Fused‐ring nitrogen and sulfur heterocycles by a tandem SN2‐michael addition reaction

A tandem S_N2‐Michael addition reaction has been developed for the synthesis of cis‐ and trans‐fused nitrogen and sulfur heterocycles from the cis and trans isomers of ethyl (±)‐(2E)‐3‐[2‐(iodomethyl)cyclo‐hexyl]‐2‐propenoate. Octahydro‐1H‐isoindole‐1‐acetic acid and octahydrobenzo[c]thiophene‐1‐acetic acid derivatives have been prepared and their stereochemistries elucidated using NMR and X‐ray crystallo‐graphic methods. Cyclization substrates for both the cis‐ and the trans‐fused rings are readily available in four steps from known compounds. Yields for the cyclization range from 80‐85% and stereochemical selec‐tivities with respect to the side chain vary from 12.5‐16:1 for the cis‐fused structures to 6‐7.5:1 for the trans‐fused structures. Steric interactions in the transition states for ring closure are proposed to rationalize the observed preferences.     

1,3‐Thiazolidine‐dicarboxylates from Thioketones and Thermally Generated Azomethine Ylides

The reaction of 9H‐fluorene‐9‐thione ( 1 ) with the cis‐ and trans‐isomers of dimethyl 1‐(4‐methoxyphenyl)aziridine‐2,3‐dicarboxylate (cis‐ and trans‐ 2 , resp.) in xylene at 110° yielded exclusively the spirocyclic cycloadduct with trans‐ and cis‐configurations, respectively (trans‐ and cis‐ 3 , resp.; Scheme 1). Analogously, less‐reactive thioketones, e.g., thiobenzophenone ( 5 ), and cis‐ 2 reacted stereoselectively to give the corresponding trans‐1,3‐thiazolidine‐2,4‐dicarboxylate (e.g., trans‐ 8 ; Scheme 2). On the other hand, the reaction of 5 and trans‐ 2 proceeded in a nonstereoselective course to provide a mixture of trans‐ and cis‐substituted cycloadducts. This result can be explained by an isomerization of the intermediate azomethine ylide. Dimethyl 1,3‐thiazolidine‐2,2‐dicarboxylates 14 and 15 were formed in the thermal reaction of dimethyl aziridine‐2,2‐dicarboxylate 11 with aromatic thioketones (Scheme 3). On treatment of 14 and 15 with Raney‐Ni in refluxing EtOH, a desulfurization and ring‐contraction led to the formation of azetidine‐2,2‐dicarboxylates 17 and 18 , respectively (Scheme 4).     

Highly Diastereo‐ and Enantioselective Aziridination of α,β‐Unsaturated Amides with Diaziridine and Mechanistic Consideration on Its Stereochemistry

During studies of aziridination of α,β‐unsaturated amides with diaziridine, we found that we could prepare both the cis‐ and trans‐aziridinecarboxamides by choosing an appropriately substituted diaziridine. While 3‐monosubstituted diaziridine 2 was suitable for the trans‐selective aziridination, employment of 3,3‐dialkyldiaziridine 1 resulted in the formation of cis‐aziridine carboxamides, irrespective of the geometry of the substrate (Scheme 1 and Tables 1 and 2). To elucidate the unique nonstereospecificity and to expand these aziridinations to asymmetric ones, several optically active diaziridines were newly prepared. Aziridination with an optically active 3‐monosubstituted diaziridine, 3‐cyclohexyl‐1‐[(1R)‐1‐phenylethyl]diaziridine 16 , proceeded smoothly with high trans‐selectivity as well as excellent enantioselectivity (up to 98% ee; see Table 3). On the other hand, highly enantioselective cis‐aziridination was achieved (>99% ee) with optically active 3,3‐dimethyl‐1‐[(1R)‐1‐phenylethyl]diaziridine 15 , though the yield was low (4%). This aziridination was considered to proceed stepwise by way of the enolate intermediate (Scheme 2). Careful inspection of the stereochemistry and its solvent‐dependence suggested that the diastereoselection of the reaction was kinetically controlled: the 1,4‐addition of N‐lithiated diaziridine was a crucial step for determination of the stereochemical course of the aziridination (Figs. 2–4).     

Thermal [2+3]‐Cycloadditions of trans‐1‐Methyl‐2,3‐diphenylaziridine with CS and CC Dipolarophiles: An Unexpected Course with Dimethyl Dicyanofumarate

The thermal reaction of trans‐1‐methyl‐2,3‐diphenylaziridine (trans‐ 1a ) with aromatic and cycloaliphatic thioketones 2 in boiling toluene yielded the corresponding cis‐2,4‐diphenyl‐1,3‐thiazolidines cis‐ 4 via conrotatory ring opening of trans‐ 1a and a concerted [2+3]‐cycloaddition of the intermediate (E,E)‐configured azomethine ylide 3a (Scheme 1). The analogous reaction of cis‐ 1a with dimethyl acetylenedicarboxylate ( 5 ) gave dimethyl trans‐2,5‐dihydro‐1‐methyl‐2,5‐diphenylpyrrole‐3,4‐dicarboxylate (trans‐ 6 ) in accord with orbital‐symmetry‐controlled reactions (Scheme 2). On the other hand, the reactions of cis‐ 1a and trans‐ 1a with dimethyl dicyanofumarate ( 7a ), as well as that of cis‐ 1a and dimethyl dicyanomaleate ( 7b ), led to mixtures of the same two stereoisomeric dimethyl 3,4‐dicyano‐1‐methyl‐2,5‐diphenylpyrrolidine‐3,4‐dicarboxylates 8a and 8b (Scheme 3). This result has to be explained via a stepwise reaction mechanism, in which the intermediate zwitterions 11a and 11b equilibrate (Scheme 6). In contrast, cis‐1,2,3‐triphenylaziridine (cis‐ 1b ) and 7a gave only one stereoisomeric pyrrolidine‐3,4‐dicarboxylate 10 , with the configuration expected on the basis of orbital‐symmetry control, i.e., via concerted reaction steps (Scheme 10). The configuration of 8a and 10 , as well as that of a derivative of 8b , were established by X‐ray crystallography.     

Diastereoselective Alkylation of a Proline‐Derived Bicyclic Lactim Ether

N‐Boc‐protected L ‐proline ( 6 ) was converted into the bicyclic lactim ether (8aS)‐6,7,8,8a‐tetrahydro‐1‐methoxypyrrolo[1,2‐a]pyrazin‐4(3H)‐one ( 5 ) in four steps (Scheme 1). Deprotonation with LDA or LHMDS and subsequent alkylation resulted in the diastereoisomeric products cis‐ and trans‐ 9 . The diastereoselectivity was mainly dependent on the electrophile. Whereas small alkyl halides gave preferably cis‐ 9 , sterically more‐demanding alkyl halides resulted in cis/trans mixtures. Electrophiles bearing a π‐system favored the trans‐products 9 . Some isolated cis‐ and trans‐lactim ethers 9 were converted to the corresponding diketopiperazines cis‐ and trans‐ 10 by acid hydrolysis. The structures and configurations of several compounds were confirmed by NMR and NOE experiments, as well as by X‐ray crystallography (Figs. 1–4).     

Separation,interconversion, and insecticidal activity of the cis‐ and trans‐isomers of novel hydrazone derivatives

A series of cis‐ and trans‐isomers of hydrazone derivatives were separated and analyzed through HPLC with diode‐array detection and HPLC‐MS/MS using ESI and ion trap MS. Two single crystals (A‐5‐1 and C‐2‐1) of the trans‐isomers were obtained and determined using X‐ray crystallography data, and the cis‐ to trans‐isomerization under different conditions was discussed. Both of the cis‐ and trans‐isomers of A‐4 and A‐5 exhibited good insecticidal activities against Plutella xylostella.     

Coordination‐Driven Macrocyclization for Locking of Photo‐ and Thermal cis→trans Isomerization of Azobenzene

Both trans and cis isomers of azobenzene‐linked bis‐terpyridine ligand L1 were incorporated in rigid macrocycles linked by Fe^II(tpy)₂ (tpy: terpyridine) units. The complex of the longer trans‐ L1 is dinuclear [(trans‐ L1 )₂ ? Fe^II₂], whereas the complex of the shorter cis‐ L1 is mononuclear [cis‐ L1? Fe^II]. The complex cis‐ L1? Fe^II was not only thermally stable but also photochemically inactive. These results indicate a perfectly locked state of cis‐azobenzene. The stable macrocyclic structure of cis‐ L1? Fe^II causes locking of the isomerization. To the best of our knowledge, this is first example of dual locking of photo‐ and thermal isomerization of cis‐azobenzene.     

Influence of Central Metalloligand Geometry on Electronic Communication between Metals: Syntheses,Crystal Structures,MMCT Properties of Isomeric Cyanido‐Bridged Fe2Ru Complexes,and TDDFT Calculations

To investigate how the central metalloligand geometry influences distant or vicinal metal‐to‐metal charge‐transfer (MMCT) properties of polynuclear complexes, cis‐ and trans‐isomeric heterotrimetallic complexes, and their one‐ and two‐electron oxidation products, cis/trans‐ [Cp(dppe)Fe^IINCRu^II(phen)₂CN‐Fe^II(dppe)Cp][PF₆]₂ (cis/trans‐ 1 [PF₆]₂), cis/trans‐[Cp(dppe)Fe^IINCRu^II(phen)₂CNFe^III‐(dppe)Cp][PF₆]₃ (cis/trans‐ 1 [PF₆]₃) and cis/trans‐[Cp(dppe)Fe^IIINCRu^II(phen)₂CN‐Fe^III(dppe)Cp][PF₆]₄ (cis/trans‐ 1 [PF₆]₄) have been synthesized and characterized. Electrochemical measurements show the presence of electronic interactions between the two external Fe^II atoms of the cis‐ and trans‐isomeric complexes cis/trans‐ 1 [PF₆]₂. The electronic properties of all these complexes were studied and compared by spectroscopic techniques and TDDFT//DFT calculations. As expected, both mixed valence complexes cis/trans‐ 1 [PF₆]₃ exhibited different strong absorption signals in the NIR region, which should mainly be attributed to a transition from an MO that is delocalized over the Ru^II‐CN‐Fe^II subunit to a Fe^III d orbital with some contributions from the co‐ligands. Moreover, the NIR transition energy in trans‐ 1 [PF₆]₃ is lower than that in cis‐ 1 [PF₆]₃, which is related to the symmetry of their molecular orbitals on the basis of the molecular orbital analysis. Also, the electronic spectra of the two‐electron oxidized complexes show that trans‐ 1 [PF₆]₄ possesses lower vicinal Ru^II→Fe^III MMCT transition energy than cis‐ 1 [PF₆]₄. Moreover, the assignment of MMCT transition of the oxidized products and the differences of the electronic properties between the cis and trans complexes can be well rationalized using TDDFT//DFT calculations.     

Asymmetric Synthesis of Bicyclic Diol Derivatives through Metal and Enzyme Catalysis: Application to the Formal Synthesis of Sertraline

Enzyme‐ and ruthenium‐catalyzed dynamic kinetic asymmetric transformation (DYKAT) of bicyclic diols to their diacetates was highly enantio‐ and diastereoselective to give the corresponding diacetates in high yield with high enantioselectivity (99.9 % ee). The enantiomerically pure diols are accessible by simple hydrolysis (NaOH, MeOH), but an alternative enzyme‐catalyzed ester cleavage was also used to give the trans‐diol (R,R)‐ 1 b in extremely high diastereomeric purity (trans/cis=99.9:0.1, >99.9 % ee). It was demonstrated that the diols can be selectively oxidized to the ketoalcohols in a ruthenium‐catalyzed Oppenauer‐type reaction. A formal enantioselective synthesis of sertraline from a simple racemic cis/trans diol 1 b was demonstrated.     

Photocontrol of the Catalytic Activity of a β‐Cyclodextrin Bearing Azobenzene and Histidine Moieties as a Pendant Group

An azobenzene group was linked to β‐cyclodextrin via a histidine spacer ( 1 ) to produce a photoresponsive catalyst. The ester hydrolysis of p‐nitrophenyl acetate, Boc‐L ‐alanine‐p‐nitrophenyl ester and Boc‐D ‐alanine‐p‐nitrophenyl ester was examined in the presence of trans‐ 1 or cis‐ 1 . In the case of cis‐ 1 , the cyclodextrin cavity was used as the substrate binding site during imidazole‐catalyzed ester hydrolysis. This was not possible in the case of trans‐ 1 due to the inclusion of the trans‐azobenzene moiety in the cyclodextrin cavity. Consequently, the catalytic mechanism switches in an on‐off fashion on UV irradiation, associated with the conversion of the azobenzene moiety of 1 from trans to cis.     

Unexpected Formation of Dimethylthioketene Cycloadducts in the Reaction of 1,3‐Diphenylaziridine‐2,2‐dicarboxylate with Cyclobutanethione Derivatives

The reaction of 2,2,4,4‐tetramethyl‐3‐thioxocyclobutanone ( 1 ) with cis‐1‐alkyl‐2,3‐diphenylaziridines 5 in boiling toluene yielded the expected trans‐configured spirocyclic 1,3‐thiazolidines 6 (Scheme 1). Analogously, dimethyl trans‐1‐(4‐methoxyphenyl)aziridine‐2,3‐dicarboxylate (trans‐ 7 ) reacted with 1 and the corresponding dithione 2 , respectively, to give spirocyclic 1,3‐thiazolidine‐2,4‐dicarboxylates 8 (Scheme 2). However, mixtures of cis‐ and trans‐derivatives were obtained in these cases. Unexpectedly, the reaction of 1 with dimethyl 1,3‐diphenylaziridine‐2,2‐dicarboxylate ( 11 ) led to a mixture of the cycloadduct 13 and 5‐(isopropylidene)‐4‐phenyl‐1,3‐thiazolidine‐2,2‐dicarboxylate ( 14 ), a formal cycloadduct of azomethine ylide 12 with dimethylthioketene (Scheme 3). The regioisomeric adduct 16 was obtained from the reaction between 2 and 11 . The structures of 6b , cis‐ 8a , cis‐ 8b, 10 , and 16 have been established by X‐ray crystallography.     

Dinuclear Tin(II) Complex of a Bulky cis‐Oxamide: Synthesis,Characterization, Crystal Structure,and DFT Studies

The reaction of the di‐lithiated oxamide of 1 with two equivalents of SnCl₂ provided the tin trans‐oxamide 3 . In solution, spectroscopic analysis suggests exclusively the formation of a trans‐oxamide (trans‐ 3 ). However, the solid state shows an atypical cis‐oxamide (cis‐ 3 ), where the oxamide fragment acts as an anti‐Janus head ligand. An ¹¹⁹Sn‐NMR variable temperature experiment ([D₈]THF) of the trans‐oxamide (trans‐ 3 ) was performed however, at lower temperature no additional signal was observed, which confirmed the absence of a dynamic equilibrium. Dispersion‐corrected density functional calculations revealed that the cis conformation of this tin(II) oxamide complex is more stable than the trans isomer by 1.4 kcal · mol^–1.     

Synthesis and Thermal Properties of Regio‐ and Stereoregular Poly(silylene‐1,4‐phenylenevinylene)s

Polymerization of p‐(dimethylsilyl)phenylacetylene in toluene at 25 and 80°C using RhI(PPh₃)₃ as the catalyst afforded highly regio‐ and stereoregular poly(dimethylsilylene‐1,4‐phenylenevinylene)s (cis‐ 3 a and trans‐ 3 a ) containing 98% cis‐ and 99% trans‐vinylene moieties, respectively. Similarly, poly(butylmethylsilylene‐1,4‐phenylenevinylene)s ( 3 b with 91% cis‐ and 95% trans‐structures) and poly(diisopropylsilylene‐1,4‐phenylenevinylene) with 95% trans‐structure were synthesized. All polymers were soluble in common organic solvents. The trans‐type polymers showed red shifts and hyperchromic effects in the UV‐visible spectrum. The onset temperature of weight loss (T₀) of cis‐ 3 a was much higher than that of trans‐ 3 a .     

An LC‐MS/MS method for simultaneous determination of cefprozil diastereomers in human plasma and its application for the bioequivalence study of two cefprozil tablets in healthy Chinese volunteers

A rapid and sensitive liquid chromatography–tandem mass spectrometric method was developed for the first time and validated for the determination of cefprozil diastereomers in human plasma. The plasma samples were prepared by protein precipitation using acetonitrile. Detection was performed using an electronic spray ion source in the negative ion mode, operating in the multiple reaction monitoring of the transitions m/z 388.0 to m/z 205.0 for cefprozil diastereomers and m/z 346.1 to m/z 268.1 for cephalexin (the internal standard). The calibration curves of cis‐cefprozil and trans‐cefprozil were linear in the ranges 0.125–16.0 µg/mL and 0.0403–1.72 µg/mL, respectively. The lower limits of quantification of cis‐ and trans‐cefprozil were 0.125 and 0.0403 µg/mL in human plasma, respectively. The intra‐ and inter‐day precisions of cis‐ and trans‐cefprozil were all <9.7%, and the accuracy ranged from 99.2 to 104.7% and from 100.6 to 102.2%, respectively. The validated method was successfully applied to a bioequivalence study of two cefprozil formulations in 24 healthy Chinese volunteers. The two cefprozil tablets were bioequivalent by measurement of cis‐, trans‐ and total cefprozil. We suggest that the bioequivalence of cefprozil formulations can be evaluated only using cis‐cefprozil as the analyte in future studies. Copyright © 2015 John Wiley & Sons, Ltd.     

Structure‐Dependent cis/trans Isomerization of Tetraphenylethene Derivatives: Consequences for Aggregation‐Induced Emission

The isomerization and optical properties of the cis and trans isomers of tetraphenylethene (TPE) derivatives with aggregation‐induced emission (AIEgens) have been sparsely explored. We have now observed the tautomerization‐induced isomerization of a hydroxy‐substituted derivative, TPETH‐OH, under acidic but not under basic conditions. Replacing the proton of the hydroxy group in TPETH‐OH with an alkyl group leads to the formation of TPETH‐MAL, for which the pure cis and trans isomers were obtained and characterized by HPLC analysis and NMR spectroscopy. Importantly, cis‐TPETH‐MAL emits yellow fluorescence in DMSO at ?20 °C whereas trans‐TPETH‐MAL shows red fluorescence under the same conditions. Moreover, the geometry of cis‐ and trans‐TPETH‐MAL remains unchanged when they undergo thiol–ene reactions to form cis‐ and trans‐TPETH‐cRGD, respectively. Collectively, our findings improve our fundamental understanding of the cis/trans isomerization and photophysical properties of TPE derivatives, which will guide further AIEgen design for various applications.     

Efficient Separation of cis‐ and trans‐1,2‐Dichloroethene Isomers by Adaptive Biphen[3]arene Crystals

Reported here is the highly efficient separation of industrially important cis‐ and trans‐1,2‐dichloroethene (cis‐DCE and trans‐DCE) isomers by activated crystalline 2,2′,4,4′‐tetramethoxyl biphen[3]arene (MeBP3) materials, MeBP3α. MeBP3 can be synthesized in excellent yield (99 %), and a cyclic pentamer is also obtained when using 1,2‐dichloroethane as the solvent. The structure of MeBP3 in the CH₃CN@MeBP3 crystal displays a triangle‐shape topology, forming 1D channels through window‐to‐window packing. Desolvated crystalline MeBP3 materials, MeBP3α, preferentially adsorb cis‐DCE vapors over its trans isomer. MeBP3α is able to separate cis‐DCE from a 50:50 (v/v) cis/trans‐isomer mixture, yielding cis‐DCE with a purity of 96.4 % in a single adsorption cycle. Single‐crystal structures and powder X‐ray diffraction patterns indicate that the uptake of cis‐DCE triggers a solid‐state structural transformation of MeBP3, suggesting the adaptivity of MeBP3α materials during the sorption process. Moreover, the separation can be performed over multiple cycles without loss of separation selectivity and capacity.     

Interactions of Molecules with cis and trans Double Bonds: A Theoretical Study of cis‐ and trans‐2‐Butene

Noncovalent interactions of cis‐ and trans‐2‐butene, as the smallest model systems of molecules with cis and trans double bonds, were studied to find potential differences in interactions of these molecules. The study was performed using quantum chemical methods including very accurate CCSD(T)/CBS method. We studied parallel and displaced parallel interactions in 2‐butene dimers, in butane dimers, and between 2‐butene and saturated butane. The results show the trend that interactions of 2‐butene with butane are the strongest, followed by interactions in butane dimers, whereas the interaction in 2‐butene dimers are the weakest. The strongest calculated interaction energy is between trans‐2‐butene and butane, with a CCSD(T)/CBS energy of ?2.80 kcal mol^?1. Interactions in cis‐2‐butene dimers are stronger than interactions in trans‐2‐butene dimers. Interestingly, some of the interactions involving 2‐butene are as strong as interactions in a benzene dimer. These insights into interactions of cis‐ and trans‐2‐butene can improve understanding of the properties and processes that involve molecules with cis and trans double bonds, such as fatty acids and polymers.     

Molecular Design for Reversing the Photoswitching Mode of Turning ON and OFF DNA Hybridization

A new photoswitch for DNA hybridization involving para‐substituted azobenzenes (such as isopropyl‐ or tert‐butyl‐substituted derivatives) with L ‐threoninol as a linker was synthesized. Irradiation of the modified DNA with visible light led to dissociation of the duplex owing to the destabilization effect of the bulky substituent on the trans‐azobenzene. In contrast, trans‐to‐cis isomerization (UV light irradiation) facilitated duplex formation. The direction of this photoswitching mode was entirely reversed relative to the previous system with an unmodified azobenzene on D ‐threoninol whose trans form turned on the hybridization, and cis form turned it off. Such reversed and reversible photoswitching of DNA hybridization was directly demonstrated by using fluorophore‐ and quencher‐attached oligonucleotides. Furthermore, it was revealed that the cis‐to‐trans thermal isomerization was greatly suppressed in the presence of the complementary strand owing to the formation of the more‐stable duplex in the cis form.     

Novel Synthesis of 2‐Aryl‐4,5,6,7‐tetrahydro‐1,2‐benzisothiazol‐3(2H)‐ones and Their S‐Oxides

2‐Aryl‐4,5,6,7‐tetrahydro‐1,2‐benzisothiazol‐3(2H)‐ones 1a – e were synthesized by cyclocondensation of 2‐(thiocyanato)cyclohexene‐1‐carboxanilides 9 as a convenient new method. Their S‐oxides 10 were prepared by two routes, either by oxidation of 1 or dehydration of rac‐cis‐3‐hydroperoxysultims 11 . Furthermore, compounds 1 have been identified by HPLC? API‐MS‐MS as intermediates in the oxidation process of the salts 6 . The hydroperoxides 12b and rac‐trans‐ 11b have been unambiguously detected by HPLC? MS investigations and in the reaction of rac‐cis‐ 13b with H₂O₂ to the hydroperoxides rac‐trans‐ 11b and rac‐cis‐ 11b .     

trans–cis Photoisomerization of Azobenzene‐Conjugated Dithiolato‐Bipyridine Platinum(II) Complexes: Extension of Photoresponse to Longer Wavelengths and Photocontrollable Tristability

Azobenzene derivatives modified with dithiolato‐bipyridine platinum(II) complexes were synthesized, revealing their highly extended photoresponses to the long wavelength region as well as unique photocontrollable tristability. The absorptions of trans‐ 1 and trans‐ 2 with one azobenzene group on the dithiolene and bipyridine ligands, respectively, cover the range from 300 to 700 nm. These absorptions are ascribed, by means of time‐dependent (TD)DFT calculations, to transitions from dithiolene(π) to bipyridine(π*), namely, interligand charge transfer (CT), π–π*, and n–π* transitions of the azobenzene unit, and π–π* transitions of the bipyridine ligand. In addition, only trans‐ 1 shows distinctive electronic bands, assignable to transitions from the dithiolene(π) to azobenzene(π*), defined as intraligand CT. Complex 1 shows photoisomerization behavior opposite to that of azobenzene: trans‐to‐cis and cis‐to‐trans conversions proceed with 405 and 312 nm irradiation, which correspond to excitation with the intraligand CT, and π–π* bands of the azobenzene and bipyridine units, respectively. In contrast, complex 2 shows photoisomerization similar to that of azobenzene: trans‐to‐cis and cis‐to‐trans transformations occur with 365 and 405 nm irradiation, respectively. Irradiation at 578 nm, corresponding to excitation of the interligand CT transitions, results in cis‐to‐trans conversion of both 1 and 2 , which is the longest wavelength ever reported to effect the photoisomerization of the azobenzene group. The absorption and photochromism of 4 , which has azobenzene groups on both the dithiolato and bipyridine ligands, have characteristics quite similar to those of 1 and 2 , which furnishes 4 with photocontrollable tristability in a single molecule using light at 365, 405, and 578 nm. We also clarified that 1 and 2 have high photoisomerization efficiencies, and good thermal stability of the cis forms. Complexes 3 and 5 have almost the identical photoresponse to those of their positional isomers, complexes 2 and 4 .