Fast Removal and Recovery of Methylene Blue by Activated Carbon Modified with Magnetic Iron Oxide Nanoparticles

A magnetic adsorbent was synthesized by modification of activated carbons with magnetic iron oxide nanoparticles (AC‐MIONs). The preparation method is fast and could be carried out in an ordinary condition. The AC‐MIONs were used as quite efficient adsorbents for separation of methylene blue (MB) from aqueous solution in a batch process. The effect of different parameters such as pH, temperature, electrolyte concentration, contact time and interfering ions on the removal of MB were studied. The adsorption data were analyzed by Langmuir and Freundlich isotherm models and a maximum adsorption amount of 47.62 mg g^‐1 and a langmuir adsorption equilibrium constant of 3.0 L mg^‐1 were obtained. The obtained results revealed that AC‐MIONs were effective adsorbents for fast removal of MB from different aqueous solutions. This adsorbent was successfully used for removal of MB from Karoon River water.     

Synthesis,Bifunctionalization, and Remarkable Adsorption Performance of Benzene‐Bridged Periodic Mesoporous Organosilicas Functionalized with High Loadings of Carboxylic Acids

Highly ordered benzene‐bridged periodic mesoporous organosilicas (PMOs) that were functionalized with exceptionally high loadings of carboxylic acid groups (COOH), up to 80 mol % based on silica, have been synthesized and their use as adsorbents for the adsorption of methylene blue (MB), a basic dye pollutant, and for the loading and release of doxorubicin (DOX), an anticancer drug, is demonstrated. These COOH‐functionalized benzene? silicas were synthesized by the co‐condensation of 1,4‐bis(triethoxysilyl) benzene (BTEB) and carboxyethylsilanetriol sodium salt (CES), an organosilane that contained a carboxylic acid group, in the presence of non‐ionic oligomeric surfactant Brij 76 in acidic medium. The materials thus obtained were characterized by a variety of techniques, including powder X‐ray diffraction (XRD), nitrogen‐adsorption/desorption isotherms, TEM, and ¹³C and ²⁹Si solid‐state NMR spectroscopy. Owing to the exceptionally high loadings of COOH groups, their high surface areas, and possible π? π‐stacking interactions, these adsorbents have very high adsorption capacities and extremely rapid adsorption rates for MB removal and for the controlled loading/release of DOX, thus manifesting their great potential for environmental and biomedical applications.     

Aqueous mercury adsorption in a fixed bed column of thiol functionalized mesoporous silica

The aim of this work was to investigate the aqueous mercury adsorption in a fixed bed of mesostructured silica SBA-15 functionalized with propylthiol by co-condensation (SBA-15-SH). Powdered synthesized adsorbents were used to prepare pellets with sizes ranging from 0.5 to 1 mm. The physicochemical properties determined from N₂ adsorption and chemical analysis were compared for powder and pellets. Batch static experiments were carried out to obtain the equilibrium mercury adsorption isotherms, resulting that although the maximum adsorption capacity was reduced from powder to pellets, the materials maintained high efficiency for mercury removal even at very low aqueous metal concentration. Dynamic experiments were carried out in a fixed bed column by modifying the volumetric flow rate, bed length, inlet concentration, and amount of propylthiol groups incorporated to the adsorbent, and analyzing the temporal scale and the mercury adsorption capacities. The elution of the fixed bed was carried out chemically by circulating an aqueous 2 M hydrobromic acid stream for 2 h so achieving a complete recovery of the mercury previously adsorbed. Simplified dynamic equations of Bohart–Adams and Wolborska were used for modeling the breakthrough curves.     

Adsorption of ionic surfactants on polar surfaces with a low content of chemically adsorbed alkyl chains

Colloidal silica and titanium dioxide were surface-modified by chemisorption of octadecyl dimethylmethoxy silane. The surface density of these alkyl silane groups was adjusted to less than 7% of the available surface hydroxyls, leaving the adsorbents hydrophilic and electrically charged in aqueous solution.Ionic surfactants (tetradecylpyridinium chloride and sodium lauryl sulfate) are adsorbed onto the surface-modified silica and titanium dioxide from aqueous solution, even in the case where the surface of the adsorbents exhibits the same sign of electrical charge as the surfactant ionic head groups. According to the adsorption model of Gu the chemiadsorbed alkyl chains are supposed to serve as anchors for small surface aggregates of the ionic surfactants.     

Cyclodextrin/silica hybrid adsorbent for removal of methylene blue in aqueous media

Functionalization of a silica surface using cyclodextrin was performed using citric acid as a bonding agent. The material obtained was characterized using spectroscopic, X-ray, and thermogravimetric analyses. The effectiveness of the product for removal of dyes from aqueous media was evaluated using methylene blue as a model molecule, for which the best adsorption was achieved at pH values higher than 3.5. The correlation coefficients obtained using the Langmuir isotherm enabled elucidation of the adsorption mechanism. The maximum capacity of the nano-adsorbent for adsorption of the dye was 212 mg g^?1. Thermodynamic tests performed at 25, 35, and 45 °C showed that the mechanism was spontaneous and temperature-dependent, with adsorption following the pseudo-second order kinetic model and being fastest during the early stages, with equilibrium achieved after around 3 h. The results showed that hybrid materials based on cyclodextrin can be used for removal of dyes from aqueous media, and could therefore substitute other more expensive adsorbents. Advantages of these new materials include ease of preparation, relatively low cost, and good adsorption properties.     

Adsorption of Eu(III) ions on silicas with noncovalently immobilized thiacalix[4]arene derivatives

Using the noncovalent immobilization of some thiacalix[4]arene derivatives on the surface of silanized silica, we obtained efficient adsorption materials for the extraction of Eu(III) ions from aqueous solutions of medium mineralization. The specific surface area of the adsorbents is 200–370 m²/g. It is shown that adsorbents containing thiacalix[4]arenes with phosphoryl groups selectively extract up to 99% of europium ions from aqueous solutions at pH 5.5–6; they are characterized by adsorption capacity of 7.5–14.5 mg/g and high distribution coefficients. The studied adsorbents exhibit high selectivity with respect to Eu(III) ions, wherein the distribution coefficients for Cs, Sr, Tb(III), Sm(III), Gd(III), La(III), and UO₂²⁺ are five times or more smaller.     

Ionic silica based hybrid material containing the pyridinium group used as an adsorbent for textile dye

The present study reports the development of an ionic silica based hybrid material containing the cationic pyridinium group, which was employed for the removal of the Reactive Red 194 textile dye from aqueous solution. Three hybrid material samples were prepared with planned textural and chemical properties, varying the inorganic precursor molar percentage in the sol-gel synthesis. The obtained samples were defined as Py/Si-90, Py/Si-92 and Py/Si-94, where the number specifies the inorganic molar percentage. The hybrid samples were characterized by elemental, infrared, (13)C and (29)Si NMR, N(2) adsorption-desorption isotherms and thermogravimetric analyses. The dye-removing ability of these adsorbents was determined by the batch contact adsorption procedure. Effects such as pH value and adsorbent dosage on the adsorption capacities were studied. Four kinetic models were applied. The adsorption was best fitted to Avrami fractional-order kinetic model for the three hybrid material samples. The kinetic data were also adjusted to an intra-particle diffusion model resulting three linear regions, indicating that the adsorption kinetics follows multiple sorption rates. The equilibrium data were fitted to Langmuir, Freundlich and Liu isotherm models. The maximum adsorption capacities were 165.4, 190.3 and 195.9 mg g(-1) for Py/Si-90, Py/Si-92 and Py/Si-94, respectively. Simulated dye-house effluents were used to check the applicability of the proposed adsorbents for effluent treatment. Dye loaded adsorbents were regenerated (>98.2%) by using 0.4 mol L(-1) of NaOH solution as an eluent.     

表面氨基高密度化介孔氧化硅的合成及其高效去除酸性橙7

以月桂酸为阴离子表面活性剂,3-胺丙基三乙氧基硅烷(APTES)为共结构导向剂,合成了高含量氨基功能化介孔氧化硅材料(AFMS)。以AFMS为吸附剂对溶液中酸性橙7(AO7)进行吸附,对影响AO7吸附效率的相关因素进行了详细研究,结果表明,溶液pH值及温度影响较大。吸附动力学表明,本研究中合成的AFMS对AO7的吸附速率极快。Sips吸附模型对吸附等温线模拟效果最好,从中可知AO7在样品D(由3.0 mL正硅酸乙酯及1.4 mL APTES合成)上的最大吸附量为1.26 mmol·g^-1,远远高于相关文献报道的值。此外,通过吸-脱附循环实验证明,样品D具有良好的稳定性。     

A Novel Affinity Support Material for the Separation of Immunoglobulin G from Human Plasma

2‐Methacrylamidohistidine (MAH) as a pseudospecific ligand was synthesized from methacryl chloride and histidine. Spherical beads with an average size of 50–63 μm were obtained by the radical suspension polymerization of MAH and 2‐hydroxyethyl methacrylate (HEMA) conducted in an aqueous dispersion medium. Owing to the reasonably rough character of the bead surface, P(HEMA‐co‐MAH) beads had a specific surface area of 17.6 m²·g^–1. Synthesized MAH was characterized by NMR. P(HEMA‐co‐MAH) beads were characterized by swelling studies, FT‐IR spectroscopy, scanning electron microscopy (SEM) and elemental analysis. P(HEMA‐co‐MAH) affinity beads with a swelling ratio of 65% were used in the separation of human immunoglobulin G (HIgG) from aqueous solutions and human plasma. The maximum HIgG adsorption on the P(HEMA‐co‐MAH) adsorbents was observed at pH 7.4 for phosphate and at pH 6.0 for morpholinoethanesulfonic acid buffers. The HIgG adsorption onto the PHEMA adsorbents was negligible. Higher adsorption values (up to 46.5 mg·g^–1) were obtained when the P(HEMA‐co‐MAH) adsorbents were used in aqueous solutions. Much higher amounts of HIgG were adsorbed from human plasma (up to 73.8 mg·g^–1). Adsorption capacities of other blood proteins were obtained as 3.2 mg·g^–1 for fibrinogen and 4.6 mg·g^–1 for albumin. The total protein adsorption was determined to be 82.2 mg·g^–1. The pseudospecific affinity beads allowed one‐step separation of HIgG from human plasma. HIgG molecules could be repeatedly adsorbed and desorbed with these adsorbents without noticeable loss in their HIgG adsorption capacity.     

Effect of pore size on the performance of composite adsorbent

Three kinds of commercial silica gels with pore size of 2–3, 4–7 and 8–10 nm respectively are used for preparing composite adsorbents by soaking them into the aqueous solution of calcium chloride. The test result indicates that both the water uptake and adsorption rate of composite adsorbents prepared from 4–7 and 8–10 nm silica gels improve greatly compared to pure silica gels, but they do not for 2–3 nm silica gels. The silica gel with pore size of 2–3 nm is not suitable for preparing the composite adsorbent by impregnation method due to the pore blockage because of the small pore size. The SCP and COP of the adsorption chiller with sample SA50 are 128.3 Wkg^?1 and 0.27 respectively at the hot source temperature of 90 °C, which are largely superior to that of SA0. Hence using the composite adsorbent instead of the pure silica gel can reduce the size of the adsorption chiller.     

Study of adsorption and preconcentration by using a new silica organomodified with [3‐(2,2′‐dipyridylamine)propyl] groups

In this work, a silica surface chemically modified with [3‐(2,2′‐dipyridylamine)propyl] groups, named [3‐(2,2′‐dipyridylamine)propyl]silica (Si‐Pr‐DPA) was prepared, characterized, and evaluated for its heavy metal adsorption characteristics from aqueous solution. To our knowledge, we are the first authors who have reported the present modification. The material was characterized using infrared spectroscopy, SEM, and NMR ²⁹Si and ¹³C solid state. Batch and column experiments were conducted to investigate for heavy metal removal from dilute aqueous solution by sorption onto Si‐Pr‐DPA. From a number of studies the affinity of various metal ions for the Si‐Pr‐DPA sorbent was determined to follow the order Fe(III) > Cr(III) >> Cu(II) > Cd(II) > Pb(II) > Ni(II). Two standard reference materials were used for checking the accuracy and precision of the method. The proposed method was successfully applied to the analysis of environmental samples. This ligand material has great advantage for adsorption of transition‐metal ions from aqueous medium due to its high degree of organofunctionalization associated with the large adsorption capacity, reutilization possibility, and rapidity in reaching the equilibrium.     

Preparation and characterization of nanocomposite,silica aerogel,activated carbon and its adsorption properties for Cd (II) ions from aqueous solution

A novel composite adsorbent, silica aerogel activated carbon was synthesized by sol-gel process at ambient pressure drying method. The composite was characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and Nitrogen adsorption/desorption isotherms (BET).In the present study, the mentioned adsorbent was used moderately for the removal of cadmium ions from aqueous solutions and was compared with two other adsorbents of cadmium, activated carbon and silica aerogel. The experiments of Cd adsorption by adsorbents were performed at different initial ion concentrations, pH of the solution, adsorption temperature, adsorbent dosage and contact time. Moreover, the optimum pH for the adsorption was found to be 6.0 with the corresponding adsorbent dosage level of 0.1 g at 60 °C temperature. Subsequently, the equilibrium was achieved for Cd with 120 min of contact time.Consequently, the results show that using this composite adsorbent could remove more than 60% of Cd under optimum experimental conditions. Langmuir and Freundlich isotherm model was applied to analyze the data, in which the adsorption equilibrium data were correlated well with the Freundlich isotherm model and the equilibrium adsorption capacity (q_e) was found to be 0.384 mg/g in the 3 mg/L solution of cadmium.     

Selective Pre-concentration and Solid Phase Extraction of Mercury（Ⅱ） from Natural Water by Silica Gel-loaded （E）-N-（1-Thien-2＇-ylethylidene）-1,2-phenylenediamine Phase

Silica gel-loaded （E）-N-（1-thien-2＇-ylethylidene）-1,2-phenylenediamine （TEPDA） phase was synthesized based on physical adsorption approaches. The stability of a chemically modified TEPDA especially in concentrated hydrochloric acid that was then used as a recycling and preconcentration reagent allowed the further uses of silica gel-loaded immobilized TEPDA phase. The application of this silica gel-loaded phase to sorption of a series of metal ions was performed by using different controlling factors such as the pH of the metal ion solution and the equilibration shaking time by the static technique. This difference was interpreted on the basis of selectivity incorporated in these sulfur containing silica gel-loaded TEPDA phases. Hg（Ⅱ） was found to exhibit the highest affinity towards extraction by these silica gel-loaded TEPDA phases. The pronounced selectivity was also confirmed by the determined distribution coefficients （Kd） of all the metal ions, showing the highest value reported for mercury（Ⅱ） extraction by the silica gel immobilized TEPDA phase. The potential applications of the silica gel immobilized TEPDA phase to selective extraction of mercury（Ⅱ） from aqueous solution were successfully accomplished and preconcentration of low concentration of Hg（Ⅱ） （30 pg·mL^-1） from natural tap water with a preconcentration factor of 200 for Hg（Ⅱ） off-line analysis was conducted by cold vapor atomic absorption analysis.     

Adsorptive Behavior of Methylene Blue onto Sawdust of Sour Lemon,Date Palm,and Eucalyptus as Agricultural Wastes

In the present study, to remove methylene blue (MB) from aqueous solution, some agricultural residues and cheap bioadsorbents such as sawdust of palm trees, eucalyptus, and sour lemon were used. To do this, significant parameters like contact time, temperature, pH, initial concentration, and adsorbent dosage were checked. The results affirmed that the best conditions for MB adsorption from aqueous solution were obtained such as the temperature of 25?°C, pH of 8, adsorbent dosage of 2g/L, contact time of 120?minutes, and dye concentration of 5?mg/l which under these conditions the adsorption efficiencies determined were 95.8, 93.4, and 92.8% using sawdust of palm tree, eucalyptus, and sour lemon, respectively. Also, the equilibrium behavior of adsorbents showed that the Freundlich model could better predict the adsorption behavior of the process due to having a larger correlation coefficient (R²). The maximum biosorption capacities by Langmuir isotherm model were also obtained 54, 53.5, and 52.4?mg/g for sawdust of palm trees, eucalyptus, and lemon, respectively, which were significant amounts. In addition, kinetic behavior of adsorption showed that pseudo-second-order model can describe the kinetics of the adsorption process better than the pseudo-first-order model. Moreover, kinetic, equilibrium, and thermodynamic behaviors of adsorption affirmed that the biosorption process was desirable, physisorption, spontaneous, and exothermic.     

Adsorption of chromium from aqueous solution using chitosan beads

A basic investigation on the removal of Cr(III) and Cr(VI) ions from aqueous solution by chitosan beads was conducted in a batch adsorption system. The chitosan beads were prepared by casting an acidic chitosan solution into an alkaline solution. The influence of different experimental parameters; pH, agitation period and different concentration of Cr(III) and Cr(VI) ions was evaluated. A pH 5.0 was found to be an optimum pH for Cr(III) adsorption, and meanwhile pH 3.0 was the optimum pH for the adsorption of Cr(VI) onto chitosan beads. The Langmuir and Freundlich adsorption isotherm models were applied to describe the isotherms and isotherm constants for the adsorption of Cr(III) and Cr(VI) onto chitosan beads. Results indicated that Cr(III) and Cr(VI) uptake could be described by the Langmuir adsorption model. The maximum adsorption capacities of Cr(III) and Cr(VI) ions onto chitosan beads were 30.03 and 76.92 mg g⁻¹, respectively. Results showed that chitosan beads are favourable adsorbents. The Cr(III) and Cr(VI) ions can be removed from the chitosan beads by treatment with an aqueous EDTA solution.     

表面氨基高密度化介孔氧化硅的合成及其高效去除酸性橙7

以月桂酸为阴离子表面活性剂,3-胺丙基三乙氧基硅烷(APTES)为共结构导向剂,合成了高含量氨基功能化介孔氧化硅材料(AFMS)。以AFMS为吸附剂对溶液中酸性橙7(AO7)进行吸附,对影响AO7吸附效率的相关因素进行了详细研究,结果表明,溶液p H值及温度影响较大。吸附动力学表明,本研究中合成的AFMS对AO7的吸附速率极快。Sips吸附模型对吸附等温线模拟效果最好,从中可知AO7在样品D(由3.0 m L正硅酸乙酯及1.4 m L APTES合成)上的最大吸附量为1.26 mmol·g-1,远远高于相关文献报道的值。此外,通过吸-脱附循环实验证明,样品D具有良好的稳定性。     

Sol–gel derived ion imprinted thiocyanato-functionalized silica gel as selective adsorbent of cadmium(II)

A Cd(II)-imprinted thiocyanato-functionalized silica gel adsorbent with high adsorption capacity was prepared by surface imprinting technique combined with sol–gel process for the selective adsorption of Cd(II) ion in aqueous solution, and was characterized by Fourier-transform infrared spectroscopy, nitrogen gas sorption and thermogravimetric analysis. The influences of different conditions (such as the pH of solutions, the contact time and the initial concentrations of Cd(II) ions) on the adsorption capacity of Cd(II) were investigated. The optimum pH of adsorption was in the range of 4–8.5. The adsorption equilibrium could be reached in 20 min. The relatively selectivity coefficients of the imprinted silica were higher than those of the non-imprinted adsorbents. Ho’s pseudo-second-order model well described the kinetics of the adsorption reaction. The adsorption process of metals followed Redlich–Peterson isotherm model, and the experimental value of maximum adsorption capacity for Cd(II) was 72.8 mg·g^?1. The positive value of ΔH ^o suggested endothermic nature of Cd(II) adsorption on the imprinted silica adsorbent. Increase in entropy of adsorption reaction was shown by the positive value of ΔS ^o and the negative value of ΔG ^o indicating that the adsorption was spontaneous in nature.     

Revealing the Fine Details of Functionalized Silica Surfaces by Solid‐State NMR and Adsorption Isotherm Measurements: The Case of Fluorinated Stationary Phases for Liquid Chromatography

The structural and chromatographic characterization of two novel fluorinated mesoporous materials prepared by covalent reaction of 3‐(pentafluorophenyl)propyldimethylchlorosilane and perfluorohexylethyltrichlorosilane with 2.5 μm fully porous silica particles is reported. The adsorbents were characterized by solid state ²⁹Si, ¹³C, and ¹⁹F NMR spectroscopy, low‐temperature nitrogen adsorption, elemental analysis (C and F), and various chromatographic measurements, including the determination of adsorption isotherms. The structure and abundance of the different organic surface species, as well as the different silanol types, were determined. In particular, the degree of so‐called horizontal polymerization, that is, Si‐O‐Si bridging parallel to the silica surface due to the reaction, under “quasi‐dry” conditions, of trifunctional silanizing agents with the silica surface was quantified. Significant agreement was found between the information provided by solid‐state NMR, elemental analysis, and excess isotherms regarding the amount of surface residual silanol groups, on the one hand, and the degree of surface functionalization, on the other. Finally, the kinetic performance of the fluorinated materials as separation media for applications in near‐ultrahigh‐performance liquid chromatography was evaluated. At reduced velocities of about 5.5 (ca. 600 bar backpressure at room temperature) with 3 mm diameter columns and toluene as test compound, reduced plate heights on the order of 2 were obtained on columns of both adsorbents.     

Design and evaluation of functionalized multi-walled carbon nanotubes by 3-aminopyrazole for the removal of Hg(II) and As(III) ions from aqueous solution

Carboxylated multi-walled carbon nanotubes (MWCNTs-COOH) were chemically modified with 3-aminopyrazole (MWCNTs-f) and applied as an efficient adsorbent to mercury and arsenic adsorption from aqueous solutions. The adsorbents were characterized by FT-IR, EDX, FE-SEM, TGA, and BET. The effects of pH, adsorbent dose, and initial ions concentration on the adsorption efficiency and the optimum conditions were investigated by central composite design. The optimum conditions were obtained at pH 7.6–7.9, adsorbent dose 20 mg, and initial ions concentration 20 ppm. So the maximum adsorption efficiencies in these conditions were 80.5 and 72.4% for the removal of Hg(II) and As(III) by MWCNTs-f, respectively. The quadratic model was used for the analysis of variance and indicated that adsorption of metal ions strongly depends on pH. Also, the pseudo-second-order model has been achieved from the adsorption kinetic studies. Furthermore, the experimental data were well fitted to the Langmuir isotherm and the maximum adsorption capacities obtained were 112 and 133 mg g^?1 for the adsorption of Hg(II) and As(III) by MWCNTs-f, respectively. Moreover, a thermodynamic study revealed that the adsorption reactions were spontaneous and endothermic with the increase in randomness. In addition, a desorption study showed the favorable regeneration ability of MWCNTs-f even after three adsorption–desorption cycles. Therefore, the MWCNTs-f adsorbent has good potential for the removal of Hg(II) and As(III) pollutants from aqueous solutions.     

EFFECT OF pH ON THE ADSORPTION OF p-AMINOBENZOIC ACID ON POLYSTYRENE-BASED ADSORBENTS

In the present study the adsorptive properties of p-aminobenzoic acid with hypercrosslinked and multi-functional polymeric adsorbents at different solution pHs were systematically investigated in accordance with the particular physicochemical characteristics of the aromatic amphoteric compound involving both Lewis acid and Lewis base functional groups. It was found that the equilibrium adsorption data of the three polymeric adsorbents fitted well in the Langmuir and Freundlich isotherm equations. Studies at various pH levels indicate that the capacity of the adsorbents for adsorption of the ionic forms of adsorbate is less than that for the corresponding neutral species. At pH 3.78, the adsorption capacities of the three adsorbents are the highest. Whereas the adsorption property of multi-functional polymeric adsorbent NJ-99 is the largest, which may be attributed to the strong hydrogen-bonding interaction between the amino groups on the resin and the carboxyl group of p-aminobenzoic acid. The trend of the adsorption capacities of the three adsorbents towards p-aminobenzoic acid with the solution pH is in accord with the dissociation curve of the neutral molecular p-aminobenzoic acid. The adsorption forces include π-π interaction, hydrogen-bonding interaction and electrostatic attraction or repulsion when there exist the molecular and ionic adsorbing species at different pHs in aqueous solution.