What Far‐Infrared Spectra Can Contribute to the Development of Force Fields for Ionic Liquids Used in Molecular Dynamics Simulations

Symbiosis: Far‐infrared spectra can be used to check the quality of force fields for molecular dynamics simulations of ionic liquids. On the other hand, MD simulations can explain the molecular basis of measured properties for this new liquid material (see picture).

     

Speciation of Aluminium in Mixtures of the Ionic Liquids [C3mpip][NTf2] and [C4mpyr][NTf2] with AlCl3: An Electrochemical and NMR Spectroscopy Study

This paper reports on the electrodeposition of aluminium on several substrates from the air‐ and water‐stable ionic liquids 1‐propyl‐1‐methylpiperidinium bis(trifluoromethylsulfonyl)amide ([C₃mpip][NTf₂]) and 1‐butyl‐1‐methylpyrrolidinium bis(trifluoromethylsulfonyl)amide ([C₄mpyr][NTf₂]), which contain anhydrous AlCl₃. At an AlCl₃ concentration of 0.75 molal, no evidence for aluminium electrodeposition was observed in either system at room temperature. However, aluminium electrodeposition becomes feasible upon heating the samples to 80 °C. Aluminium electrodeposition from bis(trifluoromethylsulfonyl)amide‐based ionic liquids that contain AlCl₃ has previously been shown to be very dependent upon the AlCl₃ concentration and has not been demonstrated at AlCl₃ concentrations below 1.13 molal. The dissolution of AlCl₃ in [C₃mpip][NTf₂] and [C₄mpyr][NTf₂] was studied by variable‐temperature ²⁷Al NMR spectroscopy to gain insights on the electroactive species responsible for aluminium electrodeposition. A similar change in the aluminium speciation with temperature was observed in both ionic liquids, thereby indicating that the chemistry was similar in both. The electrodeposition of aluminium was shown to coincide with the formation of an asymmetric four‐coordinate aluminium‐containing species with an ²⁷Al chemical shift of δ=94 and 92 ppm in the [C₃mpip][NTf₂]–AlCl₃ and [C₄mpyr][NTf₂]–AlCl₃ systems, respectively. It was concluded that the aluminium‐containing species that give rise to these resonances corresponds to the electroactive species and was assigned to [AlCl₃(NTf₂)]^?.     

Mass Distribution and Diffusion of [1‐Butyl‐3‐methylimidazolium][Y] Ionic Liquids Adsorbed on the Graphite Surface at 300–800 K

The structure and diffusion behavior of 1‐butyl‐3‐methylimidazolium ([bmim]⁺) ionic liquids with [Cl]^?, [PF₆]^?, and [Tf₂N]^? counterions near a hydrophobic graphite surface are investigated by molecular dynamics simulation over the temperature range of 300–800 K. Near the graphite surface the structure of the ionic liquid differs from that in the bulk and it forms a well‐ordered region extending over 30 Å from the surface. The bottom layer of the ionic liquid is stable over the investigated temperature range due to the inherent slow dynamics of the ionic liquid and the strong Coulombic interactions between cation and anion. In the bottom layer, diffusion is strongly anisotropic and predominantly occurs along the graphite surface. Diffusion perpendicular to the interface (interfacial mass transfer rate k_t) is very slow due to strong ion–substrate interaction. The diffusion behaviors of the three ionic liquids in the two directions all follow an Arrhenius relation, and the activation barrier increases with decreasing anion size. Such an Arrhenius relation is applied to surface‐adsorbed ionic liquids for the first time. The ion size and the surface electrical charge density of the anions are the major factors determining the diffusion behavior of the ionic liquid adjacent to the graphite surface.     

Ionic Association of the Ionic Liquids [C4mim][BF4], [C4mim][PF6], and [Cnmim]Br in Molecular Solvents

Considering the ionic nature of ionic liquids (ILs), ionic association is expected to be essential in solutions of ILs and to have an important influence on their applications. Although numerous studies have been reported for the ionic association behavior of ILs in solution, quantitative results are quite scarce. Herein, the conductivities of the ILs [C_nmim]Br (n=4, 6, 8, 10, 12), [C₄mim][BF₄], and [C₄mim][PF₆] in various molecular solvents (water, methanol, 1‐propanol, 1‐pentanol, acetonitrile, and acetone) are determined at 298.15 K as a function of IL concentration. The conductance data are analyzed by the Lee–Wheaton conductivity equation in terms of the ionic association constant (K_A) and the limiting molar conductance (Λ_m⁰). Combined with the values for the Br^? anion reported in the literature, the limiting molar conductivities and the transference numbers of the cations and [BF₄]^? and [PF₆]^? anions are calculated in the molecular solvents. It is shown that the alkyl chain length of the cations and type of anion affect the ionic association constants and limiting molar conductivities of the ILs. For a given anion (Br^?), the Λ_m⁰ values decrease with increasing alkyl chain length of the cations in all the molecular solvents, whereas the K_A values of the ILs decrease in organic solvents but increase in water as the alkyl chain length of the cations increases. For the [C₄mim]⁺ cation, the limiting molar conductivities of the ILs decrease in the order Br^?>[BF₄]^?>[PF₆]^?, and their ionic association constants follow the order [BF₄]^?>[PF₆]^?>Br^? in water, acetone, and acetonitrile. Furthermore, and similar to the classical electrolytes, a linear relationship is observed between ln K_A of the ILs and the reciprocal of the dielectric constants of the molecular solvents. The ILs are solvated to a different extent by the molecular solvents, and ionic association is affected significantly by ionic solvation. This information is expected to be useful for the modulation of the IL conductance by the alkyl chain length of the cations, type of anion, and physical properties of the molecular solvents.     

Thermomorphic Behavior of the Ionic Liquids [C4mim][FeCl4] and [C12mim][FeCl4]

The iron‐containing ionic liquids 1‐butyl‐3‐methylimidazolium tetrachloroferrate(III) [C₄mim][FeCl₄] and 1‐dodecyl‐3‐methylimidazolium tetrachloroferrate(III) [C₁₂mim][FeCl₄] exhibit a thermally induced demixing with water (thermomorphism). The phase separation temperature varies with IL weight fraction in water and can be tuned between 100 °C and room temperature. The reversible lower critical solution temperature (LCST) is only observed at IL weight fractions below ca. 35 % in water. UV/Vis, IR, and Raman spectroscopy along with elemental analysis prove that the yellow‐brown liquid phase recovered after phase separation is the starting IL [C₄mim][FeCl₄] and [C₁₂mim][FeCl₄], respectively. Photometry and ICP‐OES show that about 40 % of iron remains in the water phase upon phase separation. Although the process is thus not very efficient at the moment, the current approach is the first example of an LCST behavior of a metal‐containing IL and therefore, although still inefficient, a prototype for catalyst removal or metal extraction.     

离子液体[Cnpy][NTf2] (n=2, 4, 5)的动力粘度和电导率

在298.15-338.15 K和283.15-338.15 K温度范围内,分别测量了N-烷基吡啶双三氟甲磺酸亚胺(烷基链分别为:乙基、丁基、戊基)三种疏水型离子液体的动力粘度和电导率.利用Arrhenius 方程和Fulcher 方程将测量的动力粘度和电导率对温度拟合,得到了动力粘度和电导率随温度变化方程式.从电导率和密度计算出了上述三种离子液体在283.15-338.15 K温度范围内的摩尔电导率.应用Walden 规则,描述了动力粘度与摩尔电导率之间的关系.     

Molecular Dynamics Simulation of the Ionic Liquid 1-n-Butyl-3-Methylimidazolium Methylsulfate [Bmim][MeSO4]: Interfacial Properties at the Silica and Vacuum Interfaces

Molecular dynamics simulations are done to investigate the structure and dynamics of a thin [Bmim][MeO₄] film in contact with a hydroxylated silica surface on one side and with vacuum on the other. An examination of the microscopic structure of ionic liquid (IL) film shows that strong layered anionic/cationic structures are formed at both interfaces. At the silica interface, the imidazolium rings are closer to the silica surface (compared to anions) and are coplanar with it. At the vacuum interface, the charged imidazolium ring more concentrates in the interior of the film, but the butyl side chain stretches out toward the vacuum interface. While there exists an excess concentration of the cations at the silica interface, at the vacuum interface an excess concentration of anions (dissolved in the butyl chain) is found. The influence of the interface on the dynamical properties is shown to depend on their time scales. A short-time dynamical property, such as hydrogen bond formation is not noticeably perturbed at the interface. In contrary, long-time properties such as ion-pair formation/rupture and translation of ions across the film are largely decelerated at the silica interface but are accelerate at the vacuum interface. Our findings indicate that the structural relaxation time of ion-pairs, is comparable to diffusion time scale in the IL film. Therefore, ion-pairs are not stable species; the IL is composed of short-lived ion-pairs and freely diffusing ions. However, the structural relaxation times of ion-pairs is still long enough (comparable to the time scale of diffusion) to conclude that correlated motions of counterions influence the macroscopic properties of IL, such as diffusion and ionic conductivity. In this respect, we have shown that correcting the Nernst-Einstein equation for the joint translation of ion-pairs considerably improves the accuracy of calculated ionic conductivities.     

Temperature Dependence of the Viscosity and Conductivity of Mildly Functionalized and Non‐Functionalized [Tf2N]− Ionic Liquids

A series of bis(trifluoromethylsulfonyl)imide ionic liquids (ILs) with classical as well as mildly functionalized cations was prepared and their viscosities and conductivities were determined as a function of the temperature. Both were analyzed with respect to Arrhenius, Litovitz and Vogel–Fulcher–Tammann (VFT) behaviors, as well as in the context of their molecular volume (V_m). Their viscosity and conductivity are highly correlated with V_m/T or related expressions (R²≥0.94). With the knowledge of V_m of new cations, these correlations allow the temperature‐dependent prediction of the viscosity and conductivity of hitherto unknown, non‐ or mildly functionalized ILs with low error bars (0.05 and 0.04 log units, respectively). The influence of the cation structure and mild functionalization on the physical properties was studied with systematically altered cations, in which V_m remained similar. The T_o parameter obtained from the VFT fits was compared to the experimental glass temperature (T_g) and the T_g/T_o ratio for each IL was calculated using both experimental values and Angell’s relationship. With Walden plots we investigated the IL ionicity and interpreted it in relation to the cation effects on the physical IL properties. We checked the validity of these V_m/T relations by also including the recently published variable temperature viscosity and conductivity data of the [Al(OR^F)₄]^? ILs with R^F=C(H)(CF₃)₂ (error bars for the prediction: 0.09 and 0.10 log units, respectively).     

Correlation between Dynamic Heterogeneity and Local Structure in a Room‐Temperature Ionic Liquid: A Molecular Dynamics Study of [bmim][PF6]

The complex dynamics of a room‐temperature ionic liquid, 1‐n‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim][PF₆]), is studied using equilibrium classical molecular dynamics simulations in the temperature range of 250–450 K. The activation energies for the self‐diffusion of ions are around 30–34 kJ mol^?1, with that of the anion a little higher than that for the cation. The electrical conductivity of the liquid is calculated and good agreement with experiments is obtained. Structural relaxation is studied through the decay of coherent (total density–density correlation) and incoherent (self part of density–density correlation) intermediate scattering functions over a range of temperatures and wave vectors relevant to the system. The relaxation data are used to identify and characterize two processes, α and β. The dependence of the two relaxation times on temperature and wave vector is obtained. The dynamical heterogeneity of the ions determined through the non‐Gaussian parameter indicates the motion of the cation to be more heterogeneous than that of the anion. The faster ones among the cations are coordinated to faster anions, while slower cations are surrounded predominantly by slower anions. Thus, the dynamical heterogeneity in this ionic liquid is shown to have structural signatures.     

Halide‐Free Synthesis of Hydrochalcogenide Ionic Liquids of the Type [Cation][HE] (E=S,Se, Te)

We present the synthesis and thorough characterization of ionic liquids and organic salts based on hydrochalcogenide HE^? (E=S, Se, Te) anions. Our approach is based on halide‐, metal‐, and water‐free decarboxylation of methylcarbonate precursors under acidic conditions, resulting from the easily dissociating reagents H₂E. The compounds were characterized by elemental analysis, multinuclear NMR spectroscopy, thermal and single‐crystal XRD analyses. The hydrosulfide salts were investigated with respect to their ability to dissolve elemental sulfur in varying stoichiometry. Thus‐prepared polysulfide ILs were also analyzed by UV/Vis spectroscopy and cyclic voltammetry.     

On the Dynamic Interaction of n‐Butane with Imidazolium‐Based Ionic Liquids

The impact of a reactant from the gas phase on the surface of a liquid and its transfer through this gas/liquid interface are crucial for various concepts applying ionic liquids (ILs) in catalysis. We investigated the first step of the adsorption dynamics of n‐butane on a series of 1‐alkyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide ILs ([C_nC₁Im][Tf₂N]; n=1, 2, 3, 8). Using a supersonic molecular beam in ultra‐high vacuum, the trapping of n‐butane on the frozen ILs was determined as a function of surface temperature, between 90 and 125 K. On the C₈‐ and C₃‐ILs, n‐butane adsorbs at 90 K with an initial trapping probability of ≈0.89. The adsorption energy increases with increasing length of the IL alkyl chain, whereas the ionic headgroups seem to interact only weakly with n‐butane. The absence of adsorption on the C₁‐ and C₂‐ILs is attributed to a too short residence time on the IL surface to form nuclei for condensation even at 90 K.     

Dynamics of Methanol in Ionic Liquids: Validity of the Stokes–Einstein and Stokes–Einstein–Debye Relations

The validity of Stokes–Einstein (SE) and Stokes–Einstein–Debye (SED) relations for methanol in the physical environment of the ionic liquid (IL) 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide is studied by means of nuclear magnetic resonance (NMR) relaxation time experiments, viscosity measurements and molecular dynamics (MD) simulations. The reorientational correlation times of the hydroxyl groups of pure methanol and of methanol in the IL/methanol mixtures were determined. For that purpose an approach for estimating NMR deuteron quadrupole coupling constants, presented by Wendt and Farrar (Mol. Phys.­ 1998 , 95, 1077–1081), was confirmed. The self‐diffusion coefficients of methanol were taken from the MD simulations. The viscosities of all systems were then measured and the SE and SED relations validated. For pure methanol both relations are valid, whereas they become increasingly invalid with increasing IL concentration, as indicated by effective volumes and radii that are too low. The deviation from the SE and SED relations could be related to dynamical heterogeneities described by the non‐Gaussian parameter α(t) obtained from MD simulations. For pure methanol, α(t) is close to zero in accord with the validity of both relations. With increasing IL concentration the dynamical heterogeneities of methanol increase strongly. The times t* at the maximum of α(t) increase linearly with the relative number of methanol monomers in the mixtures. Thus, the dynamical heterogeneities are largest for single methanol molecules fully embedded in the IL environment. In their own environment methanol molecules are highly mobile, whereas in the IL‐rich region the mobility is strongly reduced leading to the non‐validity of SE and SED relations.     

Liquid‐Crystalline Ionic Liquids as Ordered Reaction Media for the Diels–Alder Reaction

Liquid‐crystalline ionic liquids (LCILs) are ordered materials that have untapped potential to be used as reaction media for synthetic chemistry. This paper investigates the potential for the ordered structures of LCILs to influence the stereochemical outcome of the Diels–Alder reaction between cyclopentadiene and methyl acrylate. The ratio of endo‐ to exo‐product from this reaction was monitored for a range of ionic liquids (ILs) and LCILs. Comparison of the endo:exo ratios in these reactions as a function of cation, anion and liquid crystallinity of the reaction media, allowed for the effects of liquid crystallinity to be distinguished from anion effects or cation alkyl chain length effects. These data strongly suggest that the proportion of exo‐product increases as the reaction media is changed from an isotropic IL to a LCIL. A detailed molecular dynamics (MD) study suggests that this effect is related to different hydrogen bonding interactions between the reaction media and the exo‐ and endo‐transition states in solvents with layered, smectic ordering compared to those that are isotropic.     

Electrochemical Determination of Manganese Solubility in Mercury via Amalgamation and Stripping in the Room Temperature Ionic Liquid n‐Hexyltriethylammonium Bis(trifluoromethanesulfonyl)imide, [N6,2,2,2][NTf2]

The solubility of manganese in mercury was determined electrochemically via amalgamation and stripping in the room temperature ionic liquid n‐hexyltriethylammonium bis(trifluoromethanesulfonyl)imide, [N_6,2,2,2][NTf₂]. A hemispherical mercury electrode was made by electrodepositing mercury onto a planar platinum microelectrode. Cyclic voltammetry of Mn²⁺ in [N_6,2,2,2][NTf₂] at the mercury microhemisphere electrode was investigated at temperatures of 298, 303 and 313 K. The solubility of Mn in Hg was determined on the basis of the charge under the reduction peak (Mn²⁺→Mn⁰) and the corresponding reoxidation.     

[C_4mim][PF_6]和[C_4mim][NTf_2]离子液体辐射诱导的相行为及荧光行为变化

离子液体因其低挥发性,高热稳定性及优良的萃取性能被认为是萃取分离放射性核素的新一代绿色溶剂,而研究离子液体本身的辐射效应是其实际应用的重要前提.本文以~(60)Co为辐射源,系统研究了γ辐照对两种常见的憎水性咪唑离子液体1-丁基-3-甲基咪唑六氟磷酸盐([C_4mim][PF_6])和1-丁基-3-甲基咪唑三氟甲基磺酰胺酸盐([C_4mim][NTf_2])的相行为及荧光行为的影响.在相行为方面,γ辐照使离子液体的结晶驰豫时间增加,导致其低温结晶延迟.在荧光行为方面,γ辐照后离子液体的荧光光谱保持原有的"红边效应(red edge effect)",但随吸收剂量增加,光谱整体发生红移(最大移动幅度达150 nm).并且这种"红边效应"在辐照后离子液体的乙腈稀释剂中仍然存在,且随稀释倍数增加光谱整体发生蓝移.[C_4mim][PF_6]和[C_4mim][NTf_2]离子液体辐照后的这种相行为及荧光行为的变化可归因于辐照对其阴阳离子空间相关性(缔合行为)的影响.     

Silica-Supported Ionic Liquid Si-[SbSipim][PF6]: An Efficient Catalyst for the Synthesis of 3,4-Dihydropyrimidine-2-(1H)-ones

Silica-supported sulfonic acid–functional ionic liquid (Si-[SbSipim][PF₆]) was found to be an effective catalyst for the synthesis of 3,4-dihydropyrimidine-2-(1H)-ones via a one-pot, three-component Biginelli reaction. The catalyst could be easily separated and reused six times without noticeable reduction inactivity. The process was simple and proceeded in excellent yields.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Confinement of Ionic Liquids in Nanocages: Tailoring the Molecular Sieving Properties of ZIF‐8 for Membrane‐Based CO2 Capture

Fine‐tuning of effective pore size of microporous materials is necessary to achieve precise molecular sieving properties. Herein, we demonstrate that room temperature ionic liquids can be used as cavity occupants for modification of the microenvironment of MOF nanocages. Targeting CO₂ capture applications, we tailored the effective cage size of ZIF‐8 to be between CO₂ and N₂ by confining an imidazolium‐based ionic liquid [bmim][Tf₂N] into ZIF‐8’s SOD cages by in‐situ ionothermal synthesis. Mixed matrix membranes derived from ionic liquid‐modified ZIF‐8 exhibited remarkable combinations of permeability and selectivity that transcend the upper bound of polymer membranes for CO₂/N₂ and CO₂/CH₄ separation. We observed an unusual response of the membranes to varying pressure, that is, an increase in the CO₂/CH₄ separation factor with pressure, which is highly desirable for practical applications in natural gas upgrading.