How a Redox‐Innocent Metal Promotes the Formal Reductive Elimination of Biphenyl Using Redox‐Active Ligands

One of the most compelling strategies for utilizing redox‐active ligands is to perform redox events at the ligands to avoid accessing prohibitively high energy oxidation states at the metal center. This has been demonstrated experimentally in many systems, yet there is little understanding of the fundamental electronic structures involved with these transformations or how to control them. Here, the reductive elimination of biphenyl from [M(isq)₂Ph₂] (M=Ti, Zr, and Hf and isq=2,4‐di‐tert‐butyl‐6‐tert‐butyliminosemiquinone) was studied computationally. It was found that the metal remains in the +IV oxidation state and all redox chemistry was mediated by the redox‐active ligands. Two types of electron‐transfer mechanisms were identified, an asymmetric unpaired electron transfer (UET) and a symmetric pairwise electron transfer (PET), the former always being lower in energy. The energetic differences between these two mechanisms were explained through simple molecular orbital theory arguments. Despite the metal’s redox‐inactivity, it still has a marked influence on the calculated energetics of the reaction, with the Ti systems being much more reactive than the Zr/Hf systems. This primarily originates from the shorter Ti?Ph bond, which leads to a stronger filled‐filled interaction between these ligands at the reactant state. This greater reactant destabilization leads to the lower activation energies.     

Tuning the Functional Properties of Metal Complexes Containing Polytopic Heteroaromatic Nitrogen Ligands

The preparation, characterization, and optimization of the functional properties of mono‐ and polynuclear coordination complexes containing heteroaromatic nitrogen ligands are discussed here, taking the advantage of numerous studies performed in our laboratories on exploring a variety of different metal ions and polytopic ligands. We highlight how very minor changes in connectivity, composition, and polarity of the molecular entities employed in the self‐assembly steps may significantly affect the structural, thermal, sorptive, magnetic, and mesomorphic behavior of the resulting materials. Examples from three different classes are included: 1) pyrazolate‐based polynuclear coordination compounds, 2) homoleptic and heteroleptic coordination polymers, and 3) 2,2′‐bipyridine metal‐based liquid crystals.     

Synthesis and Metal Complexes of Thiourea Ligands Containing Carbohydrate‐Derived Substituents

Two glucose‐derived thiourea derivatives, 2a and 2b , were prepared by addition of the corresponding amino sugars to a solution of 4‐nitrobenzoyl isothiocyanate (Scheme 1). The thioureas were isolated as colorless solids in good yields and were fully characterized by NMR spectroscopy, optical rotation, elemental analysis, and also by single‐crystal X‐ray diffraction. Attempts to obtain Cu^II and Ni^II bis(chelate) complexes with these thioureas failed. However, the C(1)‐protected thiourea derivative 2a reacted with orthopalladated acetato‐bridged dimers to afford the corresponding monomeric Pd^II complexes 3 and 4 (Scheme 2). In these compounds, the thiourea coordinates to the metal as monoanionic O,S chelate ligand, which was confirmed by X‐ray crystallography.     

Ansa‐Bridged Bis(benzene) Titanium Complexes

Taking advantage of an improved synthesis of [Ti(η⁶‐C₆H₆)₂], we report here the first examples of ansa‐bridged bis(benzene) titanium complexes. Deprotonation of [Ti(η⁶‐C₆H₆)₂] with nBuLi in the presence of N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine (pmdta) leads to the corresponding 1,1′‐dilithio salt [Ti(η⁶‐C₆H₅Li)₂] ? pmdta that enables the preparation of the first one‐ and two‐atom‐bridged complexes by simple salt metathesis. The ansa complexes were fully characterized (NMR spectroscopy, UV/Vis spectroscopy, elemental analysis, and X‐ray crystallography) and further studied electrochemically and computationally. Moreover, [Ti(η⁶‐C₆H₆)₂] is found to react with the Lewis base 1,3‐dimethylimidazole‐2‐ylidene (IMe) to give the bent sandwich complex [Ti(η⁶‐C₆H₆)₂(IMe)].     

Transition‐Metal Complexes [(PMe3)2Cl2M(E)] and [(PMe3)2(CO)2M(E)] with Naked Group 14 Atoms (E=C–Sn) as Ligands; Part 1: Parent Compounds

The equilibrium geometries and bond dissociation energies of 16‐valence‐electron(VE) complexes [(PMe₃)₂Cl₂M(E)] and 18‐VE complexes [(PMe₃)₂(CO)₂M(E)] with M=Fe, Ru, Os and E=C, Si, Ge, Sn were calculated by using density functional theory at the BP86/TZ2P level. The nature of the M? E bond was analyzed with the NBO charge decomposition analysis and the EDA energy‐decomposition analysis. The theoretical results predict that the heavier Group 14 complexes [(PMe₃)₂Cl₂M(E)] and [(PMe₃)₂(CO)₂M(E)] with E=Si, Ge, Sn have C_2v equilibrium geometries in which the PMe₃ ligands are in the axial positions. The complexes have strong M? E bonds which are slightly stronger in the 16‐VE species 1ME than in the 18‐VE complexes 2ME . The calculated bond dissociation energies show that the M? E bonds become weaker in both series in the order C>Si>Ge>Sn; the bond strength increases in the order Fe<Ru<Os for 1ME , whereas a U‐shaped trend Ru<Os<Fe is found for 2ME . The M? E bonding analysis suggests that the 16‐VE complexes 1ME have two electron‐sharing bonds with σ and π symmetry and one donor–acceptor π bond like the carbon complex. Thus, the bonding situation is intermediate between a typical Fischer complex and a Schrock complex. In contrast, the 18‐VE complexes 2ME have donor–acceptor bonds, as suggested by the Dewar–Chatt–Duncanson model, with one M←E σ donor bond and two M→E π‐acceptor bonds, which are not degenerate. The shape of the frontier orbitals reveals that the HOMO?2 σ MO and the LUMO and LUMO+1 π* MOs of 1ME are very similar to the frontier orbitals of CO.     

新型的含硫族元素碳硼烷配体的三(3，5-二甲基-1-吡唑)硼氢钼配合物的合成和分子结构(英)

三齿单核三(3，5-二甲基-1-吡唑)硼氢钼配合物Tp^*Mo(O)Cl₂ (1)(Tp^*=三(3，5-二甲基-1-吡唑)硼氢HB(C₃H(Me₂)N₂)₃)与含硫族元素碳硼烷的锂盐[(THF)₂LiE₂C₂B₁₀H₁₀(THF)]<     

An Easy One‐Pot Synthesis of Diverse 2,5‐Di(2‐pyridyl)pyrroles: A Versatile Entry Point to Metal Complexes of Functionalised,Meridial and Tridentate 2,5‐Di(2‐pyridyl)pyrrolato Ligands

A wide variety of 2,5‐di(2‐pyridyl)pyrroles (dppHs) substituted at the C3 and C4 positions of the pyrrole core were obtained by direct condensation of a 2‐pyridylcarboxaldehyde (2 equiv), an α‐methylene ketone with at least one electron‐withdrawing substituent and ammonium acetate. A novel 2,5‐di(1,10‐phenanthrolin‐2‐yl)pyrrole was also characterised. The dppHs provide a direct, quick entry to dipyridylpyrrolato (dpp^?)–metal complexes. The meridial tridentate dpp^? ligand is a useful anionic analogue of the terpyridyl ligand. The first (dpp)Ru complexes are described; the 3,4‐substitution of the central pyrrole significantly perturbs the potentials of the redox processes of these complexes. A [(dpp)Ru(bpy)(MeCN)]⁺ (bpy=2,2′‐bipyridine) complex is an electrocatalyst for the reductive disproportionation of carbon dioxide to carbon monoxide and the carbonate ion.     

Hydridoborylene Complexes and Di‐, Tri‐, and Tetranuclear Borido Complexes with Hydride Ligands

Mono‐ and dinuclear hydridoborylene complexes were prepared by intermetallic borylene transfer from Group VI borylene or metalloborylene reagents. The hydride and borylene ligands were found to interact with each other significantly, although the boron ligand retains much of its former borylene character. Zero‐valent platinum fragments were successively added to the dinuclear hydridoborylene complexes, resulting in tri‐ and tetranuclear borido complexes, in which the B? H interaction has been lost, and the hydride ligands now bridge two metal centers. The complexes were studied spectroscopically, crystallographically, and by DFT methods, and the unusual bonding situation in the M? B? H triangles of hydridoborylene complexes were evaluated.     

Synthesis,Characterization, and Properties of Four Metal Complexes with Mulitdentate N‐Acyl‐Salicylhydrazide Ligands

The reactions of the new nitrilotriacetic acid N′,N′,N′‐tri(salicyloyl)trihydrazide (Ntash) with the corresponding metal salts gave four new complexes [Pb₄(bshz)₂] · 2DMF ( 1 ), [Co₂(bshz)(C₅H₅N)₆] · 2ClO₄ · (C₅H₅N) · 2H₂O ( 2 ), [Cu₃(fshz)₂(C₅H₅N)₂] ( 3 ), and [Zn₃(fshz)₂(C₅H₅N)₃]_n · 2DMF ( 4 ), in which two multidentate ligands, namely N,N′‐disalicyloylhydrazine (H₄bshz) and N‐formylsalicylhydrazide (H₃fshz) were generated in situ from Ntash. The structures of these complexes were determined by single‐crystal X‐ray diffraction analysis. Complex 1 presents a novel tetranuclear lead(II) cluster structure with the four lead(II) cations in “hemidirected” coordination spheres. The neighboring tetranuclear clusters of 1 are connected by DMF molecules through weak Pb–O bonds, forming one‐dimensional ribbons. Complexes 2 and 3 show dinuclear and linear trinuclear structures with the corresponding Co^III and Cu^II ions in distorted octahedral and square‐planar coordination environments, respectively. Complex 4 exhibits a one‐dimensional zigzag chain structure. The magnetic properties of 3 and the photoluminescent properties of 4 were also investigated.     

Synthesis,Structure, and Photophysical Properties of the Di‐ and Trinuclear Phosphine‐Diimine Complexes of Copper(I)

Reactions of [Cu(NCMe)₄]⁺ with stoichiometric amount of diphosphine R₂P–(C₆H₄)_n–PR₂, (R = NC₄H₄, n = 1; R = Ph, n = 1, 2, 3) or tri‐phosphine 1, 3, 5‐(PPh₂–C₆H₄–)₃–C₆H₃ ligands give the corresponding di‐ or trinuclear copper(I) acetonitrile‐phosphine complexes 1 – 5 . Substitution of the labile acetonitrile groups with chelating aromatic diimines – 2, 2′‐bipyridine (bpy), 1, 10‐phenanthroline (phen), 5, 6‐dimethyl‐1, 10‐phenanthroline (dmp), 5, 6‐dibromo‐1, 10‐phenanthroline (phenBr₂) – gives the corresponding substituted compounds 6 – 16 . In all complexes 1 – 16 each central Cu^I atom has tetrahedral configuration completed with two N‐ and two P‐donor groups. The compounds obtained were characterized using elemental analysis, ESI‐MS, X‐ray crystallography, and NMR spectroscopy. All phosphine‐diimine compounds 6 – 16 are photoluminescent at room temperature both in dichloromethane solution and in solid state (λ_ex = 385 nm). In CH₂Cl₂ solution the maxima of emission bands are found in a range 540–640 nm, and in solid in a similar range 538–620 nm. Emission of 6 – 16 is assigned to the triplet excited state dominated by the charge transfer transitions with contribution of the MLCT character.     

Transition‐Metal Complexes [(PMe3)2Cl2M(E)] and [(PMe3)2(CO)2M(E)] with Naked Group 14 Atoms (E=C–Sn) as Ligands; Part 2: Complexation with W(CO)5

Density functional calculations at the BP86/TZ2P level were carried out to understand the ligand properties of the 16‐valence‐electron(VE) Group 14 complexes [(PMe₃)₂Cl₂M(E)] ( 1ME ) and the 18‐VE Group 14 complexes [(PMe₃)₂(CO)₂M(E)] ( 2ME ; M=Fe, Ru, Os; E=C, Si, Ge, Sn) in complexation with W(CO)₅. Calculations were also carried out for the complexes (CO)₅W–EO. The complexes [(PMe₃)₂Cl₂M(E)] and [(PMe₃)₂(CO)₂M(E)] bind strongly to W(CO)₅ yielding the adducts 1ME–W(CO)₅ and 2ME–W(CO)₅ , which have C_2v equilibrium geometries. The bond strengths of the heavier Group 14 ligands 1ME (E=Si–Sn) are uniformly larger, by about 6–7 kcal mol^?1, than those of the respective EO ligand in (CO)₅W‐EO, while the carbon complexes 1MC–W(CO)₅ have comparable bond dissociation energies (BDE) to CO. The heavier 18‐VE ligands 2ME (E=Si–Sn) are about 23–25 kcal mol^?1 more strongly bonded than the associated EO ligand, while the BDE of 2MC is about 17–21 kcal mol^?1 larger than that of CO. Analysis of the bonding with an energy‐decomposition scheme reveals that 1ME is isolobal with EO and that the nature of the bonding in 1ME–W(CO)₅ is very similar to that in (CO)₅W–EO. The ligands 1ME are slightly weaker π acceptors than EO while the π‐acceptor strength of 2ME is even lower.     

Synthesis,Structure, and Reactivity of RuII Complexes with Trimethylsilylethinylamidinate Ligands

The mononuclear amidinate complexes [(η⁶‐cymene)‐RuCl( 1a )] ( 2 ) and [(η⁶‐C₆H₆)RuCl( 1b )] ( 3 ), with the trimethylsilyl‐ethinylamidinate ligands [Me₃SiC≡CC(N‐c‐C₆H₁₁)₂]^– ( 1a^– ) and[Me₃SiC≡CC(N‐i‐C₃H₇)₂]^– ( 1b^– ) were synthesized in high yields by salt metathesis. In addition, the related phosphane complexes[(η⁵‐C₅H₅)Ru(PPh₃)( 1b )] ( 4a ) [(η⁵‐C₅Me₅)Ru(PPh₃)( 1b )] ( 4b ), and [(η⁶‐C₆H₆)Ru(PPh₃)( 1b )](BF₄) ( 5 ‐BF₄) were prepared by ligand exchange reactions. Investigations on the removal of the trimethyl‐silyl group using [Bu₄N]F resulted in the isolation of [(η⁶‐C₆H₆)Ru(PPh₃){(N‐i‐C₃H₇)₂CC≡CH}](BF₄) ( 6 ‐BF₄) bearing a terminal alkynyl hydrogen atom, while 2 and 3 revealed to yield intricate reaction mixtures. Compounds 1a / b to 6 ‐BF₄ were characterized by multinuclear NMR (¹H, ¹³C, ³¹P) and IR spectroscopy and elemental analyses, including X‐ray diffraction analysis of 1b , 2 , and 3 .     

Two Extended 5‐Methyltetrazolate‐Based Magnetic Complexes: Synthesis,Structure, and Magnetic Properties

Two 5‐methyl‐tetrazolate (mtz^–)‐based paramagnetic metal coordination polymers, {[Cu₂(H₂O)₂(mtz)(μ₃‐OH)(nip)] · H₂O}_n ( 1 ) and [Cu(H₂O)(mtz)₂]_n ( 2 ), were obtained in the presence and absence of aromatic 5‐nitroisophathalate (nip^2–) coligand by varying the preparation methods. Structural determinations reveal that 1 is a three‐dimensional (3D) framework with corner‐sharing triangular ribbons infinitely extended by ditopic nip^2– connectors. In contrast, 2 is a coplanar (4,4) layer constructed from square‐pyramidal Cu^II ions and μ‐N1,N4‐mtz^– linkers, which is further assembled into a 3D supramolecular network by interlayer hydrogen‐bonding interactions. Magnetically, spin‐frustrated antiferromagnetic ordering is observed in the 3D framework of 1 and canted antiferromagnetic behavior with a slight spin‐flop transition is presented in 2 , which are structurally resulting from the locally Δ‐ribbon in 1 and asymmetric magnetic superexchange mediated by the μ‐N1,N4‐mtz^– bridge of 2 .     

Pyridyl Containing 1,5‐Diaza‐3,7‐diphosphacyclooctanes as Bridging Ligands for Dinuclear Copper(I) Complexes

1,5‐bis(R)‐3,7‐bis[2‐(pyridine‐2′‐yl)ethyl)‐1,5‐diaza‐3,7‐diphosphacyclooctanes 1 and 2 and their copper(I) complexes 3 and 4 were developed. The butterfly‐shaped copper‐iodide core and unusual P,N‐chelate and P,P‐bridged coordination mode of the heterocyclic ligand in the dinuclear complexes 3 and 4 were revealed. Complexes 3 and 4 display emission in green range of spectra, with lifetimes in a microsecond domain and quantum yields of luminescence in solid‐state up to 38 %. Thermochromic effects found for the phosphorescence of 4 in solutions are ascribed to rigidochromism.     

The MoMo Quintuple Bond as a Ligand to Stabilize Transition‐Metal Complexes

Herein, we report the employment of the Mo? Mo quintuple bonded amidinate complex to stabilize Group 10 metal fragments {(Et₃P)₂M} (M=Pd, Pt) and give rise to the isolation of the unprecedented δ complexes. X‐ray analysis unambiguously revealed short contacts between Pd or Pt and two Mo atoms and a slight elongation of the Mo? Mo quintuple bond in these two compounds. Computational studies show donation of the Mo? Mo quintuple‐bond δ electrons to an empty σ orbital on Pd or Pt, and back‐donation from a filled Pd or Pt d_π orbital into the Mo? Mo δ* level (LUMO), consistent with the Dewar–Chatt–Duncanson model.     

Synthesis and Characterization of Bis(pyridylimino)isoindolide Alkali Metal Complexes in Three Redox States

Non-innocent ligands (NILs) like bis(pyridylimino)isoindolide (BPI) play crucial roles in coordination chemistry, biosciences, catalysis and material sciences. Investigating the isolated redox states of NILs is inevitable for understanding their redox-activity and fine-tuning the properties of corresponding metal complexes. The limited number of fundamental studies on the coordination behavior and redox chemistry of reduced BPI species is suggested to hamper further applications of the title compounds. This work describes for the first time the isolation of alkali metal complexes of BPI and Me₂BPI in three different oxidation states and their characterization by means of NMR or EPR spectroscopy, DFT calculations, and SC-XRD studies. The latter revealed the connection between bond orders in the ligand scaffold and its oxidation state. The paramagnetic compound Me₂BPI-K₂ was isolated as a coordination copolymer with 18-crown-6, which enabled the characterization of the dianionic BPI radical. Furthermore, the so-far unknown trianionic state of BPI was reported by the isolation of BPI-K₃. This divulges an unprecedented bis(amidinato)isoindolide coordination mode.     

Synthesis of Square‐Planar Aluminum(III) Complexes

The synthesis of two four‐coordinate and square planar (SP) complexes of aluminum(III) is presented. Reaction of a phenyl‐substituted bis(imino)pyridine ligand that is reduced by two electrons, Na₂(^PhI₂P^2?), with AlCl₃ afforded five‐coordinate [(^PhI₂P^2?)Al(THF)Cl] ( 1 ). Square‐planar [(^PhI₂P^2?)AlCl] ( 2 ) was obtained by performing the same reaction in diethyl ether followed by lyphilization of 2 from benzene. The four‐coordinate geometry index for 2 , τ₄, is 0.22, where 0 would be a perfectly square‐planar molecule. The analogous aluminum hydride complex, [(^PhI₂P^2?)AlH] ( 3 ), is also square‐planar, and was characterized crystallographically and has τ₄=0.13. Both 2 and 3 are Lewis acidic and bind 2,6‐lutidine.