Solvent‐Induced Structural Transition of Self‐Assembled Dipeptide: From Organogels to Microcrystals

Organogels that are self‐assembled from simple peptide molecules are an interesting class of nano‐ and mesoscale soft matter with simplicity and functionality. Investigating the precise roles of the organic solvents and their effects on stabilization of the formed organogel is an important topic for the development of low‐molecular‐weight gelators. We report the structural transition of an organogel self‐assembled from a single dipeptide building block, diphenylalanine (L ‐Phe‐L ‐Phe, FF), in toluene into a flower‐like microcrystal merely by introducing ethanol as a co‐solvent; this provides deeper insights into the phase transition between mesostable gels and thermodynamically stable microcrystals. Multiple characterization techniques were used to reveal the transitions. The results indicate that there are different molecular‐packing modes formed in the gels and in the microcrystals. Further studies show that the co‐solvent, ethanol, which has a higher polarity than toluene, might be involved in the formation of hydrogen bonds during molecular self‐assembly of the dipeptide in mixed solvents, thus leading to the transition of organogels into microcrystals. The structural transformation modulated by the co‐solvent might have a potential implication in controllable molecular self‐assembly.     

Solvent‐Polarity‐Tuned Morphology and Inversion of Supramolecular Chirality in a Self‐Assembled Pyridylpyrazole‐Linked Glutamide Derivative: Nanofibers,Nanotwists, Nanotubes,and Microtubes

The self‐assembly of a low‐molecular‐weight organogelator into various hierarchical structures has been achieved for a pyridylpyrazole linked L ‐glutamide amphiphile in different solvents. Upon gel formation, supramolecular chirality was observed, which exhibited an obvious dependence on the polarity of the solvent. Positive supramolecular chirality was obtained in nonpolar solvents, whereas it was inverted into negative supramolecular chirality in polar solvents. Moreover, the gelator molecules self‐assembled into a diverse array of nanostructures over a wide scale range, from nanofibers to nanotubes and microtubes, depending on the solvent polarity. Such morphological changes could even occur for the xerogels in the solvent vapors. We found that the interactions between the pyridylpyrazole headgroups and the solvents could subtly change the stacking of the molecules and, hence, their self‐assembled nanostructures. This work exemplifies that organic solvents can significantly involve the gelation, as well as tune the structure and properties, of a gel.     

Vicinal Solvent Effect on Supramolecular Gelation: Alcohol Controlled Topochemical Reaction and the Toruloid Nanostructure

Although solvent is the major component of the gel, it still remains unclear how the solvent molecules take part in the formation of the gel nanostructures in many gels. In this study it was observed that the vicinal effect on gel formation as well as their nanostructures, that is, the vicinal solvent molecules to the gelator, determine the molecular packing and their subsequent structures and properties. A naphthylacryl‐conjugated L ‐glutamide gelator was found to form organogels in various solvents and nanofiber structures. While the nanofibers from other solvents could not show any further reaction, the gel from the alcohol could undergo topochemical [2+2] cycloaddition under photoirradiation and resulted in toruloid nanostructures. Various pure alcohol solvents from methanol to pentanol were found to show a similar property. Interestingly, switching from a single alcohol solvent to mixed solvents of alcohol with miscible or immiscible non‐alcohol solvents could still cause the same change, showing the vicinal effect of alcohol on controlling the molecular packing as well as the structural transformation. More interestingly, when nanofiber xerogel, obtained from non‐alcohol solvents, was exposed to alcohol vapor, the nanofiber was transferred into nanotoruloid. These results provide a new insight into the gelator–solvent interaction in soft gels.     

Self‐Assembly of π‐Conjugated Gelators into Emissive Chiral Nanotubes: Emission Enhancement and Chiral Detection

A series of new π‐conjugated gelators that contain various aromatic rings (phenyl, naphthyl, 9‐anthryl) and amphiphilic L ‐glutamide was designed, and their gel formation in organic solvents and self‐assembled nanostructures was investigated. The gelators showed good gelation ability in various organic solvents that ranged from polar to nonpolar. Those gelator molecules with small rings such as phenyl and naphthyl self‐assembled into nanotube structures in most organic solvents and showed strong blue emission. However, the 9‐anthryl derivative formed only a nanofiber structure in any organic solvent, probably owing to the larger steric hindrance. All of these gels showed enhanced fluorescence in organogels. Furthermore, during the gel formation, the chirality at the L ‐glutamide moiety was transferred to the nanostructures, thus leading to the formation of chiral nanotubes. One of the nanotubes showed chiral recognition toward the chiral amines.     

Oligopeptide‐Assisted Self‐Assembly of Oligothiophenes: Co‐Assembly and Chirality Transfer

The biomolecule‐assisted self‐assembly of semiconductive molecules has been developed recently for the formation of potential bio‐based functional materials. Oligopeptide‐assisted self‐assembly of oligothiophene through weak intermolecular interactions was investigated; specifically the self‐assembly and chirality‐transfer behavior of achiral oligothiophenes in the presence of an oligopeptide with a strong tendency to form β‐sheets. Two kinds of oligothiophenes without (QT) or with (QTDA) carboxylic groups were selected to explore the effect of the end functional group on self‐assembly and chirality transfer. In both cases, organogels were formed. However, the assembly behavior of QT was quite different from that of QTDA. It was found that QT formed an organogel with the oligopeptide and co‐assembled into chiral nanostructures. Conversely, although QTDA also formed a gel with the oligopeptide, it has a strong tendency to self‐assemble independently. However, during the formation of the xerogel, the chirality of the oligopeptide can also be transferred to the QTDA assemblies. Different assembly models were proposed to explain the assembly behavior.     

Synthesis and Supramolecular Self‐Assembly of Coil‐Rod‐Coil Molecules: The Relationship between Self‐Assembled Nanostructures and Molecular Structures

Herein, the relationship between the supramolecularly self‐assembled nanostructures and the chemical structures of coil‐rod‐coil molecules is discussed. A series of nonamphiphilic coil‐rod‐coil molecules with different alkyl chains, central mesogenic groups, and chemical linkers were designed and synthesized. The solvent‐mediated supramolecular self‐assembling of these coil‐rod‐coil molecules resulted in rolled‐up nanotubes, nanofibers, submicron sized belts, needle‐like microcrystals, and amorphous structures. The self‐assembling behaviors of these coil‐rod‐coil molecules have been systematically investigated to reveal the relationship between the supramolecularly self‐assembled nanostructures and their chemical structures. With respect to the formation of rolled‐up nanotubes by self‐assembly of coil‐rod‐coil molecules, we have systematically investigated the following three influencing structural factors: 1) the alkyl chain length; 2) the central mesogenic group; (3) the linker type. These studies disclosed the key structural features of coil‐rod‐coil molecules for the formation of rolled‐up nanotubes.     

From Bola‐amphiphiles to Supra‐amphiphiles: The Transformation from Two‐Dimensional Nanosheets into One‐Dimensional Nanofibers with Tunable‐Packing Fashion of n‐Type Chromophores

With a rational design of the supra‐amphiphiles, we have successfully demonstrated that not only the dimension of the self‐assembled nanostructures, but also the packing fashion of the functional naphthalene diimide (a typical n‐type chromophore), can be tuned in a noncovalent way in aqueous solution. Naphthalene diimide is incorporated into a bola‐amphiphile as the rigid core, whereas viologen derivatives are used as the hydrophilic head. The bola‐amphiphile self‐assembles into two‐dimensional nanosheets, in which naphthalene diimide adopts a “J‐type” aggregation. Water‐soluble supramolecular complexation between viologen derivatives and the 8‐hydroxypyrene‐1, 3, 6‐trisulfonic acid trisodium salt is used as a driving force for the formation of the supra‐amphiphiles. Upon formation of the supra‐amphiphiles, the nanosheets transform into ultralong nanofibers with a close packing of naphthalene diimide. Notably, just by mixing the two building blocks of the supra‐amphiphiles in aqueous solution, a dimension‐controlled evolution of the nanostructures is formed that leads to a different packing fashion of the n‐type functional chromophores, which is facile and environmental friendly.     

In Situ Gel‐to‐Crystal Transition and Synthesis of Metal Nanoparticles Obtained by Fluorination of a Cyclic β‐Aminoalcohol Gelator

A new fluorinated version of a cyclic β‐aminoalcohol gelator derived from 1,2,3,4‐tetrahydroisoquinoline is presented. The gelator is able to gel various nonprotic solvents through OH???N hydrogen bonds and additional CH???F interactions due to the introduction of fluorine. A bimolecular lamellar structure is formed in the gel phase, which partly preserves the pattern of molecular organization in the single crystal. The racemate of the chiral gelator shows lower gelation ability than its enantiomer because of a higher tendency to form microcrystals, as shown by X‐ray diffraction analysis. The influence of fluorination on the self‐assembly of the gelator and the properties of the gel was investigated in comparison to the original fluorine‐free gel system. The introduction of fluorine brings two new features. The first is good recognition of o‐xylene by the gelator, which induces an in situ transition from gels of o‐xylene and of an o‐xylene/toluene mixture to identical single crystals with unique tubular architecture. The second is the enhanced stability of the toluene gel towards ions, including quaternary ammonium salts, which enables the preparation of a stable toluene gel in the presence of chloroaurate or chloroplatinate. The gel system can be used as a template for the synthesis of spherical gold nanoparticles with a diameter of 5 to 9 nm and wormlike platinum nanostructures with a diameter of 2 to 3 nm and a length of 5 to 12 nm. This is the first example of a synthesis of platinum nanoparticles in an organogel medium. Therefore, the appropriate introduction of a fluorine atom and corresponding nonbonding interactions into a known gelator to tune the properties and functions of a gel is a simple and effective tactic for design of a gel system with specific targets.     

Precursor‐involved and Conversion Rate‐controlled Self‐assembly of a 'Super Gelator' in Thixotropic Hydrogels for Drug Delivery

Enzymatic hydrogelation is a totally different process to the heating‐cooling gelation process, in which the precursors of the gelators can be involved during the formation of self‐assembled structures. Using thixotropic hydrogels formed by a super gelator as our studied system, we demonstrated that the enzyme concentration/conversion rate of enzymatic reaction had a strong influence on the morphology of resulting self‐assembled nanostructures and the property of resulting hydrogels. The principle demonstrated in this study not only helps to understand and elucidate the phenomenon of self‐assembly triggered by enzymes in biological systems, but also offers a unique methodology to control the morphology of self‐assembled structures for specific applications such as controlled drug release.     

Rose‐Like Microstructures of Polyaniline by Using a Simplified Template‐Free Method under a High Relative Humidity

3‐D rose‐like microstructures of polyaniline (PANI), which are self‐assembled from 2‐D nanosheets consisted of 1‐D nanofibers, were synthesized by a template‐free method in the presence of ammonium peroxydisulfate (APS) as both oxidant and dopant under a high relative humidity of 80% for the first time. When the relative humidity increases from 25 to 80%, not only morphology of the micro/nanostructured PANI undergoes a change from 1‐D nanofibers to 2‐D nanosheets to 3‐D rose‐like microstructures, but also increase in crystallinity. It is proposed that a cooperation effect of the oriented water molecules at the vapor–water interface and difference in hydrogen bonding energies between the interface and the bulk induced by the relative high humidity results in the formation of the 3‐D rose‐like microstructures self‐assembled from 2‐D nanosheets. Moreover, the method reported may provide a simple approach for understanding self‐assembly of complex micro/nanostructures of PANI.

     

Near‐Infrared‐Emissive Amphiphilic BODIPY Assemblies Manipulated by Charge‐Transfer Interaction: From Nanofibers to Nanorods and Nanodisks

A novel near‐infrared (NIR)‐emissive amphiphilic BODIPY derivative, BBDP, was successfully prepared and thoroughly characterized. The photophysical properties in various organic solvents and THF/H₂O mixtures with different fractions of water were investigated. BBDP self‐assembled into nanofibers in a water environment owing to its amphiphilic properties. Through charge‐transfer interactions, BBDP co‐assembled with a perylene bisimide derivative, PBI, and a viologen derivative, MV, to generate two superamphiphiles. These two superamphiphiles were able to aggregate in water media at appropriate concentrations. The BBDP–PBI charge‐transfer complex formed nanorods, whereas the BBDP–MV aggregates expressed a disk‐like morphology. This research paves the way for us to manipulate the morphology of dye assemblies.     

Synthesis and hierarchical superstructures of side‐chain liquid crystal polyacetylenes containing galactopyranoside end‐groups

Three kinds of chiral saccharide‐containing liquid crystalline (LC) acetylenic monomers were prepared by click reaction between 2‐azidoethyl‐2,3,4,6‐tetraacetyl‐β‐D ‐galactopyranoside and 1‐biphenylacetylene 4‐alkynyloxybenzoate. The obtained monomers were polymerized by WCl₆‐Ph₄Sn to form three side‐chain LC polyacetylenes containing 1‐[2‐(2,3,4,6‐tetraacetyl‐β‐D ‐galactopyranos‐1‐yl)‐ethyl]‐1H‐[1,2,3]‐triazol‐4′‐biphenyl 4‐alkynyloxybenzoate side groups. All monomers and polymers show a chiral smectic A phase. Self‐assembled hiearchical superstructures of the chiral saccharide‐containing LCs and LCPs in solution state were studied by field‐emission scanning electron microscopy. Because of the LC behavior, the LC molecules exhibit a high segregation strength for phase separation in dilute solution (THF/H₂O = 1:9 v/v). The self‐assembled morphology of LC monomers was dependent upon the alkynyloxy chain length. Increasing the alkynyloxy chain length caused the self‐assembled morphology to change from a platelet‐like texture ( LC‐6 ) to helical twists morphology ( LC‐11 and LC‐12 ). Furthermore, the helical twist morphological structure can be aligned on the polyimide rubbed glass substrate to form two‐dimensional ordered helical patterns. In contrast to LC monomers, the LCP‐11 self‐assembled into much more complicate morphologies, including nanospheres and helical nanofibers. These nanofibers are evolved from the helical cables ornamented with entwining nanofibers upon natural evaporation of the solution in a mixture with a THF/methanol ratio of 3:7. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6596–6611, 2009     

Synthesis and Gelation Behavior of Cholesteryl Glycinate Anthraquinone‐2‐Carboxylamide and Cholesteryl Glycinate 9,10‐Dimethyloxyl Anthracene‐2‐Carboxylamide

Cholesteryl glycinate anthraquinone‐2‐carboxylamide (CGAC), an electron acceptor, and cholesteryl glycinate 9,10‐dimethyloxyl anthracene‐2‐carboxylamide (CGDAC), an electron donor, were synthesized and characterized via ¹H NMR, IR and elemental analysis. Gelation studies demonstrated that acetic acid and some mixed solvents containing more than 30% acetic acid could be efficiently gelled by CGAC. Unlike CGAC, CGDAC could not gel any of the solvents tested. SEM and AFM studies showed that the gelator in the gel system of CGAC‐acetic acid self‐assembled into a fiber‐like tubular structure, and the tubules were further self‐tangled into networks. Introduction of CGDAC into the CGAC‐acetic acid system had little effect upon the gel properties of the CGAC‐acetic acid system. This observation was explained by considering interruption of the possible donor‐acceptor interaction between CGAC and CGDAC due to protonation of the latter. Comparing the structure and gelation properties of CGAC with those of similar structures reported in the literature further indicates that a small change in the structure of the linker between the A (aromatic) part and S (steroidal) part of the ALS type gelators affects the gelation behaviors of the ALS type gelators significantly.     

Synthesis and self‐assembly of helical polypeptide‐random coil amphiphilic diblock copolymer

Three amphiphilic rod‐coil diblock copolymers, poly(2‐ethyl‐2‐oxazoline‐b‐γ‐benzyl‐L ‐glutamate) (PEOz‐b‐PBLG), incorporating the same‐length PEOz block length and various lengths of their PBLG blocks, were synthesized through a combining of living cationic and N‐carboxyanhydride (NCA) ring‐opening polymerizations. In the bulk, these block copolymers display thermotropic liquid crystalline behavior. The self‐assembled aggregates that formed from these diblock copolymers in aqueous solution exhibited morphologies that differed from those obtained in α‐helicogenic solvents, that is, solvents in which the PBLG blocks adopt rigid α‐helix conformations. In aqueous solution, the block copolymers self‐assembled into spherical micelles and vesicular aggregates because of their amphiphilic structures. In helicogenic solvents (in this case, toluene and benzyl alcohol), the PEOz‐b‐PBLG copolymers exhibited rod‐coil chain properties, which result in a diverse array of aggregate morphologies (spheres, vesicles, ribbons, and tube nanostructures) and thermoreversible gelation behavior. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3108–3119, 2008     

Poly(dimethylsiloxane)‐based polymer organogelators with L‐lysine derivatives as a organogelation‐causing segment

New poly(dimethylsiloxane)‐based polymer organogelators with L ‐lysine derivatives were synthesized on the basis of synthetically simple procedure, and their organogelation abilities were investigated. These polymer organogelators have a good organogelation ability and form organogels in many organic solvents. In the organogels, polymer gelators constructed a mesoporous structure with a pore size of about 1 μm formed by entanglement of the self‐assembled nanofibers. The L ‐lysine derivatives in the polymer gelators functioned as a gelation‐causing segment and the organogelation was induced by self‐assembly of the L ‐lysine segments through a hydrogen bonding interaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3817–3824, 2006     

Pyrene‐Based Fluorescent Ambidextrous Gelators: Scaffolds for Mechanically Robust SWNT–Gel Nanocomposites

With the rapid progress in the development of supramolecular soft materials, examples of low‐molecular‐weight gelators (LMWGs) with the ability to immobilise both water and organic solvents by the same structural scaffold are very limited. In this paper, we report the development of pyrene‐containing peptide‐based ambidextrous gelators (AGs) with the ability to efficiently gelate both organic and aqueous solvents. The organo‐ and hydrogelation efficiencies of these gelators are in the range 0.7–1.1 % w/v in various organic solvents and 0.5–5 % w/v in water at certain acidic pH values (pH 2.0–4.0). Moreover, for the first time, AGs have been utilised to prepare single‐walled carbon‐nanotube (SWNT)‐included soft nanocomposites in both hydro‐ and organogel matrices. The influence of different non‐covalent interactions such as hydrogen bonding, hydrophobic, π–π and van der Waals interactions in self‐assembled gelation has been studied in detail by circular dichroism, FTIR, variable‐temperature NMR, 2D NOESY and luminescence spectroscopy. Interestingly, the presence of the pyrene moiety in the structure rendered these AGs intrinsically fluorescent, which was quenched upon successful integration of the SWNTs within the gel. The prepared hydro‐ and organogels along with their SWNT‐integrated nanocomposites are thermoreversible in nature. The supramolecular morphologies of the dried gels and SWNT–gel nanocomposites have been studied by transmission electron microscopy, fluorescence microscopy and polarising optical microscopy, which confirmed the presence of three‐dimensional self‐assembled fibrillar networks (SAFINs) as well as the integrated SWNTs. Importantly, rheological studies revealed that the inclusion of SWNTs within the ambidextrous gels improved the mechanical rigidity of the resulting soft nanocomposites up to 3.8‐fold relative to the native gels.     

Solvent‐Driven Chiral‐Interaction Reversion for Organogel Formation

For chiral gels and related applications, one of the critical issues is how to modulate the stereoselective interaction between the gel and the chiral guest precisely, as well as how to translate this information into the macroscopic properties of materials. Herein, we report that this process can also be modulated by nonchiral solvents, which can induce a chiral‐interaction reversion for organogel formation. This process could be observed through the clear difference in gelation speed and the morphology of the resulting self‐assembly. This chiral effect was successfully applied in the selective separation of quinine enantiomers and imparts “smart” merits to the gel materials.     

Gelation of a Highly Fluorescent Urea‐Containing Triarylmelamine Derivative: 2,4,6‐Tris(p‐N′‐Octadecylureido‐Anilino)Triazine in Organic Solvents

A new gelator of urea‐containing triazine derivatives was synthesized and tested in order to explore the gelation potential in different organic solvents. This compound has been found to form organogels with a variety of organic solvents such as decalin and other solvents. The resulting thermo‐reversible gel was characterized by using the dropping ball method and a number of other instruments. The melting temperature of the gel increased with the gel concentration. The intermolecular hydrogen bonding of gelation was demonstrated through an FT‐IR spectrometer. UV‐Vis and fluorescence analysis showed that the gel displayed various optical effects in different organic solvents. The blue fluorescence of the gel in decalin and the quenched effect of gel in CHCl³ were displayed, respectively. Morphological features in decalin and CHCl₃ were studied by applying atomic force microscopy (AFM), and the morphological features demonstrated that there were different aggregations in different solvents. In conductivity electrolyte experiments, the organogel electrolytes indicated high conductivity (σ) comparable to the corresponding NaClO₄/THF solution. The conductivity of gel electrolytes was increased with electrolyte salt.     

Direct Transformation of N,N′‐Methylene Bisacrylamide Self‐Assembled Fibers Into Polymer Microtubes via RAFT Polymerization

A novel fabrication method of polymer tubes with simple operation process and high yield is presented. N,N′‐methylene bisacrylamide (MBA) polymer microtubes are fabricated via reversible addition–fragmentation chain transfer (RAFT) polymerization using MBA self‐assembled fibers as both the template and monomer source. The resulting products are characterized by SEM, TEM, FTIR, and element analysis. The mechanical properties of the gel‐like product and the MBA organogel are measured by rheometer. The morphology of the polymer tubes obtained via RAFT polymerization is compared with the sample obtained via conventional radical polymerization. Based on the current investigations, the fabrication mechanism of this method is initially proposed.     

Preparation of non‐spherical particles from amphiphilic block copolymers

Simple self‐assembly techniques to fabricate non‐spherical polymer particles, where surface composition and shape can be tuned through temperature and the choice of non‐solvents was developed. A series of amphiphilic polystyrene‐b‐poly(2‐ethyl‐2‐oxazoline) block copolymers were prepared and through solvent exchange techniques using varying non‐solvent composition a range of non‐spherical particles were formed. Faceted phase separated particles approximately 300 nm in diameter were obtained when self‐assembled from tetrahydrofuran (THF) into water compared with unique large multivesicular particles of 1200 nm size being obtained when assembled from THF into ethanol (EtOH). A range of intermediate structures were also prepared from a three part solvent system THF/water/EtOH. These techniques present new tools to engineer the self‐assembly of non‐spherical polymer particles. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 750–757