Rationally Investigating the Influence of T1 Location on Electroluminescence Performance of Aryl Amine Modified Phosphine Oxide Materials

The correspondence between triplet location effect and host‐localized triplet–triplet annihilation and triplet–polaron quenching effects was performed on the basis of a series of naphthyldiphenylamine (DPNA)‐modified phosphine oxide hosts. The number and ratio of DPNA and diphenylphosphine oxide was adjusted to afford symmetrical and unsymmetrical molecular structures and different electronic environments. As designed, the first triplet (T₁) states were successfully localized on the specific DPNA chromophores. Owing to the meso‐ and multi‐insulating linkages, identical optical properties and comparable electrical performance was observed, including the same first singlet (S₁) and T₁ energy levels to support the similar singlet and triplet energy transfer and the close frontier molecular orbital energy levels. This established the basis of rational investigation on T₁ location effect without interference from other optoelectronic factors.     

Dibenzocarbazolediimides: Synthesis,Solid Structure,Self‐Assembly Behavior,and Optoelectronic Properties

Both planar and nonplanar polycyclic aromatic hydrocarbons (PAHs) have attracted attention owing to their potential applications in optoelectronic materials. Four twist benzopicenediimides with good optoelectronic properties have been reported previously. Following on from this work, four functionalized dibenzocarbazoles have been synthesized and reported herein. The fluorescence quantum yields of these compounds were high in dichloromethane and moderate in the solid state. They have interesting self‐assembling behavior and tunable packing motifs in single crystals obtained by introducing different functional groups. Their good optoelectronic properties make them potential candidates for organic devices, bioimaging, and biolabeling.     

Effect of End‐capping Functional Groups on the Optoelectronic Properties of Oligothiophene Derivatives

Five novel oligothiophene derivatives end‐capped by different functional groups (R=ethoxyl ( EtOP3T ), methylsulfanyl ( MSP3T ), acetyl ( AcP3T ), methylsulfonyl ( MSO₂P3T ) and biphenyl ( BP3T ) groups) were synthesized. They were characterized by Hnuclear magnetic resonanceH (P¹PH NMR), Hmass spectrometryH (MS) and Fourier transform Infra‐red spectra (IR). The relationship between end‐capping functional groups and optoelectronic properties of them was investigated. It was found that the compound with sulfonyl group in the molecular structure ( MSO R ₂ R P3T ) shows the highest oxidation stability (also supported by theoretical calculations) and best thermal stability among the five compounds. The results of scanning electron microscope (SEM) interpret that MSO R ₂ R P3T displays excellent ability of self‐film forming. This reveals that it could be a potential candidate for thin film material. The liquid crystal property of MSO R ₂ R P3T was characterized by polarized optical microscopy analysis (POM) and X‐ray diffraction (XRD). The results of this paper provide useful information for the design of tailored oligothiophene derivatives for devices.     

Mapping the Excited‐State Potential Energy Surface of a Photomolecular Motor

A detailed understanding of the operation and efficiency of unidirectional photomolecular rotary motors is essential for their effective exploitation in molecular nanomachines. Unidirectional motion relies on light‐driven conversion from a stable ( 1 a ) to a metastable ( 1 b ) conformation, which then relaxes through a thermally driven helix inversion in the ground state. The excited‐state surface has thus far only been experimentally characterised for 1 a . Here we probe the metastable, 1 b , excited state, utilising ultrafast transient absorption and femtosecond stimulated Raman spectroscopy. These reveal that the “dark” excited‐state intermediate between 1 a and 1 b has a different lifetime and structure depending on the initial ground‐state conformation excited. This suggests that the reaction coordinate connecting 1 a to 1 b differs to that for the reverse photochemical process. The result is contrasted with earlier calculations.     

Synthesis and Optoelectronic Properties of Hexahydroxylated 10‐O‐R‐Substituted Anthracenes via a New Modification of the Friedel–Crafts Reaction Using O‐Protected ortho‐Acetal Diarylmethanols

A new modification of the Friedel–Crafts type intramolecular cyclization involving O‐protected ortho‐acetal diarylmethanols as a new type of reactant, was carried out for the first time in a medium containing a large amount of water at room temperature and enabled synthesis of a series of electron‐rich, hexahydroxylated 10‐O‐R‐substituted anthracenes, where R is an alkyl (Me, nBu, n‐C₁₆H₃₃) or arylalkyl group (CH₂Ph, CH₂‐2‐Napht, CH₂C₆H₄CH₂OAr) and also evaluation of their electronic and optoelectronic properties in solution, crystal, and solid thin film. In this transformation, a central 10‐O‐R‐substituted benzene ring was formed, fused to rings originating from two independent aromatic aldehydes. The reaction proceeded via two identified mechanisms involving acetal and/or free aldehyde groups. The acid sensitive acetal and dibenzyl alkoxy functions have never been used together in the intramolecular Friedel–Crafts type cyclization. The new compounds revealed deep blue fluorescence and quantum yields in solution around 0.3. The electrical properties investigated for thin films obtained by vacuum deposition on glass were 10‐O‐R‐substituent dependent and showed much faster transient current decay in the case of the 10‐O‐CH₂Ph derivative than for the material with a 10‐O‐Me substituent (the lifetime of charge carriers was 25 times shorter in this case). The AFM images of thin films, Stokes shifts, and X‐ray analysis of π‐stacking interactions in crystals of the new materials have been also obtained.     

Synthesis,Optical, and Electrochemical Properties of the High‐Molecular‐Weight Conjugated Polycarbazoles

Summary: A kind of novel dibromocarbazole monomer bearing three alkyl chains was prepared. Two strategies were developed to improve the solubility and molecular weight of carbazole polymers. One was the polymerization of N‐octyl‐2,7‐bis(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)carbazole with the alkylated dibromocarbazole. Another one was the polymerization of N‐octyl‐2,7‐bis(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)carbazole with N‐octyl‐3,6‐dibromocarbazole. All the polymerizations were carried out under palladium‐catalyzed Suzuki polycondensation (SPC) conditions. Through using carbazole monomer bearing three alkyl chains to polymerize, we have successfully boosted the number‐average molecular weight of 2,7‐linked carbazole polymers from not more than 5 to 67 kDa. The high‐molecular‐weight polymers were obtained in high yields and displayed good solubility in common organic solvents. Their optical, electrochemical, and thermal properties were also reported.

Preparation of carbazole polymers by Suzuki polycondensation.     

Perylene‐based Solution‐processable Conjugated Molecules for Optoelectronic Applications: Synthesis and Comparison of Different Substituents on the Optical,Thermal, and Electrochemical Properties

A series of small organic molecules were synthesized by exploiting the bay and imide positions of the perylene nucleus. The synthesized compounds 1 – 11 were characterized by spectroscopic and elemental analyses. These molecules show yellowish color in solution and are highly soluble in dichloromethane. Compound 7 shows a bandgap of 1.7 eV and a Stokes shift of 27. From these results, we infer that this compound can serve as structural template in the design of organic electronics. Moreover, compound 7 shows higher T_d (370°C) and T_g (132°C) values, which reflect its high thermal stability.     

A High‐Energy Charge‐Separated State of 1.70 eV from a High‐Potential Donor–Acceptor Dyad: A Catalyst for Energy‐Demanding Photochemical Reactions

A high potential donor–acceptor dyad composed of zinc porphyrin bearing three meso‐pentafluorophenyl substituents covalently linked to C₆₀, as a novel dyad capable of generating charge‐separated states of high energy (potential) has been developed. The calculated energy of the charge‐separated state was found to be 1.70 eV, the highest reported for a covalently linked porphyrin–fullerene dyad. Intramolecular photoinduced electron transfer leading to charge‐separated states of appreciable lifetimes in polar and nonpolar solvents has been established from studies involving femto‐ to nanosecond transient absorption techniques. The high energy stored in the form of charge‐separated states along with its persistence of about 50–60 ns makes this dyad a potential electron‐transporting catalyst to carry out energy‐demanding photochemical reactions. This type of high‐energy harvesting dyad is expected to open new research in the areas of artificial photosynthesis especially producing energy (potential) demanding light‐to‐fuel products.     

Incorporation of 2,6‐Connected Azulene Units into the Backbone of Conjugated Polymers: Towards High‐Performance Organic Optoelectronic Materials

Azulene is a promising candidate for constructing optoelectronic materials. An effective strategy is presented to obtain high‐performance conjugated polymers by incorporating 2,6‐connected azulene units into the polymeric backbone, and two conjugated copolymers P(TBAzDI‐TPD) and P(TBAzDI‐TFB) were designed and synthesized based on this strategy. They are the first two examples for 2,6‐connected azulene‐based conjugated polymers and exhibit unipolar n‐type transistor performance with an electron mobility of up to 0.42 cm² V^?1 s^?1, which is among the highest values for n‐type polymeric semiconductors in bottom‐gate top‐contact organic field‐effect transistors. Preliminary all‐polymer solar cell devices with P(TBAzDI‐TPD) as the electron acceptor and PTB7‐Th as the electron donor display a power conversion efficiency of 1.82 %.     

Diradical Character Tuning for the Third‐Order Nonlinear Optical Properties of Quinoidal Oligothiophenes by Introducing Thiophene‐S,S‐dioxide Rings

To create a design guideline for efficient third‐order nonlinear optical (NLO) molecules, the chain‐length (n) dependences of the diradical character y and the longitudinal second hyperpolarizability γ of quinoidal oligothiophenes (QTs), from monomers to octamers, involving thiophene‐S,S‐dioxide rings are investigated by using the density functional theory method. It turns out that the diradical character of the modified QTs is reduced as compared to those of the pristine QTs. By introducing an appropriate number of oxidized rings into the QT framework, intermediate y values can be achieved even in the systems with large values of n, in which the pristine QTs are predicted to have pure diradical character. Such intermediate diradical oligomers are shown to exhibit enhanced γ values as compared to the pristine QTs with the same value for n. From the calculation results, the introduction of the optimal number of thiophene‐S,S‐dioxide rings is predicted to be an efficient chemical modification for optimizing the third‐order NLO properties of open‐shell QTs through tuning the diradical characters.     

Evaluation of Non‐covalent Binding Energies and Optoelectronic Properties of New CuBr2(C6H7N)2 Complex: DFT Approaches

For the first time, the structural and optoelectronic properties of a new complex formulated as CuBr₂(C₆H₇N)₂ ( 1 ) [trans‐dibromidobis(3‐methylpyridine‐κN) copper(II)] were studied by density functional theory (DFT) calculations. They are performed using B3LYP through the Gaussian 09 program and also with full potential linearized augmented plane wave (FP‐LAPW) methods within the Generalized Gradient Approximation (GGA) and Hartree‐Fock (HF) theory by the Wien2k package. The neutral monomeric complex participates in a variety of non‐covalent interactions, including hydrogen bonding and π stacking to create a 2D coordinate plane. The binding energy value of the non‐covalent interactions responsible for the crystalline network formation of 1 were calculated using the method of dispersion corrected density functional theory (DFT‐D). In this method, the independent smallest fragment (monomer) and subsequently the related network, including seven monomers bearing all non‐covalent interactions were optimized. The results demonstrate that hydrogen bonds, especially non‐conventional C–H ··· Br interactions, govern the network formation along the a and c axes. It can be mentioned because of these directed interactions, increasing of charge transfer along x and z directions results in increasement of the absorption and refractive index along y and z directions, and vice versa. The results of band structure show indirectly and directly the nature of the bandgap within GGA and HF, respectively. The bandgap value of CuBr₂(C₆H₇N)₂ is comparable to those of binary semiconductor compounds. DOSs spectra reveal that 3d Cu, 4p Br, and 2p C states play important roles in the optical transitions of the electrons. The calculated electronic absorption of the UV/Vis spectrum shows six major electron‐transition bands derived from d → d (ligand field) n → n, n → π*, π → n, and σ → n MLCT and LMCT transitions. The calculated absorption spectrum of the titled complex through FP‐LAPW within GGA method shows good consistency with the B3LYP/def2‐TZVP/6‐311+G(d,p) method. Our calculated birefringence results show that 1 has capability of nonlinear optical, which can be used in the nonlinear optoelectronic devices.     

Aromaticity Effects on the Profiles of the Lowest Triplet‐State Potential‐Energy Surfaces for Rotation about the CC Bonds of Olefins with Five‐Membered Ring Substituents: An Example of the Impact of Baird’s Rule

A density functional theory study on olefins with five‐membered monocyclic 4n and 4n+2 π‐electron substituents (C₄H₃X; X=CH⁺, SiH⁺, BH, AlH, CH₂, SiH₂, O, S, NH, and CH^?) was performed to assess the connection between the degree of substituent (anti)aromaticity and the profile of the lowest triplet‐state (T₁) potential‐energy surface (PES) for twisting about olefinic C?C bonds. It exploited both Hückel’s rule on aromaticity in the closed‐shell singlet ground state (S₀) and Baird’s rule on aromaticity in the lowest ππ* excited triplet state. The compounds CH₂?CH(C₄H₃X) were categorized as set A and set B olefins depending on which carbon atom (C2 or C3) of the C₄H₃X ring is bonded to the olefin. The degree of substituent (anti)aromaticity goes from strongly S₀‐antiaromatic/T₁‐aromatic (C₅H₄⁺) to strongly S₀‐aromatic/T₁‐ antiaromatic (C₅H₄^?). Our hypothesis is that the shapes of the T₁ PESs, as given by the energy differences between planar and perpendicularly twisted olefin structures in T₁ [ΔE(T₁)], smoothly follow the changes in substituent (anti)aromaticity. Indeed, correlations between ΔE(T₁) and the (anti)aromaticity changes of the C₄H₃X groups, as measured by the zz‐tensor component of the nucleus‐independent chemical shift ΔNICS(T₁;1)_zz, are found both for sets A and B separately (linear fits; r²=0.949 and 0.851, respectively) and for the two sets combined (linear fit; r²=0.851). For sets A and B combined, strong correlations are also found between ΔE(T₁) and the degree of S₀ (anti)aromaticity as determined by NICS(S₀,1)_zz (sigmoidal fit; r²=0.963), as well as between the T₁ energies of the planar olefins and NICS(S₀,1)_zz (linear fit; r²=0.939). Thus, careful tuning of substituent (anti)aromaticity allows for design of small olefins with T₁ PESs suitable for adiabatic Z/E photoisomerization.     

Combining the Advantages of Tetrazoles and 1,2,3‐Triazoles: 4,5‐Bis(tetrazol‐5‐yl)‐1,2,3‐triazole, 4,5‐Bis(1‐hydroxytetrazol‐5‐yl)‐1,2,3‐triazole,and their Energetic Derivatives

In the development of new energetic materials, the main challenge is the combination of high energy content with chemical and mechanical stability, two properties that are often contradictory. In this study, the syntheses and comprehensive characterizations of 4,5‐bis(tetrazole‐5‐yl)‐1,2,3‐triazole and the novel 4,5‐bis(1‐hydroxytetrazole‐5‐yl)‐1,2,3‐triazole, as well as their energetic properties, are presented, combining the advantages of the more energetic tetrazole and the more stable 1,2,3‐triazole rings. Nitrogen‐rich salts of both compounds were synthesized to investigate their detonation performances and combustion behavior calculated by computer codes for potential application in erosion‐reduced gun propellant mixtures due to their high nitrogen content. The structures of several of the compounds were studied by single‐crystal X‐ray diffraction and, especially in the case of 4,5‐bis(tetrazol‐5‐yl)‐1,2,3‐triazole, revealed the site of deprotonation.     

Comparison of the Electrochemical and Luminescence Properties of Two Carbazole‐Based Phosphine Oxide EuIII Complexes: Effect of Different Bipolar Ligand Structures

The photoluminescence (PL), electrochemical, and electroluminescence (EL) properties of Eu^III complexes, [Eu(cppo)₂(tta)₃] ( 1 ) and [Eu(cpo)₂(tta)₃] ( 2 ; TTA=2‐thenoyltrifluoroacetonate) with two carbazole‐based phosphine oxide ligands, 9‐[4‐(diphenylphosphinoyl)phenyl]‐9H‐carbazole (CPPO) and 9‐(diphenylphosphoryl)‐9H‐carbazole (CPO), which have different bipolar structures, donor–π‐spacer–acceptor (D–π–A) or donor–acceptor (D–A) systems respectively, are investigated. The CPPO with D–π–A architecture has improved PL properties, such as higher PL efficiency and more efficient intramolecular energy transfer, than CPO with the D–A architecture. Gaussian simulation proved the bipolar structures and the double‐carrier injection ability of the ligands. The carrier injection abilities of triphenylphosphine oxide, CPO, and CPPO are gradually improved. Notably, the Gaussian and electrochemical investigations indicate that before and after coordination, the carrier injection ability of the ligands show remarkable changes because of the particularity of the D‐π–A and D–A systems. The electrochemical studies demonstrate that coordination induces the electron cloud to migrate from electron‐rich carbazole to electron‐poor diphenylphosphine oxide, and consequently increases the electron‐cloud density on diphenylphosphine oxide, which weakens its ability for electron affinity and induces the elevation of LUMO energy levels of the complexes. Significantly, the π‐spacer in the D–π–A system exhibits a distinct buffer effect on the variation of the electron‐cloud density distribution of the ligand, which is absent in the D–A system. It is demonstrated that the adaptability of the D–π–A systems, especially for coordination, is stronger than that of D–A systems, which facilitates the modification of the complexes by designing multifunctional ligands purposefully. 1 seems favorable as the most efficient electroluminescent Eu^III complex with greater brightness, higher efficiencies, and more stable EL spectra than 2 . These investigations demonstrate that the phosphine oxide ligands with D–π–A architecture are more appropriate than those with D–A architecture to achieve multifunctional electroluminescent Eu^III complexes.     

ChemInform Abstract: First‐Principles Prediction on the High‐Pressure Structures of Transition Metal Diborides (TMB2, TM: Sc,Ti, Y,Zr).

Two novel high‐pressure structures are predicted for the title compounds: a monoclinic structure (space group C2/m, Z = 4) for ScB₂ and YB₂ stable above 208 and 163 GPa, resp., and a tetragonal α‐ThSi₂ type structure (I4₁/amd, Z = 4) for TiB₂ which is stable above 215 GPa.     

New π‐Conjugated Polymers Containing 1,3,5‐Triazine Units in the Main Chain: Synthesis and Optical and Electrochemical Properties of the Polymers

Summary: Three new soluble π‐conjugated polymers containing 1,3,5‐triazine units in the main chain, Pa–Pc, were synthesized. The polymers showed optical properties in solution that were mainly dependant on the properties of the substituting R groups, on the triazine ring. Hence, Pa and Pb (R = H and  OCH₃, respectively) showed blue photoluminescent (PL) emission with high quantum yields (QY) even in polar solvents, whereas Pc (R = N,N‐dimethylamino) gave green‐blue PL emission with very low QY. The PL spectra of the polymers in solution were concentration and polarity dependent, which suggested the formation of an exciplex.

The three new soluble π‐conjugated polymers containing 1,3,5‐triazine units in the main chain synthesized here.