Dehydrogenation of dodecahydro-N-ethylcarbazole on Pd/Al2O3 model catalysts

To elucidate the dehydrogenation mechanism of dodecahydro-N-ethylcarbazole (H(12)-NEC) on supported Pd catalysts, we have performed a model study under ultra high vacuum (UHV) conditions. H(12)-NEC and its final dehydrogenation product, N-ethylcarbazole (NEC), were deposited by physical vapor deposition (PVD) at temperatures between 120 K and 520 K onto a supported model catalyst, which consisted of Pd nanoparticles grown on a well-ordered alumina film on NiAl(110). Adsorption and thermally induced surface reactions were followed by infrared reflection absorption spectroscopy (IRAS) and high-resolution X-ray photoelectron spectroscopy (HR-XPS) in combination with density functional theory (DFT) calculations. It was shown that, at 120 K, H(12)-NEC adsorbs molecularly both on the Al(2)O(3)/NiAl(110) support and on the Pd particles. Initial activation of the molecule occurs through C-H bond scission at the 8a- and 9a-positions of the carbazole skeleton at temperatures above 170 K. Dehydrogenation successively proceeds with increasing temperature. Around 350 K, breakage of one C-N bond occurs accompanied by further dehydrogenation of the carbon skeleton. The decomposition intermediates reside on the surface up to 500 K. At higher temperatures, further decay to small fragments and atomic species is observed. These species block most of the absorption sites on the Pd particles, but can be oxidatively removed by heating in oxygen at 600 K, fully restoring the original adsorption properties of the model catalyst.     

New Reactions of N‐tert‐Butylimines; Formation of N‐Heterocycles by Methyl Radical Elimination on Flash Vacuum Thermolysis of N‐Benzylidene‐ and N‐(2‐Pyridylmethylidene)‐tert‐butylamines

Thermal reactions of N‐benzylidene‐ and N‐(2‐pyridylmethylidene)‐tert‐butylamines ( 5 and 13 ) under FVT conditions have been investigated. Unexpectedly, at 800 °C, compound 5 yields 1,2‐dimethylindole and 3‐methylisoquinoline. In the reaction of 13 at 800 °C, 3‐methylimidazo[1,5‐a]pyridine was obtained as the major product. Mechanisms of these reactions have been proposed on the basis of DFT calculations. Furthermore, UV‐photoelectron spectroscopy combined with FVT has been applied for direct monitoring and characterization of the thermolysis products in situ.     

Vacuum Surface Science Meets Heterogeneous Catalysis: Dehydrogenation of a Liquid Organic Hydrogen Carrier in the Liquid State

Ultrahigh vacuum (UHV) surface science techniques are used to study the heterogeneous catalytic dehydrogenation of a liquid organic hydrogen carrier in its liquid state close to the conditions of real catalysis. For this purpose, perhydrocarbazole (PH), otherwise volatile under UHV, is covalently linked as functional group to an imidazolium cation, forming a non‐volatile ionic liquid (IL). The catalysed dehydrogenation of the PH unit as a function of temperature is investigated for a Pt foil covered by a macroscopically thick PH‐IL film and for Pd particles suspended in the PH‐IL film, and for PH‐IL on Au as inert support. X‐ray photoelectron spectroscopy and thermal desorption spectroscopy allows us to follow in situ the catalysed transition of perhydrocarbazole to carbazole at technical reaction temperatures. The data demonstrate the crucial role of the Pt and Pd catalysts in order to shift the dehydrogenation temperature below the critical temperature of thermal decomposition.     

Oxygen Functionalization of Hexagonal Boron Nitride on Ni(111)

The interaction of single-layer hexagonal boron nitride (h-BN) on Ni(111) with molecular oxygen from a supersonic molecular beam led to a covalently bonded molecular oxygen species, which was identified as being between a superoxide and a peroxide. This is a rare example of an activated adsorption process leading to a molecular adsorbate. The amount of oxygen functionalization depended on the kinetic energy of the molecular beam. For a kinetic energy of 0.7 eV, an oxygen coverage of 0.4 ML was found. Near-edge X-ray adsorption fine structure (NEXAFS) spectroscopy revealed a stronger bond of h-BN to the Ni(111) substrate in the presence of the covalently bound oxygen species. Oxygen adsorption also led to a shift of the valence bands to lower binding energies. Subsequent temperature-programmed X-ray photoelectron spectroscopy revealed that the oxygen boron bonds are stable up to approximately 580 K, when desorption, and simultaneously, etching of h-BN set in. The experimental results were substantiated by density functional theory calculations, which provided insight to the adsorption geometry, the adsorption energy and the reaction pathway.     

Base‐Free Non‐Noble‐Metal‐Catalyzed Hydrogen Generation from Formic Acid: Scope and Mechanistic Insights

The iron‐catalyzed dehydrogenation of formic acid has been studied both experimentally and mechanistically. The most active catalysts were generated in situ from cationic Fe^II/Fe^III precursors and tris[2‐(diphenylphosphino)ethyl]phosphine ( 1 , PP₃). In contrast to most known noble‐metal catalysts used for this transformation, no additional base was necessary. The activity of the iron catalyst depended highly on the solvent used, the presence of halide ions, the water content, and the ligand‐to‐metal ratio. The optimal catalytic performance was achieved by using [FeH(PP₃)]BF₄/PP₃ in propylene carbonate in the presence of traces of water. With the exception of fluoride, the presence of halide ions in solution inhibited the catalytic activity. IR, Raman, UV/Vis, and EXAFS/XANES analyses gave detailed insights into the mechanism of hydrogen generation from formic acid at low temperature, supported by DFT calculations. In situ transmission FTIR measurements revealed the formation of an active iron formate species by the band observed at 1543 cm^?1, which could be correlated with the evolution of gas. This active species was deactivated in the presence of chloride ions due to the formation of a chloro species (UV/Vis, Raman, IR, and XAS). In addition, XAS measurements demonstrated the importance of the solvent for the coordination of the PP₃ ligand.     

Interaction of NO2 with Model NSR Catalysts: Metal–Oxide Interaction Controls Initial NOx Storage Mechanism

Using scanning tunneling microscopy (STM), molecular‐beam (MB) methods and time‐resolved infrared reflection absorption spectroscopy (TR‐IRAS), we investigate the mechanism of initial NO_x uptake on a model nitrogen storage and reduction (NSR) catalyst. The model system is prepared by co‐deposition of Pd metal particles and Ba‐containing oxide particles onto an ordered alumina film on NiAl(110). We show that the metal–oxide interaction between the active noble metal particles and the NO_x storage compound in NSR model catalysts plays an important role in the reaction mechanism. We suggest that strong interaction facilitates reverse spillover of activated oxygen species from the NO_x storage compound to the metal. This process leads to partial oxidation of the metal nanoparticles and simultaneous stabilization of the surface nitrite intermediate.     

Isolated β‐Turn Model Systems Investigated by Combined IR/UV Spectroscopy

The functionality of bioactive molecules sensitively depends on their structure. For the investigation of intrinsic structural properties, molecular beam experiments combined with laser spectroscopy have proven to be a suitable tool. Herein we present an analysis of the two isolated tripeptide model systems Ac‐Phe‐Tyr(Me)‐NHMe and Boc‐Phe‐Tyr(Me)‐NHMe. For this purpose, mass‐selective combined IR/UV spectroscopy is applied to both substances in a molecular beam experiment. The comparison of the experimental data with DFT calculations, including different functionals as well as dispersion corrections, allows an assignment of both tripeptide models to β‐turns formed independently from the protection groups and supported by the interaction of the two aromatic chromophores.     

On-Surface Metathesis of an Ionic Liquid on Ag(111)

We investigated the adsorption, surface enrichment, ion exchange, and on-surface metathesis of ultrathin mixed IL films on Ag(111). We stepwise deposited 0.5 ML of the protic IL diethylmethylammonium trifluoromethanesulfonate ([dema][TfO]) and 1.0 ML of the aprotic IL 1-methyl-3-octylimidazolium hexafluorophosphate ([C₈C₁Im][PF₆]) at around 90 K. Thereafter, the resulting layered frozen film was heated to 550 K, and the thermally induced phenomena were monitored in situ by angle-resolved X-ray photoelectron spectroscopy. Between 135 and 200 K, [TfO]⁻ anions at the Ag(111) surface are exchanged by [PF₆]⁻ anions and enriched together with [C₈C₁Im]⁺ cations at the IL/vacuum interface. Upon further heating, [dema][PF₆] and [OMIm][PF₆] desorb selectively at ∼235 and ∼380 K, respectively. Hereby, a wetting layer of pure [C₈C₁Im][TfO] is formed by on-surface metathesis at the IL/metal interface, which completely desorbs at ∼480 K. For comparison, ion enrichment at the vacuum/IL interface was also studied in macroscopic IL mixtures, where no influence of the solid support is expected.     

Two‐Dimensional Ketone‐Driven Metal–Organic Coordination on Cu(111)

Two‐dimensional metal–organic nanostructures based on the binding of ketone groups and metal atoms were fabricated by depositing pyrene‐4,5,9,10‐tetraone (PTO) molecules on a Cu(111) surface. The strongly electronegative ketone moieties bind to either copper adatoms from the substrate or codeposited iron atoms. In the former case, scanning tunnelling microscopy images reveal the development of an extended metal–organic supramolecular structure. Each copper adatom coordinates to two ketone ligands of two neighbouring PTO molecules, forming chains that are linked together into large islands through secondary van der Waals interactions. Deposition of iron atoms leads to a transformation of this assembly resulting from the substitution of the metal centres. Density functional theory calculations reveal that the driving force for the metal substitution is primarily determined by the strength of the ketone–metal bond, which is higher for Fe than for Cu. This second class of nanostructures displays a structural dependence on the rate of iron deposition.     

Coverage‐ and Temperature‐Dependent Metalation and Dehydrogenation of Tetraphenylporphyrin on Cu(111)

Using temperature‐programmed desorption, supported by X‐ray photoelectron spectroscopy and scanning tunneling microscopy, a comprehensive overview of the main reactions of 5,10,15,20‐tetraphenyl‐21H,23H‐porphyrin (2HTPP) on Cu(111) as a function of coverage and temperature is obtained. Three reactions were identified: metalation with Cu substrate atoms, stepwise partial dehydrogenation, and finally complete dehydrogenation. At low coverage the reactions are independent of coverage, but at higher coverage metalation becomes faster and partial dehydrogenation slower. This behavior is explained by a weaker interaction between the iminic nitrogen atoms and the Cu(111) surface in the high‐coverage checkerboard structure, leading to faster metalation, and the stabilizing effect of T‐type interactions in the CuTPP islands formed at high coverage after metalation, leading to slower dehydrogenation. Based on the amount of hydrogen released and the appearance in STM, a structure of the partially dehydrogenated molecule is suggested.     

The direct observation of 2H‐DPP metalation on Pd(111) and Cu/Pd(111) surface

The metalation behaviors of 5,15‐diphenylporphyrin (2H‐DPP) on Pd(111) and Cu/Pd(111) have been investigated using scanning tunneling microscopy and density functional calculations. We show that 2H‐DPP molecules deposited on Pd(111) surface form Pd‐DPP with a proportion of about 75% already at room temperature (RT). This is in contrast to non‐metalation adsorption of 2H‐DPP on Cu–Pd alloy at RT. Annealing to 323 K facilitates the metalation of 2H‐DPP on Cu–Pd alloy island. The comparison of the results indicates that the metalation of 2H‐DPP calls for both enough surface free energy of approaching N? H bond and enough reactivity of breaking N? H bond. Copyright © 2016 John Wiley & Sons, Ltd.     

甲烷在清洁Pd(111)及氧改性的Pd(111)表面解离的密度泛函理论研究

 采用广义梯度近似 (GGA) 的密度泛函理论 (DFT) 并结合平板模型, 研究了 CH4 在清洁 Pd(111) 及 O 改性的 Pd(111) 表面发生 C朒 键断裂的反应历程. 优化了裂解过程中反应物、过渡态和产物的几何构型, 获得了反应路径上各物种的吸附能及反应的活化能. 结果表明, CH4 采用一个 H 原子指向表面的构型在 Pd(111) 表面的顶位吸附, CH3 的最稳定的吸附位置为顶位, OH, O 和 H 的最稳定吸附位置均为面心立方. CH4 在清洁 Pd(111) 表面裂解的活化能为 0.97 eV, 低于它在 O 原子改性 (O 没有参与反应) 的 Pd(111) 表面的活化能 1.42 eV, 说明表面氧原子抑制了 CH4 中 C朒 键的断裂. 当亚表面 O 原子和表面 O 原子 (O 参与反应) 共同存在时, C朒 键断裂的活化能为 0.72 eV, 低于只有表层氧存在时的活化能 (1.43 eV), 说明亚表面的 O 原子对 CH4 分子的活化具有促进作用. CH4 在 O 原子改性的 Pd(111) 表面裂解生成 CH3 和 H, 以及生成 CH3 和 OH 的反应活化能分别为 1.42 和 1.43 eV, 说明 CH4 在 O 原子改性的 Pd(111) 表面发生这两种反应的难易程度相当.     

Dry Reforming of Methane on a Highly‐Active Ni‐CeO2 Catalyst: Effects of Metal‐Support Interactions on C−H Bond Breaking

Ni‐CeO₂ is a highly efficient, stable and non‐expensive catalyst for methane dry reforming at relative low temperatures (700 K). The active phase of the catalyst consists of small nanoparticles of nickel dispersed on partially reduced ceria. Experiments of ambient pressure XPS indicate that methane dissociates on Ni/CeO₂ at temperatures as low as 300 K, generating CH_x and CO_x species on the surface of the catalyst. Strong metal–support interactions activate Ni for the dissociation of methane. The results of density‐functional calculations show a drop in the effective barrier for methane activation from 0.9 eV on Ni(111) to only 0.15 eV on Ni/CeO_2?x(111). At 700 K, under methane dry reforming conditions, no signals for adsorbed CH_x or C species are detected in the C 1s XPS region. The reforming of methane proceeds in a clean and efficient way.     

The Unexpected Mechanism Underlying the High‐Valent Mono‐Oxo‐Rhenium(V) Hydride Catalyzed Hydrosilylation of CN Functionalities: Insights from a DFT Study

In this study, we theoretically investigated the mechanism underlying the high‐valent mono‐oxo‐rhenium(V) hydride Re(O)HCl₂(PPh₃)₂ ( 1 ) catalyzed hydrosilylation of C?N functionalities. Our results suggest that an ionic S_N2‐Si outer‐sphere pathway involving the heterolytic cleavage of the Si?H bond competes with the hydride pathway involving the C?N bond inserted into the Re?H bond for the rhenium hydride ( 1 ) catalyzed hydrosilylation of the less steric C?N functionalities (phenylmethanimine, PhCH=NH, and N‐phenylbenzylideneimine, PhCH=NPh). The rate‐determining free‐energy barriers for the ionic outer‐sphere pathway are calculated to be ～28.1 and 27.6 kcal mol^?1, respectively. These values are slightly more favorable than those obtained for the hydride pathway (by ～1–3 kcal mol^?1), whereas for the large steric C?N functionality of N,1,1‐tri(phenyl)methanimine (PhCPh=NPh), the ionic outer‐sphere pathway (33.1 kcal mol^?1) is more favorable than the hydride pathway by as much as 11.5 kcal mol^?1. Along the ionic outer‐sphere pathway, neither the multiply bonded oxo ligand nor the inherent hydride moiety participate in the activation of the Si?H bond.     

Molecular Dynamics Simulation of the Self-assembled Monolayers of 1-Adamantanethiolate and Its Derivatives on Au（111） Surfaces

The self-assembled monolayers （SAMs） of 1-adamantanethiolate and its derivatives on Au（111） surface were investigated. Density functional theory （DFT） calculation indicates that the most stable configuration for absorption is at the face centered cubic （fcc）-bridge site. Canonical ensemble molecular dynamics （MD） simulations were carried out to study the structures and energies of the SAMs. The ordered structures of the SAMs were analyzed by means of radial distribution function and the relative stability of the SAMs was compared. It was concluded by the comparison of various contributions to the SAM formation energy that the formation of the SAMs was determined by the intermolecular nonbonding interaction and the chemical bonding interaction of sulfur and gold.     

Selective oxidation of styrene on an oxygen‐adsorbed Cu(111): A comparison with Au(111)

The reaction mechanism for the styrene selective oxidation on the oxygen preadsorbed Cu(111) surface has been studied by the density functional theory calculation with the periodic slab model. The calculated result indicated that the process includes two steps: forming the oxametallacycle intermediate (OMMS) and then producing the products. In addition, it was found that the second step, from OMMS to the product, is the rate‐controlling step, which is similar to the previous work of ethylene selective oxidation. The present result indicated that the selectivity towards the formation of styrene epoxide on Cu(111) is much higher than that on Au(111). More importantly, we found that the mechanism via the OMMS (2) (i.e., the preadsorbed atomic oxygen bound to the CH₂ group involved in C₆H₅? CH?CH₂) to produce styrene epoxide is kinetically favored than that of OMMS (1). We also found that the selectivity toward the styrene epoxide formation on Cu₂O is similar to that of Cu(111). © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

Experimental and theoretical investigation of the molecular and electronic structure of N′‐benzylidene‐N‐[4‐(3‐methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐chloro‐acetic acid hydrazide

The title compound, N′‐benzylidene‐N‐[4‐(3‐methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐chloro‐acetic acid hydrazide, has been synthesized and characterized by elemental analysis, IR, ¹H and ¹³C NMR, and X‐ray single crystal diffraction. The compound crystallizes in the orthorhombic space group P 21 21 21 with a = 5.8671 (3) Å, b = 17.7182 (9) Å, and c = 20.6373 (8) Å. Moreover, the molecular geometry from X‐ray experiment, the molecular geometry, vibrational frequencies, and gauge‐including atomic orbital ¹H and ¹³C chemical shift values of the title compound in the ground state have been calculated by using the Hartree–Fock and density functional methods (B3LYP) with 6‐31G(d) and 6‐31G(d,p) basis sets. The results of the optimized molecular structure are exhibited and compared with the experimental X‐ray diffraction. Besides, molecular electrostatic potential, Frontier molecular orbitals, and thermodynamic properties of the title compound were determined at B3LYP/6‐31G(d) levels of theory. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

The Role of Free N‐Heterocyclic Carbene (NHC) in the Catalytic Dehydrogenation of Ammonia–Borane in the Nickel NHC System

Enders' N‐heterocyclic carbene (NHC) dehydrogenates ammonia–borane with a relatively low barrier, producing NH₂BH₂ and NHC–(H)₂. The nickel NHC catalyst present in the reaction media can activate the NHC–(H)₂ produced to regenerate the free NHC and release H₂. The release of free NHC enables further dehydrogenation of ammonia–borane.