From Homoconjugated Push–Pull Chromophores to Donor–Acceptor‐Substituted Spiro Systems by Thermal Rearrangement

Series of homoconjugated push–pull chromophores and donor–acceptor (D–A)‐functionalized spiro compounds were synthesized, in which the electron‐donating strength of the anilino donor groups was systematically varied. The structural and optoelectronic properties of the compounds were investigated by X‐ray analysis, UV/Vis spectroscopy, electrochemistry, and computational analysis. The homoconjugated push–pull chromophores with a central bicyclo[4.2.0]octane scaffold were obtained in high yield by [2+2] cycloaddition of 2,3‐dichloro‐5,6‐dicyano‐p‐benzoquinone (DDQ) to N,N‐dialkylanilino‐ or N,N‐diarylanilino‐substituted activated alkynes. The spirocyclic compounds were formed by thermal rearrangement of the homoconjugated adducts. They also can be prepared in a one‐pot reaction starting from DDQ and anilino‐substituted alkynes. Spiro products with N,N‐diphenylanilino and N,N‐diisopropylanilino groups were isolated in high yields whereas compounds with pyrrolidino, didodecylamino, and dimethylamino substituents gave poor yields, with formation of insoluble side products. It was shown by in situ trapping experiments with TCNE that cycloreversion is possible during the thermal rearrangement, thereby liberating DDQ. In the low‐yielding transformations, DDQ oxidizes the anilino species present, presumably via an intermediate iminium ion pathway. Such a pathway is not available for the N,N‐diphenylanilino derivative and, in the case of the N,N‐diisopropylanilino derivative, would generate a strained iminium ion (A1,3 strain). The mechanism of the thermal rearrangement was investigated by EPR spectroscopy, which provides good evidence for a proposed biradical pathway starting with the homolytic cleavage of the most strained (CN)C?C(CN) bond between the fused four‐ and six‐membered rings in the homoconjugated adducts.     

Unprecedented Ring–Ring Interconversion of N,P,C‐Cage Ligands

The novel N,P,C‐cage complexes 5 a – f and 6 a – f have been obtained by the reaction of the P‐pentamethylcyclopentadienylphosphinidene complex 2 , generated thermally from 2H‐azaphosphirene complex 1 , with N‐methyl‐C‐arylcarbaldimines 3 a – f . Li/Cl phosphinidenoid complex 8 reacted with 3 a , b to give N,P,C‐cage complexes 6 a , b , whereas with 3 c – f , complexes 6 c – f were obtained in negligible amounts only. Both types of ligand N,P,C‐cage structures 5 and 6 were found to be in an unprecedented equilibrium, with 5 a , f as the predominant species. Transient electrophilic terminal phosphinidene complexes 10 a – f serve as intermediates in both ligand interconversions ( 5 a , f ? 6 a , f ), as evidenced through trapping reactions with phenylacetylene and N‐methyl‐C‐phenylcarbaldimine, thus leading to the novel N,P,C‐cage complexes 13 b and 15 . DFT calculations predicted a small difference in the relative energies of the two types of N,P,C‐cage ligands, and a remarkable stabilisation of the aminophosphinidene complex 10 as the common precursor, thereby providing an insight into this surprising 5‐ring–3‐ring interconversion. In depth analysis of intermediate 10 revealed the occurrence of both through‐bond (conventional inductive/mesomeric effects) and through‐space (non‐covalent interactions) mechanisms, which amount to 67.8 and 14.4 kcal mol^?1, respectively, and account for the remarkable stabilisation of this intermediate.     

From Linear to T‐Shaped Indan‐1,3‐dione Push–Pull Molecules: A Comparative Study

A series of indan‐1,3‐dione‐based linear, quadrupolar and T‐shaped push–pull chromophores have been designed and synthesized by the Knoevenagel condensation and Pd‐catalyzed Suzuki–Miyaura or Sonogashira cross‐coupling reactions. The number and position of the peripheral donor branches attached to the central withdrawing indan‐1,3‐dione moiety have been varied jointly with the type of π‐linker used in order to modulate fundamental optoelectronic properties. The molecular structure of two chromophores has been confirmed by X‐ray analysis. The thermal and optoelectronic properties have further been investigated by differential scanning calorimetry, electrochemistry, UV/Vis absorption spectroscopy, and DFT calculations. Based on these experimental and theoretical data, thorough structure–property relationships have been further evaluated and influence of the particular structural modification on chromophore properties has been discussed.     

Novel π‐Electron Extension System via Chromophores Self‐Polymerization to Enhance the NLO Efficiency

A new strategy for the self‐polymerization of chromophores is investigated to develop a 2,7‐carbazole‐based nonlinear optical (NLO) conjugated polymer with an increasing conjugation length of chromophores. Elongation of the conjugation‐path length in chromophores has established engineering guidelines to enhance optical nonlinearity. Compared with the traditional synthesis of an NLO polymer, the chromophores should be well‐designed at a limited conjugation spacer, and then incorporated into a polymer matrix. In this research, the π‐conjugation spacer of chromophores extended perpendicularly to the dipole of chromophores during the polymerization process. Furthermore, this study marks the first research of integrating the π‐electrons of chromophores and conjugated polymers. These conjugated backbones promote a bulk‐polarization response, leading to large NLO coefficients.

     

One donor–two acceptor (D–A1)‐(D–A2) random terpolymers containing perylene diimide,naphthalene diimide,and carbazole units

A series of one donor–two acceptor (D–A₁)‐(D–A₂) random terpolymers containing a 2,7‐carbazole donor and varying compositions of perylene diimide (PDI) and naphthalene diimide (NDI) acceptors was synthesized via Suzuki coupling polymerization. The optical properties of the terpolymers are weighted sums of the constituent parent copolymers and all show strong absorption over the 400 to 700 nm range with optical bandgaps ranging from 1.77 to 1.87 eV, depending on acceptor composition. The copolymers were tested as acceptor materials in bulk heterojunction all‐polymer solar cells using poly[(4,8‐bis‐(2‐ethylhexyloxy)‐benzo[1,2‐b;4,5‐b′]dithiophene)‐2,6‐diyl‐alt‐(4‐(2‐ethylhexanoyl)‐thieno[3,4‐b]thiophene)‐2,6‐diyl] (PBDTTT‐C) as the donor material. In contrast to the optoelectronic properties, the measured device parameters are not composition dependent, and rather depend solely on the presence of the NDI unit, where the devices containing any amount of NDI perform half as well as those using the parent polymer containing only carbazole and PDI. Overall this is the first example of a one donor–two acceptor random terpolymer system containing perylene diimide (PDI) and naphthalene diimide (NDI) acceptor units, and demonstrates a facile method of tuning polymer optoelectronic properties while minimizing the need for complicated synthetic and purification steps. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3337–3345     

Quantum chemical calculations of geometries and gas‐phase deprotonation energies of linear polyyne chains

The molecular geometries of polyyne chains H(CC)_nH with their deprotonated forms (anions) have been optimized using ab initio LCAO‐SCF molecular orbital (MO) method and density functional theory at different basis set levels. The polyynes possess a series of alternating single and triple bonds. On the theoretical side the persistence of bond alternation and the effect of chain lengthening on the individual bond length in linear conjugated polyyne chains has been investigated. The common conclusion has been drawn that the bond alternation will persist and that bond length variation will be small. The triple bond length increases progressively toward the asymptotic limits as the value of n increases progressively. If the split‐valence basis set was employed, the total charges obtained using the Mulliken population analysis yielded unrealistic values. Using natural bond orbital (NBO) analysis or Bader's analysis, the net charges of the individual atoms converge very rapidly to their asymptotic limits, and the central atoms have almost zero charges in contrast to the Mulliken population analysis results. The reliability of deprotonation energies of neutral polyynes and their monoanionic derivatives calculated from the differences in molecular energy of the parent chains and the corresponding anions E(H(CC)_n⁻)–E(H(CC)_nH) and E(⁻(CC)_n⁻)–E(H(CC)_n⁻) was tested for different basis sets. The increase of the number of CC bonds in the chain decreases these differences asymptotically. The studied compounds are the best available building blocks in bimetallic compounds with useful properties in molecular electronics and nonlinear optics. © 2001 John Wiley & Sons, Inc. Int J Quant Chem 82: 73–85, 2001     

Molecular design,synthesis, and nonlinear optical properties of novel T‐type polyimides with exceptionally high thermal stability of the second harmonic generation

2,5‐Bis‐(3,4‐dicarboxyphenylcarboxyethoxy)‐4′‐nitrostilbene dianhydride was prepared and reacted with 1,4‐phenylenediamine, 4,4′‐oxydianiline, 4,4′‐diaminobenzanilide, and 4,4′‐(hexafluoroisopropylidene)dianiline to yield unprecedented novel T‐type polyimides ( 4 – 7 ) containing 2,5‐dioxynitrostilbenyl groups as nonlinear optical chromophores, which constituted parts of the polymer backbones. 4 – 7 were soluble in polar solvents such as acetone and N,N‐dimethylformamide. They showed thermal stability up to 300 °C in thermogravimetric analysis thermograms; the glass‐transition temperatures obtained from differential scanning calorimetry thermograms were around 153 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films at the 1064‐cm^?1 fundamental wavelength were around 4.35 × 10^?9 esu. The dipole alignment exhibited exceptionally high thermal stability even at 45 °C higher than the glass‐transition temperature, and there was no SHG decay below 200 °C because of the partial main‐chain character of the polymer structure, which was acceptable for nonlinear optical device applications. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3189–3199, 2004     

Synthesis and solid‐state structures of t‐Bu3Ga–EPh3 Lewis acid–base adducts

Three Lewis acid–base adducts t‐Bu₃Ga–EPh₃ (E = P 1 , As 2 , Sb 3 ) were synthesized by reactions of Ph₃E and t‐Bu₃Ga and characterized by heteronuclear NMR (¹H, ¹³C (³¹P)) and IR spectroscopy, elemental analysis and single crystal X‐ray diffraction. Their structural parameters are discussed and compared to similar t‐Bu₃Ga adducts. The strength of the donor‐acceptor interactions within 1 – 3 was investigated in solution by temperature‐dependent ¹H NMR spectroscopy and by quantum chemical calculations.     

Geometry and bond‐length alternation in nonlinear optical materials. II. Effects of donor strength in two push–pull molecules

The compounds N‐[2‐(4‐cyano‐5‐dicyanomethylene‐2,2‐dimethyl‐2,5‐dihydrofuran‐3‐yl)vinyl]‐N‐phenylacetamide, C₂₀H₁₆N₄O₂,(I), and 2‐{3‐cyano‐5,5‐dimethyl‐4‐[2‐(piperidin‐1‐yl)vinyl]‐2,5‐dihydrofuran‐2‐ylidene}malononitrile 0.376‐hydrate, C₁₇H₁₈N₄O·0.376H₂O, (II), are novel push–pull molecules. The significant bonding changes in the polyene chain compared with the parent molecule 2‐dicyanomethylene‐4,5,5‐trimethyl‐2,5‐dihyrofuran‐3‐carbonitrile are consistent with the relative electron‐donating properties of the acetanilido and piperidine groups. The packing of (I) utilizes one phenyl–cyano C—H...N and two phenyl–carbonyl C—H...O hydrogen bonds. Compound (II) crystallizes with a partial water molecule (0.376H₂O), consistent with cell packing that is dominated by attractive C—H...N(cyano) interactions. These compounds are precursors to novel nonlinear optical chromophores, studied to assess the impact of donor strength and the extent of conjugation on bond‐length alternation, crystal packing and aggregation.     

Synthesis and Characterization of (–)‐Menthyl Containing N‐Alkyl Cycloimmonium Salts

The reaction of 4‐phenyl‐2‐aminothiazole or 2‐amino pyridine with α‐bromo acetic (–)‐menthyl ester ( 2c ) yields new N‐alkyl cycloimmonium bromides ( 1c , 3 ) with the chiral (–)‐menthyl substituent, which were isolated and fully characterized by ¹H and ¹³C NMR spectroscopy for the first time. In addition, starting from 4‐phenyl‐2‐aminothiazole, two further N‐alkyl cycloimmonium bromides ( 1a , 1b ) were prepared. The molecular and crystal structures of all three thiazole derived N‐alkyl cycloimmonium bromides ( 1a – c ) were determined by single‐crystal X‐ray diffraction. In all cases the crystal structures are dominated by N–H ··· Br hydrogen bonds, which results in the formation of an extensive hydrogen bonded network in the crystal. Interestingly, in all structures S ··· Br^– distances shorter than the sum of the van der Waals radii are observed.     

A tridentate CNO‐donor palladium(II) complex as efficient catalyst for direct C―H arylation: Application in preparation of imidazole‐based push–pull chromophores

A series of imidazolium chlorides for the formation of tridentate CNO‐donor palladium(II) complexes featuring N‐heterocyclic carbene moieties have been developed from cheap and readily available starting materials with high yields. Their palladium complexes were prepared by reactions between the ligand precursors and PdCl₂ using K₂CO₃ as base in pyridine with reasonable yields. These air‐stable metal complexes were characterized using ¹H NMR and ¹³C{¹H} NMR spectroscopy and elemental analyses. Heteronuclear multiple bond correlation experiments were performed to identify key NMR signals of these compounds. The structures of two of the complexes were also established by single‐crystal X‐ray diffraction analysis. One of these complexes was successfully applied in the direct C―H functionalization reactions between heterocyclic compounds and aryl bromides, producing excellent yields of coupled products. The coupling reactions were scalable, allowing grams of coupled products to be obtained with a mere 2 mol% of Pd loading. The catalyst system developed allowed the large‐scale preparation of several push–pull chromophores straightforwardly. Photophysical properties based on UV–visible and fluorescence spectroscopy for these chromophores were investigated. Deep blue photoluminescence with moderate quantum efficiency and twisted intramolecular charge transfer excited state were observed for these chromophores. Density functional theory (DFT) and time‐dependent DFT calculations were performed to support the experimental results.     

N‐Arylated 3,5‐Dihydro‐4H‐dinaphtho[2,1‐c:1′,2′‐e]azepines: Axially Chiral Donors with High Helical Twisting Powers for Nonplanar Push–Pull Chromophores

Axially chiral, N‐arylated 3,5‐dihydro‐4H‐dinaphtho[2,1‐c:1′,2′‐e]azepines have been prepared by short synthetic protocols from enantiopure 1,1′‐bi(2,2′‐naphthol) (BINOL) and anilines. Alkynes substituted with two N‐phenyldinaphthazepine donors readily undergo a formal [2+2] cycloaddition, followed by retro‐electrocyclization, with tetracyanoethene (TCNE) to yield donor‐substituted 1,1,4,4‐tetracyanobuta‐1,3‐dienes (TCBDs) featuring intense intramolecular charge‐transfer (CT) interactions. A dicyanovinyl derivative substituted with one N‐phenyldinaphthazepine donor was obtained by a “one‐pot” oxidation/Knoevenagel condensation from the corresponding propargylic alcohol. Comparative electrochemical, X‐ray crystallographic, and UV/Vis studies show that the electron‐donor qualities of N‐phenyldinaphthazepine are similar to those of N,N‐dimethylanilino residues. The circular dichroism (CD) spectrum of a push–pull chromophore incorporating the chiral donor moiety features Cotton effects of exceptional intensity. With their elongated shape and the rigidity of the chiral N‐aryldinaphthazepine donors, these chromophores are effective inducers of twist distortion in nematic liquid crystals (LCs). Thus, a series of the dinaphthazepine derivatives was used as dopants in the nematic LC E7 (Merck) and high helical twisting powers (β) of the order of hundreds of μm^?1 were measured. Theoretical calculations were employed to elucidate the relation between the structure of the dopants and their helical twisting power. For the derivatives with two dinaphthazepine moieties, a strong dependence of the β‐values on the structure and conformation of the linker between them was found.     

Aggregation‐Induced Emission and Sensing Characteristics of Triarylborane–Oligothiophene–Dicyanovinyl Triads

The design, synthesis and aggregation‐induced emission properties of a new series of triarylborane–oligothiophene–dicyanovinyl (DCV) conjugates 4 – 6 (A–D–A’ type molecular configuration) are reported. The optical properties of 4 – 6 can be modulated by judiciously varying the number of thiophene units between electron deficient boryl and dicyanovinyl units. Compound 6 with terthiophene spacer showed highly red‐shifted absorption and emission compared to 5 and 4 with bithiophene and monothiophene spacers, respectively. Compounds 5 and 6 show aggregation‐induced emission enhancement in water/THF mixtures. Compounds 5 and 6 also showed solvent viscosity dependent emission characteristics. All the three compounds show distinct optical responses for small anions such as fluoride and cyanide. Filter paper strips coated with compounds 5 and 6 can detect F^? and CN^? in aqueous media with different colorimetric responses.     

Beyond Donor–Acceptor (D–A) Approach: Structure–Optoelectronic Properties—Organic Photovoltaic Performance Correlation in New D–A1–D–A2 Low‐Bandgap Conjugated Polymers

Low‐bandgap near‐infrared polymers are usually synthesized using the common donor–acceptor (D–A) approach. However, recently polymer chemists are introducing more complex chemical concepts for better fine tuning of their optoelectronic properties. Usually these studies are limited to one or two polymer examples in each case study so far, though. In this study, the dependence of optoelectronic and macroscopic (device performance) properties in a series of six new D–A₁–D–A₂ low bandgap semiconducting polymers is reported for the first time. Correlation between the chemical structure of single‐component polymer films and their optoelectronic properties has been achieved in terms of absorption maxima, optical bandgap, ionization potential, and electron affinity. Preliminary organic photovoltaic results based on blends of the D–A₁–D–A₂ polymers as the electron donor mixed with the fullerene derivative [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester demonstrate power conversion efficiencies close to 4% with short‐circuit current densities (J _sc) of around 11 mA cm⁻², high fill factors up to 0.70, and high open‐circuit voltages (V _ocs) of 0.70 V. All the devices are fabricated in an inverted architecture with the photoactive layer processed in air with doctor blade technique, showing the compatibility with roll‐to‐roll large‐scale manufacturing processes.

     

Hydroacridines: Part 23. 1H and 13C NMR spectra of sym‐octahydroacridine,its 9‐(3‐pyridyl) and 9‐(4‐pyridyl) derivatives and the corresponding N(10)‐oxides. An experimental approach to the diamagnetic anisotropy of the pyridine nucleus

The complete ¹H NMR chemical shift assignments of 1,2,3,4,5,6,7,8‐octahydroacridine ( 1 ), 1,2,3,4,5,6,7,8‐octahydro‐9‐(3‐pyridyl)acridine ( 2 ), 1,2,3,4,5,6,7,8‐octahydro‐9‐(4‐pyridyl)acridine ( 3 ) and the corresponding N(10)‐oxides 1a , 2a and 3a , respectively, were achieved on the basis of 400 MHz ¹H NMR spectra and proton–proton decoupling, HMQC and NOEDIFF experiments. The spectral data for the above compounds provided the first experimental evidence of the difference in the anisotropy effect of the two non‐symmetrical moieties of the pyridine nucleus, and allowed us to ascertain that the shielding effect of the moiety defined by the C(2′)—N—C(6′) atoms is weaker than that of the C(3′)—C(4′)—C(5′) moiety. The ¹³C NMR spectra of 1 – 3 and 1a – 3a and the effect of N(10)‐oxidation on the ¹³C NMR chemical shifts are also discussed. The N‐oxidation of 2 and 3 with m‐chloroperbenzoic acid occurred regiospecifically, affording the N(10)‐oxides 2a and 3a free of N(1′)‐oxide isomers. Copyright © 2002 John Wiley & Sons, Ltd.     

Push–Pull Buta‐1,2,3‐trienes: Exceptionally Low Rotational Barriers of Cumulenic CC Bonds and Proacetylenic Reactivity

A variety of asymmetrically donor–acceptor‐substituted [3]cumulenes (buta‐1,2,3‐trienes) were synthesized by developed procedures. The activation barriers to rotation ΔG^≠ were measured by variable temperature NMR spectroscopy and found to be as low as 11.8 kcal mol^?1, in the range of the barriers for rotation around sterically hindered single bonds. The central C?C bond of the push–pull‐substituted [3]cumulene moiety is shortened down to 1.22 Å as measured by X‐ray crystallography, leading to a substantial bond length alternation (BLA) of up to 0.17 Å. All the experimental results are supported by DFT calculations. Zwitterionic transition states (TS) of bond rotation confirm the postulated proacetylenic character of donor–acceptor [3]cumulenes. Additional support for the proacetylenic character of these chromophores is provided by their reaction with tetracyanoethene (TCNE) in a cycloaddition‐retroelectrocyclization (CA–RE) cascade characteristic of donor‐polarized acetylenes.     

Aromatic/proaromatic donors in 2-dicyanomethylenethiazole merocyanines: from neutral to strongly zwitterionic nonlinear optical chromophores

Push–pull compounds, in which a proaromatic electron donor is conjugated to a 2‐dicyanomethylenethiazole acceptor, have been prepared, and their properties compared to those of model compounds featuring an aromatic donor. A combined experimental (X‐ray diffraction, ¹H NMR, IR, Raman, UV/Vis, nonlinear optical (NLO) measurements) and theoretical study reveals that structural and solvent effects determine the ground‐state polarisation of these merocyanines: whereas 4H‐pyran‐4‐ylidene‐ and 4‐pyridylidene‐containing compounds are zwitterionic and 1,3‐dithiol‐2‐ylidene derivatives are close to the cyanine limit, anilino‐derived merocyanines are essentially neutral. This very large range of intramolecular charge transfer (ICT) gives rise to efficient second‐order NLO chromophores with μβ values ranging from strongly negative to strongly positive. In particular, pyranylidene derivatives are unusual in that they show an increase in the degree of ICT on lengthening the π‐spacer, a feature that lies behind the very large negative μβ values they display. The linking of the formally quinoidal 2‐dicyanomethylenethiazole moiety to proaromatic donors seems a promising approach towards the optimisation of zwitterionic NLO chromophores.     

Synthesis and Characterization of Donor–π‐Acceptor‐Based Porphyrin Sensitizers: Potential Application of Dye‐Sensitized Solar Cells

New porphyrin sensitizers based on donor–π‐acceptor (D‐π‐A) approach have been designed, synthesized, characterized by various spectroscopic techniques and their photovoltaic properties explored. N,N′‐Diphenylamine acts as donor, the porphyrin is the π‐spacer, and either carboxylic acid or cyanoacryclic acid acts as acceptor. All compounds were characterized by using ¹H NMR spectroscopy, ESI‐MS, UV–visible emission spectroscopies as well as electrochemical methods. The presence of aromatic groups between porphyrin π‐plane and acceptor group push the absorption of both Soret and Q‐bands of porphyrin towards the red region. The electrochemical properties suggests that LUMO of these sensitizers above the TiO₂ conduction band. Finally, the device was fabricated using liquid redox electrolyte (I^?/I₃^?) and its efficiency was compared with that of a leading sensitizer.     

Stable second‐order nonlinear optical poly(amide–imide)/inorganic materials via simultaneous sequential self‐repetitive reaction and sol–gel process

A series of thermally stable organic/inorganic second‐order nonlinear optical (NLO) composites via sequential self‐repetitive reaction (SSRR) and sol–gel process has been developed. This SSRR is based on carbodiimide (CDI) chemistry. The difunctional azo chromophores (2,4‐diamino‐4′‐(4‐ nitrophenyl‐diazenyl)azobenzene (DNDA)) was reacted with excessive amount of 4, 4′‐methylene‐ diphenylisocyanate (MDI) to form poly‐CDI, and subsequently trimellitic anhydride (TMA) was added to obtain poly(N‐acylurea). The organic/inorganic composites containing prepolymer of phenyltriethoxysilane (PTEOS) and poly(N‐acylurea) in different weight ratios (10:90, 30:70, 50:50, 70:30, 90:10 wt%) were prepared, respectively. The moderate glass transition temperature (T_g) characteristic of the poly(N‐acylurea) allows the NLO‐active polymer to achieve high poling efficiency. After in situ poling and curing process, the T_gs of the composites were elevated, and higher than that of the pristine poly(amide–imide) sample. Electro‐optical (EO) coefficients (r₃₃) of about 5.5 ～ 18.0 pm/V at 830 nm were obtained. Excellent temporal stability at 100°C, and waveguide characteristics (3.1–4.2 dB/cm at 830 nm) were also obtained for these composites. Copyright © 2008 John Wiley & Sons, Ltd.