Luminescence Tuning and White‐Light Emission of Co‐doped Ln–Cd–Organic Frameworks

Four new three‐dimensional isostructural lanthanide–cadmium metal–organic frameworks (Ln–Cd MOFs), [LnCd₂(imdc)₂(Ac)(H₂O)₂]?H₂O (Ln=Pr ( 1 ), Eu ( 2 ), Gd ( 3 ), and Tb ( 4 ); H₃imdc=4,5‐imidazoledicarboxylic acid; Ac=acetate), have been synthesized under hydrothermal conditions and characterized by IR, elemental analyses, inductively coupled plasma (ICP) analysis, and X‐ray diffraction. Single‐crystal X‐ray diffraction shows that two Ln^III ions are surrounded by four Cd^II ions to form a heteronuclear building block. The blocks are further linked to form 3D Ln–Cd MOFs by the bridging imdc^3? ligand. Furthermore, the left‐ and right‐handed helices array alternatively in the lattice. Eu–Cd and Tb–Cd MOFs can emit characteristic red light with the Eu^III ion and green light with the Tb^III ion, respectively, while both Gd–Cd and Pr–Cd MOFs generate blue emission when they are excited. Different concentrations of Eu³⁺ and Tb³⁺ ions were co‐doped into Gd–Cd/Pr–Cd MOFs, and tunable luminescence from yellow to white was achieved. White‐light emission was obtained successfully by adjusting the excitation wavelength or the co‐doping ratio of the co‐doped Gd–Cd and Pr–Cd MOFs. These results show that the relative emission intensity of white light for Gd–Cd:Eu³⁺,Tb³⁺ MOFs is stronger than that of Pr–Cd:Eu³⁺,Tb³⁺ MOFs, which implies that the Gd complex is a better matrix than the Pr complex to obtain white‐light emission materials.     

Luminescence Properties of Ca2Ga2SiO7:RE Phosphors for UV White‐Light‐Emitting Diodes

A series of Eu²⁺‐, Ce³⁺‐, and Tb³⁺‐doped Ca₂Ga₂SiO₇ phosphors is synthesized by using a high‐temperature solid‐state reaction. The powder X‐ray diffraction and structure refinement data indicate that our prepared phosphors are single phased and the phosphor crystalizes in a tetrahedral system with the ${P\bar 42m}$ (113) space group. The Eu²⁺‐ and Ce³⁺‐doped phosphors both have broad excitation bands, which match well with the UV light‐emitting diodes chips. Under irradiation of λ=350 nm, Ca₂Ga₂SiO₇:Eu²⁺ and Ca₂Ga₂SiO₇:Ce³⁺, Li⁺ have green and blue emissions, respectively. Luminescence of Ca₂Ga₂SiO₇:Tb³⁺, Li⁺ phosphor varies with the different Tb³⁺ contents. The thermal stability and energy‐migration mechanism of Ca₂Ga₂SiO₇:Eu²⁺ are also studied. The investigation results indicate that the prepared Ca₂Ga₂SiO₇:Eu²⁺ and Ca₂Ga₂SiO₇:Ce³⁺, Li⁺ samples show potential as green and blue phosphors, respectively, for UV‐excited white‐light‐emitting diodes.     

2,2′‐Bipyrimidine as Efficient Sensitizer of the Solid‐State Luminescence of Lanthanide and Uranyl Ions from Visible to Near‐Infrared

Treatment of Ln(NO₃)₃?nH₂O with 1 or 2 equiv 2,2′‐bipyrimidine (BPM) in dry THF readily afforded the monometallic complexes [Ln(NO₃)₃(bpm)₂] (Ln=Eu, Gd, Dy, Tm) or [Ln(NO₃)₃(bpm)₂]?THF (Ln=Eu, Tb, Er, Yb) after recrystallization from MeOH or THF, respectively. Reactions with nitrate salts of the larger lanthanide ions (Ln=Ce, Nd, Sm) yielded one of two distinct monometallic complexes, depending on the recrystallization solvent: [Ln(NO₃)₃(bpm)₂]?THF (Ln=Nd, Sm) from THF, or [Ln(NO₃)₃(bpm)(MeOH)₂]?MeOH (Ln=Ce, Nd, Sm) from MeOH. Treatment of UO₂(NO₃)₂?6H₂O with 1 equiv BPM in THF afforded the monoadduct [UO₂(NO₃)₂(bpm)] after recrystallization from MeOH. The complexes were characterized by their crystal structure. Solid‐state luminescence measurements on these monometallic complexes showed that BPM is an efficient sensitizer of the luminescence of both the lanthanide and the uranyl ions emitting visible light, as well as of the Yb^III ion emitting in the near‐IR. For Tb, Dy, Eu, and Yb complexes, energy transfer was quite efficient, resulting in quantum yields of 80.0, 5.1, 70.0, and 0.8 %, respectively. All these complexes in the solid state were stable in air.     

Eu2+ & Mn2+‐Coactivated Ba3Gd(PO4)3 Orange‐Yellow‐Emitting Phosphor with Tunable Color Tone for UV‐Excited White LEDs

A novel orange‐yellow‐emitting Ba₃Gd(PO₄)₃:x Eu²⁺,y Mn²⁺ phosphor is prepared by high‐temperature solid‐state reaction. The crystal structure of Ba₃Gd(PO₄)₃:0.005 Eu²⁺,0.04 Mn²⁺ is determined by Rietveld refinement analysis on powder X‐ray diffraction data, which shows that the cations are disordered on a single crystallographic site and the oxygen atoms are distributed over two partially occupied sites. The photoluminescence excitation spectra show that the developed phosphor has an efficient broad absorption band ranging from 230 to 420 nm, perfectly matching the characteristic emission of UV‐light emitting diode (LED) chips. The emission spectra show that the obtained phosphors possess tunable color emissions from yellowish‐green through yellow and ultimately to reddish‐orange by simply adjusting the Mn²⁺ content (y) in Ba₃Gd(PO₄)₃:0.005 Eu²⁺,y Mn²⁺ host. The tunable color emissions origin from the change in intensity between the 4f–5d transitions in the Eu²⁺ ions and the ⁴T₁‐⁶A₁ transitions of the Mn²⁺ ions through the energy transfer from the Eu²⁺ to the Mn²⁺ ions. In addition, the mechanism of the energy transfer between the Eu²⁺ and Mn²⁺ ions are also studied in terms of the Inokuti–Hirayama theoretical model. The present results indicate that this novel orange‐yellow‐emitting phosphor can be used as a potential candidate for the application in white LEDs.     

Bright White‐Light Emission from a Single Organic Compound in the Solid State

White‐light‐emitting materials and devices have attracted enormous interest because of their great potential for various lighting applications. We herein describe the light‐emitting properties of a series of new difunctional organic molecules of remarkably simple structure consisting of two terminal 4‐pyridone push–pull subunits separated by a polymethylene chain. They were found to emit almost “pure” white light as a single organic compound in the solid state, as well as when incorporated in a polymer film. To the best of our knowledge, they are the simplest white‐light‐emitting organic molecules reported to date.     

Single‐Crystal‐to‐Single‐Crystal Transformation and Solvochromic Luminescence of a Dinuclear Gold(I)–(Aza‐[18]crown‐6)dithiocarbamate Compound

The treatment of [AuCl(SMe₂)] with an equimolar amount of NaO₅NCS₂ (O₅NCS₂=(aza‐[18]crown‐6)dithiocarbamate) in CH₃CN gave [Au₂(O₅NCS₂)₂] ? 2 CH₃CN ( 2? 2 CH₃CN), and its crystal structure displays a dinuclear gold(I)‐azacrown ether ring and an intermolecular gold(I) ??? gold(I) contact of 2.8355(3) Å in crystal lattices. It is noted that two other single crystals of 2 ?tert‐butylbenzene?H₂O and 2? 0.5 m‐xylene can be successfully obtained from a single‐crystal‐to‐single‐crystal (SCSC) transformation process by immersing single crystals of 2? 2 CH₃CN in the respective solvents, and both also show intermolecular gold(I) ??? gold(I) contacts of 2.9420(5) and 2.890(2)–2.902(2) Å, respectively. Significantly, the emissions of all three 2 ?solvates are well correlated with their respective intermolecular gold(I) ??? gold(I) contacts, where such contacts increase with 2? 2 CH₃CN (2.8355(3) Å)< 2? 0.5 m‐xylene (2.890(2)–2.902(2) Å)< 2? tert‐butylbenzene?H₂O (2.9420(5) Å), and their emission energies increase with 2? 2 CH₃CN (602 nm)< 2? 0.5 m‐xylene (583 nm)< 2? tert‐butylbenzene?H₂O (546 nm) as well. In this regard, we further examine the solvochromic luminescence for some other aromatics, and finally their emissions are within 546–602 nm. Obviously, the above results are mostly ascribed to the occurrence of intermolecular gold(I) ??? gold(I) contacts in 2 ?solvates, which are induced by the presence of various solvates in the solid state, as a key role to be responsible for their solvochromic luminescence.     

Mechanochromic Luminescence Characteristics of Pyridine‐Terminated Chromophores in the Solid State and in a Poly(vinyl alcohol) Matrix

Mechanoresponsive luminophores containing different substituted pyridine rings at the molecular terminus are synthesized and their photoluminescence properties are investigated. The solid chromophore with a 4‐substituted pyridine ring exhibits a reversible photoluminescent color change, while the 2‐substituted chromophore shows only a small change in luminescence, and the 3‐substituted chromophore displays an irreversible photoluminescent color change with mechanical grinding. A change of the sample color in response to mechanical grinding is also achieved for a dye‐dispersed poly(vinyl alcohol) film. Furthermore, a simultaneous acid and mechanoresponsive photoemission color change is achieved in the dye‐dispersed film.     

Aptamer‐Based Luminescence Energy Transfer from Near‐Infrared‐to‐Near‐Infrared Upconverting Nanoparticles to Gold Nanorods and Its Application for the Detection of Thrombin

A new luminescence energy transfer (LET) system has been designed for the detection of thrombin in the near‐infrared (NIR) region by utilizing NIR‐to‐NIR upconversion lanthanide nanophosphors (UCNPs) as the donor and gold nanorods (Au NRs) as the acceptor. The use of upconverting NaYF₄:Yb³⁺,Tm³⁺ nanoparticles with sharp NIR emission peaks upon NIR excitation by an inexpensive infrared continuous wave laser diode provided large spectral overlap between the donor and the acceptor. Both the Au NRs and carboxyl‐terminated NaYF₄:Yb³⁺,Tm³⁺ UCNPs were first modified with different thrombin aptamers. When thrombin was added, a LET system was then formed because of the specific recognition between the thrombin aptamers and thrombin. The LET system was used to monitor thrombin concentrations in aqueous buffer and human blood samples. The limits of detection for thrombin are as low as 0.118 nM in buffer solution and 0.129 nM in human serum. The method was also successfully applied to thrombin detection in blood samples.     

Pentacoordinate Phosphorus in a High‐Pressure Polymorph of Phosphorus Nitride Imide P4N6(NH)

Coordination numbers higher than usual are often associated with superior mechanical properties. In this contribution we report on the synthesis of the high‐pressure polymorph of highly condensed phosphorus nitride imide P₄N₆(NH) representing a new framework topology. This is the first example of phosphorus in trigonal‐bipyramidal coordination being observed in an inorganic network structure. We were able to obtain single crystals and bulk samples of the compound employing the multi‐anvil technique. γ‐P₄N₆(NH) has been thoroughly characterized using X‐ray diffraction, solid‐state NMR and FTIR spectroscopy. The synthesis of γ‐P₄N₆(NH) gives new insights into the coordination chemistry of phosphorus at high pressures. The synthesis of further high‐pressure phases with higher coordination numbers exhibiting intriguing physical properties seems within reach.     

Synthesis of Subnanometer‐Sized Gold Clusters by a Simple Milling‐Mediated Solid Reduction Method

An effective solvent‐free method based on a solid‐reduction process was developed to fabricate ultrafine gold catalysts. By this method we revealed a strong size‐dependent activity of Au species in which subnanometer‐sized clusters exhibited the best activity in the hydrogenation of CO₂ to formate, with a turnover number of up to 9278 over 7 h at 90 °C.     

Exceptionally Long‐Lived Luminescence Emitted from TbIII Ion Caged in an AgI–TbIII–Thiacalix[4]arene Supramolecular Complex in Water

The compositions and photophysical properties of luminescent ternary complexes of thiacalix[4]arene‐p‐sulfonate (TCAS), Tb^III, and Ag^I ions were determined. At pH 6, Ag^I₂?Tb^III₂?TCAS₂ formed. Moreover, at pH 10, in the presence of a 20‐fold excess of Ag^I and a 50‐fold excess of TCAS with respect to Tb^III, Ag^I₂?Tb^III?TCAS₂ formed as the main luminescent species. The structure of these complexes was proposed: two TCAS ligands are linked by two S–Ag^I–S linkages to adopt a double‐cone supramolecular structure. Furthermore, each Tb^III ion in the former complex accepts O^?, S, O^? donation, whereas in the latter, the Tb^III center accepts eightfold O^? donation. The luminescence quantum yield (Φ) of Ag^I₂?Tb^III₂?TCAS₂ (0.16) was almost equal to that of Tb^III?TCAS, but the luminescence lifetime τ of the former (=1.09 ms) was larger than that of the latter. For Ag^I₂?Tb^III?TCAS₂, the yield Φ (=0.11) was small, which is attributed to the low efficiency of photosensitization (η=0.11). However, the τ value (4.61 ms) was exceptionally large and almost equal to the natural luminescence lifetime of Tb^III (4.7 ms), which is due to the absence of coordinating water molecules (q=0.1). This is compatible with the proposed structure in which the Tb^III ion is shielded by a supramolecular cage that expels coordinated water molecules responsible for luminescence quenching.     

The Gold(I)‐Catalysed Protodecarboxylation Mechanism

A mechanistic study of the gold‐catalysed protodecarboxylation is described. Each reaction step has been investigated experimentally and computationally. More specifically, the activation parameters for the decarboxylation step have been determined through kinetic studies. Further experimental studies on the hydrolysis of the arylgold intermediate have revealed that the protodeauration can become competitive with the decarboxylation process at high conversions. This switch in rate‐limiting step has been shown to be pK_a‐dependent. These studies have been supported by DFT calculations and permit a better understanding of which prevalent features of the reaction mechanism account for the decarboxylation process.