Efficient Noble‐Metal‐Free γ‐Fe2O3@NiO Core–Shell Nanostructured Photocatalysts for Water Oxidation

Flowerlike noble‐metal‐free γ‐Fe₂O₃@NiO core–shell hierarchical nanostructures have been fabricated and examined as a catalyst in the photocatalytic oxidation of water with [Ru(bpy)₃](ClO₄)₂ as a photosensitizer and Na₂S₂O₈ as a sacrificial electron acceptor. An apparent TOF of 0.29 μmols^?1 m^?2 and oxygen yield of 51 % were obtained with γ‐Fe₂O₃@NiO. The γ‐Fe₂O₃@NiO core–shell hierarchical nanostructures could be easily separated from the reaction solution whilst maintaining excellent water‐oxidation activity in the fourth and fifth runs. The surface conditions of γ‐Fe₂O₃@NiO also remained unchanged after the photocatalytic reaction, as confirmed by X‐ray photoelectron spectroscopy (XPS).     

Efficient conversion of fructose to 5‐hydroxymethylfurfural by functionalized γ‐Al2O3 beads

Millimeter size γ‐Al₂O₃ beads were prepared by alginate assisted sol–gel method and grafting organic groups with propyl sulfonic acid and alkyl groups as functionalized γ‐Al₂O₃ bead catalysts for fructose dehydration to 5‐hydroxymethylfurfural (5‐HMF). Experiment results showed that the porous structure of γ‐Al₂O₃ beads was favorable to the loading and dispersion of active components, and had an obvious effect on the properties of the catalyst. The lower calcination temperature of γ‐Al₂O₃ beads increased the specific surface area, the hydrophobicity and the activity of catalysts. Competition between the reaction of alkyl groups and ‐SH groups with surface hydroxyl during the preparation process of the catalyst influenced greatly the acid site densities, hydrophobic properties and activity of the catalyst. With an increase in the alkyl group chain, the hydrophobicity of catalysts increased obviously and the activity of the catalyst was enhanced. The most hydrophobic catalyst C₁₆‐SO₃H‐γ‐Al₂O₃–650°C exhibited the highest yield of 5‐HMF (84%) under the following reaction conditions: reaction medium of dimethylsulfoxide/H₂O (V/V, 4:1), catalyst amount of 30 mg, temperature of 110°C and reaction time of 4 hr.     

Hierarchical Fe3O4@TiO2 Yolk–Shell Microspheres with Enhanced Microwave‐Absorption Properties

A facile and efficient strategy for the synthesis of hierarchical yolk–shell microspheres with magnetic Fe₃O₄ cores and dielectric TiO₂ shells has been developed. Various Fe₃O₄@TiO₂ yolk–shell microspheres with different core sizes, interstitial void volumes, and shell thicknesses have been successfully synthesized by controlling the synthetic parameters. Moreover, the microwave absorption properties of these yolk–shell microspheres, such as the complex permittivity and permeability, were investigated. The electromagnetic data demonstrate that the as‐synthesized Fe₃O₄@TiO₂ yolk–shell microspheres exhibit significantly enhanced microwave absorption properties compared with pure Fe₃O₄ and our previously reported Fe₃O₄@TiO₂ core–shell microspheres, which may result from the unique yolk–shell structure with a large surface area and high porosity, as well as synergistic effects between the functional Fe₃O₄ cores and TiO₂ shells.     

l‐Arginine‐Triggered Self‐Assembly of CeO2 Nanosheaths on Palladium Nanoparticles in Water

Pd@CeO₂ core–shell nanostructures with a tunable Pd core size, shape, and nanostructure as well as a tunable CeO₂ sheath thickness were obtained by a biomolecule‐assisted method. The synthetic process is simple and green, as it involves only the heating of a mixture of Ce(NO₃)₃, l ‐arginine, and preformed Pd seeds in water without additives. Importantly, the synthesis is free of thiol groups and halide ions, thus providing a possible solution to the problem of secondary pollution by Pd nanoparticles in the sheath‐coating process. The Pd/CeO₂ nanostructures can be composited well with γ‐Al₂O₃ to create a heterogeneous catalyst. In subsequent tests of catalytic NO reduction by CO, Pd@CeO₂/Al₂O₃ samples based on Pd cubes (6, 10, and 18 nm), Pd octahedra (6 nm), and Pd cuboctahedra (9 nm) as well as a simply loaded Pd cube (6 nm)–CeO₂/Al₂O₃ sample were used as catalysts to investigate the effects of the Pd core size and shape and the hybrid nanostructure on the catalytic performance.     

Biodegradable Gelatin as Template for the Preparation of Mesoporous Alumina

In this study, we propose a time‐ and energy‐saving method using biodegradable gelatin as a green template and a low‐toxicity inorganic aluminum salt (Al(NO₃)₃·9H₂O) as a low‐cost aluminum source for the preparation of mesoporous alumina (γ‐Al₂O₃). The effects of pH (pH 8.0–10.0), gelatin to aluminum source ratio (0–1.9), and the hydrothermal treatment time (0–72 h) are thoroughly explored. The gelatin can assemble with the aluminum species γ‐AlOOH via hydrogen bonding to prevent the self‐condensation of the γ‐AlOOH during the hydrothermal treatment. Distinctly, the mesoporous γ‐Al₂O₃ was obtained from the calcination of the resulting gelatin–γ‐AlOOH composites. Without gelatin, high‐crystallinity γ‐AlOOH formed after the hydrothermal treatment, which transformed into the nonporous γ‐Al₂O₃ with a small surface area (20 m²/g). Finally, it was found that with a gelatin/aluminum ratio of 0.81, reaction pH value of 8.0, and hydrothermal treatment time of 24 h, high‐surface‐area mesoporous γ‐Al₂O₃ (262 m²/g) with pore diameter of 6.3 nm could be synthesized.     

Nitrogen‐Enriched Fe3O4@Carbon Nanospheres Derived from Fe3O4@3‐Aminophenol/Formaldehyde Resin Nanospheres Based on a Facile Hydrothermal Strategy: Towards a Robust Catalyst Scaffold for Platinum Nanocrystals

Robust nitrogen‐enriched Fe₃O₄@carbon nanospheres have been fabricated as a catalyst scaffold for Pt nanoparticles. In this work, core–shell Fe₃O₄@3‐aminophenol/formaldehyde (APF) nanocomposites were first synthesized by a simple hydrothermal method, and subsequently carbonized to Fe₃O₄@N‐Carbon nanospheres for in situ growth of Pt nanocrystals. Abundant amine groups were distributed uniformly onto Fe₃O₄@N‐Carbon nanospheres, which not only improved the dispersity and stability of the Pt nanocrystals, but also endowed the Pt‐based catalysts with good compatibility in organic solvents. The dense three‐dimensional cross‐linked carbon shell protects the Fe₃O₄ cores against damage from harsh chemical environments, even in aqueous HCl (up to 1.0 m ) or NaOH (up to 1.0 m ) solutions under ultrasonication for 24 hours, which indicates that it can be used as a robust catalyst scaffold. In the reduction of nitrobenzene compounds, the Fe₃O₄@N‐Carbon@Pt nanocatalysts show outstanding catalytic activity, stability, and recoverability.     

Highly selective aerobic oxidation of alkylarenes catalyzed by cobalt‐based nanocatalyst in aqueous solution

The catalytic aerobic oxidation of alkylarenes catalyzed by cobalt supported on a highly crystalline γ‐Al₂O₃ support (Co/Al₂O₃ nanocatalyst) is reported. The catalyst was prepared by a co‐precipitation method and characterized using scanning and high‐resolution transmission electron microscopies, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction and surface area measurements. A wide range of alkylarenes were converted to corresponding ketones. The catalyst can be recovered by simple filtration is recyclable for up to six consecutive runs.     

Confined Ultrathin Pd‐Ce Nanowires with Outstanding Moisture and SO2 Tolerance in Methane Combustion

An efficient strategy (enhanced metal oxide interaction and core–shell confinement to inhibit the sintering of noble metal) is presented confined ultrathin Pd‐CeO_x nanowire (2.4 nm) catalysts for methane combustion, which enable CH₄ total oxidation at a low temperature of 350 °C, much lower than that of a commercial Pd/Al₂O₃ catalyst (425 °C). Importantly, unexpected stability was observed even under harsh conditions (800 °C, water vapor, and SO₂), owing to the confinement and shielding effect of the porous silica shell together with the promotion of CeO₂. Pd‐CeO_x solid solution nanowires (Pd‐Ce NW) as cores and porous silica as shells (Pd‐CeNW@SiO₂) were rationally prepared by a facile and direct self‐assembly strategy for the first time. This strategy is expected to inspire more active and stable catalysts for use under severe conditions (vehicle emissions control, reforming, and water–gas shift reaction).     

Hydrophobic Modification of Pd/SiO2@Single‐Site Mesoporous Silicas by Triethoxyfluorosilane: Enhanced Catalytic Activity and Selectivity for One‐Pot Oxidation

To enhance the catalytic activity in a selective one‐pot oxidation using in‐situ generated H₂O₂, a hydrophobically modified core–shell catalyst was synthesized by means of a simple silylation reaction using the fluorine‐containing silylation agent triethoxyfluorosilane (TEFS, SiF(OEt)₃). The catalyst consisted of a Pd‐supported silica nanosphere and a mesoporous silica shell containing isolated Ti^IV and F ions bonded with silicon (Si?F bond). Structural analyses using XRD and N₂ adsorption–desorption suggested that the mesoporous structure and large surface area of the mesoporous shells were retained even after the modification. During the one‐pot oxidation of sulfide, catalytic activity was enhanced significantly by increasing the amount of fluorine in the shell. A hydrophobic surface enhanced adsorption of the hydrophobic reactant into the mesopore, while the less hydrophobic oxygenated products efficiently diffused into the outside of the shell, which improved the catalytic activity and selectivity. In addition, the present methodology can be used to enhance the catalytic activity and selectivity in the one‐pot oxidation of cyclohexane by using an Fe‐based core–shell catalytic system.     

Structural Characterization of Alumina‐Supported Rh Catalysts: Effects of Ceriation and Zirconiation by using Metal–Organic Precursors

The effects of the addition of ceria and zirconia on the structural properties of supported rhodium catalysts (1.6 and 4 wt % Rh/γ‐Al₂O₃) are studied. Ceria and zirconia are deposited by using two preparation methods. Method I involves the deposition of ceria on γ‐Al₂O₃ from Ce(acac)₃, and the rhodium metal is subsequently added, whereas method II is based on a controlled surface reaction technique, that is, the decomposition of metal–organic M(acac)_x (in which M=Ce, x=3 and M=Zr, x=4) on Rh/γ‐Al₂O₃. The structures of the prepared catalyst materials are characterized ex situ by using N₂ physisorption, transmission electron microscopy, high‐angle annular dark‐field scanning transmission election microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray photoelectron spectroscopy (XPS), and X‐ray absorption fine structure spectroscopy (XAFS). All supported rhodium systems readily oxidize in air at room temperature. By using ceriated and zirconiated precursors, a larger rhodium‐based metallic core fraction is obtained in comparison to the undoped rhodium catalysts, suggesting that ceria and zirconia protect the rhodium particles against extensive oxidation. XPS results indicate that after the calcination and reduction treatments, a small amount of chlorine is retained on the support of all rhodium catalysts. EXAFS analysis shows significant Rh? Cl interactions for Rh/Al₂O₃ and Rh/CeO_x/Al₂O₃ (method I) catalysts. After reaction with H₂/He in situ, for series of samples with 1.6 wt % Rh, the EXAFS first shell analysis affords a mean size of approximately 30 atoms. A broader spread is evident with a 4 wt % rhodium loading (ca. 30–110 atoms), with the incorporation of zirconium providing the largest particle sizes.     

Applications of iron and nickel immobilized on hydroxyapatite‐core‐shell γ‐Fe2O3 as a nanomagnetic catalyst for the chemoselective oxidation of sulfides to sulfoxides under solvent‐free conditions

In the present study, Fe²⁺ and Ni²⁺ immobilized on hydroxyapatite‐core‐shell γ‐Fe₂O₃ (γ‐Fe₂O₃@HAp‐Fe²⁺ and γ‐Fe₂O₃@HAp‐Ni²⁺) with a high surface area has been synthesized and characterized by Fourier transform infrared (FTIR), X‐ray diffraction (XRD), vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), and scanning electron microscope (SEM) techniques. Then, γ‐Fe₂O₃@HAp‐Fe²⁺ and γ‐Fe₂O₃@HAp‐Ni²⁺ were used as a new and magnetically recoverable nano catalyst for the selective oxidation of sulfides to sulfoxides with 33% aqueous H₂O₂ (0.5 mL) as an oxidant at room temperature in good to excellent yields and short reaction time. Nontoxicity of reagent, mild reaction condition, inexpensive and high catalytic activity, simple experimental procedure, short period of conversion and excellent yields, and ease of recovery from the reaction mixture using an external magnet are the advantages of the present method.     

Controllable growth of conical and cylindrical TiO2-carbon core-shell nanofiber arrays and morphologically dependent electrochemical properties

Quasi‐aligned cylindrical and conical core–shell nanofibers consisting of carbon shells and TiO₂ nanowire cores are produced in situ on Ti foils without using a foreign metallic catalyst and template. A cylindrical nanofiber has a TiO₂ nanowire core 30–50 nm in diameter and a 5–10 nm‐thick cylindrical carbon shell, while in the conical nanostructure the TiO₂ nanowire core has a diameter of 20–40 nm and the thickness of the carbon shell varies from about 200 nm at the bottom to about 5 nm at the tip. Electrochemical analysis reveals well‐defined redox peaks of the [Fe(CN)₆]^3?/4? redox couple and heterogeneous charge‐transfer rate constants of 0.010 and 0.062 cm s^?1 for the cylindrical and conical nanofibers, respectively. The coverage of exposed edge planes on the cylindrical and conical carbon shells is estimated to be 2.5 and 15.5 % respectively. The more abundant exposed edge planes on the conical nanofiber decrease the overpotential and increase the voltammetric resolution during electrochemical detection of uric acid and ascorbic acid. Our results suggest that the density of edge‐plane sites estimated from Raman scattering is not necessarily equal to the density of exposed edge‐plane sites, and only carbon electrodes with a large density of exposed edge planes or free graphene sheet ends exhibit better electrochemical performance.     

Synthesis of highly fluorescent LaF3:Ln/LaF3 core/shell nanocrystals by a surfactant-free aqueous solution route

A surfactant-free aqueous solution route has been established for the synthesis of LaF₃:Ln³⁺/LaF₃ core/shell nanocrystals (Ln=Ce, Tb, Nd) heated at 75 °C at ambient pressure. All the as-prepared nanocrystals with spherical shape have an average size around 20 nm, and consist of well crystallized hexagonal phases. The X-ray photoelectron spectra was used to confirm that the LaF₃ shells have coated the LaF₃:Ce³⁺, Tb³⁺ cores. Compared with that of the original cores under the same conditions, the emission intensity of the LaF₃:Ce³⁺, Tb³⁺/LaF₃ and LaF₃:Nd³⁺/LaF₃ core/shell nanocrystals increased significantly of 120% and 60%, respectively. The quantum yield of the LaF₃:Ce³⁺, Tb³⁺/LaF₃ core/shell nanocrystals reached about 27% in aqueous solution. These results indicate that a significant reduction of the quenching from the surface of the core nanocrystals can be obtained by the synthesis of the core/shell structures, and this method can provide more desirable lanthanide-doped nanocrystals for potential biological applications.     

The effect of iron phosphate,alumina and silica coatings on the morphology of carbonyl iron particles

Carbonyl iron powders were coated with iron phosphate using phosphating method and boehmite (γ‐AlOOH) or silicon hydroxide (Si(OH)₄) nanoparticles derived from the hydrolysis of tri‐sec‐butoxide (Al(OC₄H₉)₃) or tetramethylsilane (Si(OCH₃)₄) using sol–gel method. The coated powders were dried and calcined at 400 °C for 3 h in air. Cross‐section morphology of coated carbonyl iron powders were investigated by scanning electron microscopy energy dispersive X‐ray analysis. Coated Fe micro‐particles were spherical in shape with ‘shell/core’ structures. The shells consisted of an amorphous layer with varying thickness (100–800 nm) and the core represented a carbonyl iron. Gelatinous morphology of dried FePO₄ coating composed from nanoparticles of iron oxyhydroxides and hydrated iron phosphate with a shell thickness of ～100 nm around iron particles was observed. In coatings based on alumina or silica xerogels with a thickness of ～100–150 nm or ～200–500 nm, the coatings were composed of iron oxyhydroxides and γ‐AlOOH or Si(OH)₄. The resulting XRD diffractograms revealed the hematite (α‐Fe₂O₃) and magnetite (Fe₃O₄) that were formed in phosphated and sol–gel coated iron powders. The X‐ray diffraction patterns did not verify the presence of phosphates, alumina or silica and indicate the amorphous or nanocrystalline structure of FePO₄, γ‐Al₂O₃ and SiO₂. Copyright © 2009 John Wiley & Sons, Ltd.     

Novel synthesis of Fe2O3–Pt ellipsoids coated by double‐shelled La2O3 as a catalyst for the reduction of 4‐nitrophenol

A facile strategy is reported for the fabrication of Pt‐loaded core–shell nanocomposite ellipsoids (Fe₂O₃‐Pt@DSL) consisting of ellipsoidal Fe₂O₃ cores, double‐layered La₂O₃ shells and deposited Pt nanoparticles (NPs). The formation of the doubled‐shelled structure uses Fe₂O₃‐Pt@mSiO₂ as template sacrificial agent and it involves the re‐deposition of silica and self‐assembly of metal oxide units. The preparation methods of double‐shelled metal oxides avoid repeated coating and etching and could be utilized to fabricate other shaped double‐shelled composites. Characterization results indicated that the Fe₂O₃‐Pt@DSL nanocomposites possessed mesoporous structure and tunable shell thickness. Moreover, due to the formation of Fe₂O₃ and La₂O₃ composites, Pt NPs can also be stabilized via deposition on chemically active oxides with a synergistic effect. Therefore, as a catalyst for the reduction of 4‐nitrophenol, Fe₂O₃‐Pt@DSL showed superior catalytic activity and reusability due to structural superiority and enhanced composite synergy. Finally, well‐dispersed Pt NPs were encapsulated into the void between the shell layers to construct the Fe₂O₃‐Pt@DSL‐Pt catalyst.     

A New Iron‐Based Carbon Monoxide Oxidation Catalyst: Structure–Activity Correlation

A new iron‐based catalyst for carbon monoxide oxidation, as a potential substitute for precious‐metal systems, has been prepared by using a facile impregnation method with iron tris‐acetylacetonate as a precursor on γ‐Al₂O₃. Light‐off and full conversion temperatures as low as 235 and 278 °C can be reached. However, the catalytic activity strongly depends on the loading; lower loadings perform better than higher ones. The different activities can be explained by variations of the structures formed. The structures are thoroughly characterized by a multimethodic approach by using X‐ray diffraction, Brunauer–Emmett–Teller surface areas, and Mössbauer spectroscopy combined with diffuse reflectance UV/Vis and X‐ray absorption spectroscopy. Consequently, isolated tetrahedrally coordinated Fe³⁺ centers and phases of AlFeO₃ are identified as structural requirements for high activity in the oxidation of carbon monoxide.     

Study on the mechanism of catalytic synthesis of dimethyldichlorosilane by AlCl3/MIL‐53(Al)@γ‐Al2O3

Dimethyldichlorosilane, one of the most consumed organosilicon monomers in the industry, can be prepared in a highly efficient and environmentally friendly synthesis method of disproportionating methylchlorosilanes. However, the internal mechanism of the reaction remains unclear. In this paper, the mechanism catalyzed by AlCl₃/MIL‐53(Al) and AlCl₃/MIL‐53(Al)@γ‐Al₂O₃ catalysts was calculated at B3LYP/6‐311++G(3df, 2pd) level by using the density functional theory (DFT). The results showed that although the two catalysts had similar active structures, the catalytic effects were significantly different. The Lewis acid center on the surface of γ‐Al₂O₃ in the core‐shell catalyst is complementary to the classic Lewis acid AlCl₃ through the spatial superposition effect, which greatly improves the Lewis acid catalytic activity of AlCl₃/MIL‐53(Al)@γ‐Al₂O₃.     

Core-Shell-Type All-Inorganic Heterometallic Nanoclusters: Record High-Nuclearity Cobalt Polyoxoniobates for Visible-Light-Driven Photocatalytic CO2 Reduction

Only rarely have polyoxometalates been found to form core–shell nanoclusters. Here, we succeeded in isolating a series of rare giant and all-inorganic core–shell cobalt polyoxoniobates (Co−PONbs) with diverse shapes, nuclearities and original topologies, including 50-nuclearity {Co₁₂Nb₃₈O₁₃₂}, 54-nuclearity {Co₂₀Nb₃₄O₁₂₈}, 62-nuclearity {Co₂₆Nb₃₆O₁₄₀} and 87-nuclearity {Co₃₃Nb₅₄O₁₈₈}. They are the largest Co−PONbs and also the polyoxometalates containing the greatest number of Co ions and the largest cobalt clusters known thus far. These molecular Co−PONbs have intriguing and atomically precise core–shell architectures comprising unique cobalt oxide cores and niobate oxide shells. In particular, the encapsulated cobalt oxide cores with different nuclearities have identical compositions, structures and mixed-valence Co³⁺/Co²⁺ states as the different sized Co−O moieties of the bulk cubic-spinel Co₃O₄, suggesting that they can serve as various molecular models of the cubic-spinel Co₃O₄. The successful construction of the series of the Co−PONbs reveals a feasible and versatile synthetic method for making rare core–shell heterometallic PONbs. Further, these new-type core–shell bimetal species are promising cluster molecular catalysts for visible-light-driven CO₂ reduction.     

Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe2O3@TiO2 (γ‐Fe2O3@TiO2‐EG‐Cu(II)): A highly efficient magnetically separable heterogeneous nanocatalyst for one‐pot synthesis of highly substituted imidazoles

A simple, efficient and eco‐friendly procedure has been developed using Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe₂O₃@TiO₂ (γ‐Fe₂O₃@TiO₂‐EG‐Cu(II)) for the synthesis of 2,4,5‐trisubstituted and 1,2,4,5‐tetrasubstituted imidazoles, via the condensation reactions of various aldehydes with benzil and ammonium acetate or ammonium acetate and amines, under solvent‐free conditions. High‐resolution transmission electron microscopy analysis of this catalyst clearly affirmed the formation of a γ‐Fe₂O₃ core and a TiO₂ shell, with mean sizes of about 10–20 and 5–10 nm, respectively. These data were in very good agreement with X‐ray crystallographic measurements (13 and 7 nm). Moreover, magnetization measurements revealed that both γ‐Fe₂O₃@TiO₂ and γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) had superparamagnetic behaviour with saturation magnetization of 23.79 and 22.12 emu g^?1, respectively. γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) was found to be a green and highly efficient nanocatalyst, which could be easily handled, recovered and reused several times without significant loss of its activity. The scope of the presented methodology is quite broad; a variety of aldehydes as well as amines have been shown to be viable substrates. A mechanism for the cyclocondensation reaction has also been proposed.     

Nano n‐propylsulfonated γ‐Al2O3: a new,efficient and reusable catalyst for synthesis of spiro[indoline‐3,4‐pyrazolo[3,4‐e][1,4]thiazepine]diones in aqueous media

Nano n‐propylsulfonated γ‐Al₂O₃ is easily prepared by the reaction of nano γ‐Al₂O₃ with 1,3‐propanesultone. This reagent can be used as an efficient catalyst for the synthesis of spiro [indoline‐3,4‐pyrazolo[3,4‐e][1,4]thiazepine]diones in aqueous media. This new method consistently has the advantages of excellent yields and short reaction times. Further, the catalyst can be reused and recovered several times. Copyright © 2013 John Wiley & Sons, Ltd.