Enantioselective Synthesis of N–C Axially Chiral Compounds by Cu‐Catalyzed Atroposelective Aryl Amination

N?C axially chiral compounds have emerged recently as appealing motifs for drug design. However, the enantioselective synthesis of such molecules is still poorly developed and surprisingly no metal‐catalyzed atroposelective N‐arylations have been described. Herein, we disclose an unprecedented Cu‐catalyzed atroposelective N?C coupling that proceeds at room temperature. Such mild reaction conditions, which are a crucial parameter for atropostability of the newly generated products, are operative thanks to the use of hypervalent iodine reagents as a highly reactive coupling partners. A large panel of the N?C axially chiral compounds was afforded with very high enantioselectivity (up to >99 % ee) and good yields (up to 76 %). Post‐modifications of thus accessed atropisomeric compounds allows further expansion of the diversity of these appealing compounds.     

Diazo Strategy for the Synthesis of Pyridazines: Pivotal Impact of the Configuration of the Diazo Precursor on the Process

Phosphazenes of vinyldiazocarbonyl compounds having cis stereochemistry of the functional groups on the vinyl bond readily produce pyridazines by a diaza‐Wittig process, whereas their counterparts with trans configuration remain intact under similar reaction conditions. Upon UV irradiation trans‐phosphazenes furnish pyridazines through a tandem trans‐to‐cis isomerization followed by intramolecular cyclization. At elevated temperatures trans‐(triphenyl)phosphazenes dissociate to give the initial vinyldiazo compounds, which produce pyrazoles in high yields. The first theoretical study on the mechanism of the diaza‐Wittig process by DFT calculations at the M06‐2X/6‐31G(d) level of theory suggest that for the cis‐phosphazenes a rapid tandem [2+2] cycloaddition/cycloelimination process with low energy barriers is preferred over trans isomers.     

Photochemical Study of Chalconoid‐like Compounds: Synthesis of 4‐Flavanoids

The photo‐irradiation of chalconoid‐like compounds; (2E,4E)‐1‐(2‐hydroxyaryl)‐4‐methyl‐5‐phenylpenta‐2,4‐dien‐1‐ones to 4‐flavanoids in solution phase has been described. The molecular scaffold of the probed substrates is responsive to intramolecular cyclization as well as cis‐trans isomerizations and photoproducts corresponding to both of reactions have been realized also. The formation of photoproducts has been explained on the basis of excited state intramolecular proton transfer that further depends upon the different substituents present on the phenolic moiety.     

Direct Arylation of Benzene with Aryl Bromides using High‐Temperature/High‐Pressure Process Windows: Expanding the Scope of C?H Activation Chemistry

A detailed investigation on the direct arylation of benzene with aryl bromides by using first‐row transition metals under high‐temperature/high‐pressure (high‐T/p) conditions is described. By employing a parallel reactor platform for rapid reaction screening and discovery at elevated temperatures, various metal/ligand/base combinations were evaluated for their ability to enable biaryl formation through C? H activation. The combination of cobalt(III) acetylacetonate and lithium bis(trimethylsilyl)amide was subjected to further process intensification at 200 °C (15 bar), allowing a significant reduction of the catalyst/base loading and a dramatic increase in catalytic efficiency (turnover frequency) by a factor of 1000 compared to traditional protocols. The high‐throughput screening additionally identified novel nickel‐ and copper‐based metal/ligand combinations that favored an amination pathway competing with C? H activation, with the addition of ligands, such as 1,10‐phenanthroline, having a profound influence on the selectivity. In addition to metal‐based catalysts, high‐T/p process windows were also successfully applied to transition‐metal‐free systems, utilizing 1,10‐phenanthroline as organocatalyst.     

UV‐Resistant Actinobacteria from High‐Altitude Andean Lakes: Isolation,Characterization and Antagonistic Activities

Polyextremophiles are present in a wide variety of extreme environments in which they must overcome various hostile conditions simultaneously such as high UVB radiation, extreme pHs and temperatures, elevated salt and heavy‐metal concentration, low‐oxygen pressure and scarce nutrients. High‐altitude Andean lakes (HAALs; between 2000 and 4000 m) are one example of these kinds of ecosystems suffering from the highest total solar and UVB radiation on Earth where an abundant and diverse polyextremophilic microbiota was reported. In this work, we performed the first extensive isolation of UV‐resistant actinobacteria from soils, water, sediments and modern stromatolites at HAALs. Based on the 16S rRNA sequence, the strains were identified as members of the genera Streptomyces, Micrococcus, Nesterenkonia, Rhodococcus, Microbacterium, Kocuria, Arthrobacter, Micromonospora, Blastococcus, Citrococcus and Brevibacterium. Most isolates displayed resistance to multiple environmental stress factors confirming their polyextremophilic nature and were able to produce effective antimicrobial compounds. HAALs constitute a largely unexplored repository of UV‐resistant actinobacteria, with high potential for the biodiscovery of novel natural products.     

A High Pressure Study on NH4Pb2Br5 Type Compounds Part II: Electronic Structure and Changes under High Pressure

In this work, we present a theoretical study (based on DFT‐calculations) of the electronic properties of compounds crystallising in a NH₄Pb₂Br₅ type structure in a wide pressure range. The main focus of this study is to elucidate the nature of bonding of the ns²‐cations at ambient and elevated pressure. For a better understanding of the structure and bonding, the DOS of these compounds are evaluated and discussed on the basis of a simple model assuming mainly ionic interactions. The calculations are complemented by an orbital analysis using the crystal orbital Hamilton population (COHP) and an analysis of the electronic density topology with the electron localisation function (ELF). Structural and theoretical investigations give results that are in excellent agreement: The DFT‐calculations confirm the existence of bonding interactions between the ns²‐cations at elevated pressure. Our study indicates that the “character” of the additional electron pair changes with increasing pressure from nonbonding to bonding in agreement with a simple model system of two interacting ns²‐cations.     

Tailoring of Three‐Phase Crystalline Systems in Isotactic Poly(propylene)

Summary: A novel method for the tailoring of unique three‐phase crystalline systems in isotactic poly(propylene) has been proven. It is based on a synergistic application of a specific β‐nucleating agent and high pressure during crystallization. The formation of a γ phase was supported by elevated pressure and high temperature during crystallization; under these conditions the growth of both β and α phases was significantly suppressed. Nevertheless, during the course of crystallization at lower pressure and/or lower temperatures, strong β‐nucleation efficiency favored the formation of a β phase.

     

High pressure ethylene polymerization with a post‐metallocene bis‐phenyl phenoxy catalyst

The use of post‐metallocene bis‐phenylphenoxy catalysts to polymerize ethylene under high ethylene pressures (>25,000 psi) results in some remarkable catalytic properties. The high ethylene pressure produces molar ethylene concentrations in the reactor as much as 40 times higher than in typical low pressure ethylene polymerizations. This high ethylene concentration results in high catalyst efficiency at high temperatures and low reactor residence time, between 180 °C and 240 °C the catalyst efficiency surprisingly increases with increasing temperature, allowing for use of these catalysts at temperatures much higher than can be utilized in the low pressure processes. It has further been demonstrated that under these conditions increasing hydrogen levels up to 0.5 mol% does not significantly affect the polymer molecular weight; however, polymer molecular weight control can be realized with varying reactor temperature. The polymer produced is shown to be high density polyethylene made from a single site catalyst and not free radical initiated low density polymer. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 861–866     

High temperature creep behavior of phosphoric acid‐polybenzimidazole gel membranes

This work investigates the effects of polymer solids content and macromolecular structure on the high temperature creep behavior of polybenzimidazole (PBI) gel membranes imbibed with phosphoric acid (PA) after preparation via a polyphosphoric acid (PPA) mediated sol‐gel process Low‐solids, highly acid‐doped PBI membranes demonstrate outstanding fuel cell performance under anhydrous, ambient pressure, and high temperature (120–200 °C) operating conditions. However, PBI membranes are susceptible to creep under compressive loads at elevated temperatures, so their long‐term mechanical durability is a major concern. Here, we report results for the creep behavior of PBI membranes subject to compression at 180 °C. For para‐ and meta‐PBI homopolymers, increasing polymer solids content results in lower creep compliance and higher extensional viscosity, which may be rationalized by increasing chain density in the sol‐gel network. Comparing various homo‐ and copolymers at similar solids loading, differences in creep behavior may be rationalized in terms of chain–chain and chain‐solvent interactions that control macromolecular solubility and stiffness in the PA solvent. The results demonstrate the feasibility of improving the mechanical properties of PA‐doped PBI membranes by control of polymer solids content and rational design of PBI macromolecular structure. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1527–1538     

Crystal Structure of the T(6‐4)C Lesion in Complex with a (6‐4) DNA Photolyase and Repair of UV‐Induced (6‐4) and Dewar Photolesions

UV‐light irradiation induces the formation of highly mutagenic lesions in DNA, such as cis‐syn cyclobutane pyrimidine dimers (CPD photoproducts), pyrimidine(6‐4)pyrimidone photoproducts ((6‐4) photoproducts) and their Dewar valence isomers ((Dew) photoproducts). Here we describe the synthesis of defined DNA strands containing these lesions by direct irradiation. We show that all lesions are efficiently repaired except for the T(Dew)T lesion, which cannot be cleaved by the repair enzyme under our conditions. A crystal structure of a T(6‐4)C lesion containing DNA duplex in complex with the (6‐4) photolyase from Drosophila melanogaster provides insight into the molecular recognition event of a cytosine derived photolesion for the first time. In light of the previously postulated repair mechanism, which involves rearrangement of the (6‐4) lesions into strained four‐membered ring repair intermediates, it is surprising that the not rearranged T(6‐4)C lesion is observed in the active site. The structure, therefore, provides additional support for the newly postulated repair mechanism that avoids this rearrangement step and argues for a direct electron injection into the lesion as the first step of the repair reaction performed by (6‐4) DNA photolyases.     

On the performance of thermostable electrowetting agents

Electrowetting of ionic liquids (ILs) in different alkane ambient and at different temperatures were studied under different AC voltages. The performance of IL‐based electrowetting at elevated temperatures and that at room temperature was compared. It turns out that the electrowetting of ILs at elevated temperatures resulted in faster response and lower operation voltage. Furthermore, the relationship between the structure of the ion and the contact angle change was specifically investigated and theoretically explained. Finally, the properties of IL‐based electrowetting in different alkane ambient were studied. It was demonstrated that the long length of the alkyl chain guaranteed a smaller contact angle under the same applied voltage. All the experimental results showed attractive features involving wide operating temperatures and in particular high stability, fast response, and good reversibility at elevated temperatures. The performance of IL‐based electrowetting could be further improved through an optimal choice of an ambient phase or a rational design and synthesis of ionic liquids. Copyright © 2011 John Wiley & Sons, Ltd.     

Photolysis of α,β‐Epoxyketones: A Green Synthesis of β‐Hydroxyenones through Tandem H‐Abstraction,Ring Cleavage and Isomerisation

The photochemical behavior of various substituted epoxycarbonyl compounds consisting of more than one possible photo‐labile site (i.e. δ‐hydrogen, β‐hydrogen and epoxide ring) has been investigated. These compounds on photo‐irradiation produced the β‐hydroxyenones in an eco‐friendly green approach. Mechanistically, these photo‐transformations have been envisaged to occur via an intramolecular β‐hydrogen abstraction by the carbonyl group of benzoyl moiety to generate the 1,3‐biradical followed by epoxide ring opening that isomerizes into the photoproducts. The photolysis of the probed epoxy ketones didn’t furnish any photoproduct through δ‐hydrogen abstraction, whatsoever. This exclusive preference for β‐H abstraction over δ‐H abstraction by carbonyl group has been vindicated by the MM2 energy mini‐ mized program for the investigated photochemical substrates. The structures of these photoproducts were established from the analysis of their spectral parameters (IR, ¹H/¹³C NMR and Mass) and single crystal X‐ray crystallography data.     

Enantioselective Organo‐Photocatalysis Mediated by Atropisomeric Thiourea Derivatives

Can photocatalysis be performed without electron or energy transfer? To address this, organo‐photocatalysts that are based on atropisomeric thioureas and display lower excited‐state energies than the reactive substrates have been developed. These photocatalysts were found to be efficient in promoting the [2+2] photocycloaddition of 4‐alkenyl‐substituted coumarins, which led to the corresponding products with high enantioselectivity (77–96 % ee) at low catalyst loading (1–10 mol %). The photocatalytic cycle proceeds by energy sharing via the formation of both static and dynamic complexes (exciplex formation), which is aided by hydrogen bonding.     

Ritter Reaction of 1‐Aryl‐1‐Fluoro‐2‐Haloethanes

Fluorinated phenethyl bromides 1,2 , and 3 , prove to be totally inert under Ritter reaction conditions in the presence of either SnCl₄ or AgNO₃, due to the strong deactivation by the gem‐difluoro unit. Subjecting 2‐bromo‐1‐fluoro‐1‐phenylethane to SnCl₄ in MeCN at elevated temperatures led to formation of 2‐methyl‐4‐phenyl‐4,5‐dihydrooxazole.     

Exclusion effect of carbon dioxide on the crystallization of polypropylene

We investigated the crystallization growth of isotactic polypropylene under carbon dioxide (CO₂) at various CO₂ pressures and temperatures by in situ observation with a digital high‐fidelity microscope and a specially designed high‐pressure visualized cell. The fibrils within the spherulite were distorted and branched by crystallization under CO₂ at pressures higher than 2 MPa, and this suggested the exclusion of CO₂ from the growth front of the fibrils. The spherulite growth rate (G) at 140 °C increased with the CO₂ pressure, attained a maximum value around 0.3 MPa, and then decreased. Above 6 MPa, it became slower than that under air at the ambient pressure. An analysis of the crystallization kinetics by the Hoffman–Lauritzen theory revealed that the pressure dependence of G could be ascribed to the change in the transportation rate of crystallizable molecules (β_g) with pressure; that is, β_g increased and then decreased with pressure. The increase in β_g at a low pressure was caused by the plasticizing effect of CO₂, whereas the decrease in β_g at a high pressure was due to the exclusion of CO₂ from the crystal growth front. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1565–1572, 2004     

Optimization of the HPLC enantioseparation of 3,3′‐dibromo‐5,5′‐disubstituted‐4,4′‐bipyridines using immobilized polysaccharide‐based chiral stationary phases

The HPLC enantioseparation of nine atropisomeric 3,3′,5,5′‐tetrasubstituted‐4,4′‐bipyridines was performed in normal and polar organic (PO) phase modes using two immobilized polysaccharide‐based chiral columns, namely, Chiralpak IA and Chiralpak IC. The separation of all racemic analytes, the effect of the chiral selector, and mobile phase (MP) composition on enantioseparation and the enantiomer elution order (EEO) were studied. The beneficial effect of nonstandard solvents, such as tetrahydrofuran (THF), dichloromethane (DCM), and methyl t‐butyl ether on enantioseparation was investigated. All selected 4,4′‐bipyridines were successfully enantioseparated on Chiralpak IA under normal or PO MPs with separation factors from 1.14 to 1.70 and resolutions from 1.3 to 6.5. Two bipyridines were enantioseparated at the multimilligram level on Chiralpak IA. Differently, Chiralpak IC was less versatile toward the considered class of compounds and only five bipyridines out of nine could be efficiently separated. In particular, on these columns, the ternary mixture n‐heptane/THF/DCM (90:5:5) as MP had a positive effect on enantioseparation. An interesting phenomenon of reversal of the EEO depending on the composition of the MP for the 3,3′‐dibromo‐5,5′‐bis‐(E)‐phenylethenyl‐4,4′‐bipyridine along with an exceptional enantioseparation for the 3,3′‐dibromo‐5,5′‐bis‐ferrocenylethynyl‐4,4′‐bipyridine (α = 8.33, R_s = 30.6) were observed on Chiralpak IC.     

Dielectric relaxation behavior of poly(methyl methacrylate) under high‐pressure carbon dioxide

An in situ dielectric measurement for atactic poly(methyl methacrylate) (at‐PMMA) was performed under high‐pressure CO₂ under various pressures and temperatures. The at‐PMMA has the acetate side group with a large dipole moment. In the glassy state, a local relaxation process (β‐process) can be observed using dielectric measurement. In the rubbery state, the micro‐Brownian motion of main chain (α‐process) occurs, and the β‐process changes into αβ‐process coordinated with the α‐process. The dielectric loss (ε″) spectrum of at‐PMMA in the glassy state is asymmetric because of the density fluctuation for the amorphous structure. The loss peak frequency shifted to higher frequencies, and the relaxation strength increased with increasing CO₂ pressure. In the glassy state, the shape of ε″ spectrum became more symmetric with increasing CO₂ pressure. These show that the molecular mobility enhanced by the plasticization effect of CO₂ allows the dipolar side groups in the high‐density region to contribute to the relaxation process. We also found that the apparent activation energy decreased under high‐pressure CO₂. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2951–2962, 2005     

Rapid synthesis of 2,5‐disubtituted 1,3,4‐thiadiazoles under microwave irradiation

The one pot, three‐components condensation of aromatic aldehydes, hydrazine and sulfur in ethanol under microwave irradiation provided symmetrically 3,5‐disubstituted 1,3,4‐thiadiazoles in high yields and good purity. This reaction must be conducted under pressure of hydrogen sulfide produced in‐situ. The structure of the compounds was confirmed by ¹H, ¹³C NMR, MS and elemental analysis.     

Enantioselective Synthesis of N–C Axially Chiral Compounds by Cu-Catalyzed Atroposelective Aryl Amination

N−C axially chiral compounds have emerged recently as appealing motifs for drug design. However, the enantioselective synthesis of such molecules is still poorly developed and surprisingly no metal-catalyzed atroposelective N-arylations have been described. Herein, we disclose an unprecedented Cu-catalyzed atroposelective N−C coupling that proceeds at room temperature. Such mild reaction conditions, which are a crucial parameter for atropostability of the newly generated products, are operative thanks to the use of hypervalent iodine reagents as a highly reactive coupling partners. A large panel of the N−C axially chiral compounds was afforded with very high enantioselectivity (up to >99 % ee) and good yields (up to 76 %). Post-modifications of thus accessed atropisomeric compounds allows further expansion of the diversity of these appealing compounds.     

Phase behaviour of three homologues of the discotic hexa‐n‐alkoxyanthraquinones under pressure

The phase transition behaviour of three homologous discotic mesogens, the hexa‐n‐alkoxyanthraquinones HOAQ(n), n indicating the number of carbon atoms in the alkoxy group, was investigated under hydrostatic pressures up to 500?MPa using a high pressure differential thermal analyser. The T vs. P phase diagrams of HOAQ(6), HOAQ(8) and HOAQ(9) were constructed for solution‐ (Cr₀) and melt‐crystallized (Cr₁) samples of the compounds. HOAQ(6) shows the reversible Cr₀–rectangular columnar phase (Col_r)–hexagonal columnar phase (Col_h)–isotropic liquid (I) phase sequence at atmospheric pressure. The stable Col_r phase of HOAQ(6) has a decreased temperature range with increasing pressure and then the Col_r phase disappears under pressures above about 350?MPa; instead the Cr₀–Col_h–I phase sequence is exhibited. For HOAQ(8), the solution‐grown sample exhibits the stable Cr₀–Col_h–I phase sequence at atmospheric pressure. Applying pressure to the solution‐grown sample induces the formation of the stable Col_r phase in the pressure region between 10 and 350?MPa, leading to the Cr₀–Col_r–Col_h–I phase sequence. The pressure‐induced Col_r phase disappears under higher pressures. The melt‐cooled sample of HOAQ(8) shows the formation of the metastable crystal (Cr₁), unknown mesophase (X) and Col_r phases at lower temperatures under atmospheric pressure, and exhibits the reversible Cr₁–X–Col_r–Col_h–I phase sequence on subsequent thermal cycles. The metastable phase sequence was observed under pressures up to 100?MPa, but the phase transitions were too small to be detected under higher pressures. In HOAQ(9) the stable Cr₀–Col_h–I phase sequence is observed at all pressures, while the melt‐cooled sample shows the metastable Cr₁–Col_r–Col_h–I phase sequence under pressures up to 300?MPa. The metastable Col_r phase disappears under higher pressures.