Isolation and Total Structure Determination of an All‐Alkynyl‐Protected Gold Nanocluster Au144

Total structure determination of a ligand‐protected gold nanocluster, Au₁₄₄, has been successfully carried out. The composition of title nanocluster is Au₁₄₄(C≡CAr)₆₀ ( 1 ; Ar=2‐FC₆H₄‐). The cluster 1 exhibits a quasi‐spherical Russian doll‐like architecture, comprising a Au₅₄ two‐shelled Mackay icosahedron (Au₁₂@Au₄₂), which is further enclosed by a Au₆₀ anti‐Mackay icosahedral shell. The Au₁₁₄ kernel is enwrapped by thirty linear ArC≡C‐Au‐C≡CAr staple motifs. The absorption spectrum of 1 shows two bands at 560 and 620 nm. This spectrum is distinctly different from that of thiolated Au₁₄₄, which was predicted to have an almost identical metal kernel and very similar ligands arrangement in 1 . These facts indicate the molecule‐like behavior of 1 and significant involvement of ligands in the electronic structure of 1 . The cluster 1 is hitherto the largest coinage metal nanocluster with atomically precise molecular structure in the alkynyl family. The work not only addresses the concern of structural information of Au₁₄₄, which had been long‐pursued, but also provides an interesting example showing ligand effects on the optical properties of ligand protected metal nanoclusters.     

Carbon Monoxide: A Mild and Efficient Reducing Agent towards Atomically Precise Gold Nanoclusters

In recent years, thiolate‐protected gold nanoclusters (or thiolated Au NCs) with a core size below 2 nm have emerged as a new class of multifunctional nanoparticles because of their unique molecular‐like properties and the potential to use these properties in many practical applications. A general synthesis of Au NCs may involve the use of a strong reducing agent (e.g., sodium borohydride (NaBH₄)), which often leads to the formation of mix‐sized Au NCs if no delicate control is applied. To obtain atomically precise Au NCs, additional physical or chemical selection processes (e.g., high‐resolution separation or size‐focusing) are required, which are difficult to be scaled up or are limited to only thermodynamically stable products. By introducing a milder reducing agent – carbon monoxide (CO) – both stable and metastable thiolated Au NCs, including Au_10–12, Au₁₅, Au₁₈, Au₂₅, and Au₂₉, can be synthesized in a one‐pot manner. In addition, CO reduction also enables the synthesis of a highly luminescent Au₂₂(SG)₁₈ NC. Furthermore, the intermediates of Au NC growth can be tracked in the CO‐reduction system due to the mild and readily stoppable nature of CO reduction. Therefore, the use of CO reduction may bring new flexibilities in designing synthetic strategies and understanding the growth mechanism of atomically precise Au NCs, which could contribute to a better design of functional Au NCs, further paving their way towards practical applications in various fields.     

Unprecedented Electron‐Poor Octahedral Ta6 Clusters in a Solid‐State Compound: Synthesis,Characterisations and Theoretical Investigations of Cs2BaTa6Br15O3

The crystal structure of Cs₂BaTa₆Br₁₅O₃ has been elucidated by using synchrotron X‐ray powder diffraction and absorption experiments. It is built from edge‐bridged octahedral [(Ta₆${{\rm Br}{{{\rm i}\hfill \atop 9\hfill}}}$ ${{\rm O}{{{\rm i}\hfill \atop 3\hfill}}}$ )${{\rm Br}{{{\rm a}\hfill \atop 6\hfill}}}$ ]^4? cluster units with a singular poor metallic electron (ME) count equal to thirteen. This leads to a paramagnetic behaviour related to one unpaired electron. The arrangement of the Ta₆ clusters is similar to that of Cs₂LaTa₆Br₁₅O₃ exhibiting 14‐MEs per [(Ta₆${{\rm Br}{{{\rm i}\hfill \atop 9\hfill}}}$ ${{\rm O}{{{\rm i}\hfill \atop 3\hfill}}}$ )${{\rm Br}{{{\rm a}\hfill \atop 6\hfill}}}$ ]^5? motif. The poorer electron‐count cluster presents longer metal–metal distances as foreseen according to the electronic structure of edge‐bridged hexanuclear cluster. Density functional theory (DFT) calculations on molecular models were used to rationalise the structural properties of 13‐ and 14‐ME clusters. Periodic DFT calculations demonstrate that the electronic structure of these solid‐state compounds is related to those of the discrete octahedral units. Oxygen–barium interactions seem to prevent the geometry of the octahedral cluster to strongly distort, allowing stabilisation of this unprecedented electron‐poor Ta₆ cluster in the solid state.     

Structure Determination of Alkynyl‐Protected Gold Nanocluster Au22(tBuC≡C)18 and Its Thermochromic Luminescence

An alkynyl‐protected gold nanocluster, Au₂₂(^tBuC≡C)₁₈ ( 1 ), has been synthesized and its structure has been determined by single‐crystal X‐ray diffraction. The molecular structure consists of a Au₁₃ cuboctahedron kernel and three [Au₃(^tBuC≡C)₄] trimeric staples. The cluster 1 has strong luminescence in the solid state with a 15 % quantum yield, and it displays interesting thermochromic luminescence as revealed by temperature‐dependent emission spectra. The enhanced room‐temperature emission is characterized as thermally activated delayed fluorescence.     

Time‐Resolved Synchrotron Radiation Excited Optical Luminescence: Light‐Emission Properties of Silicon‐Based Nanostructures

The recent advances in the study of light emission from matter induced by synchrotron radiation: X‐ray excited optical luminescence (XEOL) in the energy domain and time‐resolved X‐ray excited optical luminescence (TRXEOL) are described. The development of these element (absorption edge) selective, synchrotron X‐ray photons in, optical photons out techniques with time gating coincide with advances in third‐generation, insertion device based, synchrotron light sources. Electron bunches circulating in a storage ring emit very bright, widely energy tunable, short light pulses (<100 ps), which are used as the excitation source for investigation of light‐emitting materials. Luminescence from silicon nanostructures (porous silicon, silicon nanowires, and Si–CdSe heterostructures) is used to illustrate the applicability of these techniques and their great potential in future applications.     

Ligand‐Assisted Gold‐Catalyzed Cross‐Coupling with Aryldiazonium Salts: Redox Gold Catalysis without an External Oxidant

Gold‐catalyzed C(sp)–C(sp²) and C(sp²)–C(sp²) cross‐coupling reactions are accomplished with aryldiazonium salts as the coupling partner. With the assistance of bpy ligand, gold(I) species were oxidized to gold(III) by diazonium without any external oxidants. Monitoring the reaction with NMR and ESI‐MS provided strong evidence for the nitrogen extrusion followed by Au^III reductive elimination as the key step.     

Uranium Oxide Nanocrystals by Microwave‐Assisted Thermal Decomposition: Electronic and Structural Properties

Uranium oxides have attracted much attention not only in the context of nuclear energy generation but also for their application as pristine catalysts or as supports for other (transition metal) oxides and (precious) metals. Their propensity to adopt high coordination numbers and manifest multiple oxidation states (from +II to +VI) makes them attractive candidates for catalyzed transformation reactions. Herein, we report a new synthesis route to phase‐pure, crystalline UO₂ nanoparticles via microwave‐assisted decomposition of a molecular uranium(IV) precursor. The electronic structure and optical absorption properties of these nanocrystals were investigated using spectroscopic methods to evaluate their suitability for photo(electro)catalytic applications.     

Gold(I)‐Catalyzed Diazo Cross‐Coupling: A Selective and Ligand‐Controlled Denitrogenation/Cyclization Cascade

An unprecedented gold‐catalyzed ligand‐controlled cross‐coupling of diazo compounds by sequential selective denitrogenation and cyclization affords N‐substituted pyrazoles in a position‐switchable mode. This novel transformation features selective decomposition of one diazo moiety and simultaneous preservation of the other one from two substrates. Notably, the choice of the ancillary ligand to the gold complex plays a pivotal role on the chemo‐ and regioselectivity of the reactions.     

Structures and Dynamic Solution Behavior of Cationic,Two‐Coordinate Gold(I)–π‐Allene Complexes

A family of seven cationic gold complexes that contain both an alkyl substituted π‐allene ligand and an electron‐rich, sterically hindered supporting ligand was isolated in >90 % yield and characterized by spectroscopy and, in three cases, by X‐ray crystallography. Solution‐phase and solid‐state analysis of these complexes established preferential binding of gold to the less substituted C?C bond of the allene and to the allene π face trans to the substituent on the uncomplexed allenyl C?C bond. Kinetic analysis of intermolecular allene exchange established two‐term rate laws of the form rate=k₁[complex]+k₂[complex][allene] consistent with allene‐independent and allene‐dependent exchange pathways with energy barriers of ΔG^≠₁=17.4–18.8 and ΔG^≠₂=15.2–17.6 kcal mol^?1, respectively. Variable temperature (VT) NMR analysis revealed fluxional behavior consistent with facile (ΔG^≠=8.9–11.4 kcal mol^?1) intramolecular exchange of the allene π faces through η¹‐allene transition states and/or intermediates that retain a staggered arrangement of the allene substituents. VT NMR/spin saturation transfer analysis of [{P(tBu)₂o‐binaphthyl}Au(η²‐4,5‐nonadiene) ]⁺SbF₆^? ( 5 ), which contains elements of chirality in both the phosphine and allene ligands, revealed no epimerization of the allene ligand below the threshold for intermolecular allene exchange (ΔG^≠_298K=17.4 kcal mol^?1), which ruled out the participation of a η¹‐allylic cation species in the low‐energy π‐face exchange process for this complex.     

Spin‐Crossover Complex on Au(111): Structural and Electronic Differences Between Mono‐ and Multilayers

Submono‐, mono‐ and multilayers of the Fe(II) spin‐crossover (SCO) complex [Fe(bpz)₂(phen)] (bpz=dihydrobis(pyrazolyl)borate, phen=1,10‐phenanthroline) have beenprepared by vacuum deposition on Au(111) substrates and investigated with near edge X‐ray absorption fine structure (NEXAFS) spectroscopy and scanning tunneling microscopy (STM). As evidenced by NEXAFS, molecules of the second layer exhibit a thermal spin crossover transition, although with a more gradual characteristics than in the bulk. For mono‐ and submonolayers of [Fe(bpz)₂(phen)] deposited on Au(111) substrates at room temperature both NEXAFS and STM indicate a dissociation of [Fe(bpz)₂(phen)] on Au(111) into four‐coordinate complexes, [Fe(bpz)₂], and phen molecules. Keeping the gold substrate at elevated temperatures ordered monolayers of intact molecules of [Fe(bpz)₂(phen)] are formed which can be spin‐switched by electron‐induced excited spin‐state trapping (ELIESST).     

Thin‐Film Properties of DNA and RNA Bases: A Combined Experimental and Theoretical Study

The structures of the DNA and RNA bases cytosine, uracil, and thymine in thin films with a nominal film thickness of about 20 nm are studied by using X‐ray photoemission spectroscopy (XPS) and Fourier‐transform infrared spectroscopy. The molecules are evaporated in situ from powder on a gold foil. The experimental results indicate that cytosine is composed of two energetically close tautomeric forms, whereas uracil and thymine exist in only one tautomeric form. Additionally, quantum chemical calculations are performed to complement the experimental results. The relative energies of the tautomeric forms of cytosine, uracil, and thymine are calculated using Hartree–Fock (HF), density functional theory (DFT), and post‐HF methods. Furthermore, the assignment of the XPS spectra is supported by using simple model considerations employing Koopmans ionization energies and Mulliken net atomic charges.     

Anionic Gold(I) Complexes—Twelve‐ and Ten‐Vertex Monocarba‐closo‐borate Anions with Carbon–Gold σ Bonds

The anionic gold(I) complexes [1‐(Ph₃PAu)‐closo‐1‐CB₁₁H₁₁]^? ( 1 ), [1‐(Ph₃PAu)‐closo‐1‐CB₉H₉]^? ( 2 ), and [2‐(Ph₃PAu)‐closo‐2‐CB₉H₉]^? ( 3 ) with gold–carbon 2c–2e σ bonds have been prepared from [AuCl(PPh₃)] and the respective carba‐closo‐borate dianion. The anions have been isolated as their Cs⁺ salts and the corresponding [Et₄N]⁺ salts were obtained by salt metathesis reactions. The salt Cs‐ 3 isomerizes in the solid state and in solution at elevated temperatures to Cs‐ 2 with ΔH_iso=(?75±5) kJ mol^?1 (solid state) and ΔH^≠=(118±10) kJ mol^?1 (solution). The compounds were characterized by vibrational and multi‐NMR spectroscopies, mass spectrometry, elemental analysis, and differential scanning calorimetry. The crystal structures of [Et₄N]‐ 1 , [Et₄N]‐ 2 , and [Et₄N]‐ 3 were determined. The bonding parameters, NMR chemical shifts, and the isomerization enthalpy of Cs‐ 3 to Cs‐ 2 are compared to theoretical data.     

Synthesis and Characterization of Novel Gold(III) Complexes of Asymmetrically Aryl‐Substituted 1,2‐Dithiolene Ligands Featuring Potential‐Controlled Spectroscopic Properties

The tetrabutylammonium (TBA⁺) salts of square‐planar monoanionic gold complexes of the unsymmetrically substituted Ar,H‐edt^2? 1,2‐dithiolene ligands (Ar,H‐edt^2?=arylethylene‐1,2‐dithiolato; Ar=phenyl ( 1 ^?), 2‐naphthyl ( 2 ^?), and 1‐pyrenyl ( 3 ^?)) were synthesized and characterized by spectroscopic and electrochemical methods and the corresponding neutral species ( 1 , 2 , and 3 , respectively) were obtained in CH₂Cl₂ solution at room temperature by diiodine oxidation. The single‐crystal X‐ray diffraction structural data collected for (TBA⁺)( 2 ^?), supported by DFT theoretical calculations, are consistent with the ene‐1,2‐dithiolate form of the ligand and the Au^III oxidation state. All complexes feature intense near‐IR absorptions (at about 1.5 μm) in their neutral states and Vis‐emitting properties in the 400–550 nm range, the energy of which is controlled by the charge of the complex in the case of the 3 ^?/ 3 couple. The spectroscopic and electrochemical features of 1 ^x? and 2 ^x? (x=0, 1), both in their cis and trans conformations, were investigated by means of DFT and time‐dependent (TD) DFT calculations.     

Novel polyamidoamine‐based hydrogel with an innovative molecular architecture as a Co2+‐, Ni2+‐, and Cu2+‐sorbing material: Cyclovoltammetry and extended X‐ray absorption fine structure studies

An amphoteric polyamidoamine (PAA)‐based hydrogel, named INT‐PAA1, with a novel molecular architecture was prepared and studied as a Co²⁺‐, Ni²⁺‐, and Cu²⁺‐sorbing material. This hydrogel was obtained by the synthesis of a PAA in the presence of a second presynthesized PAA carrying many primary amino groups as side substituents, which acted as a macromolecular crosslinking agent. Therefore, it had an intersegmented structure. INT‐PAA1 exhibited a remarkable sorption capacity and sorption rate for Co²⁺, Ni²⁺, and Cu²⁺ that were advantageously in situ monitored by cyclic voltammetry. An extended X‐ray absorption fine structure spectroscopy characterization of the Co²⁺/INT‐PAA1 complex was also performed. The very fast and quantitative metal‐ion uptake, made apparent by an intense coloring of the hydrogel, showed remarkable potential for environmental applications such as heavy‐metal detection, recovery, and elimination. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2316–2327, 2006     

Environmentally Friendly γ‐MnO2 Hexagon‐Based Nanoarchitectures: Structural Understanding and Their Energy‐Saving Applications

Although about 200,000 metric tons of γ‐MnO₂ are used annually worldwide for industrial applications, the γ‐MnO₂ structure is still known to possess a highly ambiguous crystal lattice. To better understand the γ‐MnO₂ atomic structure, hexagon‐based nanoarchitectures were successfully synthesized and used to elucidate its internal structure for the present work. The structural analysis results, obtained from the hexagon‐based nanoarchitectures, clearly show the coexistence of akhtenskite (ε‐MnO₂), pyrolusite (β‐MnO₂), and ramsdellite in the so‐called γ‐MnO₂ phase and verified the heterogeneous phase assembly of the γ‐MnO₂ state, which violates the well‐known “De Wolff” model and derivative models, but partially accords with Heuer's results. Furthermore, heterogeneous γ‐MnO₂ assembly was found to be a metastable structure under hydrothermal conditions, and the individual components of the heterogeneous γ‐MnO₂ system have structural similarities and a high lattice matches with pyrolusite (β‐MnO₂). The as‐obtained γ‐MnO₂ nanoarchitectures are nontoxic and environmentally friendly, and the application of such nanoarchitectures as support matrices successfully mitigates the common problems for phase‐change materials of inorganic salts, such as phase separation and supercooling‐effects, thereby showing prospect in energy‐saving applications in future “smart‐house” systems.