Molecular Engineering of Push–Pull Porphyrin Dyes for Highly Efficient Dye‐Sensitized Solar Cells: The Role of Benzene Spacers

Porphyrins have drawn much attention as sensitizers owing to the large absorption coefficients of their Soret and Q bands in the visible region. In a donor and acceptor zinc porphyrin we applied a new strategy of introducing 2,1,3‐benzothiadiazole (BTD) as a π‐conjugated linker between the anchoring group and the porphyrin chromophore to broaden the absorption spectra to fill the valley between the Soret and Q bands. With this novel approach, we observed 12.75 % power‐conversion efficiency under simulated one‐sun illumination (AM1.5G, 100 mW cm^?2). In this study, we showed the importance of introducing the phenyl group as a spacer between the BTD and the zinc porphyrin in achieving high power‐conversion efficiencies. Time‐resolved fluorescence, transient‐photocurrent‐decay, and transient‐photovoltage‐decay measurements were employed to determine the electron‐injection dynamics and the lifetime of the photogenerated charge carriers.     

β‐Functionalized Push–Pull opp‐Dibenzoporphyrins as Sensitizers for Dye‐Sensitized Solar Cells

A novel class of β‐functionalized push–pull zinc opp ‐dibenzoporphyrins were designed, synthesized, and utilized as sensitizers for dye‐sensitized solar cells. Spectral, electrochemical, and computational studies were systematically performed to evaluate their spectral coverage, redox behavior, and electronic structures. These porphyrins displayed much broader spectral coverage and more facile oxidation upon extension of the π conjugation. Free‐energy calculations and femtosecond transient absorption studies (charge injection rate in the range of 10¹¹ s⁻¹) suggested efficient charge injection from the excited singlet state of the porphyrin to the conduction band of TiO₂. The power conversion efficiency (η ) of YH3 bearing acrylic acid linkers (η =5.9 %) was close to that of the best ruthenium dye N719 (η =7.4 %) under similar conditions. The superior photovoltaic performance of YH3 was attributed to its higher light‐harvesting ability and more favorable electron injection and collection, as supported by electrochemical impedance spectral studies. This work demonstrates the exceptional potential of benzoporphyrins as sensitizers for dye‐sensitized solar cells.     

Zinc Porphyrins with a Pyridine‐Ring‐Anchoring Group for Dye‐Sensitized Solar Cells

Anchoring groups are extremely important in controlling the performance of dye‐sensitized solar cells (DSCs). The design and characterization of sensitizers with new anchoring groups, in particular non‐carboxylic acid groups, has become a recent focus of DSC research. Herein, new donor? π? acceptor zinc? porphyrin dyes with a pyridine ring as an anchoring group have been designed and synthesized for applications in DSCs. Photophysical and electrochemical investigations demonstrated that the pyridine ring worked effectively as an anchoring group for the porphyrin sensitizers. DSCs that were based on these new porphyrins showed an overall power‐conversion efficiency of about 4.0 % under full sunlight (AM 1.5G, 100 mW cm^?2).     

Peripherally and Axially Carboxylic Acid Substituted Subphthalocyanines for Dye‐Sensitized Solar Cells

A series of subphthalocyanines (SubPcs) bearing a carboxylic acid group either at the peripheral or axial position have been designed and synthesized to investigate the influence of the COOH group positions on the dye‐sensitized solar cell (DSSC) performance. The DSSC devices based on SubPcs with axially substituted carboxylic acid groups showed low photovoltaic performance, whereas peripherally substituted one exhibited higher power conversion efficiency owing to improved injection from LUMO of SubPcs to the TiO₂ conduction band.     

Recent Developments in Dye‐Sensitized Solar Cells

The knowledge of dye‐sensitized solar cells (DSCs) has expanded considerably in recent years. They are multiparameter and complex systems that work only if various parameters are tuned simultaneously. This makes it difficult to target to a single parameter to improve the efficiency. There is a wealth of knowledge concerning different DSC structures and characteristics. In this review, the present knowledge and recent achievements are surveyed with emphasis on the more promising cell materials and designs.     

Tailor‐Made Hole‐Conducting Coadsorbents for Highly Efficient Organic Dye‐Sensitized Solar Cells

The Y‐shaped, low molecular mass, hole‐conductor (HC), acidic coadsorbents 4‐{3,7‐bis[4‐(2‐ethylhexyloxy)phenyl]‐10H‐phenothiazin‐10‐yl}benzoic acid ( PTZ1 ) and 4‐{3,7‐bis[4‐(2‐ethylhexyloxy)phenyl]‐10H‐phenothiazin‐10‐yl}biphenyl‐4‐carboxylic acid ( PTZ2 ) were developed. Owing to their tuned and negative‐shifted HOMO levels (vs. NHE), they were used as HC coadsorbents in dye‐sensitized solar cells (DSSCs) to improve cell performance through desired cascade‐type hole‐transfer processes. Their detailed functions as HC coadsorbents in DSSCs were investigated to obtain evidence for the desired cascade‐type hole‐transfer processes. They have multiple functions, such as preventing π–π stacking of dye molecules, harvesting light of shorter wavelengths, and faster dye regeneration. By using PTZ2 as the tailor‐made HC coadsorbent on the TiO₂ surface with the organic dye NKX2677, an extremely high conversion efficiency of 8.95 % was achieved under 100 mW cm^?2 AM 1.5G simulated light (short‐circuit current J_SC=16.56 mA cm^?2, open‐circuit voltage V_OC=740 mV, and fill factor of 73 %). Moreover, J_SC was increased by 13 %, V_OC by 27 % and power‐conversion efficiency by 49 % in comparison to an NKX2677‐based DSSC without an HC coadsorbent. This is due to the HC coadsorbent having a HOMO energy level well matched to that of the NKX‐2677 dye to induce the desired cascade‐type hole‐transfer processes, which are associated with a slower charge recombination, fast dye regeneration, effective screening of liquid electrolytes, and an induced negative shift of the quasi‐Fermi level of the electrode. Thus, this new class of Y‐shaped, low molecular weight, organic, HC coadsorbents based on phenothiazine carboxylic acid derivatives hold promise for highly efficient organic DSSCs.     

Tropolone as a High‐Performance Robust Anchoring Group for Dye‐Sensitized Solar Cells

A tropolone group has been employed for the first time as an anchoring group for dye‐sensitized solar cells (DSSCs). The DSSC based on a porphyrin, YD2‐o‐C8T, with a tropolone moiety exhibited a power‐conversion efficiency of 7.7 %, which is only slightly lower than that observed for a reference porphyrin, YD2‐o‐C8 , with a conventional carboxylic group. More importantly, YD2‐o‐C8T was found to be superior to YD2‐o‐C8 with respect to DSSC durability and binding ability to TiO₂. These results unambiguously demonstrate that tropolone is a highly promising dye‐anchoring group for DSSCs in terms of device durability as well as photovoltaic performance.     

Benzoporphyrins: Selective Co‐sensitization in Dye‐Sensitized Solar Cells

A novel class of dyes, namely benzoporphyrins, was synthesized and implemented into dye‐sensitized solar cells. They feature complementary absorptions compared to N719 , which renders them promising candidates for co‐sensitization in DSSCs. Notably, metallated benzoporphyrins reveal a TiO₂–nanoparticle attachment that is size and aggregation dependent. Therefore, unproductive energy‐transfer events between the selectively attached dyes can be prevented. In light of the latter, an efficiency improvement of 39 % has been achieved upon selective adsorption of benzoporphyrins and N719 onto different layers of TiO₂ photoelectrode.     

New Organic Dye Based on a 3,6‐Disubstituted Carbazole Donor for Efficient Dye‐Sensitized Solar Cells

We have synthesized and characterized four organic dyes ( 9 , 10 , H1 , H2 ) based on a 3,6‐disubstituted carbazole donor as sensitizers in dye‐sensitized solar cells. These dyes have high molar extinction coefficients and energy levels suitable for electron transfer from an electrolyte to nanocrystalline TiO₂ particles. Under standard air mass 1.5 global (AM 1.5 G) solar irradiation, a device using dye H4 exhibits a short‐circuit current density (J_sc) of 13.7 mA cm^?2, an open‐circuit voltage (V_oc) of 0.68 V, a fill factor (FF) of 0.70, and a calculated efficiency of 6.52 %. This performance is comparable to that of a reference cell based on N719 (7.30 %) under the same conditions. After 1000 hours of visible‐light soaking at 60 °C, the overall efficiency remained at 95 % of the initial value.     

A Highly Conjugated Benzimidazole Carbene‐Based Ruthenium Sensitizer for Dye‐Sensitized Solar Cells

A new type of carbene‐based ruthenium sensitizer, CB104, with a highly conjugated ancillary ligand, diphenylvinylthiophene‐substituted benzimidazolepyridine, was designed and developed for dye‐sensitized solar cell applications. The influence of the thiophene antenna on the performance of the cell anchored with CB104 was investigated. Compared with the dye CBTR, the conjugated thiophene in the ancillary ligand of CB104 enhanced the molar extinction coefficient of the intraligand π–π* transition and the intensity of the lower energy metal‐to‐ligand charge‐transfer band. However, the incident photon‐to‐current conversion efficiency spectrum of the cell anchored with CB104 (0.15 mM ) showed a maximum of 63 % at 420 nm. The cell sensitized with the dye CB104 attained a power conversion efficiency of 7.30 %, which was lower than that of the cell with nonconjugated sensitizer CBTR (8.92 %) under the same fabrication conditions. The variation in the performance of these two dyes demonstrated that elongating the conjugated light‐harvesting antenna resulted in the reduction of short‐circuit photocurrent density, which might have been due to the aggregation of dye molecules. In the presence of a coabsorbate, chenodeoxycholic acid, the CB104‐sensitized cell exhibited an enhanced photocurrent density and achieved a photovoltaic efficiency of 8.36 %.     

TiO2 Nanotubes in Dye‐Sensitized Solar Cells: Critical Factors for the Conversion Efficiency

Particle vs tube : The present paper systematically investigates a range of fundamental geometrical and structural features of TiO₂ nanotube layers and their effect on the dye‐sensitized solar cell conversion efficiency, to deduce the most promising strategies for improvement. It is found that the performance of the cells strongly depends on the morphology and crystalline structure of the nanotubes.

     

Thieno[3,4‐b]thiophene‐Based Organic Dyes for Dye‐Sensitized Solar Cells

New dipolar sensitizers containing an ethyl thieno[3,4‐b]thiophene‐2‐carboxylate (ETTC) entity in the conjugated spacer have been synthesized in two isomeric forms. These compounds were used as the sensitizers of n‐type dye‐sensitized solar cells (DSSCs). The best conversion efficiency (5.31 %) reaches approximately 70 % of the N719‐based (7.41 %) DSSC fabricated and measured under similar conditions. The ETTC‐containing compounds exhibit a bathochromic shift of the absorption compared to their thiophene congeners due to the quinoid effect, however, charge‐trapping at the ester group of ETTC was found to jeopardize the electron injection and lower the cell efficiency. Charge trapping is alleviated as the ester group of ETTC is replaced with a hydrogen atom, as evidenced from the theoretical computation.     

Enhancing the Performance of Dye‐Sensitized Solar Cells with a Gold‐Nanoflowers Box

To improve the electron collection, electron lifetime, and light‐harvesting efficiency of dye‐sensitized solar cells simultaneously, Au nanoflowers were prepared and used to cover the entire TiO₂ film. Deposition of Au nanoflowers around the TiO₂ film formed a light‐scattering “box” that covered the entire TiO₂ film. Compared with a light‐scattering layer that only covers the top surface of TiO₂, the Au‐nanoflowers box exhibited better light‐harvesting efficiency due to omnidirectional light scattering, faster electron transport (attributed to the formation of electron channels between the metallic Au nanoflowers and the electron‐collection electrode), and slower charge recombination. As a consequence, the short‐circuit photocurrent and open‐circuit photovoltage were both enhanced significantly, which improved the power conversion efficiency from 8.12 to 10.91 % (34 %) when an Au‐nanoflowers box was wrapped around the photoanode.     

Ultrafast Photodynamics of the Indoline Dye D149 Adsorbed to Porous ZnO in Dye‐Sensitized Solar Cells

We investigate the ultrafast dynamics of the photoinduced electron transfer between surface‐adsorbed indoline D149 dye and porous ZnO as used in the working electrodes of dye‐sensitized solar cells. Transient absorption spectroscopy was conducted on the dye in solution, on solid state samples and for the latter in contact to a I^?/I₃^? redox electrolyte typical for dye‐sensitized solar cells to elucidate the effect of each component in the observed dynamics. D149 in a solution of 1:1 acetonitrile and tert‐butyl alcohol shows excited‐state lifetimes of 300±50 ps. This signature is severely quenched when D149 is adsorbed to ZnO, with the fastest component of the decay trace measured at 150±20 fs due to the charge‐transfer mechanism. Absorption bands of the oxidized dye molecule were investigated to determine regeneration times which are in excess of 1 ns. The addition of the redox electrolyte to the system results in faster regeneration times, of the order of 1 ns.