Dihydronaphthalene‐Fused Boron–Dipyrromethene (BODIPY) Dyes: Insight into the Electronic and Conformational Tuning Modes of BODIPY Fluorophores

A new series of boron–dipyrromethene (BDP, BODIPY) dyes with dihydronaphthalene units fused to the β‐pyrrole positions ( 1 a – d , 2 ) has been synthesised and spectroscopically investigated. All the dyes, except pH‐responsive 1 d in polar solvents, display intense emission between 550–700 nm. Compounds 1 a and 1 b with a hydrogen atom and a methyl group in the meso position of the BODIPY core show spectroscopic properties that are similar to those of rhodamine 101, thus rendering them potent alternatives to the positively charged rhodamine dyes as stains and labels for less polar environments or for the dyeing of latex beads. Compound 1 d , which carries an electron‐donating 4‐(dimethylamino)phenyl group in the meso position, shows dual fluorescence in solvents more polar than dibutyl ether and can act as a pH‐responsive “light‐up” probe for acidic pH. Correlation of the pK_a data of 1 d and several other meso‐(4‐dimethylanilino)‐substituted BODIPY derivatives allowed us to draw conclusions on the influence of steric crowding at the meso position on the acidity of the aniline nitrogen atom. Preparation and investigation of 2 , which carries a nitrogen instead of a carbon as the meso‐bridgehead atom, suggests that the rules of colour tuning of BODIPYs as established so far have to be reassessed; for all the reported couples of meso‐C‐ and meso‐N‐substituted BODIPYs, the exchange leads to pronounced redshifts of the spectra and reduced fluorescence quantum yields. For 2 , when compared with 1 a , the opposite is found: negligible spectral shifts and enhanced fluorescence. Additional X‐ray crystallographic analysis of 1 a and quantum chemical modelling of the title and related compounds employing density functional theory granted further insight into the features of such sterically crowded chromophores.     

Synthesis,Structure, and Optical Studies of Donor–Acceptor‐Type Near‐Infrared (NIR) Aza–Boron‐Dipyrromethene (BODIPY) Dyes

Six donor–acceptor‐type near‐infrared (NIR) aza–boron‐dipyrromethene (BODIPY) dyes and their corresponding aza–dipyrrins were designed and synthesized. The donor moieties at the 1,7‐positions of the aza–BODIPY core were varied from naphthyl to N‐phenylcarbazole to N‐butylcarbazole. The 3,5‐positions were also substituted with phenyl or thienyl groups in the aza–BODIPYs. Photophysical, electrochemical, and computational studies were carried out. The absorption and emission spectra of aza–BODIPYs were significantly redshifted (≈100 nm) relative to the parent tetraphenylaza–BODIPY. Fluorescence studies suggested effective energy transfer (up to 93 %) from donor groups to the aza–BODIPY core in all of the compounds under study. Time‐dependent (TD)‐DFT studies indicated effective electronic interactions between energy donor groups and aza–dipyrrin unit in all the aza–BODIPYs studied. The HOMO–LUMO gap (ΔE) calculated from cyclic voltammetry data was found to be lower for six aza–BODIPYs relative to their corresponding aza–dipyrrins.     

Boron‐Containing Polycyclic Aromatic Hydrocarbons: Facile Synthesis of Stable,Redox‐Active Luminophores

Herein we show that replacing the two meso carbon atoms of the polycyclic aromatic hydrocarbon (PAH) bisanthene by boron atoms transforms a near‐infrared dye into an efficient blue luminophore. This observation impressively illustrates the impact of boron doping on the frontier orbitals of PAHs. To take full advantage of this tool for the targeted design of organic electronic materials, the underlying structure–property relationships need to be further elucidated. We therefore developed a modular synthesis sequence based on a Peterson olefination, a stilbene‐type photocyclization, and an Si–B exchange reaction to substantially broaden the palette of accessible polycyclic aromatic organoboranes and to permit a direct comparison with their PAH congeners.     

Novel Cyanine Dyes: Synthesis,Characterization and Photosensitization‐Structure Correlation

Novel furo, thieno and pyrrolo[2,3‐b]pyrazole cyanine dyes were synthesized. The structure‐photosensitization properties correlation of the dyes were examined in 95% ethanol solution by absorption spectroscopy. The chemical structure of the starting biheterocyclic compounds and their derived cyanine dyes were confirmed by elemental analysis, IR and ¹H NMR spectroscopy.     

New 3‐(Heteroaryl)‐2‐iminocoumarin‐based Borate Complexes: Synthesis,Photophysical Properties,and Rational Functionalization for Biosensing/Biolabeling Applications

Members of a series of boron difluoride complexes with 3‐(heteroaryl)‐2‐iminocoumarin ligands bearing both a phenolic hydroxyl group (acting as a fluorogenic center) and an N‐aryl substituent (acting as a stabilizing moiety) have been synthesized in good yields by applying a straightforward two‐step method. These novel fluorogenic dyes belong to the family of “Boricos” (D. Frath et al., Chem. Commun.­ 2013 , 49, 4908–4910) and are the first examples of phenol‐based fluorophores of which the photophysical properties in the green‐yellow spectral range are dramatically improved by N,N‐chelation of a boron atom. Modulation of their fluorescence properties through reversible chemical modification of their phenol moieties has been demonstrated by the preparation of the corresponding 2,4‐dinitrophenyl (DNP) ethers, which led to a dramatic “OFF‐ON” fluorescence response upon reaction with thiols. Additionally, to expand the scope of these “7‐hydroxy‐Borico” derivatives, particularly in biolabeling, amine or carboxylic acid functionalities amenable to (bio)conjugation have been introduced within their scaffold. Their utility has been demonstrated in the preparation of fluorescent bovine serum albumin (BSA) conjugates and “Borico”‐DOTA‐like scaffolds in an effort to design novel monomolecular multimodal fluorescence‐ radioisotope imaging agents.     

Synthesis and Molecular Properties of Acceptor‐Substituted Squaraine Dyes

A broad series of more than 20 acceptor‐substituted squaraines was synthesized that feature different acceptor functionalities at the central squaraine four‐membered ring. The influence of these acceptor units on the reactivity of semisquaraine precursors and stability of the respective squaraines were explored. Thereby the dicyanovinyl group was found to be the most versatile acceptor group that enabled various modifications at the donor moiety of the squaraine scaffold, leading to an extended series of dicyanovinyl‐functionalized squaraines. The variation of donor units afforded a set of NIR fluorophores that cover a wavelength region from the visible at about 650 nm far into the NIR up to 920 nm with fluorescence quantum yields between 0.93 and 0.11 and outstanding optical brightness. This excellent optical property is related to a rigid molecular scaffold that is fixed in an all‐cis configuration by the additional dicyanovinyl acceptor unit. The change of the molecular symmetry from C_2h to C_2v upon functionalization of the squaraine core with dicyanovinyl acceptor group has been confirmed in solution by electro‐optical absorption (EOA) spectroscopy, revealing permanent ground‐state dipole moments μ_g in the range between 4.3 and 6.4 D. These dipole moments direct an antiparallel packing of the molecules in the solid state according to single‐crystal X‐ray analyses achieved for four dicyanovinyl‐functionalized squaraines. The structural properties, the EOA results, as well as the band shapes of the optical spectra indicate that these polymethine dyes are cyanine‐type chromophores. It is worth noting that the orientation of the dipole moment vectors is orthogonal to the orientation of the transition dipole moment vectors, which is an uncommon but characteristic feature of this rather novel class of polymethine dyes. With regard to applications of these dyes in organic solar cells, their redox properties were also studied by cyclic voltammetry.     

Anti‐cancer Herbal Drug Berberine – Sensitive Determination Using Boron‐doped Diamond Electrode

Determination of berberine, an isoquinoline plant alkaloid, with antibacterial, antiparasitic, antifungal, hypotensive and antitumoral effects, was proposed by introducing square wave voltammetry on boron‐doped diamond electrode. At optimized experimental parameters, in Britton‐Robinson buffer solution pH 5 berberine provides 3 oxidation peaks (+0.63; +1.14 and +1.34 V) and one reduction (+0.15 V) (vs. Ag/AgCl electrode), with good repeatability (relative standard deviation of 2.6 % and 1.9 % for 8 measurements at 0.5 and 10 µM concentration level, respectively). Calibration curve was linear in wade linear range from 0.1 to 50 µM with limit of detection of 0.04 µM. The proposed procedure was successfully applied for the determination of berberine in seed extract from Argemone mexicana with satisfactory recovery (102–102.6 %). The developed method may represent a sensitive alternative to highly toxic mercury electrodes, modified electrodes and chromatographic methods.     

Synthesis and Fluorescence Properties of Pyrimidine‐Based Diboron Complexes with Donor–π–Acceptor Structures

Pyrimidine‐based diboron complexes bearing β‐iminoenolate ligands and phenyl groups as bulky substituents on the boron atoms were synthesized as novel fluorescent dyes, and their fluorescence properties were investigated in solution and in the solid state. The diboron complexes with donor–π–acceptor structures showed positive solvatochromism in the fluorescence spectra. The cyano derivative exhibited the most dramatic redshift of the fluorescence maximum F_max with increasing solvent polarity (from 551 nm in n‐hexane to 710 nm in acetonitrile). The diboron complexes showed solid‐state fluorescence in the range of 578–706 nm with fluorescence quantum yields of 0.06–0.28. Additionally, the trifluoromethyl derivative exhibited solvent‐inclusion solid‐state fluorescence. The trifluoromethyl derivative formed toluene‐inclusion and ethyl acetate‐inclusion crystals. The toluene‐inclusion crystal (F_max=668 nm, Φ_f=0.16) showed a blueshifted F_max and higher Φ_f value compared to the original trifluoromethyl derivative (F_max=694 nm, Φ_f=0.08) in the solid state. On the other hand, the F_max (709 nm) and Φ_f (0.04) values of the ethyl acetate‐inclusion crystal were redshifted and lower, respectively.     

Modified 6‐Aza Uridines: Highly Emissive pH‐Sensitive Fluorescent Nucleosides

Optimized facile syntheses and highly desirable spectroscopic properties of two isomorphic fluorescent pyrimidines, comprising a 1,2,4‐triazine motif conjugated to a thiophene ( 1 a ) or a furan ( 1 b ), are described. Although structurally related to their 5‐modified uridine counterparts, these modified 6‐aza‐uridines reveal dramatically improved fluorescence properties and a remarkable sensitivity to polarity and pH changes. The thiophene derivative 1 a has an absorption maximum around 335 nm, which upon excitation yields visible emission with a polarity‐sensitive maximum and fluorescence quantum yield ranging from 415 nm (Φ=0.8) to 455 nm (Φ=0.2) in dioxane and water, respectively. Nucleoside 1 a also displays susceptibility to acidity. Correlating emission intensity and solution pH yields a pK_a value of 6.7–6.9, reasonably close to physiological pH values. The results illustrate that highly sought‐after fluorescence features (brightness and responsiveness) are not necessarily the trait of large fluorophores alone, but can be observed with probes that meet stringent isomorphic design criteria.     

Highly Diastereoselective Synthesis of Methylenecyclobutanes by Merging Boron‐Homologation and Boron‐Allylation Strategies

A highly diastereoselective synthesis of methylenecyclobutanes possessing a quaternary stereocenter is reported, in which boron homologation of an easily‐generated cyclobutenylmetal species is performed, followed by an allylation reaction. Combining three steps in a one‐pot process further optimized the method, which afforded the expected adducts in excellent yields and stereoselectivity, starting from commercially available 4‐bromobutyne.     

Blue‐to‐Orange Color‐Tunable Laser Emission from Tailored Boron‐Dipyrromethene Dyes

A series of meso‐substituted boron‐bipyrromethene (BODIPY) dyes are synthesized and their laser and photophysical properties systematically studied. Laser emission covering a wide visible spectral region (from blue to orange) is obtained by just changing the electron donor character of the heteroatom at position 8. The additional presence of methyl groups at positions 3 and 5 results in dyes with a photostability similar to that of the unsubstituted dye but with much improved efficiency. Correlation of the lasing properties of the different dyes to their photophysical properties provides inklings to define synthetic strategies of new BODIPY dyes with enhanced efficiency and modulated wavelength emission over the visible spectral region.     

Photosynthetic Antenna‐Reaction Center Mimicry with a Covalently Linked Monostyryl Boron‐Dipyrromethene–Aza‐Boron‐Dipyrromethene–C60 Triad

An efficient functional mimic of the photosynthetic antenna‐reaction center has been designed and synthesized. The model contains a near‐infrared‐absorbing aza‐boron‐dipyrromethene (ADP) that is connected to a monostyryl boron‐dipyrromethene (BDP) by a click reaction and to a fullerene (C₆₀) using the Prato reaction. The intramolecular photoinduced energy and electron‐transfer processes of this triad as well as the corresponding dyads BDP‐ADP and ADP‐C₆₀ have been studied with steady‐state and time‐resolved absorption and fluorescence spectroscopic methods in benzonitrile. Upon excitation, the BDP moiety of the triad is significantly quenched due to energy transfer to the ADP core, which subsequently transfers an electron to the fullerene unit. Cyclic and differential pulse voltammetric studies have revealed the redox states of the components, which allow estimation of the energies of the charge‐separated states. Such calculations show that electron transfer from the singlet excited ADP (¹ADP*) to C₆₀ yielding ADP^.+‐C₆₀^.? is energetically favorable. By using femtosecond laser flash photolysis, concrete evidence has been obtained for the occurrence of energy transfer from ¹BDP* to ADP in the dyad BDP‐ADP and electron transfer from ¹ADP* to C₆₀ in the dyad ADP‐C₆₀. Sequential energy and electron transfer have also been clearly observed in the triad BDP‐ADP‐C₆₀. By monitoring the rise of ADP emission, it has been found that the rate of energy transfer is fast (≈10¹¹ s^?1). The dynamics of electron transfer through ¹ADP* has also been studied by monitoring the formation of C₆₀ radical anion at 1000 nm. A fast charge‐separation process from ¹ADP* to C₆₀ has been detected, which gives the relatively long‐lived BDP‐ADP^.+C₆₀^.? with a lifetime of 1.47 ns. As shown by nanosecond transient absorption measurements, the charge‐separated state decays slowly to populate mainly the triplet state of ADP before returning to the ground state. These findings show that the dyads BDP‐ADP and ADP‐C₆₀, and the triad BDP‐ADP‐C₆₀ are interesting artificial analogues that can mimic the antenna and reaction center of the natural photosynthetic systems.     

Asymmetric Donor–π‐Acceptor‐Type Benzo‐Fused Aza‐BODIPYs: Facile Synthesis and Colorimetric Properties

Novel aza‐diisoindolylmethene and their BF₂‐chelating complexes (benzo‐fused aza‐BODIPYs) were synthesized on a large scale and in a facile manner from phthalonitrile in tBuOK‐DMF solution. The unique asymmetric donor–π‐acceptor structure facilitates B? N bond detachment in the presence of trifluoroacetic acid (TFA) in dichloromethane, resulting in sharp color change from red to colorless, with over 250 nm hypsochromic shift in the absorption maximum. This colorimetric process can be reversed by adding a very small amount of proton‐accepting solvents or compounds. A ¹H and ¹¹B NMR spectroscopy study and also density functional theory (DFT) calculations suggest that TFA‐induced B? N bond cleavage may disrupt the whole π‐conjugation of the BODIPY molecule, resulting in significant colorimetric behavior.     

Boron‐Double‐Ring Sheet,Fullerene, and Nanotubes: Potential Hydrogen Storage Materials

Similar to carbon‐based graphene, fullerenes and carbon nanotubes, boron atoms can form sheets, fullerenes, and nanotubes. Here we investigate several of these novel boron structures all based on the boron double ring within the framework of density functional theory. The boron sheet is found to be metallic and flat in its ground state. The spherical boron cage containing 180 atoms is also stable and has I symmetry. Stable nanotubes are obtained by rolling up the boron sheet, and all are metallic. The hydrogen storage capacity of boron nanostructures is also explored, and it is found that Li‐decorated boron sheets and nanotubes are potential candidates for hydrogen storage. For Li‐decorated boron sheets, each Li atom can adsorb a maximum of 4 H₂ molecules with g_d=7.892 wt %. The hydrogen gravimetric density increases to g_d=12.309 wt % for the Li‐decorated (0,6) boron nanotube.     

Synthesis and Optical Properties of Water‐Soluble Polyglycerol‐Dendronized Rylene Bisimide Dyes

Four new water‐soluble polyglycerol‐dendronized perylene, terrylene, and quaterrylene bisimides have been synthesized and characterized with respect to their optical properties in polar organic solvents and water by using UV/Vis and fluorescence spectroscopy. All of these dyes were highly soluble in water, but the size of the chosen polyglycerol dendron was only sufficient to completely suppress dye aggregation for the core‐unsubstituted perylene derivative. Their high solubility in water and their absorption and emission wavelengths up to the NIR region make the core‐unsubstituted perylene and terrylene bisimides ideal candidates for applications in bioimaging, whilst the lack of fluorescence for quaterrylene bisimide in all polar solvents does not warrant further investigation of this chromophore in fluorescence and imaging applications. Likewise, tuning of the emission of rylene bisimides towards longer wavelengths by employing electron‐donating bay substituents is not a promising strategy, owing to the lower fluorescence quantum yields in polar solvents and, in particular, in water.     

Boron‐Containing Polycyclic Aromatic Hydrocarbons: Facile Synthesis of Stable,Redox‐Active Luminophores

Herein we show that replacing the two meso carbon atoms of the polycyclic aromatic hydrocarbon (PAH) bisanthene by boron atoms transforms a near‐infrared dye into an efficient blue luminophore. This observation impressively illustrates the impact of boron doping on the frontier orbitals of PAHs. To take full advantage of this tool for the targeted design of organic electronic materials, the underlying structure–property relationships need to be further elucidated. We therefore developed a modular synthesis sequence based on a Peterson olefination, a stilbene‐type photocyclization, and an Si–B exchange reaction to substantially broaden the palette of accessible polycyclic aromatic organoboranes and to permit a direct comparison with their PAH congeners.     

pH‐Sensitive Mechanical Properties of Elastin‐Based Hydrogels

Ionizable amino acids in protein‐based hydrogels can confer pH‐responsive behavior. Because elastin‐like polypeptides (ELPs) have an established sequence and can crosslink to form hydrogels, they are an ideal system for creating pH‐sensitive materials. This study examines different parameters that might affect pH‐sensitive behavior and characterizes the mechanical and physical properties between pH 3 and 11 of three ELP‐based crosslinked hydrogels. The first finding is that varying the amount of crosslinker affects the overall stiffness and resilience of the hydrogels but does not strongly affect water content, swelling ratio, or pH sensitivity. Second, the choice of two popular tag sequences, which vary in histidine and aspartic acid content, does not have a strong effect on pH‐sensitive properties. Last, selectively blocking lysine and tyrosine residues through acetylation significantly decreases the pH‐sensitive zeta potential. Acetylated hydrogels also demonstrate different behavior at low pH values with reduced swelling, reduced water content, and higher stiffness. Overall, this work demonstrates that ELP hydrogels with ionizable groups are promising materials for environmentally‐responsive applications such as drug delivery, tissue engineering, and microfluidics.