Nickel Oxide/Graphene Composites: Synthesis and Applications

Nickel oxide (NiO) has emerged as one of the most promising transition-metal oxides (TMOs) for electrochemical capacitors, batteries, catalysis, and electrochromic films, owing to its cost-effectiveness, abundance, and well-defined electrochemical properties. Recent studies have identified that mixing NiO with graphene or graphene derivatives results in novel composites with synergistic effects and superior electrochemical performance. This review summarizes the latest advances in composites of NiO with graphene or graphene derivatives. The synthetic strategies, morphologies, and electrochemical performance of these composites are introduced, as well as their electrochemical applications in supercapacitors, batteries, sensors, catalysis, and so forth. Finally, tentative conclusions and assessments regarding the opportunities and challenges for the future development of these composites and other TMOs/graphene or graphene-derived composites are presented.     

Mesoporous Zirconium Phenylenesiliconate‐phosphonate Hybrids with Ordered Lamellar Nanostructures

Novel ordered lamellar mesostructure pZrPS‐2 was hydrothermally prepared by using zirconium propoxide and 4‐(EtO)₂OPC₆H₄Si(OEt)₃ (pPPS‐E), which was hydrolyzed to organic building units substituted with both siliconate and phosphonate groups, in the presence of C_nTAB and TMAOH. The pZrPS‐2 materials were obtained at a Zr/PPS ratio of 2 or higher and the basal spacing was increased by using a longer‐chain surfactant (n=12–18). Removal of the occluded surfactants at 300 °C resulted in retention of the lamellar structure with negligible shrinkage of the interlayer distance. Nitrogen adsorption studies revealed the ordered mesoporous nature of pZrPS‐2 with a pore diameter of approximately 2 to 3 nm. The lamellar structure is assumed to be composed of layers that include zirconia‐based crystalline nanodomains and interlayer pillars mainly based on PPS units. Although lamellar structures with the same crystalline phase also formed when no surfactant was added or when the meta isomer of PPS was used, no mesoporous materials were obtained except pZrPS‐2. A possible schematic model to elucidate these results is also proposed.     

Polyaniline‐Intercalated Molybdenum Oxide Nanocomposites: Simultaneous Synthesis and their Enhanced Application for Supercapacitor

A new and universal synthetic strategy to hybridize metal oxides and conduct polymer nanocomposites has been proposed in this work. The simultaneous reaction process, which includes the generation of metal oxide layers, the oxidation polymerization of monomers, and the in situ formation of polymer–metal oxides sandwich structure is successfully realized and results in the unique hybrid polyaniline (PANI)‐intercalated molybdenum oxide nanocomposites. The peroxomolybdate proved to play a dual role as the precursor of the inorganic hosts and the oxidizing agent for polymerization. The as‐obtained hybrid nanocomposites present a flexible lamellar structure by oriented assembly of conductive PANI chains in the MoO₃ interlayer, and thus inherit excellent electrical performance and possess the potential of active electrode materials for electrochemical energy storage. Such uniform lamellar structure together with the anticipated high conductivity of the hybrid PANI/MoO₃ nanocomposites afford high specific capacitance and good stability during the charge–discharge cycling for supercapacitor application.     

Two‐Dimensional Co@N‐Carbon Nanocomposites Facilely Derived from Metal–Organic Framework Nanosheets for Efficient Bifunctional Electrocatalysis

Metal–organic frameworks (MOFs) and MOF‐derived nanomaterials have recently attracted great interest as highly efficient, non‐noble‐metal catalysts. In particular, two‐dimensional MOF nanosheet materials possess the advantages of both 2D layered nanomaterials and MOFs and are considered to be promising nanomaterials. Herein, we report a facile and scalable in situ hydrothermal synthesis of Co–hypoxanthine (HPA) MOF nanosheets, which were then directly carbonized to prepare uniform Co@N‐Carbon nanosheets for efficient bifunctional electrocatalytic hydrogen‐evolution reactions (HERs) and oxygen‐evolution reactions (OERs). The Co embedded in N‐doped carbon shows excellent and stable catalytic performance for bifunctional electrocatalytic OERs and HERs. For OERs, the overpotential of Co@N‐Carbon at 10 mA cm^?2 was 400 mV (vs. reversible hydrogen electrode, RHE). The current density of Co@N‐Carbon reached 100 mA cm^?2 at an overpotential of 560 mV, which showed much better performance than RuO₂; the largest current density of RuO₂ that could be reached was only 44 mA cm^?2. The Tafel slope of Co@N‐Carbon was 61 mV dec^?1, which is comparable to that of commercial RuO₂ (58 mV dec^?1). The excellent electrocatalytic properties can be attributed to the nanosheet structure and well‐dispersed carbon‐encapsulated Co, CoN nanoparticles, and N‐dopant sites, which provided high conductivity and a large number of accessible active sites. The results highlight the great potential of utilizing MOF nanosheet materials as promising templates for the preparation of 2D Co@N‐Carbon materials for electrocatalysis and will pave the way to the development of more efficient 2D nanomaterials for various catalytic applications.     

Chemically Delaminated Free‐Standing Ultrathin Covalent Organic Nanosheets

Covalent organic nanosheets (CONs) are a new class of porous thin two‐dimensional (2D) nanostructures that can be easily designed and functionalized and could be useful for separation applications. Poor dispersion, layer restacking, and difficult postsynthetic modifications are the major hurdles that need to be overcome to fabricate scalable CON thin films. Herein, we present a unique approach for the chemical exfoliation of an anthracene‐based covalent organic framework (COF) to N‐hexylmaleimide‐functionalized CONs, to yield centimeter‐sized free‐standing thin films through layer‐by‐layer CON assembly at the air–water interface. The thin‐layer fabrication technique presented here is simple, scalable, and does not require any surfactants or stabilizing agents.     

Hydrothermal Synthesis and Primary Gas Sensing Properties of CuO Nanosheets

Uniformity nanosheets of CuO were prepared by a mild hydrothermal synthesis method. Phase analysis was carried out using x-ray diffraction (XRD) and the result confirmed the CuO nanosheets as a single phase. The field-emission scanning electron microscopy (FE-SEM) was used to observe the morphology of CuO nanosheets while the gas sensing properties of these unique CuO nanosheets were tested at a static state system. The results show that the CuO has uniformity nanosheets, and the gas sensing property show that the CuO nanosheets gas sensor has a stable gas response and the same gas sensitivity trend to tested gases. This method may be suitable for larger-scale production of these CuO nanosheets for practical applications.     

High‐Yield Synthesis of Amido‐Functionalized Polyoctahedral Oligomeric Silsesquioxanes by Using Acyl Chlorides

Homosubstituted amido‐functionalized polyoctahedral oligomeric silsesquioxanes (POSS) have been synthesized by using acyl chlorides in high yields (ca. 95 %). The method proved to be superior over “conventional” syntheses applying carboxylic acids or acid anhydrides, which are much less efficient (ca. 60 % yield). A palette of aryl and alkyl groups has been used as side‐chains. The structures of the resulting amide‐POSS are supported by multinuclear ¹H, ¹³C, ²⁹Si NMR and FTIR spectroscopy and their full conversion into octasubstituted derivatives was confirmed using mass spectrometry. We also demonstrate that the functionalized silsesquioxanes with bulky organic side‐chains attached to cubic siloxane core form spherical‐like, well‐separated nanoparticles with a size of approximately 5 nm.     

One‐Pot Synthesis of Carbon‐Coated Nanostructured Iron Oxide on Few‐Layer Graphene for Lithium‐Ion Batteries

Nanostructure engineering has been demonstrated to improve the electrochemical performance of iron oxide based electrodes in Li‐ion batteries (LIBs). However, the synthesis of advanced functional materials often requires multiple steps. Herein, we present a facile one‐pot synthesis of carbon‐coated nanostructured iron oxide on few‐layer graphene through high‐pressure pyrolysis of ferrocene in the presence of pristine graphene. The ferrocene precursor supplies both iron and carbon to form the carbon‐coated iron oxide, while the graphene acts as a high‐surface‐area anchor to achieve small metal oxide nanoparticles. When evaluated as a negative‐electrode material for LIBs, our composite showed improved electrochemical performance compared to commercial iron oxide nanopowders, especially at fast charge/discharge rates.     

Self‐Construction from 2D to 3D: One‐Pot Layer‐by‐Layer Assembly of Graphene Oxide Sheets Held Together by Coordination Polymers

Deposition of Ni‐based cyanide bridged coordination polymer (NiCNNi) flakes onto the surfaces of graphene oxide (GO) sheets, which allows precise control of the resulting lamellar nanoarchitecture by in situ crystallization, is reported. GO sheets are utilized as nucleation sites that promote the optimized crystal growth of NiCNNi flakes. The NiCNNi‐coated GO sheets then self‐assemble and are stabilized as ordered lamellar nanomaterials. Regulated thermal treatment under nitrogen results in a Ni₃C–GO composite with a similar morphology to the starting material, and the Ni₃C–GO composite exhibits outstanding electrocatalytic activity and excellent durability for the oxygen reduction reaction.     

Synthesis and characterization of UV‐curable ladder‐like polysilsesquioxane

Various ladder‐like structured poly(phenyl‐co‐methacryl silsesquioxane)s (LPMSQ)s with high molecular weight (M_w = 10,000 ～ 40,000) were synthesized by direct hydrolysis and polymerization in the presence of base catalyst at 25 °C. Synthesized LPMSQs mainly showed ladder‐like structure and photo‐cure reaction by 100 mW/cm² (360 nm) for 10 s without any photo‐cure initiators. Chemical composition and structural analysis of the obtained LPMSQs were characterized using ¹H NMR, ²⁹Si NMR, Fourier transform infrared spectroscopy (FTIR), gel permeation chromatography (GPC), and X‐ray diffraction (XRD). Physical properties of LPMSQs before and after photcuring were analyzed by Nanoindentation. Surface modulus increased to 8GPa and hardness of thin films increased from 100 to 400 MPa. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of polyhedral oligomeric silsesquioxane hybrid co‐crosslinked poly(N‐isopropylacrylamide‐co‐dimethylaminoethyl methacrylate) hydrogels

Polyhedral oligomeric silsesquioxane hybrid temperature and pH double‐responsive hydrogels with organic–inorganic co‐crosslinked networks are synthesized by in situ, free‐radical polymerization of N‐isopropylacrylamide and dimethylaminoethyl methacrylate in the presence of both organic crosslinker N,N′‐methylenebis(acrylamide) (BIS) and inorganic crosslinker octavinyl polyhedral oligomeric silsesquioxane (OvPOSS) in tetrahydrofuran media. The resulting hydrogels (OR‐OvP gels) display obvious temperature and pH double responsiveness, OvPOSS particles dispersed in polymer make a dominant effect on the properties of gels. With the increase of OvPOSS, the aggregation of particles on nano‐ or microscale happens and causes a considerable change on the properties of gels, such as the lower critical solution temperature and better compression strength. Specially, the interconnected microporous structure of gels ascribed to the microphase separation results in faster deswelling rate, which makes the gel become attractive. Besides, the crosslink by BIS intensifies the heterogeneity of gels significantly, which could also be used to adjust the properties of gels. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1494–1504     

Graphene‐Assisted Room‐Temperature Synthesis of 2D Nanostructured Hybrid Electrode Materials: Dramatic Acceleration of the Formation Rate of 2D Metal Oxide Nanoplates Induced by Reduced Graphene Oxide Nanosheets

A new prompt room temperature synthetic route to 2D nanostructured metal oxide–graphene‐hybrid electrode materials can be developed by the application of colloidal reduced graphene oxide (RGO) nanosheets as an efficient reaction accelerator for the synthesis of δ‐MnO₂ 2D nanoplates. Whereas the synthesis of the 2D nanostructured δ‐MnO₂ at room temperature requires treating divalent manganese compounds with persulfate ions for at least 24 h, the addition of RGO nanosheet causes a dramatic shortening of synthesis time to 1 h, underscoring its effectiveness for the promotion of the formation of 2D nanostructured metal oxide. To the best of our knowledge, this is the first example of the accelerated synthesis of 2D nanostructured hybrid material induced by the RGO nanosheets. The observed acceleration of nanoplate formation upon the addition of RGO nanosheets is attributable to the enhancement of the oxidizing power of persulfate ions, the increase of the solubility of precursor MnCO₃, and the promoted crystal growth of δ‐MnO₂ 2D nanoplates. The resulting hybridization between RGO nanosheets and δ‐MnO₂ nanoplates is quite powerful not only in increasing the surface area of manganese oxide nanoplate but also in enhancing its electrochemical activity. Of prime importance is that the present δ‐MnO₂–RGO nanocomposites show much superior electrode performance over most of 2D nanostructured manganate systems including a similar porous assembly of RGO and layered MnO₂ nanosheets. This result underscores that the present RGO‐assisted solution‐based synthesis can provide a prompt and scalable method to produce nanostructured hybrid electrode materials.     

Hollow and Yolk‐Shell Iron Oxide Nanostructures on Few‐Layer Graphene in Li‐Ion Batteries

We report a simple and template‐free strategy for the synthesis of hollow and yolk‐shell iron oxide (FeO_x) nanostructures sandwiched between few‐layer graphene (FLG) sheets. The morphology and microstructure of this material are characterized in detail by X‐ray diffraction, X‐ray absorption near‐edge structure, X‐ray photoelectron spectroscopy, Raman spectroscopy, scanning and transmission electron microscopy. Its properties are evaluated as negative electrode material for Li‐ion batteries and compared with those of solid FeO_x/FLG and two commercial iron oxides. In all cases, the content of carbon in the electrode has a great influence on the performance. The use of pristine FLG improves the capacity retention and further enhancement is achieved with the hollow structure. For a low carbon loading of 18 wt. %, the presence of metallic iron in the hollow and yolk‐shell FeO_x/FLG composite significantly enhances the capacity retention, albeit with a relatively lower initial reversible capacity, retaining above 97 % after 120 cycles at 1000 mA g^?1 in the voltage range of 0.1–3.0 V.