Copper‐Exchanged Tungstophosphoric Acid: An Efficient and Reusable Heteropoly Acid for the Synthesis of 2,3,4,5‐Tetrahydro‐4‐methylidenefuran Derivatives

Copper‐exchanged tungstophosphoric acid (Cu‐TPA) is found to catalyze efficiently the coupling of propargyl alcohol (prop‐2‐yn‐1‐ol) with (arylmethylidene)malononitriles to afford the corresponding 2,3,4,5‐tetrahydro‐4‐methylidenefuran derivatives in good yields and with high selectivity. The catalyst is recycled and reused for three‐to‐four subsequent runs with a minimal decrease of activity.     

Copper(I)‐Catalyzed Interrupted Click Reaction: Synthesis of Diverse 5‐Hetero‐Functionalized Triazoles

The 5‐heterofunctionalized triazoles are important scaffolds in bioactive compounds, but current click reactions (CuAAC) cannot produce these core structures. A copper(I)‐catalyzed interrupted click reaction to access diverse 5‐functionalized triazoles is reported. Various 5‐amino‐, thio‐, and selenotriazoles were readily assembled in one step in high yields. The reaction proceeds under mild conditions with complete regioselectivity. It also features a broad substrate scope and good functional group compatibility.     

Alumina Supported 12‐Tungstophosphoric Acid as an Efficient and Reusable Catalyst for Synthesis of 1,5‐Benzodiazepines

Alumina supported 12‐tungstophosphoric acid catalyzes efficiently the reaction of o‐phenylenediamine with ketones under solvent‐free condition to afford the corresponding 1,5‐benzodiazepines in good to excellent yields. The catalyst can be recovered and reused.     

Copper(II) Acetylacetonate: An Efficient Catalyst for Huisgen‐Click Reaction for Synthesis of 1,2,3‐Triazoles in Water

An efficient and green copper(II ) acetylacetonate‐catalyzed protocol for the Huisgen‐click reaction in water at 100 °C has been established. The protocol was not only suitable for the reaction between organic azides and alkynes, but also suitable for one‐pot three‐component reaction among alkyl halides, NaN₃ and alkynes.     

On Water: An Efficient Knoevenagel Condensation using 12‐Tungstophosphoric Acid as a Reusable Green Catalyst

12‐Tungstphosphoric acid is found to be an efficient, environmentally attractive, and reusable catalyst for Knoevenagel condensation of malononitrile and ethylcyanoacetate with various aldehydes.     

Azidoperfluoroalkanes: Synthesis and Application in Copper(I)‐Catalyzed Azide–Alkyne Cycloaddition

We report an efficient and scalable synthesis of azidotrifluoromethane (CF₃N₃) and longer perfluorocarbon‐chain analogues (R_FN₃; R_F=C₂F₅, ⁿ C₃F₇, ⁿ C₈F₁₇), which enables the direct insertion of CF₃ and perfluoroalkyl groups into triazole ring systems. The azidoperfluoroalkanes show good reactivity with terminal alkynes in copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC), giving access to rare and stable N ‐perfluoroalkyl triazoles. Azidoperfluoroalkanes are thermally stable and the efficiency of their preparation should be attractive for discovery programs.     

Combining Oxidative N‐Heterocyclic Carbene Catalysis with Click Chemistry: A Facile One‐Pot Approach to 1,2,3‐Triazole Derivatives

A combination of the oxidative N‐heterocyclic carbene catalysis and click chemistry has been explored for the direct, one‐pot synthesis of 1,2,3‐triazole derivatives from aromatic aldehydes. This procedure was found to be very efficient and a variety of 1,2,3‐triazole derivatives could be accessed through their corresponding propargyl esters in moderate‐to‐good yields under mild conditions.     

One‐Pot Synthesis of 4‐Aryl‐NH‐1,2,3‐Triazoles through Three‐Component Reaction of Aldehydes,Nitroalkanes and NaN3

A one‐pot three‐component reaction of aldehydes, nitroalkanes and NaN₃ for the synthesis of NH ‐1,2,3‐triazoles has been developed. The reaction provides a safe, efficient and step‐economic approach for the synthesis of various NH ‐1,2,3‐triazoles in good to excellent yields.     

Lewis Acid Catalyzed Asymmetric Three‐Component Coupling Reaction: Facile Synthesis of α‐Fluoromethylated Tertiary Alcohols

A chiral dicationic palladium complex is found to be an efficient Lewis acid catalyst for the synthesis of α‐fluoromethyl‐substituted tertiary alcohols using a three‐component coupling reaction. The reaction transforms three simple and readily available components (terminal alkyne, arene, and fluoromethylpyruvate) to valuable chiral organofluorine compounds. This strategy is completely atom‐economical and results in perfect regioselectivities and high enantioselectivities of the corresponding tertiary allylic alcohols in good to excellent yields.     

An Enolate‐Mediated Organocatalytic Azide–Ketone [3+2]‐Cycloaddition Reaction: Regioselective High‐Yielding Synthesis of Fully Decorated 1,2,3‐Triazoles

An enolate‐mediated organocatalytic azide–ketone [3+2]‐cycloaddition (OrgAKC) reaction of a variety of enolizable arylacetones and deoxybenzoins with aryl azides was developed for the synthesis of fully decorated 1,4‐diaryl‐5‐methyl(alkyl)‐1,2,3‐triazoles in excellent yields with high regioselectivity at 25 °C for 0.5–6 h. This reaction has an excellent outcome with reference to reaction rate, yield, regioselectivity, operation simplicity, and availability of substrates and catalyst. This reaction has advantages over the previously known metal‐mediated reactions.     

Click Mechanochemistry: Quantitative Synthesis of “Ready to Use” Chiral Organocatalysts by Efficient Two‐Fold Thiourea Coupling to Vicinal Diamines

Mechanochemical methods of neat grinding and liquid‐assisted grinding have been applied to the synthesis of mono‐ and bis(thiourea)s by using the click coupling of aromatic and aliphatic diamines with aromatic isothiocyanates. The ability to modify the reaction conditions allowed the optimization of each reaction, leading to the quantitative formation of chiral bis(thiourea)s with known uses as organocatalysts or anion sensors. Quantitative reaction yields, combined with the fact that mechanochemical reaction conditions avoid the use of bulk solvents, enabled solution‐based purification methods (such as chromatography or recrystallization) to be completely avoided. Importantly, by using selected model reactions, we also show that the described mechanochemical reaction procedures can be readily scaled up to at least the one‐gram scale. In that way, mechanochemical synthesis provides a facile method to fully transform valuable enantiomerically pure reagents into useful products that can immediately be applied in their designed purpose. This was demonstrated by using some of the mechanochemically prepared reagents as organocatalysts in a model Morita–Baylis–Hillman reaction and as cyanide ion sensors in organic solvents. The use of electronically and sterically hindered ortho‐phenylenediamine revealed that mechanochemical reaction conditions can be readily optimized to form either the 1:1 or the 1:2 click‐coupling product, demonstrating that reaction stoichiometry can be more efficiently controlled under these conditions than in solution‐based syntheses. In this way, it was shown that excellent stoichiometric control by mechanochemistry, previously established for mechanochemical syntheses of cocrystals and coordination polymers, can also be achieved in the context of covalent‐bond formation.     

Mono‐, Di‐, or Triazidated Cyclodextrin‐Based Polyrotaxanes for Facile and Efficient Functionalization via Click Chemistry

As a feasible way for controlling the density of ligands in polyrotaxanes, azidated polyrotaxanes comprising PEG (MW = 3 000 and 20 000 g · mol⁻¹) and mono‐, di‐, or triazidated α‐cyclodextrins are prepared in a water/DMSO solution in a one‐pot synthesis. The azidated polyrotaxanes are then allowed to conjugate with propargyl‐modified mannose as a ligand via click chemistry. As proven by FTIR spectroscopy and ¹H NMR‐spectroscopy, mannose molecules are efficiently introduced into all of the azide moieties of the polyrotaxanes. The results verify the achievement of ligand‐density‐controlled polyrotaxanes. The functionalized polyrotaxanes can be utilized for a variety of biological applications.

     

An Efficient Approach to the Synthesis of Hydrazinyl Pseudo‐Peptides

New hydrazinyl pseudo‐peptides have been obtained from Ugi four‐component reaction (4CR). The 5‐hydrazinyl‐5‐oxopentanoic acids used as starting materials were prepared by the reaction of hydrazides with anhydrides. Mild reaction conditions, high atom economy, bond‐forming efficiency, and easy workup are advantages of this approach. The products have four amide bonds and high potential for H‐bonding.     

An Organocatalytic Azide–Aldehyde [3+2] Cycloaddition: High‐Yielding Regioselective Synthesis of 1,4‐Disubstituted 1,2,3‐Triazoles

An organocatalytic azide–aldehyde [3+2] cycloaddition (organo‐click) reaction of a variety of enolizable aldehydes is reported. The organo‐click reaction is characterized by a high rate and regioselectivity, mild reaction conditions, easily available substrates with simple operation, and excellent yields with a broad spectrum of substrates. It constitutes an alternative to the previously known CuAAC, RuAAC, and IrAAC click reactions.     

CuAAC Click Reactions in the Gas Phase: Unveiling the Reactivity of Bis‐Copper Intermediates

Copper‐catalysed azide alkyne cycloaddition (CuAAC) has been considered a breakthrough transformation over the last 15 years. Its debated mechanism arouses continuously growing interest. By means of a mass spectrometer modified ad hoc, the entire catalytic cycle of CuAAC reaction has been investigated in the gas phase. Ion‐molecule reactions were performed inside the mass spectrometer to reproduce step‐by‐step, at a molecular level, the complete catalytic cycle of the click reaction. We successfully challenged the reactivity of elusive mono‐ and bis‐copper intermediates by ion‐molecule reactions leading to the production of mass‐characterized triazole products, paving the way for detailed energetic studies to be performed in the gas phase. The structures of the relevant species, calculated at a DFT level, helped rationalise our experimental results.     

An Efficient Copper‐Catalyzed One‐Pot Synthesis of 1‐Aryl‐1,2,3‐triazoles from Arylboronic Acids in Water under Mild Conditions

A convenient method for one‐pot two‐step 1,3‐dipolar cycloadditon reaction of arylboronic acid, sodium azide followed with terminal alkynes in the presence of 2‐pyrrolecarbaldiminato‐Cu(II) complexes catalyst is reported. Various 1‐aryl‐1,2,3‐triazoles were prepared in 63%–97% yields in water at 30°C without any additives and avoiding the isolation of unstable aryl azides.     

The Reaction of (N‐Isocyanimino)triphenylphosphorane with Biacetyl in the Presence of Aromatic Carboxylic Acids: Efficient One‐Pot Three‐Component Reaction for the Synthesis of 3‐(5‐Aryl‐1,3,4‐oxadiazol‐2‐yl)‐3‐hydroxybutan‐2‐one Derivatives

Reactions of biacetyl (=butane‐2,3‐dione) with (N‐isocyanimino)triphenylphosphorane in the presence of aromatic carboxylic acids proceed smoothly at room temperature and under neutral conditions to afford 3‐(5‐aryl‐1,3,4‐oxadiazol‐2‐yl)‐3‐hydroxybutan‐2‐one derivatives in high yields.