Tuning the Chirality of Block Copolymers: From Twisted Morphologies to Nanospheres by Self‐Assembly

New advances into the chirality effect in the self‐assembly of block copolymers (BCPs) have been achieved by tuning the helicity of the chiral‐core‐forming blocks. The chiral BCPs {[N?P(R)‐O₂C₂₀H₁₂]_200?x[N?P(OC₅H₄N)₂]_x}‐b‐ [N?PMePh]₅₀ ((R)‐O₂C₂₀H₁₂=(R)‐1,1′‐binaphthyl‐2,2′‐dioxy, OC₅H₄N=4‐pyridinoxy (OPy); x=10, 30, 60, 100 for 3 a – d , respectively), in which the [N?P(OPy)₂] units are randomly distributed within the chiral block, have been synthesised. The chiroptical properties of the BCPs ([α]_D vs. T and CD) demonstrated that the helicity of the BCP chains may be simply controlled by the relative proportion of the chiral and achiral (i.e., [N?P(R)‐O₂C₂₀H₁₂] and [N?P(OPy)₂], respectively) units. Thus, although 3 a only contained only 5 % [N?P(OPy)₂] units and exhibited a preferential helical sense, 3 d with 50 % of this unit adopted non‐preferred helical conformations. This gradual variation of the helicity allowed us to examine the chirality effect on the self‐assembly of chiral and helical BCPs (i.e., 3 a – c ) and chiral but non‐helical BCPs (i.e., 3 d ). The very significant influence of the helicity on the self‐assembly of these materials resulted in a variety of morphologies that extend from helical nanostructures to pearl‐necklace aggregates and nanospheres (i.e., 3 b and 3 d , respectively). We also demonstrate that the presence of pyridine moieties in BCPs 3 a – d allows specific decoration with gold nanoparticles.     

Gold‐Decorated Chiral Macroporous Films by the Self‐Assembly of Functionalised Block Copolymers

We describe a new and very versatile method to place chosen chemical functionalities at the edge of the pores of macroporous materials. The method is based on the synthesis and self‐assembly of inorganic block copolymers (BCPs) having chiral rigid segments bearing controllable quantities of randomly distributed functional groups. The synthesis of a series of optically active block copolyphosphazenes (PP) with the general formula [N?P(R‐O₂C₂₀H₁₂)_0.9(FG)_0.2]_n‐b‐[N?PMePh]_m (FG=‐OC₅H₄N ( 6 ), ‐NC₄H₈S ( 7 ), and ‐NC₄H₈O ( 8 )), was accomplished by the sequential living cationic polycondensation of N‐silylphosphoranimines, using the mono‐end‐capped initiator [Ph₃P?N?PCl₃][Cl] ( 3 ). The self‐assembly of the phosphazene BCPs 6 – 8 led to chiral porous films. The functionality present on those polymers affected their self‐assembly behaviour resulting in the formation of pores of different diameters (D_n=111 ( 6 ), 53 ( 7 ) and 77 nm ( 8 )). The specific functionalisation of the pores was proven by decorating the films with gold nanoparticles (AuNPs). Thus, the BCPs 6 and 7 , having pyridine and thiomorpholine groups, respectively, were treated with HAuCl₄, followed by reduction with NaBH₄, yielding a new type of block copolyphosphazenes, which self‐assembled into chiral porous films specifically decorated with AuNPs at the edge of the pores.     

New Types of Planar Chiral [2.2]Paracyclophanes and Construction of One‐Handed Double Helices

New types of planar chiral (R_p)‐ and (S_p)‐4,7,12,15‐tetrasubstituted [2.2]paracyclophanes were synthesized from racemic 4,12‐dihydroxy[2.2]paracyclophane as the starting compound. Regioselective dibromination and transformation afforded a series of planar chiral (R_p)‐ and (S_p)‐4,7,12,15‐tetrasubstituted [2.2]paracyclophanes, which can be used as chiral building blocks. In this study, left‐ and right‐handed double helical structures were constructed via chemoselective Sonogashira–Hagihara coupling. The double helical compounds were excellent circularly polarized luminescence (CPL) emitters with large molar extinction coefficients, good photoluminescence quantum efficiencies, and large CPL dissymmetry factors.     

Disila‐Galaxolide and Derivatives: Synthesis and Olfactory Characterization of Silicon‐Containing Derivatives of the Musk Odorant Galaxolide

A series of silicon‐containing derivatives of the polycyclic musk odorant galaxolide ( 4 a ) was synthesized, that is, disila‐galaxolide ((4RS,7SR)‐ 4 b /(4RS,7RS)‐ 4 b ), its methylene derivative rac‐ 9 , and its nor analogue rac‐ 10 . The tricyclic title compounds with their 7,8‐dihydro‐6,8‐disila‐6 H‐cyclopenta[g]isochromane skeleton were prepared in multistep syntheses by using a cobalt‐catalyzed [2+2+2] cycloaddition of the mono‐ yne H₂C?CHCH₂OCH₂C?CB(pin) (B(pin)=4,4,5,5‐tetramethyl‐1,3,2‐di‐ oxaborolan‐2‐yl) with the diynes H₂C?C[Si(CH₃)₂C?CH]₂ or H₂C‐ [Si(CH₃)₂C?CH]₂ as the key step. Employing [Cr(CO)₃(MeCN)₃] as an auxiliary, the disila‐galaxolide diastereomers (4RS,7SR)‐ 4 b and (4RS,7RS)‐ 4 b could be chromatographically separated through their tricarbonylchromium(0) complexes, followed by oxidative decomplexation. The identity of the title compounds and their precursors was established by elemental analyses and multinuclear NMR spectroscopic studies and in some cases additionally by crystal structure analyses. Compounds (4RS,7SR)‐ 4 b , (4RS,7RS)‐ 4 b , rac‐ 9 , and rac‐ 10 were characterized for their olfactory properties, including GC‐olfactory studies of the racemic compounds on a chiral stationary phase. As for the parent galaxolide stereoisomers 4 a , only one enantiomer of the silicon compounds (4RS,7SR)‐ 4 b , (4RS,7RS)‐ 4 b , rac‐ 9 , and rac‐ 10 , smelt upon enantioselective GC‐olfactometry, which according to the elution sequence is assumed to be also (4S)‐configured as in the case of the galaxolide stereoisomers. The disila‐analogues (4S,7R)‐ 4 b and (4S,7S)‐ 4 b were, however, about one order of magnitude less intense in terms of their odor threshold than their parent carbon compounds (4S,7R)‐ 4 a and (4S,7S)‐ 4 a . The introduction of a 7‐methylene group in disila‐galaxolide ( 4 b →rac‐ 9 ) improved the odor threshold by a factor of two. With the novel silicon‐containing galaxolide derivatives, the presumed hydrophobic bulk binding pocket of the corresponding musk receptor(s) could be characterized in more detail, which could be useful for the design of novel musk odorants with an improved environmental profile.     

Mirror helices and helicity switch at surfaces based on chiral triangular-shape oligo(phenylene ethynylenes)

The self‐assembly of triangular‐shaped oligo(phenylene ethynylenes) (OPEs), peripherally decorated with chiral and linear paraffinic chains, is investigated in bulk, onto surfaces and in solution. Whilst the X‐ray diffraction data for the chiral studied systems display a broad reflection centered at 2θ ～20° (λ=Cu_Kα), the higher crystallinity of OPE 3 , endowed with three linear decyl chains, results in a diffractrogram with a number of well‐resolved reflections that can be accurately indexed as a columnar packing arranged in 2D oblique cells. Compounds (S)‐ 1 a and (R)‐ 1 b —endowed with (S)‐ and (R)‐3,7‐dimethyloctyloxy chains—transfer their chirality to the supramolecular structures formed upon their self‐assembly, and give rise to helical nanostructures of opposite handedness. A helicity switch is noticeable for the case of chiral (S)‐ 2 decorated with (S)‐2‐methylnonyloxy chains which forms right‐handed helices despite it possesses the same stereoconfiguration for their stereogenic carbons as (S)‐ 1 a that self‐assembles into left‐handed helices. The stability and the mechanism of the supramolecular polymerization in solution have been investigated by UV/Vis experiments in methylcyclohexane. These studies demonstrate that the larger the distance between the stereogenic carbon and the aromatic framework is, the more stable the aggregate is. Additionally, the self‐assembly mechanism is conditioned by the peripheral substituents: whereas compounds (S)‐ 1 a and (R)‐ 1 b self‐assemble in a cooperative manner with a low degree of cooperativity, the aggregation of (S)‐ 2 and 3 is well described by an isodesmic model. Therefore, the interaction between the chiral coil chains conditions the handedness of the helical pitch, the stability of the supramolecular structure and the supramolecular polymerization mechanism of the studied OPEs.     

Distinct chiral units from an axially prochiral ligand in a photoluminescent zinc(II)–organic complex

The asymmetric unit of the title compound, poly[(dimethylamine‐κN)[μ₃‐(E)‐2,6‐dimethyl‐4‐styrylpyridine‐3,5‐dicarboxylato‐κ³O³:O^3′:O⁵]zinc(II)], [Zn(C₁₇H₁₃NO₄)(C₂H₇N)]_n, consists of one crystallographically independent distorted tetrahedral Zn^II cation, one (E)‐2,6‐dimethyl‐4‐styrylpyridine‐3,5‐dicarboxylate (mspda²⁻) ligand and one coordinated dimethylamine molecule. Two S‐ and R‐type chiral units are generated from the axially prochiral mspda²⁻ ligand through C—H...O hydrogen bonds. The R‐type chiral units assemble a left‐handed (M) Zn–mspda helical chain, while the right‐handed (P) Zn–mspda helical chain is constructed from neighbouring S‐type chiral units. The P‐ and M‐type helical chains are interlinked by carboxylate O atoms to form a one‐dimensional ladder. Interchain N—H...O hydrogen bonds extend these one‐dimensional ladders into a two‐dimensional supramolecular architecture. The title compound exhibits luminescence at λ_max = 432 nm upon excitation at 365 nm.     

One‐Handed Helical Screw Direction of Homopeptide Foldamer Exclusively Induced by Cyclic α‐Amino Acid Side‐Chain Chiral Centers

Chiral cyclic α,α‐disubstituted amino acids, (3S,4S)‐ and (3R,4R)‐1‐amino‐3,4‐(dialkoxy)cyclopentanecarboxylic acids ((S,S)‐ and (R,R)‐Ac₅c^dOR; R: methyl, methoxymethyl), were synthesized from dimethyl L ‐(+)‐ or D ‐(?)‐tartrate, and their homochiral homoligomers were prepared by solution‐phase methods. The preferred secondary structure of the (S,S)‐Ac₅c^dOMe hexapeptide was a left‐handed (M) 3₁₀ helix, whereas those of the (S,S)‐Ac₅c^dOMe octa‐ and decapeptides were left‐handed (M) α helices, both in solution and in the crystal state. The octa‐ and decapeptides can be well dissolved in pure water and are more α helical in water than in 2,2,2‐trifluoroethanol solution. The left‐handed (M) helices of the (S,S)‐Ac₅c^dOMe homochiral homopeptides were exclusively controlled by the side‐chain chiral centers, because the cyclic amino acid (S,S)‐Ac₅c^dOMe does not have an α‐carbon chiral center but has side‐chain γ‐carbon chiral centers.     

Enantioselective Synthesis of β‐Amino Acids,Part 13

Inexpensive acryloyl chloride was converted in 91% overall yield to two derivatives of β‐alanine, (R,R,R)‐ 6 and (R,R,S)‐ 6 , containing two chiral auxiliaries. C‐Alkylation of (R,R,R)‐ and (R,R,S)‐ 6 via a dianion derivative, was performed by direct metallation with 2.2 equiv. of lithium hexamethyldisilazane (LHMDS) in THF at ?78°. C‐Alkylation of (R,R,S)‐ 6 ‐Li₂ (‘matched' pair of chiral auxiliaries) afforded the mono‐alkylated products 8 – 11 in 29–96% yield and 54–95% stereoselectivity. Employment of LiCl as an additive generally increased stereoselectivities, whereas the effect of HMPA as a cosolvent was erratic. Chemical correlation of the major diastereoisomer from the alkylation reactions with (S)‐α‐alkyl‐β‐alanine ( 12 – 15 ) showed that addition of the electrophile preferentially takes place on the enolate's Si‐face. This conclusion is also supported by molecular‐modeling studies (ab initio HF/3‐21G), which indicate that the lowest‐energy conformation for (R,R,S)‐ 6 ‐Li₂ presents the more sterically hindered Re‐face of the enolate. The theoretical studies also predict a determining role for N? Li? O chelation in (R,R,S)‐ 6 ‐Li₂, giving rise to an interesting ‘ion‐triplet' configuration for the dilithium dianion.     

Stereoselectivity in the Cycloaddition of Cyclopentadiene to N‐Fumaroyl‐[2R,S(R)]‐Bornane‐10,2‐sulfinamide Monomethyl Ester

The cyclic [2R,S(R)]‐bornane‐10,2‐sulfinamide (−)‐ 2b , an analogue of Oppolzer`s camphor‐derived sultam (−)‐ 2a , was synthesized by reduction of the known N‐alkylidenesulfinamide (+)‐ 1b with NaBH₄. The uncatalyzed [4+2] cycloaddition of cyclopentadiene to the methyl ester (−)‐ 3b of the N‐fumaroylsulfinamide, obtained from (−)‐ 2b , proceeds with lower endo and π‐facial selectivity as compared to dienophiles (−)‐ 3a , c . In contrast to these latter, the diastereoselectivity is reversed either in apolar CCl₄ or in the presence of TiCl₄. This inversion is explained by a competitive C(α)‐si addition on the reactive anti‐s‐trans conformer.     

Synthesis of dendronized,chiral conjugated polymers with appendant Fréchet‐type dendrons

New chiral binaphthyl‐based polyarylenes [(S)‐ 3a and (S)‐ 3b ] with appendant Fréchet‐type poly(aryl ether) dendrons (first generation and second generation) were synthesized with Suzuki polycondensation from chiral (S)‐6,6′‐dibromo‐2,2′‐didendron‐substituted 1,1′‐binaphthyl derivatives and p‐phenylene diboronic acid. The polymers were studied with circular dichroism, fluorescence, and ultraviolet–visible spectra. Laser light scattering measurements of (S)‐ 3a and (S)‐ 3b showed that their weight‐average molecular weights were 2.39 × 10⁵ and 1.09 × 10⁴, respectively. The specific optical rotation [α]_D was ?59.6 for (S)‐ 3a and ?62.7 for (S)‐ 3b . These dendronized conjugated polymers exhibited good thermal stability. The glass‐transition temperatures and the initial decomposition temperatures were 187.5 and 265.3 °C for (S)‐ 3a and 173.8 and 308.9 °C for (S)‐ 3b , respectively. (S)‐ 3a and (S)‐ 3b had high fluorescence quantum efficiencies, 87 and 91%, respectively, in tetrahydrofuran. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1167–1172, 2002     

Synthesis of the Spermidine Alkaloids (−)‐(2R,3R)‐ and (−)‐(2R,3S)‐3‐Hydroxycelacinnine: Macrocyclization with Oxirane‐Ring Opening and Inversion via Cyclic Sulfamidates

The two epimers (?)‐ 1a and (?)‐ 1b of the macrocyclic lactam alkaloid 3‐hydroxycelacinnine with the (2R,3R) and (2R,3S) absolute configurations, respectively, were synthesized by an alternative route involving macrocyclization with the regio‐ and stereoselective oxirane‐ring opening by the terminal amino group (Schemes 2 and 6). Properly N‐protected chiral trans‐oxirane precursors provided (2R,3R)‐macrocycles after a one‐pot deprotection‐macrocyclization step under moderate dilution (0.005–0.01M ). The best yields (65–85%) were achieved with trifluoroacetyl protection. Macrocyclization of the corresponding cis‐oxiranes was unsuccessful for steric reasons. Inversion at OH? C(3) via nucleophilic displacement of the cyclic sulfamidate derivative with NaNO₂ led to (2R,3S)‐macrocycles. The synthesized (?)‐(2R,3S)‐3‐hydroxycelacinnine ((?)‐ 1b ) was identical to the natural alkaloid.     

Folding‐Induced Folding: The Assembly of Aromatic Amide and 1,2,3‐Triazole Hybrid Helices

Folding‐induced folding for the construction of artificial hybrid helices from two different kinds of aromatic sequences is described. Linear compounds 1 a , 1 b , and 2 , containing one aromatic amide trimer or pentamer and one or two aromatic 1,2,3‐triazole tetramers, have been designed and synthesized. The trimeric and pentameric amide segments are driven by intramolecluar N?H???F hydrogen bonding to adopt a folded or helical conformation, whereas the triazole segment is intrinsically disordered. In organic solvents of low polarity, the amide foldamer segment induces the attached triazole segment(s) to fold through intramolecular stacking, leading to the formation of hybrid helices. The helical conformation of these hybrid sequences has been confirmed by ¹H and ¹⁹F NMR spectroscopy, UV/Vis spectroscopy, circular dichroism (CD) experiments, and theoretical calculations. It was found that the amide pentamer exhibits a stronger ability to induce the folding of the attached triazole segment(s) compared with that of the shorter trimer. Enantiomers (R)‐ 3 and (S)‐ 3 , which contain an R‐ or S‐(1‐naphthyl)ethylamino group at the end of a tetraamide segment, have also been synthesized. CD experiments showed that introduction of a chiral group caused the whole framework to produce a strong helicity bias. Density‐functional‐theory calculations on (S)‐ 3 suggested that this compound exists as a right‐handed (P) helix.     

α‐Propargyl amino acid‐derived optically active novel substituted polyacetylenes: Synthesis,secondary structures,and responsiveness to ions

Novel optically active substituted acetylenes HC? CCH₂CR¹(CO₂CH₃)NHR² [(S)‐/(R)‐ 1 : R¹ = H, R² = Boc, (S)‐ 2 : R¹ = CH₃, R² = Boc, (S)‐ 3 : R¹ = H, R² = Fmoc, (S)‐ 4 : R¹ = CH₃, R² = Fmoc (Boc = tert‐butoxycarbonyl, Fmoc = 9‐fluorenylmethoxycarbonyl)] were synthesized from α‐propargylglycine and α‐propargylalanine, and polymerized with a rhodium catalyst to provide the polymers with number‐average molecular weights of 2400–38,900 in good yields. Polarimetric, circular dichroism (CD), and UV–vis spectroscopic analyses indicated that poly[(S)‐ 1 ], poly[(R)‐ 1 ], and poly[(S)‐ 4 ] formed predominantly one‐handed helical structures both in polar and nonpolar solvents. Poly[(S)‐ 1a ] carrying unprotected carboxy groups was obtained by alkaline hydrolysis of poly[(S)‐ 1 ], and poly[(S)‐ 4b ] carrying unprotected amino groups was obtained by removal of Fmoc groups of poly[(S)‐ 4 ] using piperidine. Poly[(S)‐ 1a ] and poly[(S)‐ 4b ] also exhibited clear CD signals, which were different from those of the precursors, poly[(S)‐ 1 ] and poly[(S)‐ 4 ]. The solution‐state IR measurement revealed the presence of intramolecular hydrogen bonding between the carbamate groups of poly[(S)‐ 1 ] and poly[(S)‐ 1a ]. The plus CD signal of poly[(S)‐ 1a ] turned into minus one on addition of alkali hydroxides and tetrabutylammonium fluoride, accompanying the red‐shift of λ_max. The degree of λ_max shift became large as the size of cation of the additive. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Assemblies of 1D and 2D Copper(II) Chiral Coordination Polymers by Salicylaldehyde Schiff Bases: Synthesis,Crystal Structures,and Magnetic Properties

Reaction of CuCl₂ · 2H₂O with chiral Schiff bases and sodium dicyanamide led to the formation of two chiral copper(II) coordination polymers, namely [Cu₄(L¹)₂(dca)₄]_n ( 1 ) and [Cu₂(L²)(μ‐Cl)(dca)(H₂O)]_n · nH₂O ( 2 ) {H₂L¹ = (1R, 3S)‐N′,N′′‐bis[salicylidene]‐1,3‐diamino‐ 1,2,2‐trimethylcyclopentane, H₂L² = (1R, 3S)‐N′,N′′‐bis[3‐ethoxysalicylidene]‐1,3‐diamino‐ 1,2,2‐trimethylcyclopentane, dca = dicyanamide}. Both complexes were structurally characterized by elemental analyses, IR spectroscopy and single‐crystal X‐ray diffraction. Complex 1 exhibits a two‐dimensional polymeric structure formed by single dca bridging tetranuclear Cu₄ units. Complex 2 displays a left‐handed helical chain structure constructed from Cu₂ dimers with single dca bridges. The chirality of 1 and 2 was confirmed by circular dichroism (CD) measurements in solution. Both complexes exhibit strong antiferromagnetic couplings with J = –308(4) cm^–1 for 1 and J = –123(1) cm^–1 for 2 in 2–300 K.     

Asymmetric Syntheses of New Polyhydroxylated Quinolizidines: Cross‐Aldol Reactions of 7‐Oxabicyclo[2.2.1]heptan‐2‐one and 3a,4a,7a,7b‐Tetrahydro[1,3]dioxolo[4,5]furo[2,3‐d]isoxazole‐3‐carbaldehyde Derivatives

The cross‐aldolization of (−)‐(1S,4R,5R,6R)‐6‐endo‐chloro‐5‐exo‐(phenylseleno)‐7‐oxabicyclo[2.2.1]heptan‐2‐one ((−)‐ 25 ) and of (+)‐(3aR,4aR,7aR,7bS)‐ ((+)‐ 26 ) and (−)‐(3aS,4aS,7aS,7bR)‐3a,4a,7a,7b‐tetrahydro‐6,6‐dimethyl[1,3]dioxolo[4,5]furo[2,3‐d]isoxazole‐3‐carbaldehyde ((−)‐ 26 ) was studied for the lithium enolate of (−)‐ 25 and for its trimethylsilyl ether (−)‐ 31 under Mukaiyama's conditions (Scheme 2). Protocols were found for highly diastereoselective condensation giving the four possible aldols (+)‐ 27 (`anti'), (+)‐ 28 (`syn'), 29 (`anti'), and (−)‐ 30 (`syn') resulting from the exclusive exo‐face reaction of the bicyclic lithium enolate of (−)‐ 25 and bicyclic silyl ether (−)‐ 31 . Steric factors can explain the selectivities observed. Aldols (+)‐ 27 , (+)‐ 28 , 29 , and (−)‐ 30 were converted stereoselectively to (+)‐1,4‐anhydro‐3‐{(S)‐[(tert‐butyl)dimethylsilyloxy][(3aR,4aR,7aR,7bS)‐3a,4a,7a,7b‐tetrahydro‐6,6‐dimethyl[1,3]dioxolo[4,5]‐furo[2,3‐d]isoxazol‐3‐yl]methyl}‐3‐deoxy‐2,6‐di‐O‐(methoxymethyl)‐α‐D ‐galactopyranose ((+)‐ 62 ), its epimer at the exocyclic position (+)‐ 70 , (−)‐1,4‐anhydro‐3‐{(S)‐[(tert‐butyl)dimethylsilyloxy][(3aS,4aS,7aS,7bR)‐3a,4a,7a,7b‐tetrahydro‐6,6‐dimethyl[1,3]dioxolo[4,5]furo[2,3‐d]isoxazol‐3‐yl]methyl}‐3‐deoxy‐2,6‐di‐O‐(methoxymethyl)‐α‐D ‐galactopyranose ((−)‐ 77 ), and its epimer at the exocyclic position (+)‐ 84 , respectively (Schemes 3 and 5). Compounds (+)‐ 62 , (−)‐ 77 , and (+)‐ 84 were transformed to (1R,2R,3S,7R,8S,9S,9aS)‐1,3,4,6,7,8,9,9a‐octahydro‐8‐[(1R,2R)‐1,2,3‐trihydroxypropyl]‐2H‐quinolizine‐1,2,3,7,9‐pentol ( 21 ), its (1S,2S,3R,7R,8S,9S,9aR) stereoisomer (−)‐ 22 , and to its (1S,2S,3R,7R,8S,9R,9aR) stereoisomer (+)‐ 23 , respectively (Schemes 6 and 7). The polyhydroxylated quinolizidines (−)‐ 22 and (+)‐ 23 adopt `trans‐azadecalin' structures with chair/chair conformations in which H−C(9a) occupies an axial position anti‐periplanar to the amine lone electron pair. Quinolizidines 21 , (−)‐ 22 , and (+)‐ 23 were tested for their inhibitory activities toward 25 commercially available glycohydrolases. Compound 21 is a weak inhibitor of β‐galactosidase from jack bean, of amyloglucosidase from Aspergillus niger, and of β‐glucosidase from Caldocellum saccharolyticum. Stereoisomers (−)‐ 22 and (+)‐ 23 are weak but more selective inhibitors of β‐galactosidase from jack bean.     

Racemic and chiral 1‐[N‐(chloro­acetyl)carbamoylamino]‐2,3‐dihydro‐1H‐inden‐2‐yl chloroacetate

In the racemic crystals of (1S,2R)‐ or (1R,2S)‐1‐[N‐(chloro­acetyl)­carbamoyl­amino]‐2,3‐di­hydro‐1H‐inden‐2‐yl chloro­acetate, C₁₄H₁₄Cl₂N₂O₄, (I), the enantiomeric mol­ecules form a dimeric structure via the N—H?O cyclic hydrogen bond of the carbamoyl moieties. In the chiral crystals of (—)‐(1S,2R)‐1‐[N‐(chloro­acetyl)­carbamoyl­amino]‐2,3‐di­hydro‐1H‐inden‐2‐yl chloro­acetate, C₁₄H₁₄Cl₂N₂O₄, (II), the N—­H?O intermolecular hydrogen bond forms a zigzag chain around the twofold screw axis. The melting points and calculated densities of (I) and (II) are 446 and 396 K, and 1.481 and 1.445 Mg m^?3, respectively.     

Chiral (Diphosphonite)platinum Complexes in Asymmetric Hydroformylation

The chiral diphosphonite ligand (11bR,11′bR)‐4,4′‐(9,9‐dimethyl‐9H‐xanthene‐4,5‐diyl)bis[dinaphtho[2,1‐d:1′,2′‐f][1,3,2]dioxaphosphepin] ((R,R)‐XantBino; (R)‐ 1 ), based on a rigid xanthene backbone, was applied in the Pt/Sn‐catalyzed hydroformylation of styrene ( 4a ), 4‐methylstyrene ( 4b ), vinyl acetate ( 4c ), and allyl acetate ( 4d ), by using a Pt/Sn ratio of 1 : 1. High ee of up to 80% were observed, along with good regioselectivities towards the desired branched aldehydes. For styrene, an interesting inversion in the stereoselection process was observed at elevated temperatures, and a mechanism is proposed considering the temperature dependence of the regioselectivity. The complex [PtCl₂{(S,S)‐XantBino}] ((S)‐ 2 ) was characterized by X‐ray crystal‐structure analysis, revealing an unusual out‐of‐plane ligand coordination of the metal fragment. The complex [PtCl(SnCl₃){(R,R)‐XantBino}] ((R)‐ 3 ) was characterized by means of ³¹P‐NMR spectroscopy.     

An Inherently Chiral Au24 Framework with Double‐Helical Hexagold Strands

2,3‐bis(diphenylphosphino)butane enantiomers (chiraphos, L) used as chiral auxiliaries results in the preferential formation of an unprecedented Au₂₄ framework with inherent chirality. The crystal structure of [Au₂₄L₆Cl₄]²⁺ ( 1 ) has a square antiprism‐like octagold core twinned by two helicene‐like hexagold motifs, where the inherent chirality is associated with the helical arrangement. The clusters carrying (R,R)‐ and (S,S)‐ diphosphines had right‐ and left‐handed strands, respectively. Circular dichroism spectra showed peaks in the visible to near‐IR region, some of which did not coincide with absorption bands, suggesting the enantiomeric Au₂₄ frameworks possess unique chiroptical properties. The Au₂₄ frameworks were thermally robust, which could be attributed to the superatomic concept (18 e^? system) and the steric constraint effects of the bridging ligand units.     

Syntheses,Structures, and Catalytic Reactions of Palladium Adducts of Chiral Diphosphines That Contain a Rhenium Stereocenter in the Backbone

Reactions of the title diphosphines [(η⁵‐C₅H₄PPh₂)Re(NO)(PPh₃)((CH₂)_nPPh₂)] (n=0, (R)‐ 1 ; n=1, racemic or (S)‐ 2 ) with [PdCl₂(PhCN)₂] give the palladium/rhenium chelate complexes [(η⁵‐C₅H₄PPh₂)Re(NO)(PPh₃)((μ‐CH₂)_nPPh₂)PdCl₂] (n=0, (S)‐ 5 ; n=1, racemic or (S)‐ 6 ) in 75–92% yield. The crystal structure of racemic 6 shows a twisted‐boat conformation of the chelate ring, giving a chiral pocket very different from that in a related rhodium chelate. However, NOE experiments suggest a similar ensemble of conformations in solution. Catalysts are generated from various combinations of a) Pd(OAc)₂ and (R)‐ 1 or (S)‐ 2 (1 : 2), b) (S)‐ 5 or (S)‐ 6 and (R)‐ 1 or (S)‐ 2 (1 : 2), or c) (i‐Bu)₂AlH with the preceding recipes. These factors effect the Heck arylation of 2,3‐dihydrofuran with phenyl trifluoromethylsulfonate. In contrast to analogous reactions with (R)‐binap (=(R)‐2,2′‐bis(diphenylphosphanyl)‐1,1′‐binaphthalene), the major product 2‐phenyl‐2,3‐dihydrofuran is nearly racemic (≤12% ee).     

Novel P‐Stereogenic PCP Pincer‐Aryl Ruthenium(II) Complexes and Their Use in the Asymmetric Hydrogen Transfer Reaction of Acetophenone

Achiral P‐donor pincer‐aryl ruthenium complexes ([RuCl(PCP)(PPh₃)]) 4c , d were synthesized via transcyclometalation reactions by mixing equivalent amounts of [1,3‐phenylenebis(methylene)]bis[diisopropylphosphine] ( 2c ) or [1,3‐phenylenebis(methylene)]bis[diphenylphosphine] ( 2d ) and the N‐donor pincer‐aryl complex [RuCl{2,6‐(Me₂NCH₂)₂C₆H₃}(PPh₃)], ( 3 ; Scheme 2). The same synthetic procedure was successfully applied for the preparation of novel chiral P‐donor pincer‐aryl ruthenium complexes [RuCl(P*CP*)(PPh₃)] 4a , b by reacting P‐stereogenic pincer‐arenes (S,S)‐[1,3‐phenylenebis(methylene)]bis[(alkyl)(phenyl)phosphines] 2a , b (alkyl=ⁱPr or ^tBu, P*CHP*) and the complex [RuCl{2,6‐(Me₂NCH₂)₂C₆H₃}(PPh₃)], ( 3 ; Scheme 3). The crystal structures of achiral [RuCl(equation/tex2gif-sup-3.gifPCP)(PPh₃)] 4c and of chiral (S,S)‐[RuCl(equation/tex2gif-sup-6.gifPCP)(PPh₃)] 4a were determined by X‐ray diffraction (Fig. 3). Achiral [RuCl(PCP)(PPh₃)] complexes and chiral [RuCl(P*CP*)(PPh₃)] complexes were tested as catalyst in the H‐transfer reduction of acetophenone with propan‐2‐ol. With the chiral complexes, a modest enantioselectivity was obtained.