Synthesis and reactivity of some imidazo‐, triazolo‐ and tetrazolo‐isoquinoline derivatives

1‐Acetylirrüno‐3‐methyl‐1H‐isochromene‐4‐carbonitrile, 1 , reacts with glycine ethyl ester under basic conditions to give an imidazo[2,1‐a]isoquinoline derivative, while reaction with hydrazine hydrate in 1,4‐dioxane, with further chemistry, provides access to [1,2,4]triazolo[5,1‐a]isoquinoline, [1,2,4]triazolo[3,4‐a]isoquinoline and tetrazolo[5,1‐a]isoquinoline analogs. Benzene ring nitration and radical bromination of substituent methyl groups were investigated in the four tricycles, with some different positional reactivities being found. Two bromomethyl derivatives so produced were oxidised; ethyl 2‐bromomethyl‐6‐cyano‐5‐methylimidazo[2,1‐a]isoquinoline‐3‐carboxylate gave the anticipated ethyl 6‐cyano‐2‐formyl‐5‐methylimidazo[2,1‐a]isoquinoline‐3‐carboxylate (which reacted further with hydrazine to form a new system, 8,9‐dihydro‐6‐methyl‐8‐oxopyridazino[4′,5′:4,5]imidazo[2,1‐a]isoquinoline‐5‐carbonitrile), while 5‐bromomethyl‐2‐methyl[1,2,4]triazolo[5,1‐a]isoquinoline‐6‐carbonitrile unexpectedly gave directly another new system, 5,6‐dihydro‐5‐hydroxy‐2‐methyl‐7H‐pyrrolo[3,4‐c][1,2,4]triazolo[5,1‐a]isoquinolin‐7‐one.     

The Pseudo‐Michael Reaction of 2‐Hydrazinylidene‐1‐Arylimidazolidines with Diethyl Ethoxymethylenemalonate

The pseudo‐Michael reaction of 2‐hydrazinylidene‐1‐arylimidazolidines with diethyl ethoxymethylenemalonate (DEEM) was investigated. The reaction yields the chain adduct, namely diethyl{[2‐(1‐arylimidazolidin‐2‐ylidene)hydrazinyl]methylidene}propanedioates. This is contrary to the pseudo‐Michael reaction of DEEM with 1‐aryl‐4,5‐dihydro‐1H‐imidazol‐2‐amines that does not allow isolation of chain derivatives and leads to cyclic imidazo[1,2‐a]pyrimidine derivatives while even at thermodynamic control. At first cyclization of diethyl{[2‐(1‐arylimidazolidin‐2‐ylidene)hydrazinyl]methylidene}propanedioates leads to ethyl 1‐aryl‐5(1H,8H)oxo‐2,3‐dihydro‐imidazo[2,1‐c][1,2,4]triazepine‐6‐carboxylates. 1,5‐Sigmatropic shift, following the cyclization, caused isomerization of 5(1H,8H)oxo‐2,3‐dihydro‐imidazo[2,1‐c][1,2,4]triazepine‐6‐carboxylates to ethyl 1‐aryl‐5(1H)hydroxy‐2,3‐dihydroimidazo[2,1‐c][1,2,4]triazepine‐6‐carboxylates. Presence of both isomers in the reaction product was detected in the NMR spectra. The structure of all the compounds was confirmed with spectroscopic studies (¹H NMR and MS). The structure of diethyl{[2‐(1‐phenylimidazolidin‐2‐ylidene)hydrazinyl]methylidene}propanedioate was also confirmed by X‐ray crystallography. In the addition reaction, thermodynamics and HOMO–LUMO orbitals of the reactants were studied by using quantum chemical calculations.     

Heterocyclization reaction of 2‐(2‐methylaziridin‐1‐yl)‐3‐ureidopyridines under appel's conditions

The reaction of 2‐(2‐methylaziridin‐1‐yl)‐3‐ureidopyridines 12 with triphenylphosphine, carbon tetra‐chloride, and triethylamine (Appel's conditions) led to the corresponding carbodiimides 13 , which underwent intramolecular cycloaddition reaction with aziridine under the reaction conditions to give the pyridine‐fused heterocycles, 2,3‐dihydro‐1H‐imidazo[2′,3′:2,3]imidazo[4,5‐b]pyridines 16 and 12,13‐dihydro‐5H‐1,3 ‐benzodiazepino [2′,3′:2,3] imidazo[4,5‐b]pyridines 17 .     

Different patterns of supramolecular assembly in constitutionally similar 6‐arylimidazo[2,1‐b][1,3,4]thiadiazoles

Four imidazo[2,1‐b][1,3,4]thiadiazoles containing a simply‐substituted 6‐aryl group have been synthesized by reaction of 2‐amino‐1,3,4‐thiadiazoles with bromoacetylarenes using microwave irradiation and brief reaction times. 6‐(2‐Chlorophenyl)imidazo[2,1‐b][1,3,4]thiadiazole, C₁₀H₆ClN₃S, (I), 6‐(2‐chlorophenyl)‐2‐methylimidazo[2,1‐b][1,3,4]thiadiazole, C₁₁H₈ClN₃S, (II), 6‐(3,4‐dichlorophenyl)imidazo[2,1‐b][1,3,4]thiadiazole, C₁₀H₅Cl₂N₃S, (III), and 6‐(4‐fluoro‐3‐methoxyphenyl)‐2‐methylimidazo[2,1‐b][1,3,4]thiadiazole, C₁₂H₁₀FN₃OS, (IV), crystallize with Z′ values of 2, 1, 1 and 2 respectively. The molecular skeletons are all nearly planar and the dihedral angles between the imidazole and aryl rings are 1.51 (8) and 7.28 (8)° in (I), 9.65 (7)° in (II), 10.44 (8)° in (III), and 1.05 (8) and 7.21 (8)° in (IV). The molecules in (I) are linked by three independent C—H...N hydrogen bonds to form ribbons containing alternating R₂²(8) and R₄⁴(18) rings, and these ribbons are linked into a three‐dimensional array by three independent π‐stacking interactions. Both (II) and (III) contain centrosymmetric dimers formed by π‐stacking interactions but hydrogen bonds are absent, and the molecules of (IV) are linked into centrosymmetric R₂²(8) dimers by C—H...N hydrogen bonds. Comparisons are made with a number of related compounds.     

Imidazo[2,1‐b]thiazoles,imidazo[2,1‐b]imidazoles and Pyrrolo[1,2‐c]imidazoles. synthesis,structure and evaluation of benzodiazepine receptor binding

As a continuation of our studies on bicyclic heterocycles with benzodiazepine receptor affinity, derivatives with a 5:5 bicyclic skeleton, namely imidazo[2,1‐b]thiazoles, imidazo[2,1‐b]imidazoles and pyrrolo[1,2‐c]imidazoles were prepared. The compounds possessed an aromatic substituent with different spatial arrangement and distance to the bicyclic skeleton. X‐ray structure analysis was performed for Z‐2‐(4‐chlorobenzylidene)‐5,5‐diphenyl‐2,3,5,6‐tetrahydroimidazo[2,1‐b]imidazoline‐3,6‐dione ( 6a ) and 5‐amino‐6‐cyano‐7‐phenyl‐1‐oxo‐3‐thioxo‐2,3‐dihydro‐1H‐pyrrolo[1,2‐c]imidazole ( 20a ). In contrast to the previously described arylideneimidazo[2,1‐b]thiazepinones the smaller heterocyclic ring systems investigated in this study were devoid of meaningful benzodiazepine receptor affinity as well as anti‐convulsant activity.     

Synthesis of 2‐imino‐7‐methyl‐2,3‐dihydroimidazo[1,2‐a]‐pyrimidin‐5(1H)‐ones and their reactions with nucleophiles

[2‐Alkylthio‐6‐methyl‐4‐oxopyrimidin‐3(4H)‐yl]acetonitriles ( 3‐5 ) treated with sodium methoxide in methanol followed by ammonium chloride were cyclized to 2‐imino‐7‐methyl‐2,3‐dihydroimidazo[1,2‐a]‐pyrimidin‐5(1H)‐ones ( 6‐8 ). Under acid or base‐catalyzed hydrolysis they were converted to 7‐methyl‐imidazo[1,2‐a]pyrimidine‐2,5‐[1H,3H]‐diones ( 9‐11 ), whereas in the reaction with butyl‐ or benzylamine the corresponding 7‐methyl‐2‐(substitutedamino)imidazo[1,2‐a]pyrimidin‐5(3H)‐ones ( 13‐18 ) were produced. The latter were found to exist in two tautomeric forms in CDCl₃ solution.     

Synthesis of new functionalized imidazo[2,1‐b]thiazoles and thiazolo[3,2‐a]pyrimidines

5‐Oxo‐5H‐[1,3]thiazolo[3,2‐a]pyrimidine‐6‐carboxylic acid ( 4 ), and 6‐methylimidazo[2,1‐b]thiazole‐5‐carboxylic acid ( 17 ) were reacted with amines 6a‐i by the reaction with oxalyl chloride and N, N‐di methyl‐formamide as a catalyst into primary and secondary amide derivatives 7‐14 and 19‐22. From compound 24 N,N'‐disubstituted ureas 26, 27 and perhydroimidazo[1,5‐c]thiazole 29 derivatives of imidazo[2,1‐b]thiazole were prepared. By nmr analysis of compound 29 , the existence of two stereoisomers resulting from both optical, due to centre of chirality at C7′a, and conformational isomerism, due to restricted C5? N6′ bond rotation were proved.     

A new approach for the synthesis of some pyrazolo[5,1‐c]triazines and pyrazolo[1,5‐a]pyrimidines containing naphtofuran moiety

Naphtho[2,1‐b]furan‐2‐yl)(8‐phenylpyrazolo[5,1‐c][1,2,4]triazin‐3‐yl)methanone, ([1,2,4]triazolo[3,4‐c][1,2,4]triazin‐6‐yl)(naphtho[2,1‐b]furan‐2‐yl)methanone, benzo[4,5]imidazo[2,1‐c][1,2,4]triazin‐3‐yl‐naphtho[2,1‐b]furan‐2‐yl‐methanone, 5‐(naphtho[2,1‐b]furan‐2‐yl)pyrazolo[1,5‐a]pyrimidine, 7‐(naphtho[2,1‐b]furan‐2‐yl)‐[1,2,4]triazolo[4,3‐a]pyrimidine, 2‐naphtho[2,1‐b]furan‐2‐yl‐benzo[4,5]imidazo[1,2‐a]pyrimidine, pyridine, and pyrazole derivatives are synthesized from sodium salt of 5‐hydroxy‐1‐naphtho[2,1‐b]furan‐2‐ylpropenone and various reagents. The newly synthesized compounds were elucidated by elemental analysis, spectral data, chemical transformation, and alternative synthetic route whenever possible. J. Heterocyclic Chem., (2012).     

Synthesis of Imidazo[2,1‐a]isoquinolines from α‐Tosyloxyketones and 1‐Aminoisoquinoline in Ionic Liquid Solvent

The room temperature ionic liquid n‐butylpyridinium tetrafluoroborate (BPyBF₄) is used as a ‘green’ recyclable alternative to classical molecular solvents for the cyclocondensation of α‐tosyloxyketones with 1‐aminoisoquinoline to prepare imidazo[2,1‐a]isoquinolines in good yields.     

Synthesis of a Novel Triheterocyclic Framework via 1,3‐Dipolar Cycloaddition of a Nitrile Oxide with Imidazo[2,1‐b][1,3]thiazole‐3(2H)‐ones

A novel series of (9Z)‐9‐arylmethylidene‐3‐(2,6‐dichlorophenyl)‐5,6‐dihydro[1,3]thiazolo[2′,3′:2,3]imidazo [1,2‐d][1,2,4]oxadiazol‐8(9H)‐one derivatives were prepared in moderate yields by the 1,3‐dipolar cycloaddition reaction of a nitrile oxide with (2Z)‐2‐arylmethylidene‐5,6‐dihydroimidazo [2,1‐b][1,3]thiazol‐3(2H)‐ones. The reaction site of the dipolarphile is the C═N of imidazo[2,1‐b][1,3]thiazole rather than the expected C═C of the arylmethylidene. The product structures were characterized thoroughly by IR, MS, NMR spectroscopy, and elemental analysis. The results indicate that this reaction proceeds with chemoselectivity and regioselectivity.     

Reactivity of (2‐methylsulfanyl‐4‐oxo‐6‐phenyl‐4h‐pyrimidin‐3‐yl)‐acetic acid methyl ester towards hydrazine hydrate and benzylamine

The title ester 1 reacted with hydrazine hydrate to give hydrazide 2 , which underwent intramolecular cyclization to yield 1‐amino‐7‐phenyl‐1H‐imidazo[1,2‐a]pyrimidine‐2,5‐dione ( 3 ) or took place in a substitution reaction with benzylamine to form N‐benzyl‐2‐(2‐benzylamino‐4‐oxo‐6‐phenyl‐4H‐pyrimidin‐3‐yl)‐acetamide ( 4 ). The reaction of ester 1 with benzylamine gave corresponding amide 7 , disubstituted derivative 4 or 1‐benzyl‐7‐phenyl‐1H‐imidazo[1,2‐a]pyrimidine‐2,5‐dione ( 8 ) depending on the reaction conditions.     

Synthesis of Some New Fused and Binary 1,3,4‐Thiadiazoles as Potential Antitumor and Antioxidant Agents

Annulations of 2‐amino‐1,3,4‐thiadiazole ( 1 ) with α,β‐unsaturated carbonyl compounds 2 , 5 , and 9 afforded thiadiazolo[3,2‐a]pyrimidin 3 , benzamide 7 , and bis‐pyrazole derivative 11 . Cyclization of benzamide 7 with POCl₃ gave binary imidazole derivative 8 . Moreover, alkylation of 1 with 2‐bromo‐1‐(2H‐chromen‐3‐yl) ethanone ( 9 ) followed by cyclization gave imidazo[2,1‐b]‐1,3,4‐thiadiazole derivative 15 . Multicomponent reaction of 1 with heterocyclic and/or aromatic aldehyde and thioglycolic acid afforded the corresponding thiazolidinones 17 and 19 . Finally, a one‐pot synthesis of 1 with isatin and thiosemicarbazide furnished the spirotriazole 20 . The newly synthesized compounds were evaluated as antitumor agents.     

Synthesis of 1R‐1H‐Imidazo[1,2‐a]pyridin‐4‐ium‐8‐olate Derivatives

A new method based on reaction of 4‐bromobut‐2‐enoates with N‐alkylimidazoles was proposed for obtaining 1R‐1H‐imidazo[1,2‐a]pyridin‐4‐ium‐8‐olate and 1‐R‐8‐methoxy‐1H‐imidazo[1,2‐a]pyridin‐4‐ium derivatives. The structures of synthesized compounds were confirmed by ¹H, ¹³C NMR, elemental analysis, and X‐ray data.     

2‐(4‐Bromophenyl)‐1,2‐dihydropyrimido[1,2‐a]benzimidazol‐4(3H)‐one and 4‐(4‐methylphenyl)‐3,4‐dihydropyrimido[1,2‐a]benzimidazol‐2(1H)‐one form hydrogen‐bonded base‐paired dimers

The title compounds, 2‐(4‐bromo­phenyl)‐1,2‐di­hydro­pyrimido­[1,2‐a]­benzimidazol‐4‐(3H)‐one, C₁₆H₁₂Br­N₃O, (IVa), and 4‐(4‐methylphenyl)‐3,4‐dihydropyrimido[1,2‐a]benzimidazol‐2‐(1H)‐one, C₁₇H₁₅N₃O, (Vb), both form R(8) centrosymmetric dimers via N—H?N hydrogen bonds. The N?N distance is 2.943 (3) Å for (IVa) and 2.8481 (16) Å for (Vb), with the corresponding N—H?N angles being 129 and 167°, respectively. However, in other respects, the supra­molecular structures of the two compounds differ. Both compounds contain different C—H?π interactions, in which the C—H?π(centroid) distances are 2.59 and 2.47 Å for (IVa) and (Vb), respectively (the latter being a short distance), with C—H?π(centroid) angles of 158 and 159°, respectively. The supramolecular structures also differ, with a short Br?O distance of 3.117 (2) Å in bromo derivative (IVa), and a C—H?O interaction with a C?O distance of 3.2561 (19) Å and a C—H?O angle of 127° in tolyl system (Vb). The di­hydro­pyrimido part of (Vb) is disordered, with a ratio of the major and minor components of 0.9:0.1. The disorder consists of two non‐interchangeable envelope conformers, each with an equatorial tolyl group and an axial methine H atom.     

Pd‐Catalyzed Cyclocarbonylation of 2‐(2‐Bromoaryl)indoles with CO as a C1 Source: Selective Access to 6 H‐Isoindolo[2,1‐a]indol‐6‐ones and Indeno[1,2‐b]indol‐10(5 H)‐ones

A highly efficient and regioselective synthetic route to 6 H‐isoindolo[2,1‐a]indol‐6‐ones and indeno[1,2‐b]indol‐10(5 H)‐ones through the Pd‐catalyzed cyclocarbonylation of 2‐(2‐bromoaryl)indoles under atmospheric CO pressure has been achieved. Notably, the regioselectivity of the reaction was exclusively dependent on the structural characteristics of the indole substrates. With N‐unsubstituted indoles as the starting materials, the reaction afforded 6H‐isoindolo[2,1‐a]indol‐6‐ones in good‐to‐excellent yields. On the other hand, with N‐substituted indoles as the substrates, the reaction gave indeno[1,2‐b]indol‐10(5 H)‐ones in a highly regioselective manner.     

An Efficient One‐Pot Four‐Component Synthesis of Some New Spirooxindole Dihydropyridine Using Alum as a Heterogeneous Green Catalyst

4‐Nitro‐2,3‐dihydrospiro[imidazo[1,2‐a ]indeno[2,1‐e ]pyridine‐5,3′‐indoline]‐2′,6(1H )‐dione derivatives have been synthesized in good yields in a one‐pot four‐component, and efficient process by reaction of corresponding isatins, 1,3‐indandione, diamine, and nitro ketene dithioacetal in the presence of KAl(SO₄)₂.12H₂O (Alum) as a nontoxic and easily available heterogeneous green catalyst.     

Synthesis of 6‐Aminoindolo[2,1‐a]isoquinoline‐5‐carbonitriles by the Cu‐Catalyzed Reaction of 2‐(2‐Bromophenyl)‐1H‐indoles with CH2(CN)2

A series of 6‐aminoindolo[2,1‐a]isoquinoline‐5‐carbonitriles 4 have been prepared by treatment of 2‐(2‐bromophenyl)‐1H‐indoles 1 , available from 1‐(2‐bromophenyl)ethanones or 1‐(2‐bromophenyl)propan‐1‐ones by using Fischer indole synthesis, with propanedinitrile in the presence of a catalytic amount of CuBr and an excess of K₂CO₃ in DMSO at 100°.     

Methyl 2‐benzamido‐4‐(3,4‐dimethoxyphenyl)‐5‐methylbenzoate and N‐{5‐benzoyl‐2‐[(Z)‐2‐methoxyethenyl]‐4‐methylphenyl}benzamide

Methyl 2‐benzamido‐4‐(3,4‐dimethoxyphenyl)‐5‐methylbenzoate, C₂₄H₂₃NO₅, (Ia), and N‐{5‐benzoyl‐2‐[(Z)‐2‐methoxyethenyl]‐4‐methylphenyl}benzamide, C₂₄H₂₁NO₃, (IIa), were formed via a Diels–Alder reaction of appropriately substituted 2H‐pyran‐2‐ones and methyl propiolate or (Z)‐1‐methoxybut‐1‐en‐3‐yne, respectively. Each of these cycloadditions might yield two different regioisomers, but just one was obtained in each case. In (Ia), an intramolecular N—H...O hydrogen bond closes a six‐membered ring. A chain is formed due to aromatic π–π interactions, and a three‐dimensional framework structure is formed by a combination of C—H...O and C—H...π(arene) hydrogen bonds. Compound (IIa) was formed not only regioselectively but also chemoselectively, with just the triple bond reacting and the double bond remaining unchanged. Compound (IIa) crystallizes as N—H...O hydrogen‐bonded dimers stabilized by aromatic π–π interactions. Dimers of (IIa) are connected into a chain by weak C—H...π(arene) interactions.     

Efficient Synthesis of Pyrrolo[2,1‐a]isoquinoline and Pyrrolo[1,2‐a]quinoline Derivatives via One‐pot Two‐step Metal‐catalyzed Three‐component Reactions

A sequential one‐pot two‐step reaction for efficient synthesis of pyrrolo[2,1‐a]isoquinoline and pyrrolo[1,2‐a]quinoline derivatives in good yields has been successfully developed. The reaction included firstly Cu‐catalyzed three‐component reaction of isoquinoline (quinoline), acetylenedicarboxylate and alkynylbenzene and then Pd‐catalyzed intramolecular C(sp)‐C(sp²) coupling reaction of initially formed 1‐alkenyl‐2‐alkynyl‐1,2‐dihydroisoquinoline (1,2‐dihydroquinoline).     

An optically pure P–alkene‐ligated IrI complex

The asymmetric unit of (P)‐chloridobis[(S)‐(+)‐5‐(3,5‐dioxa‐4‐phosphacyclohepta[2,1‐a:3,4‐a′]dinaphthalen‐4‐yl)dibenz[b,f]azepine]iridium(I)–benzene–pentane (1/1/1), [IrCl(C₃₄H₂₂NO₂P)₂]·C₆H₆·C₅H₁₂, contains two formula units. The two symmetry‐independent molecules of the Ir complex have similar conformations and approximate C₂ symmetry, with small deviations arising from slightly different puckering of the seven‐membered dioxaphosphacycloheptadiene rings. The Ir atoms have trigonal–bipyramidal coordination geometry, with the P atoms in axial positions. The steric strain of the bidentate coordination of the P–alkene ligand through its P and alkene C atoms causes the N atom to have pyramidal geometry, compared with the trigonal–planar geometry observed in the free ligand. The coordination also results in an anti conformation of the binaphthyl and alkene groups within the P–alkene ligand.