Selective Capture of Carbon Dioxide under Humid Conditions by Hydrophobic Chabazite‐Type Zeolitic Imidazolate Frameworks

Hydrophobic zeolitic imidazolate frameworks (ZIFs) with the chabazite ( CHA ) topology are synthesized by incorporating two distinct imidazolate links. Zn(2‐mIm)_0.86(bbIm)_1.14 (ZIF‐300), Zn(2‐mIm)_0.94(cbIm)_1.06 (ZIF‐301), and Zn(2‐mIm)_0.67(mbIm)_1.33 (ZIF‐302), where 2‐mIm=2‐methylimidazolate, bbIm=5(6)‐bromobenzimidazolate, cbIm=5(6)‐chlorobenzimidazolate, and mbIm=5(6)‐methylbenzimidazolate, were prepared by reacting zinc nitrate tetrahydrate and 2‐mIm with the respective bIm link in a mixture of N,N‐dimethylformamide (DMF) and water. Their structures were determined by single‐crystal X‐ray diffraction and their permanent porosity shown. All of these structures are hydrophobic as confirmed by water adsorption isotherms. All three ZIFs are equally effective at the dynamic separation of CO₂ from N₂ under both dry and humid conditions without any loss of performance over three cycles and can be regenerated simply by using a N₂ flow at ambient temperature.     

Ring‐to‐Cage Structural Conversion via Template Effect in a Gold(I) Metallosupramolecular System

A unique example of a ring‐to‐cage structural conversion in a multinuclear gold(I) coordination system with d ‐penicillamine (d ‐H₂pen) is reported. The reaction of [Au₂Cl₂(dppe)] (dppe=1,2‐bis(diphenylphosphino)ethane) with d ‐H₂pen in a 1:1 ratio gave [Au₄(dppe)₂(d ‐pen)₂] ([ 1 ]), in which two [Au₂(dppe)]²⁺ units are linked by two d ‐pen S atoms in a cyclic form so as to have two bidentate‐N,O coordination arms. The subsequent reaction of [ 1 ] with Cu(OTf)₂ afforded [Au₄Cu(dppe)₂(d ‐pen)₂]²⁺ ([ 2 ]²⁺), in which a Cu^II ion is chelated by the two coordination arms in [ 1 ] to form an Au^I₄Cu^II bicyclic metallocage. A similar reaction using Cu(NO₃)₂ was accompanied by the ring expansion of [ 1 ] to [Au₈(dppe)₄(d ‐pen)₄], leading to the production of [Au₈Cu₂(dppe)₄(d ‐pen)₄]⁴⁺ ([ 3 ]⁴⁺). In [ 3 ]⁴⁺, two Cu^II ions are each chelated by the two coordination arms to form an Au^I₈Cu^II₂ tricyclic metallocage, accommodating a nitrate ion. The use of Ni(NO₃)₂ or Ni(OAc)₂ instead of Cu(NO₃)₂ commonly gave a tricyclic metallocage of [Au₈Ni₂(dppe)₄(d ‐pen)₄]⁴⁺ ([ 4 ]⁴⁺), but a water molecule was accommodated inside the Au^I₈Ni^II₂ metallocage.     

Metal‐Substituted Zeolitic Imidazolate Framework ZIF‐108: Gas‐Sorption and Membrane‐Separation Properties

A series of dual‐metal zeolitic imidazolate framework (ZIF) crystals with SOD and RHO topologies was synthesised by metal substitution from ZIF‐108 (Zn(2‐nitroimidazolate)₂, SOD topology) as the parent material. This was based on the concept that metal substitution of ZIF‐108 requires a much lower activation energy than homogenous nucleation owing to the metastability of ZIF‐108. In‐depth investigations of the formation processes of the daughter ZIFs indicated that the transformation of ZIF‐108 is a dissolution/heterogeneous nucleation process. Typical isostructural Co²⁺ substitution mainly occurs at the outer surface of ZIF‐108 and results in a core–shell structure. On the contrary, the Cu²⁺‐substituted ZIF has a RHO topology with a homogeneous distribution of Cu²⁺ ions in the structure. Substitution with Ni²⁺ resulted in a remarkable enhancement in adsorption selectivity toward CO₂ over N₂ by a factor of up to 227. With Co²⁺‐substituted nanoparticles as inorganic filler, a mixed matrix membrane based on polysulfone displayed greatly improved performance in the separation of H₂/CH₄, CO₂/N₂ and CO₂/CH₄.     

ZIF‐8 Membrane Separation Performance Tuning by Vapor Phase Ligand Treatment

Vapor phase ligand treatment (VPLT) of 2‐aminobenzimidazole (2abIm) for 2‐methylimidazole (2mIm) in ZIF‐8 membranes prepared by two different methods (LIPS: ligand induced permselectivation and RTD: rapid thermal deposition) results in a notable shift of the molecular level cut‐off to smaller molecules establishing selectivity improvements from ca. 1.8 to 5 for O₂/N₂; 2.2 to 32 for CO₂/CH₄; 2.4 to 24 for CO₂/N₂; 4.8 to 140 for H₂/CH₄ and 5.2 to 126 for H₂/N₂. Stable (based on a one‐week test) oxygen‐selective air separation performance at ambient temperature, 7 bar(a) feed, and 1 bar(a) sweep‐free permeate with a mixture separation factor of 4.5 and oxygen flux of 2.6×10^?3 mol m^?2 s^?1 is established. LIPS and RTD membranes exhibit fast and gradual evolution upon a 2abIm‐VPLT, respectively, reflecting differences in their thickness and microstructure. Functional reversibility is demonstrated by showing that the original permeation properties of the VPLT‐LIPS membranes can be recovered upon 2mIm‐VPLT.     

The Zeolitic Imidazolate Framework ZIF‐4 under Low Hydrostatic Pressures

The zeolitic imidazolate framework ZIF‐4 has recently been shown to exhibit large structural flexibility as a response to hydrostatic pressures, going from an open pore phase ( ZIF ‐ 4 ( Zn )‐ op ) to a closed pore phase ( ZIF ‐ 4 ( Zn )‐ cp ). The use of diamond anvil cell (DAC) setups has so far restricted thorough experimental insight into the evolution of lattice parameters at pressures below p < 0.1 GPa. Here we revisit the high‐pressure properties of ZIF‐4(Zn) by applying a new high‐pressure powder X‐ray diffraction setup that allows for tracking the evolution of lattice parameters in pressure increments as small as Δp = 0.005 GPa in the pressure range p = ambient – 0.4 GPa; a pressure resolution that cannot be achieved by using traditional DACs. We find ZIF‐4(Zn) has a bulk modulus of K( ZIF ‐ 4 ( Zn )‐ op ) = 2.01 ± 0.05 GPa and K( ZIF ‐ 4 ( Zn )‐ cp ) = 4.39 ± 0.20 GPa, clarifying and confirming some ambiguous results that have been reported previously.     

A three‐dimensional framework of bis­[tris­(ethyl­enediamine)zinc] tetra­iodo­cadmate diiodide assisted by N—H⋯I hydrogen bonds

The title salt, [Zn(C₂N₂H₈)₃]₂[CdI₄]I₂, conventionally abbreviated [Zn(en)₃]₂[CdI₄]I₂, where en is ethyl­enediamine, contains discrete [Zn(en)₃]²⁺ cations and [CdI₄]²⁻ anions with distorted octa­hedral and nearly tetra­hedral geometries, respectively, as well as uncoordinated I⁻ ions. The cation and the free I⁻ anion lie on twofold rotation axes and the [CdI₄]²⁻ anion lies on a axis in the space group I2d. The structure exhibits numerous weak inter‐ionic hydrogen bonds of two types, viz. N—H⋯I⁻(free ion) and N—H⋯I([CdI₄]²⁻), which support the resulting three‐dimensional framework.     

Fabrication of ZIF‐8@SiO2 Core–Shell Microspheres as the Stationary Phase for High‐Performance Liquid Chromatography

The unique features of high porosity, shape selectivity, and multiple active sites make metal–organic frameworks (MOFs) promising as novel stationary phases for high‐performance liquid chromatography (HPLC). However, the wide particle size distribution and irregular shape of conventional MOFs lead to lower column efficiency of such MOF‐packed columns. Herein, the fabrication of monodisperse MOF@SiO₂ core–shell microspheres as the stationary phase for HPLC to overcome the above‐mentioned problems is reported. Zeolitic imidazolate framework 8 (ZIF‐8) was used as an example of MOFs due to its permanent porosity, uniform pore size, and exceptional chemical stability. Unique carboxyl‐modified silica spheres were used as the support to grow the ZIF‐8 shell. The fabricated monodisperse ZIF‐8@SiO₂ packed columns (5 cm long × 4.6 mm i.d.) show high column efficiency (23 000 plates m^?1 for bisphenol A) for the HPLC separation of endocrine‐disrupting chemicals (bisphenol A, β‐estradiol, and p‐(tert‐octyl)phenol) and pesticides (thiamethoxam, hexaflumuron, chlorantraniliprole, and pymetrozine) within 7 min with good relative standard deviations for 11 replicate separations of the analytes (0.01–0.39, 0.65–1.7, 0.70–1.3, and 0.17–0.91 % for retention time, peak area, peak height, and half peak width, respectively). The ZIF‐8@SiO₂ microspheres combine the advantages of the good column packing properties of the uniform monodisperse silica microspheres and the separation ability of the ZIF‐8 crystals.     

Guest‐Adaptable and Water‐Stable Peptide‐Based Porous Materials by Imidazolate Side Chain Control

The peptide‐based porous 3D framework, ZnCar, has been synthesized from Zn²⁺ and the natural dipeptide carnosine (β‐alanyl‐L ‐histidine). Unlike previous extended peptide networks, the imidazole side chain of the histidine residue is deprotonated to afford Zn–imidazolate chains, with bonding similar to the zeolitic imidazolate framework (ZIF) family of porous materials. ZnCar exhibits permanent microporosity with a surface area of 448 m² g^?1, and its pores are 1D channels with 5 Å openings and a characteristic chiral shape. This compound is chemically stable in organic solvents and water. Single‐crystal X‐ray diffraction (XRD) showed that the ZnCar framework adapts to MeOH and H₂O guests because of the torsional flexibility of the main His‐β‐Ala chain, while retaining the rigidity conferred by the Zn–imidazolate chains. The conformation adopted by carnosine is driven by the H bonds formed both to other dipeptides and to the guests, permitting the observed structural transformations.     

Two Robust Porous Metal–Organic Frameworks Sustained by Distinct Catenation: Selective Gas Sorption and Single‐Crystal‐to‐Single‐Crystal Guest Exchange

Assembly of copper(I) halide with a new tripodal ligand, benzene‐1,3,5‐triyl triisonicotinate (BTTP4), afforded two porous metal–organic frameworks, [Cu₂I₂(BTTP4)]?2 CH₃CN ( 1? 2 CH₃CN) and [CuBr(BTTP4)]?(CH₃CN ? CHCl₃ ? H₂O) ( 2? solvents), which have been characterized by IR spectroscopy, thermogravimetry (TG), single‐crystal, and powder X‐ray diffraction (PXRD) methods. Compound 1.CH3CN is a polycatenated 3D framework that consists of 2D (6,3) networks through inclined catenation, whereas 2 is a doubly interpenetrated 3D framework possessing the ThSi₂‐type ( ths ) (10,3)‐b topology. Both frameworks contain 1D channels of effective sizes 9×12 and 10×10 Ų, which amounts to 43 and 40 % space volume accessible for solvent molecules, respectively. The TG and variable‐temperature PXRD studies indicated that the frameworks can be completely evacuated while retaining the permanent porosity, which was further verified by measurement of the desolvated complex [Cu₂I₂(BTTP4)] ( 1′ ). The subsequent guest‐exchange study on the solvent‐free framework revealed that various solvent molecules can be adsorbed through a single‐crystal‐to‐single‐crystal manner, thus giving rise to the guest‐captured structures [Cu₂I₂(BTTP4)]?C₆H₆ ( 1.benzene ), [Cu₂I₂(BTTP4)]?2 C₇H₈ ( 1.2toluene ), and [Cu₂I₂(BTTP4)]?2 C₈H₁₀ ( 1.2ethyl benzene ). The gas‐adsorption investigation disclosed that two kinds of frameworks exhibited comparable CO₂ storage capacity (86–111 mL g^?1 at 1 atm) but nearly none for N₂ and H₂, thereby implying its separation ability of CO₂ over N₂ and H₂. The vapor‐adsorption study revealed the preferential inclusion of aromatic guests over nonaromatic solvents by the empty framework, which is indicative of selectivity toward benzene over cyclohexane.     

Chiral Metal–Organic Framework Hollow Nanospheres for High‐Efficiency Enantiomer Separation

Chiral ZIF‐8 hollow nanospheres with d ‐histidine as part of chiral ligands (denoted as H‐d ‐his‐ZIF‐8) were prepared for separation of (±)‐amine acids. Compared to bulk d ‐his‐ZIF‐8 without a hollow cavity, the prepared H‐d ‐his‐ZIF‐8 showed 15 times higher separation capacity and higher ee values of 90.5 % for alanine, 95.2 % for glutamic acid and 92.6 % for lysine, respectively.     

Cancer‐Cell Imaging Using Copper‐Doped Zeolite Imidazole Framework‐8 Nanocrystals Exhibiting Oxidative Catalytic Activity

Copper‐doped zeolite imidazole framework‐8 (Cu/ZIF‐8) was prepared and its peroxidase‐like oxidative catalytic activity was examined with a demonstration of its applicability for cancer‐cell imaging. Through simple solution chemistry at room temperature, Cu/ZIF‐8 nanocrystals were produced that catalytically oxidized an organic substrate of o‐phenylenediamine in the presence of H₂O₂. In a similar manner to peroxidase, the Cu/ZIF‐8 nanocrystals oxidized the substrate through a ping‐pong mechanism with an activation energy of 59.2 kJ mol⁻¹. The doped Cu atoms functioned as active sites in which the active Cu intermediates were expected to be generated during the catalysis, whereas the undoped ZIF‐8 did not show any oxidative activity. Cu/ZIF‐8 nanocrystals exhibited low cell toxicity and displayed catalytic activity through interaction with H₂O₂ among various reactive oxygen species in a cancer cell. This oxidative activity in vitro allowed cancer‐cell imaging by exploiting the photoluminescence emitted from the oxidized product of o‐phenylenediamine, which was insignificant in the absence of the Cu/ZIF‐8 nanocrystals. The results of this study suggest that the Cu/ZIF‐8 nanocrystal is a promising catalyst for the analysis of the microbiological systems.     

Sponge‐Like Behaviour in Isoreticular Cu(Gly‐His‐X) Peptide‐Based Porous Materials

We report two isoreticular 3D peptide‐based porous frameworks formed by coordination of the tripeptides Gly‐L ‐His‐Gly and Gly‐L ‐His‐L ‐Lys to Cu^II which display sponge‐like behaviour. These porous materials undergo structural collapse upon evacuation that can be reversed by exposure to water vapour, which permits recovery of the original open channel structure. This is further confirmed by sorption studies that reveal that both solids exhibit selective sorption of H₂O while CO₂ adsorption does not result in recovery of the original structures. We also show how the pendant aliphatic amine chains, present in the framework from the introduction of the lysine amino acid in the peptidic backbone, can be post‐synthetically modified to produce urea‐functionalised networks by following methodologies typically used for metal–organic frameworks built from more rigid “classical” linkers.     

Rapid magnetic solid‐phase extraction of Congo Red and Basic Red 2 from aqueous solution by ZIF‐8@CoFe2O4 hybrid composites

Core–shell metal–organic framework materials have attracted considerable attention mainly due to their enhanced or new physicochemical properties compared with their single‐component counterparts. In this work, a core–shell heterostructure of CoFe₂O₄‐Zeolitic Imidazolate Framework‐8 (ZIF‐8@CoFe₂O₄) is successfully fabricated and used as an solid‐phase extraction adsorbent to efficiently extract Congo Red and Basic Red 2 dyes from contaminated aqueous solution. Vibrating sample magnetometry indicates that the saturated magnetization of ZIF‐8@CoFe₂O₄ is 3.3 emu/g, which is large enough for magnetic separation. The obtained hybrid magnetic metal‐organic framework based material ZIF‐8@CoFe₂O₄ can remove the investigated dyes very fast within 1 min of the contact time. The adsorbent ZIF‐8@CoFe₂O₄ also shows a good reusability. After regeneration, the adsorbent can still exhibit high removal efficiency (～97%) toward Congo Red for five cycles of desorption–adsorption. This work reveals the great potential of core–shell ZIF‐8@CoFe₂O₄ sorbents for the fast separation and preconcentration of organic pollutants in aqueous solution before high‐performance liquid chromatography analysis.     

Alkalimetalltetraethinylozincate und ‐cadmate AI2M(C2H)4 (AI = Na — Cs,M = Zn,Cd): Synthese,Kristallstruktur und spektroskopische Eigenschaften

Alkali Metal Tetraethinylozincates and ‐cadmates A^I₂M(C₂H)₄ (A^I = Na — Cs, M = Zn, Cd): Synthesis, Crystal Structures, and Spectroscopic Properties By reaction of A^IC₂H (A^I = Na — Cs) with divalent zinc and cadmium salts in liquid ammonia the alkali metal tetraethinylozincates and ‐cadmates A^I₂M(C₂H)₄ (M = Zn, Cd) were accessible as polycrystalline powders. While Na₂M(C₂H)₄ is amorphous to X‐rays and the crystal structure of Cs₂Zn(C₂H)₄ could not be solved up to now, the remaining compounds are isotypic to the already known crystal structures of the potassium compounds, as was deduced from powder diffraction with X‐rays and synchrotron radiation. They crystallise in the tetragonal space group I4₁a, contain [M(C₂H)₄]^2— tetrahedra and show structural relationships to the scheelit and anatas structure types. Raman spectroscopic investigations confirm the existence of tetrahedral fragments with C‐C triple bonds in the alkali as well as in the amorphous alkaline earth metal compounds A^IIM(C₂H)₄ (A^II = Mg — Ba, M = Zn, Cd).     

The effect of synthesis procedure on the catalytic performance of isostructural ZIF‐8

We demonstrate the synthesis of isostructural zeolitic imidazole framework (ZIF‐8) using four distinct synthetic methods. Subsequently, the variations in physicochemical properties were analyzed through the catalytic reaction of CO₂ cycloaddition of epoxide. It was thus demonstrated that simply by changing the type of synthetic method for the preparation of ZIF‐8, the physicochemical properties were changed significantly which in turn influenced the catalytic activity of ZIF‐8. It was found that the synthetic method affected the crystal growth and consequently influenced the physicochemical properties which are crucial aspects in metal–organic framework applications. There is an almost exponential relationship between the reactivity of various ZIF‐8 samples in CO₂ cycloaddition of epoxide and the surface area, CO₂ adsorption and pore volume.     

Tuning the Gate‐Opening Pressure in a Switching pcu Coordination Network,X‐pcu‐5‐Zn,by Pillar‐Ligand Substitution

Coordination networks that reversibly switch between closed and open phases are of topical interest since their stepped isotherms can offer higher working capacities for gas‐storage applications than the related rigid porous coordination networks. To be of practical utility, the pressures at which switching occurs, the gate‐opening and gate‐closing pressures, must lie between the storage and delivery pressures. Here we study the effect of linker substitution to fine‐tune gate‐opening and gate‐closing pressure. Specifically, three variants of a previously reported pcu ‐topology MOF, X‐pcu‐5‐Zn , have been prepared: X‐pcu‐6‐Zn , 6 =1,2‐bis(4‐pyridyl)ethane (bpe), X‐pcu‐7‐Zn , 7 =1,2‐bis(4‐pyridyl)acetylene (bpa), and X‐pcu‐8‐Zn , 8 =4,4′‐azopyridine (apy). Each exhibited switching isotherms but at different gate‐opening pressures. The N₂, CO₂, C₂H₂, and C₂H₄ adsorption isotherms consistently indicated that the most flexible dipyridyl organic linker, 6 , afforded lower gate‐opening and gate‐closing pressures. This simple design principle enables a rational control of the switching behavior in adsorbent materials.     

Ultra‐Tuning of the Aperture Size in Stiffened ZIF‐8_Cm Frameworks with Mixed‐Linker Strategy for Enhanced CO2/CH4 Separation

ZIF‐8 membrane has the potential for CO₂/CH₄ separation based on size exclusion. But if traditionally prepared by solvothermal methods, it shows only negligible selectivity due to the linker mobility. Here, ≈500 nm‐thin hybrid ZIF‐7_x‐8 membranes with suppressed linker mobility and narrowed window aperture are prepared by a fast current‐driven synthesis (FCDS) within 20 min. The in situ electric field during FCDS allows the formation of stiffened ZIF‐8_Cm as parent skeleton and the mixed‐linker strategy is applied to narrow the aperture size simultaneously. The ZIF‐7₂₂‐8 membrane shows significantly sharpened molecular sieving for CO₂/CH₄ with a separation factor above 25, which soared tenfold compared with other unmodified ZIF‐8 membranes. Additionally, the membrane shows exceptional separation performance for H₂/CH₄ and CO₂/N₂, with separation factors of 71 and 20, respectively. After 180 h temperature swing operation, it still maintains the excellent separation performance.     

Tuning the Gate‐Opening Pressure in a Switching pcu Coordination Network,X‐pcu‐5‐Zn,by Pillar‐Ligand Substitution

Coordination networks that reversibly switch between closed and open phases are of topical interest since their stepped isotherms can offer higher working capacities for gas‐storage applications than the related rigid porous coordination networks. To be of practical utility, the pressures at which switching occurs, the gate‐opening and gate‐closing pressures, must lie between the storage and delivery pressures. Here we study the effect of linker substitution to fine‐tune gate‐opening and gate‐closing pressure. Specifically, three variants of a previously reported pcu ‐topology MOF, X‐pcu‐5‐Zn , have been prepared: X‐pcu‐6‐Zn , 6 =1,2‐bis(4‐pyridyl)ethane (bpe), X‐pcu‐7‐Zn , 7 =1,2‐bis(4‐pyridyl)acetylene (bpa), and X‐pcu‐8‐Zn , 8 =4,4′‐azopyridine (apy). Each exhibited switching isotherms but at different gate‐opening pressures. The N₂, CO₂, C₂H₂, and C₂H₄ adsorption isotherms consistently indicated that the most flexible dipyridyl organic linker, 6 , afforded lower gate‐opening and gate‐closing pressures. This simple design principle enables a rational control of the switching behavior in adsorbent materials.     

Recognition of 1,3‐Butadiene by a Porous Coordination Polymer

The separation of 1,3‐butadiene from C₄ hydrocarbon mixtures is imperative for the production of synthetic rubbers, and there is a need for a more economical separation method, such as a pressure swing adsorption process. With regard to adsorbents that enable C₄ gas separation, [Zn(NO₂ip)(dpe)]_n (SD‐65; NO₂ip=5‐nitroisophthalate, dpe=1,2‐di(4‐pyridyl)ethylene) is a promising porous material because of its structural flexibility and restricted voids, which provide unique guest‐responsive accommodation. The 1,3‐butadiene‐selective sorption profile of SD‐65 was elucidated by adsorption isotherms, in situ PXRD, and SSNMR studies and was further investigated by multigas separation and adsorption–desorption‐cycle experiments for its application to separation technology.     

Turn‐On Fluorescence in Tetra‐NHC Ligands by Rigidification through Metal Complexation: An Alternative to Aggregation‐Induced Emission

Two tetraphenylethylene (TPE) bridged tetraimidazolium salts, [H₄ L ‐Et](PF₆)₄ and [H₄ L ‐Bu](PF₆)₄, were used as precursors for the synthesis of the dinuclear Ag^I and Au^I tetracarbene complexes [Ag₂( L ‐Et)](PF₆)₂, [Ag₂( L ‐Bu)](PF₆)₂, [Au₂( L ‐Et)](PF₆)₂, and [Au₂( L ‐Bu)](PF₆)₂. The tetraimidazolium salts show almost no fluorescence (Φ _F<1 %) in dilute solution while their NHC complexes display fluorescence “turn‐on” (Φ _F up to 47 %). This can be ascribed to rigidification mediated by the restriction of intramolecular rotation within the TPE moiety upon complexation. DFT calculations confirm that the metals are not involved in the lowest excited singlet and triplet states, thus explaining the lack of phosphorescence and fast intersystem crossing as a result of heavy atom effects. The rigidification upon complexation for fluorescence turn‐on constitutes an alternative to the known aggregation‐induced emission (AIE).