Reductive Amination of Carbonyl Compounds with Ammonia and Hydrogenation of Nitriles to Primary Amines with Heterogeneous Cobalt Catalysts

Reductive amination of aldehydes/ketones with aqueous NH3 and hydrogenation of nitriles to primary amines with Co catalysts were reported. Co@NC-700 exhibited remarkable activity and high selectivity for the reductive amination of aldehydes/ketones with aqueous NH3 and the hydrogenation of nitriles to primary amines. Several primary amines can be obtained with good to excellent yields via the reductive amination of aldehydes/ketones and the hydrogenation of nitriles. The nitrogen-doped carbon(C)-supported Co@NC-700 metal catalyst was prepared via the pyrolysis of bioMOF Co/adenine in activated C. Co@NC-700 can be reused five times without evident loss of activity.     

One-pot reductive mono-N-alkylation of aniline and nitroarene derivatives using aldehydes

One-pot reductive mono-N-alkylation of aniline and nitroarene derivatives using various aldehydes by Pd/C catalyst in aqueous 2-propanol solvent with ammonium formate as in situ hydrogen donor is illustrated. The reaction proceeded smoothly and selectively with excellent yield at room temperature. Our protocol presents a facile, economical, and environmentally benign alternative for reductive amination.     

General Reductive Amination of Aldehydes and Ketones with Amines and Nitroaromatics under H2 by Recyclable Iridium Catalysts

Heterogeneous iridium catalysts were prepared and applied for the reductive amination of aldehydes and ketones with nitroaromatics and amines using H₂ . The iridium catalysts were prepared by pyrolysis of ionic liquid 1‐methyl‐3‐cyanomethylimidazoulium chloride ([MCNI ]Cl) with iridium chloride (IrCl₃ ) in activated carbons. Iridium particles were well dispersed and stable in the N‐doped carbon materials from [MCNI ]Cl with activated carbon. The Ir@NC (600‐2h) catalyst was found to be highly active and selective for the reductive amination of aldehydes and ketones using H₂ and a variety of nitrobenzenes and amines were selectively converted into the corresponding secondary and tertiary amines. The Ir@NC (600‐2h) catalyst can be reusable several times without evident deactivation.     

The reductive amination of aldehydes and ketones by catalytic use of dibutylchlorotin hydride complex

The reductive amination of aldehydes or ketones using Ph(2)SiH(2) or PhSiH(3) has been effectively promoted by the direct use of Bu(2)SnClH-pyridine N-oxide as a catalyst; this method has advantages in terms of its mild conditions and wide application to various carbonyls and amines, including aliphatic examples.     

Production of Primary Amines by Reductive Amination of Biomass‐Derived Aldehydes/Ketones

Transformation of biomass into valuable nitrogen‐containing compounds is highly desired, yet limited success has been achieved. Here we report an efficient catalyst system, partially reduced Ru/ZrO₂, which could catalyze the reductive amination of a variety of biomass‐derived aldehydes/ketones in aqueous ammonia. With this approach, a spectrum of renewable primary amines was produced in good to excellent yields. Moreover, we have demonstrated a two‐step approach for production of ethanolamine, a large‐market nitrogen‐containing chemical, from lignocellulose in an overall yield of 10 %. Extensive characterizations showed that Ru/ZrO₂‐containing multivalence Ru association species worked as a bifunctional catalyst, with RuO₂ as acidic promoter to facilitate the activation of carbonyl groups and Ru as active sites for the subsequent imine hydrogenation.     

Reductive Amination of Aldehydes and Ketones with Sodium Triacetoxyborohydride. Studies on Direct and Indirect Reductive Amination Procedures(1)

Sodium triacetoxyborohydride is presented as a general reducing agent for the reductive amination of aldehydes and ketones. Procedures for using this mild and selective reagent have been developed for a wide variety of substrates. The scope of the reaction includes aliphatic acyclic and cyclic ketones, aliphatic and aromatic aldehydes, and primary and secondary amines including a variety of weakly basic and nonbasic amines. Limitations include reactions with aromatic and unsaturated ketones and some sterically hindered ketones and amines. 1,2-Dichloroethane (DCE) is the preferred reaction solvent, but reactions can also be carried out in tetrahydrofuran (THF) and occasionally in acetonitrile. Acetic acid may be used as catalyst with ketone reactions, but it is generally not needed with aldehydes. The procedure is carried out effectively in the presence of acid sensitive functional groups such as acetals and ketals; it can also be carried out in the presence of reducible functional groups such as C-C multiple bonds and cyano and nitro groups. Reactions are generally faster in DCE than in THF, and in both solvents, reactions are faster in the presence of AcOH. In comparison with other reductive amination procedures such as NaBH(3)CN/MeOH, borane-pyridine, and catalytic hydrogenation, NaBH(OAc)(3) gave consistently higher yields and fewer side products. In the reductive amination of some aldehydes with primary amines where dialkylation is a problem we adopted a stepwise procedure involving imine formation in MeOH followed by reduction with NaBH(4).     

Direct reductive amination of aldehydes and ketones using phenylsilane: catalysis by dibutyltin dichloride

A procedure for direct reductive amination of aldehydes and ketones was developed which uses phenylsilane as a stoichiometric reductant and dibutyltin dichloride as a catalyst. Suitable amines included anilines and dialkylamines but not monoalkylamines.     

Impregnated palladium on magnetite as catalyst for multicomponent reductive amination reactions and other related reducing processes

The impregnated palladium on magnetite catalyst is a versatile system for different reduction processes using inexpensive polymehtylhydrosiloxane, including multicomponent reductive amination reactions, and aldehyde, imine, sulfinimide and sulfoxide reductions. This catalyst avoids the use of any type of expensive and quite expensive organic ligand, showing excellent yields, under mild reaction conditions. The catalyst is easily removed from the reaction medium, just by using a magnet. The catalytic system is very selective permitting the discrimination between ketones and aldehydes in the reductive amination process.     

Direct Reductive Amination of Aldehydes and Ketones with 2,4-Ionene-Based Borohydride Exchange Resin as a Novel Polymer-Supported Reducing Agent

Direct reductive amination of aldehydes and ketones were accomplished efficiently using high-capacity, ionene-based, polymer-supported borohydride reagent in isopropyl alcohol at reflux under neutral conditions. The reagent is easily prepared by mixing aqueous solution of 2,4-ionene bromide with an alkaline solution of sodium borohydride at room temperature. The generality of reaction was established using both aliphatic and aromatic aldehydes, ketones, and amines.     

Reductive Amination of Aldehydes and Ketones Under Heterogeneous and Solvent-Free Conditions Using Sodium-Borohydride and Silica-Gel–Supported Sulfuric Acid

A regioselective and convenient procedure for preparation of amines by reductive amination of aldehydes and ketones using sodium borohydride in the presence of sulfuric acid supported on silica gel as an active, inexpensive, and recoverable catalyst under heterogeneous and solvent-free conditions at room temperature is described.     

Brevibacterium epidermidis催化酮不对称还原胺化合成(S)-手性胺

光学纯手性胺是一类非常重要的手性化学品,作为手性砌块和手性拆分剂广泛用于医药、农业化学品、精细化学品等产品的合成中.据统计,美国FDA近年来批准的约40％药物中都含有一个或多个手性胺结构单元.胺脱氢酶(AmDH)是由氨基酸脱氢酶改造而来的一类催化酮不对称还原胺化的新酶,其在手性胺的合成中展现出较强的潜力,已引起国内外学术界和工业界的广泛关注.这是因为该酶能够利用廉价的无机铵为胺供体,且具有催化效率高、原子经济性好和环境友好等优点.迄今为止已经有数个高效的胺脱氢酶被成功开发和报道,但是这些通过蛋白质工程改造的胺脱氢酶均为(R)-选择性,因此只能合成(R)-选择性的手性胺,遗憾的是还未见有(S)-选择性胺脱氢酶的报道.因此,本文主要目的是期望从自然环境中鉴定能够不对称还原胺化酮合成(S)-手性胺的微生物,进而从中分离得到能够以无机铵作为胺供体合成(S)-手性胺的(S)-选择性酶.本文首先利用苯乙胺作为唯一氮源,从土壤中筛选能够利用苯乙胺生长的菌株,进而利用苯乙酮作为初筛底物对得到的菌株进行胺化能力筛选,再利用(4-氟苯基)丙酮作为模式底物进行进一步的筛选.幸运的是,我们获得了能够利用无机铵作为胺供体催化(4-氟苯基)丙酮不对称还原胺化合成(S)-4-氟-α-甲基苯乙胺的菌株,经过16S RNA鉴定为表皮短杆菌,命名为B.epidermidis ECU1015.接下来,我们对B.epidermidis ECU1015催化的胺化反应中的关键参数如胺基供体及其最适浓度、反应温度、pH值和底物浓度等进行了优化,确定最佳反应条件:胺供体为NH4Cl(1.25 mol/L),反应温度为30°C,KPB缓冲液(200 mmol/L,pH 7.5),底物浓度10 mmol/L.最后,在最适的反应条件下,我们对B.epidermidis ECU1015催化的底物谱进行了研究.结果表明,该微生物不能催化大位阻芳香酮和链状酮的胺化,对位阻较小的苯乙酮及(4-氟苯基)丙酮具有较好的还原胺化能力,而且对苯环上带有吸电子取代基的酮化合物具有更好的转化效果.经手性分析,所有生成的手性胺均为(S)-构型,产品的光学纯度均>99％.B.epidermidis催化酮不对称胺化所形成的产物构型均为(S)-选择性,这不同于已报道的(R)-选择性胺脱氢酶.该菌株的发现为(S)-选择性胺脱氢酶的进一步鉴定奠定了一定的研究基础,相关蛋白的分离纯化工作正在进行.     

Knölker's iron complex: an efficient in situ generated catalyst for reductive amination of alkyl aldehydes and amines

An aminated series: a well-defined iron-catalyzed reductive amination reaction of aldehydes and ketones with aliphatic amines using molecular hydrogen is presented. Under mild conditions, good yields for a broad range of alkyl ketones as well as aldehydes were achieved.     

Nanoparticles and single atoms of cobalt synergistically enabled low-temperature reductive amination of carbonyl compounds

Low-temperature and selective reductive amination of carbonyl compounds is a highly promising approach to access primary amines. However, it remains a great challenge to conduct this attractive route efficiently over earth-abundant metal-based catalysts. Herein, we designed several Co-based catalysts (denoted as Co@C–N(x), where x represents the pyrolysis temperature) by the pyrolysis of the metal–organic framework ZIF-67 at different temperatures. Very interestingly, the prepared Co@C–N(800) could efficiently catalyze the reductive amination of various aldehydes/ketones to synthesize the corresponding primary amines with high yields at 35 °C. Besides non-noble metal and mild temperature, the other unique advantage of the catalyst was that the substrates with different reduction-sensitive groups could be converted into primary amines selectively because the Co-based catalyst was not active for these groups at low temperature. Systematic analysis revealed that the catalyst was composed of graphene encapsulated Co nanoparticles and atomically dispersed Co–N_x sites. The Co particles promoted the hydrogenation step, while the Co–N_x sites acted as acidic sites to activate the intermediate (Schiff base). The synergistic effect of metallic Co particles and Co–N_x sites is crucial for the excellent performance of the catalyst Co@C–N(800). To the best of our knowledge, this is the first study on efficient synthesis of primary amines via reductive amination of carbonyl compounds over earth-abundant metal-based catalysts at low temperature (35 °C).

An earth-abundant Co-based catalyst, Co@C–N(800), could efficiently catalyze the reductive amination of carbonyl compounds into primary amines at 35 °C owing to the synergistic effect of Co nanoparticles and atomically dispersed Co–N_x sites.     

Reductive Amination of Aldehydes and Ketones in a Heterogeneous System in THF and under Solvent-Free Conditions Using Sodium Borohydride-Silica Phosphoric Acid

Summary. A chemoselective, fast, efficient, and high yielding method for the preparation of amines by reductive amination of aldehydes and ketones using sodium borohydride in the presence of silica phosphoric acid in THF and under solvent-free conditions at room temperature is described.     

Polymer-supported triacetoxyborohydride: a novel reagent of choice for reductive amination

A novel polymer-supported triacetoxyborohydride reagent for reductive amination of aldehydes and ketones is reported. The bound reagent was found to be shelf-stable and provided broad scope and reactivity in reductive amination reactions under mild reaction conditions. Streamlined protocols for its application in reductive amination reactions using both primary and secondary amines are described.     

Direct and indirect reductive amination of aldehydes and ketones with solid acid-activated sodium borohydride under solvent-free conditions

A simple and convenient procedure for reductive amination of aldehydes and ketones using sodium borohydride activated by boric acid, p-toluenesulfonic acid monohydrate or benzoic acid as reducing agent under solvent-free conditions is described.     

Reductive Amination of Aldehydes and Ketones with 2-(Tributylamino)-ethoxyborohydride

A new ionic liquid is presented as a medium and reducing agent for the reductive amination of aldehydes and ketones.     

Tetrahydro‐1,5‐benzoxazepines and tetrahydro‐1H‐1,5‐benzodiazepines by a tandem reduction‐reductive amination reaction

A tandem reduction‐reductive amination reaction has been applied to the synthesis of (±)‐4‐alkyl‐2,3,4,5‐tetrahydro‐1,5‐benzoxazepines and (±)‐4‐alkyl‐1‐benzoyl‐2,3,4,5‐tetrahydro‐1H‐1,5‐benzodiazepines. The nitro aldehydes and ketones required for 1,5‐benzoxazepine ring closures were prepared by nucleophilic aromatic substitution of the alkoxides from several 3‐buten‐1‐ol derivatives with 2‐fluoro‐1‐nitrobenzene followed by ozonolysis. Precursors for the 1,5‐benzodiazepines were prepared by similar addition of N‐(3‐butenyl)benzamide anions to 2‐fluoro‐1‐nitrobenzene followed by ozonolysis. Catalytic hydrogenation of the nitro carbonyl compounds using 5% palladium‐on‐carbon in methanol then gave the target heterocycles by a tandem reduction‐reductive amination sequence. The 1,5‐benzoxazepines were isolated in high yield following chromatographic purification; the 1,5‐benzodiazepines were isolated as solids directly from the hydrogenation mixture and possessed differentiated functionality on the two nitrogen atoms.     

Reductive amination of furfural toward furfurylamine with aqueous ammonia under hydrogen over Ru-supported catalyst

Poly(N-vinyl-2-pyrrolidone)-capped ruthenium-supported hydroxyapatite (Ru-PVP/HAP) shows significant activity for the synthesis of furfurylamine (FAM) via the reductive amination of furfural. As-prepared 5 wt% Ru-PVP/HAP affords 50 % yield of FAM in 25 % NH₃ aqueous solution under pressurized H₂ gas (2.5 atm), and the highest yield approaches 60 % at 4.0 H₂ atm. Comparison between the activities over four Ru-supported HAP catalysts prepared with different methods and the results of X-ray absorption spectroscopy suggested that the metallic Ru cluster is the active center for the reductive amination of furfural. Transmission electron microscope and inductively-coupled plasma analysis indicated that the as-prepared 5 wt% Ru-PVP/HAP catalyst possessed 4.0 wt% PVP-capped Ru clusters with average diameter of 1.7 ± 0.3 nm on HAP support. It was also demonstrated that the reductive amination approach with Ru-PVP/HAP catalyst, NH₃ aq. and pressurized H₂ gas has capability for transformation of aromatic aldehydes to the corresponding aromatic amines. According to these results, it is concluded that Ru(0) cluster supported on HAP will represent a suitable catalyst for widely-usable reductive amination to convert an aldehyde functionality towards an amine.     

Reductive Amination of Aldehydes and Ketones with Primary Amines by Using Lithium Amidoborane as Reducing Reagent

A variety of secondary amines were obtained in high isolated yields in the reductive amination of aldehydes and ketones by using lithium amidoborane as reducing agent. Compared to ammonia borane, lithium amidoborane has higher reducibility, and thus, exhibits faster reaction rate.