated from nickel(II) chloride, lithium powder and a catalytic amount of 4,4-di-tert-butylbiphenyl (DTBB) in THF at room temperature, have been found to promote the reduction of a variety of ketones and aldehydes by transfer hydrogenation using isopropanol as the hydrogen donor. The nickel nanoparticles were characterised and could be re-utilised with a good performance in the absence of a base. A mechanistic study demonstrates that the reaction proceeds through a dihydride-type mechanism.     

Nanoscale skeletal nickel catalysts prepared via ‘bottom up’ method

NiAl nanoparticles are of considerable importance because of interest in examining the effects of size, surface area, and composition on their physical and catalytic properties. Recently, a new method for the ‘bottom up’ wet chemical preparation of nickel aluminides has been reported. The ability to leach the aluminum from this system provides an entrance to the preparation of skeletal‐type metal catalysts similar to those produced in Raney‐type systems. Furthermore, it is believed that these nanoparticulate catalysts should provide high surface areas and high activities, while the presence of aluminum within the bulk of these catalysts provides additional stability. Here, we present the results of studies conducted on this system which compare their properties and behavior with traditional bulk Raney nickel systems. Additionally, we show that we are able to alter the properties of these nanoparticles by changing the stoichiometric ratio of nickel and aluminum. The properties of all systems have been analyzed through the use of nitrogen adsorption, X‐ray diffraction, and elemental analysis. Finally, the catalysts generated have been compared for their activity in the hydrogenation of butyronitrile. Copyright © 2002 John Wiley & Sons, Ltd.     

Organic solvent‐free catalytic hydrogenation of diene‐based polymer nanoparticles in latex form. Part II. Kinetic analysis and mechanistic study

The central challenge that has limited the development of catalytic hydrogenation of diene‐based polymer latex (i.e., latex hydrogenation) in large‐scale production pertains to how to accomplish the optimal interplay of accelerating the hydrogenation rate, decreasing the required quantity of catalyst, and eliminating the need for an organic solvent. Here, we attempt to overcome this dilemma through decreasing the dimensions of the polymer substrate (such as below 20 nm) used in the hydrogenation process. Very small diene‐based polymer nanoparticles were synthesized and then used as the substrates for the subsequent latex hydrogenation. The effects of particle size, temperature, and catalyst concentration on the hydrogenation rate were fully investigated. An apparent first‐order kinetic model was proposed to describe the rate of hydrogen uptake with respect to the concentration of the olefinic substrate (C?C). Mass transfer of both the hydrogen and catalyst involved in this solid (polymer)–liquid (water)–gas (hydrogen) three‐phase latex system is discussed. The competitive coordination of the catalyst between the C?C and acrylonitrile units within the copolymer was elucidated. It was found that (1) using very small diene‐based polymer nanoparticles as the substrate, the hydrogenation rate of polymer latex can be increased vastly to achieve a high conversion of 95% while a quite low level of catalyst loading is required; (2) this latex hydrogenation process was completely free of organic solvent and no cross‐linking was found; (3) the mass transfer of hydrogen is not a rate‐determining step in the present hydrogenation reactions; (4) the catalyst was dispersed homogeneously within the polymer nanoparticles; (5) for the reaction that has reached about 95 mol % conversion, the kinetic study shows that the reaction is chemically controlled with an apparent activation energy of 100–110 kJ/mol; (6) the strong coordination of C[tbond]N to the catalytically active species RhH₂Cl(PPh₃)₂ imposed a negative effect on the hydrogenation activity. The present research provides a comprehensive study to appreciate the underlying chemistry of latex hydrogenation of diene‐based polymer nanoparticles and more importantly shows great promise toward the commercialization of a “green” catalytic hydrogenation operation of a diene‐based polymer latex in industry. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Graphene‐Supported Ultrafine Metal Nanoparticles Encapsulated by Mesoporous Silica: Robust Catalysts for Oxidation and Reduction Reactions

Graphene nanosheet‐supported ultrafine metal nanoparticles encapsulated by thin mesoporous SiO₂ layers were prepared and used as robust catalysts with high catalytic activity and excellent high‐temperature stability. The catalysts can be recycled and reused in many gas‐ and solution‐phase reactions, and their high catalytic activity can be fully recovered by high‐temperature regeneration, should they be deactivated by feedstock poisoning. In addition to the large surface area provided by the graphene support, the enhanced catalytic performance is also attributed to the mesoporous SiO₂ layers, which not only stabilize the ultrafine metal nanoparticles, but also prevent the aggregation of the graphene nanosheets. The synthetic strategy can be extended to other metals, such as Pd and Ru, for preparing robust catalysts for various reactions.     

Sandwich‐Structured Graphene–Nickel Silicate–Nickel Ternary Composites as Superior Anode Materials for Lithium‐Ion Batteries

We report the synthesis of sandwich‐structured graphene–nickel silicate–Ni ternary composites by using the solvothermal method followed by a simple in situ reduction procedure. The composites show an interesting structure with graphene sandwiched between two layers of well‐dispersed Ni nanoparticles (NPs) anchored on ultrathin nickel silicate nanosheets. These ternary composites exhibit enhanced performance as anode materials owing to the synergistic effect between the graphene matrix and electrochemically inert Ni nanoparticles, an effect that holds promise for the design and fabrication of other advanced electrode materials.     

Polymerization of graphene oxide nanosheet by using of aminoclay: Electrocatalytic activity of its platinum nanohybrids

This study describes the polymerization of graphene oxide (GO) nanosheet to reduced‐GO‐aminoclay (RGC) by covalent functionalization of chemically reactive epoxy groups on the basal planes of GO with amine groups of magnesium phyllosilicate clay (known as aminoclay). The resulting RGC sheets were characterized and applied to support platinum nanostructures at toluene/water interface. Pt nanoparticles (NPs) with diameters about several nanometers were adhered to RGC sheets by chemical reduction of [PtCl₂(cod)] (cod = cis,cis‐1,5‐cyclooctadiene) complex. Catalytic activity of Pt NPs thin films were investigated in the methanol oxidation reaction. Cyclic voltammetry results exhibit that the Pt/reduced‐GO (RGO) and Pt/RGC thin films showed improved catalytic activity in methanol oxidation reaction in comparison to other Pt NPs thin films, demonstrating that the prepared Pt/RGO and Pt/RGC thin films are promising catalysts for direct methanol fuel cell.     

Kinetic and Thermodynamic Specific Features of Hydrogenation of Hexene-1, Heptene-1, and Cyclohexene on Catalyst Containing Copper Nanoparticles

Kinetics of hydrogenation of hexene-1, heptene-1, and cyclohexene on copper nanoparticles was studied. To examine the thermodynamic specific features, the entropy of formation of an activated complex, rate constants, and conversion were calculated. A conclusion that the key role is played by the entropy factor in the formation of the activated complex is made on the basis of the data obtained. The similarity between the mechanisms by which activated complexes are formed in the hydrogenation of hexene-1, heptene-1, and cyclohexene and in that of hexyne-1, hexadiene-1,5, and benzene with the use of nickel nanoparticles was confirmed. The results obtained enable a conclusion about the high catalytic activity of copper nanoparticles in reactions of hydrogenation of unsaturated hydrocarbons in the temperature range 140–200°C at a pressure of 2 atm.     

Recent Updates of Chemically Modified Electrodes in Analytical Chemistry

This review article updates recent developments in chemically modified electrodes (CMEs) towards analytical applications for the year of 2000–2002 with 179 references. The broad topics are subdivided into four main categories: i) physisorption/chemisorption, ii) covalently linked, iii) homogenous (uniform) multilayer and iv) heterogeneous (non‐uniform) multilayer CMEs. The criteria for the preparation of CMEs in elecrocatalytic systems are clearly described in Section 1. Some of the encouraging results related to Au‐nanoparticles for DNA detection and new ceramic carbon, carbon nanotubes, copper‐plated screen‐printed and Nafion/lead ruthenate pyrochlore CMEs for catalytic application were especially discussed in this review.     

Selective hydrogenation by Pd nanoparticles embedded in polyelectrolyte multilayers

Alternating adsorption of poly(acrylic acid) and a polyethylenimine-Pd(II) complex on alumina and subsequent reduction of Pd(II) by NaBH4 yield catalytic Pd nanoparticles embedded in multilayer polyelectrolyte films. The polyelectrolytes limit aggregation of the particles and impart catalytic selectivity in the hydrogenation of alpha-substituted unsaturated alcohols by restricting access to catalytic sites. Hydrogenation of allyl alcohol by encapsulated Pd(0) nanoparticles can occur as much as 24-fold faster than hydrogenation of 3-methyl-1-penten-3-ol. Additionally, the nanoparticle/polyelectrolyte system suppresses unwanted substrate isomerization, when compared to a commercial palladium catalyst. Selective diffusion through poly(acrylic acid)/polyethlyenimine membranes suggests that hydrogenation selectivities are due to different rates of diffusion to nanoparticle catalysts. First-order kinetics are also consistent with a diffusion-limited mechanism. Further exploitation of the versatility of polyelectrolyte films should increase selectivity in hydrogenation as well as other reactions.     

Magnetic property and structural study of nickel supported on reduced graphene oxide prepared by chemical vapor deposition

Nickel supported on reduced graphene oxide was synthesized by chemical vapor deposition technique. The crystal structure and magnetic properties of the prepared sample were studied by means of Raman spectrometry, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), inductively coupled plasma optical emission spectrometry (ICP-OES), and vibrating sample magnetometry (VSM). The result of Raman spectroscopy revealed the structure of few-layer graphene as the support for Ni nanoparticles. XP spectrum confirmed the presence of metallic Ni on the a few-layer graphene surface. TE micrograph showed that the nickel nanoparticles were sphere shaped and the mean particle size is about 20 nm deposited on the reduced graphene oxide. The magnetic study showed the ferromagnetic behavior of 3.2 wt% nickel over reduced graphene oxide at room temperature.     

草簇状石墨烯片限域Pd纳米粒子及其催化应用(英文)

通过氨基离子液体改性石墨烯,并将其固载于堇青石表面,作为负载型Pd催化剂的载体.所制备的Pd催化剂经加氢老化后,表面石墨烯呈草簇状结构,将Pd纳米粒子限域于片层内,有效防止了Pd的流失和团聚.在重要的工业反应对羧基苯甲醛(4-CBA)加氢中,此结构催化剂与传统的钯碳催化剂相比,表现出很好的稳定性     

Labeling Graphene Oxygen Groups with Europium

Graphene‐related materials contain chemically bonded oxygen atoms in the form of epoxy, hydroxy, carboxy, and carbonyl groups. It is important to determine the quantity of oxygen atoms and to understand their position on the graphene sheet. However, visualization of these groups by standard methods is a challenge. Here, we utilize europium(III) as a selective label for oxygen‐containing groups. We studied three different graphene‐related materials: 1) graphene oxide, 2) chemically reduced graphene oxide, and 3) thermally reduced graphene oxide (the number of oxygen containing groups decreases from material 1 to 3). We show that it is possible to efficiently use Eu as a label of oxygen‐containing groups. This Eu label could be applied to determine the precise location of oxygen‐containing groups on graphene sheets and also induce novel optical, electrochemical, and catalytic properties.     

Catalytic hydrogenation of aromatic nitro compounds by functionalized ionic liquids-stabilized nickel nanoparticles in aqueous phase: The influence of anions

Two kinds of nickel nanoparticles (NPs) well-dispersed in aqueous phase have been conveniently prepared by reducing nickel(II) salt with hydrazine in the presence of amino group (?NH₂) functionalized ionic liquids: 1-(3-aminopropyl)-2,3-dimethylimidazolium bromide ([AMMIM][Br]) and 1-(3-aminopropyl)-2,3-dimethylimidazolium acetate ([AMMIM][AcO]). The Ni(0) particles are composed of smaller ones which assemble in a blackberry-like shape. The Ni nanoparticles stabilized with [AMMIM][AcO] are much larger than those stabilized with [AMMIM][Br], and the former unexpectedly give much higher activity in the selective hydrogenation of citral and nitrobenzene (NB) in aqueous phase. The Ni(0) nanocatalysts dispersed in aqueous phase are stable enough to be reused at least five times without significant loss of catalytic activity and selectivity during the catalytic recycles.     

Synthesis of Ni/SiO<Subscript>2</Subscript> nanoparticles for catalytic benzene hydrogenation

Nickel nanoparticles supported on silica were prepared by hydrazine reduction in aqueous medium. The obtained solids were characterized by X-ray diffraction (XRD), Transmission Electronic Microscopy (TEM), Electron Diffraction (ED), hydrogen chemisorption, and Temperature Programmed Desorption of hydrogen (H₂-TPD). The catalytic properties were evaluated for benzene hydrogenation in the temperature range 75–230 °C. XRD patterns reveal presence of the metallic nickel particles with fcc structure. Metal dispersion and hydrogen storage increase with decreasing metal particle size. The H₂-TPD profiles exhibit two domains, one due to desorption of hydrogen from Ni metal and another due to spillover from metal to the support. The catalytic activity strongly depends on the metal loading. It increases with decreasing metal loading. This is attributed to metal surface area, which also increases with decreasing metal loading. Kinetic studies of benzene hydrogenation on the Ni catalysts showed that the benzene partial order is around −2. This significant negative value is ascribed to a strong adsorption of benzene on the catalyst surface.     

Enhanced Peroxidase‐Like Properties of Graphene–Hemin‐Composite Decorated with Au Nanoflowers as Electrochemical Aptamer Biosensor for the Detection of K562 Leukemia Cancer Cells

Graphene composites with hemin and gold nanoparticles show a better performance for hydrogen peroxide decomposition compared to that of the three components alone or duplex/hybrid complexes. Our previous studies showed that the morphology of the Au nanoparticles may greatly influence the catalytic activity of graphene‐family peroxidase mimics. Recently, we found that Au nanoflowers could grow in situ and form on the surface of hemin/RGO (reduced graphene oxide). The prickly morphology of this Au nanoflower brought a higher catalytic ability with enhanced kinetic parameters than traditional Au nanoparticles that showed a smooth surface. Therefore, based on this discovery, a smart electrochemical aptamer biosensor for K562 leukemia cancer cells was further presented with good performance in selectivity and sensitivity attributed to the excellent mimetic peroxidase catalytic activity of this newly synthesized Au nanoflower decorated graphene–hemin composite (H‐RGO‐Au NFs).     

金属有机骨架材料负载镍纳米颗粒催化硝基苯加氢

以MIL-53(Al)、MIL-96(Al)和MIL-120(Al) (MIL: Material Institute of Lavorisier)三种金属有机骨架材料为载体, 采用浸渍法制备了负载廉价金属镍纳米颗粒的催化剂. 将其用于催化硝基苯加氢合成苯胺反应, 发现以MIL-53(Al)为载体制得的催化剂表现出优异的催化性能. 采用不同的镍前驱体, 如硝酸镍、醋酸镍、乙二胺合镍, 制备了一系列Ni/MIL-53(Al)催化剂. 通过X射线衍射、傅里叶变换红外光谱、电感耦合等离子体、N₂物理吸附、H₂程序升温还原、透射电镜等技术对其进行了表征, 研究了镍前驱体对金属-载体相互作用、镍颗粒尺寸以及分散程度的影响.结果表明:以乙二胺合镍为镍前驱体制得的催化剂具有金属-载体相互作用适中、镍纳米颗粒更小(4-5 nm)和分布更均匀的特点, 在硝基苯加氢反应中表现出优异的催化性能, 硝基苯转化率达到100%.回收重复使用5次后, 此催化剂仍保持催化活性,硝基苯转化率达92%.     

Transition Metal (Mn,Fe, Co,Ni)‐Doped Graphene Hybrids for Electrocatalysis

The development of electrocatalysts is crucial for renewable energy applications. Metal‐doped graphene hybrid materials have been explored for this purpose, however, with much focus on noble metals, which are limited by their low availability and high costs. Transition metals may serve as promising alternatives. Here, transition metal‐doped graphene hybrids were synthesized by a simple and scalable method. Metal‐doped graphite oxide precursors were thermally exfoliated in either hydrogen or nitrogen atmosphere; by changing exfoliation atmospheres from inert to reductive, we produced materials with different degrees of oxidation. Effects of the presence of metal nanoparticles and exfoliation atmosphere on the morphology and electrocatalytic activity of the hybrid materials were investigated using electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray photoelectron spectroscopy, and cyclic voltammetry. Doping of graphene with transition metal nanoparticles of the 4th period significantly influenced the electrocatalysis of compounds important in energy production and storage applications, with hybrid materials exfoliated in nitrogen atmosphere displaying superior performance over those exfoliated in hydrogen atmosphere. Moreover, nickel‐doped graphene hybrids displayed outstanding electrocatalytic activities towards reduction of O₂ when compared to bare graphenes. These findings may be exploited in the research field of renewable energy.     

Palladated cyclodextrin and halloysite containing polymer and its carbonized form as efficient hydrogenation catalysts

β‐Cyclodextrin (β‐CD) and glycidyl methacrylate monomer were polymerized in the presence of functionalized halloysite nanoclay (Hal) to afford a polymeric network (Hal‐P‐CD) containing Hal and CD. Hal‐P‐CD was then applied as a catalyst support for the immobilization of Pd nanoparticles. The resulting nanocomposite, Pd@Hal‐P‐CD, could serve as a catalyst for the hydrogenation of nitrobenzene. The precise study by the preparation of control samples confirmed the contribution of CD as both phase transfer and capping agent, P (polymer) and Hal to the catalysis. Moreover, the results confirmed the importance of CD: glycidyl methacrylate monomer ratio. Pd@Hal‐P‐CD was also carbonized to prepare Pd@Hal‐C. Notably, the characterization of Pd@Hal‐C showed that carbonization led to the growth of mean diameter of Pd nanoparticles, increase of Pd content and partial destruction of Hal. However, the catalytic activity of Pd@Hal‐C was superior to Pd@Hal‐P‐CD. Pd@Hal‐C was also highly recyclable and could be recovered and recycled for several reaction runs. The study of the carbonization temperature showed that this factor affected the nature of the resulting carbon and the catalyst prepared at elevated temperature showed higher catalytic activity.