Ionic‐Liquid‐Assisted Synthesis of Uniform Fluorinated B/C‐Codoped TiO2 Nanocrystals and Their Enhanced Visible‐Light Photocatalytic Activity

Exploiting advanced photocatalysts under visible light is of primary significance for the development of environmentally relevant photocatalytic decontamination processes. In this study, the ionic liquid (IL), 1‐butyl‐3‐methylimidazolium tetrafluoroborate, was employed for the first time as both a structure‐directing agent and a dopant for the synthesis of novel fluorinated B/C‐codoped anatase TiO₂ nanocrystals (T_IL) through hydrothermal hydrolysis of tetrabutyl titanate. These T_IL nanocrystals feature uniform crystallite and pore sizes and are stable with respect to phase transitions, crystal ripening, and pore collapse upon calcination treatment. More significantly, these nanocrystals possess abundant localized states and strong visible‐light absorption in a wide range of wavelengths. Because of synergic interactions between titania and codopants, the calcined T_IL samples exhibited high visible‐light photocatalytic activity in the presence of oxidizing Rhodamine B (RhB). In particular, 300 °C‐calcined T_IL was most photocatalytically active; its activity was much higher than that of TiO_1.98N_0.02 and reference samples (T_W) obtained under identical conditions in the absence of ionic liquid. Furthermore, the possible photocatalytic oxidation mechanism and the active species involved in the RhB degradation photocatalyzed by the T_IL samples were primarily investigated experimentally by using different scavengers. It was found that both holes and electrons, as well as their derived active species, such as ^.OH, contributed to the RhB degradation occurring on the fluorinated B/C‐codoped TiO₂ photocatalyst, in terms of both the photocatalytic reaction dynamics and the reaction pathway. The synthesis of the aforementioned novel photocatalyst and the identification of specific active species involved in the photodegradation of dyes could shed new light on the design and synthesis of semiconductor materials with enhanced photocatalytic activity towards organic pollutants.     

Deep Desulfurization by Amphiphilic Lanthanide‐Containing Polyoxometalates in Ionic‐Liquid Emulsion Systems under Mild Conditions

Amphiphilic lanthanide‐containing polyoxometalates (POMs) were prepared by surfactant encapsulation. Investigation of these lanthanide‐containing POMs in oxidative desulfurization (ODS) showed that highly efficient deep desulfurization could be achieved in only 14 min with 100 % conversion of dibenzothiophene under mild conditions by using (DDA)₉LaW₁₀/[omim]PF₆ (DDA=dimethyldioctadecylammonium, omim=1‐octyl‐3‐methyl‐imidazolium) in the presence of H₂O₂. Furthermore, deep desulfurization proceeds smoothly in model oil with an S content as low as 50 ppm. A scaled‐up experiment in which the volume of model oil was increased from 5 to 1000 mL with S content of 1000 ppm indicated that about 99 % sulfur removal can be achieved in 40 mins in an ionic‐liquid emulsion system. To the best of our knowledge, the (DDA)₉LaW₁₀/[omim]PF₆ catalyst system with H₂O₂ as oxidant is one of the most efficient desulfurization systems reported so far.     

Ion‐Responsive Behavior of Ionic‐Liquid Surfactant Aggregates with Applications in Controlled Release and Emulsification

We propose a simple but efficient, rapid, and quantitative ion‐responsive micelle system based on counter‐anion exchange of a surfactant with an imidazolium unit. The ion‐exchange reaction results in the amphiphilic‐to‐hydrophobic transition of the imidazolium salt, leading to the destruction of the micelles, which has been successfully applied to controlled release and emulsification. The proposed design offers a novel alternative stimulus to control these smart physical aggregates besides pH, temperature and light—with extra advantages. Our finding greatly benefits both fundamental research and industry.     

Scalable Synthesis of Piperazines Enabled by Visible‐Light Irradiation and Aluminum Organometallics

The development of more active C? H oxidation catalysts has inspired a rapid, scalable, and stereoselective assembly of multifunctional piperazines through a [3+3] coupling of azomethine ylides. A combination of visible‐light irradiation and aluminum organometallics is essential to promote this transformation, which introduces visible‐light photochemistry of main‐group organometallics and sets the basis for new and promising catalysts.     

Functionalization of Carbon Nanotubes by an Ionic‐Liquid Polymer: Dispersion of Pt and PtRu Nanoparticles on Carbon Nanotubes and Their Electrocatalytic Oxidation of Methanol

Small beginnings : Metal nanoparticle/CNT nanohybrids are synthesized from carbon nanotubes (CNTs) functionalized with an ionic‐liquid polymer. The Pt and PtRu nanoparticles with narrow size distribution (average diameter: (1.3±0.4) nm for PtRu, (1.9±0.5) nm for Pt) are dispersed uniformly on the CNTs (see images) and show good performance in methanol electrooxidation.

     

A Long‐Life Lithium Ion Battery with Enhanced Electrode/Electrolyte Interface by Using an Ionic Liquid Solution

In this paper, we report an advanced long‐life lithium ion battery, employing a Pyr₁₄TFSI‐LiTFSI non‐flammable ionic liquid (IL) electrolyte, a nanostructured tin carbon (Sn‐C) nanocomposite anode, and a layered LiNi_1/3Co_1/3Mn_1/3O₂ (NMC) cathode. The IL‐based electrolyte is characterized in terms of conductivity and viscosity at various temperatures, revealing a Vogel–Tammann–Fulcher (VTF) trend. Lithium half‐cells employing the Sn‐C anode and NMC cathode in the Pyr₁₄TFSI‐LiTFSI electrolyte are investigated by galvanostatic cycling at various temperatures, demonstrating the full compatibility of the electrolyte with the selected electrode materials. The NMC and Sn‐C electrodes are combined into a cathode‐limited full cell, which is subjected to prolonged cycling at 40 °C, revealing a very stable capacity of about 140 mAh g^?1 and retention above 99 % over 400 cycles. The electrode/electrolyte interface is further characterized through a combination of electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) investigations upon cell cycling. The remarkable performances reported here definitively indicate that IL‐based lithium ion cells are suitable batteries for application in electric vehicles.     

Improvement of the Visible‐Light Photocatalytic Performance of TiO2 by Carbon Mesostructures

An improvement in the photodegradation performance for dyes due to interaction between carbon and titania in a self‐assembled mesoporous C? TiO₂ composite catalyst, even for the difficult degradation of azo dyes, is reported herein. The dye removal process involves adsorption of the dye from water by the mesoporous carbon–titania, followed by photodegradation on the separated dye‐loaded solid. Such adsorption–catalysis cycles can be carried out more than 80 times without discernible loss of photocatalytic activity or the anatase content of the composite. In each run, about 120 mg dye per g catalyst can be degraded. The mesoporous carbon–titania catalyst also exhibits a high capacity for converting methyl orange in aqueous solution under visible light. Characterization by XRD, TEM, and N₂ sorption techniques has revealed that the self‐assembled composite catalyst has an ordered mesostructure, uniform mesopores (4.3 nm), a large pore volume (0.30 cm³ g^?1), and a high surface area (348 m² g^?1). The pore walls are composed of amorphous carbon and anatase nanoparticles of size 4.2 nm, which are well dispersed and confined. X‐ray photoelectron spectroscopy (XPS), surface photovoltage spectroscopy (SPS), and UV/Vis absorption results indicate doping of carbon into the anatase lattice and a change in the bandgap of the semiconductor. The synergistic improvement in the composite catalyst can be attributed to the following features: (1) carbon doping of the anatase lattice modifies its bandgap and enhances its activity under visible light; (2) confinement within carbon pore walls prevents aggregation of tiny anatase nanoparticles, improving their activity and stability; (3) the mesopores provide a confined space for photocatalysis; and (4) the strong adsorption ability of porous carbon for organic substances ensures that large quantities can be processed and inhibits further diffusion of the adsorbed organic substances, thereby enhancing the mineralization on anatase.     

Application of Static Charge Transfer within an Ionic‐Liquid Force Field and Its Effect on Structure and Dynamics

The effects of linear scaling of the atomic charges of a reference potential on the structure, dynamics, and energetics of the ionic liquid 1,3‐dimethylimidazolium chloride are investigated. Diffusion coefficients that span over four orders of magnitude are observed between the original model and a scaled model in which the ionic charges are ±0.5 e. While the three‐dimensional structure of the liquid is less affected, the partial radial distribution functions change markedly—with the positive result that for ionic charges of ±0.7 e, an excellent agreement is observed with ab initio molecular dynamics data. Cohesive energy densities calculated from these partial‐charge models are also in better agreement with those calculated from the ab initio data. We postulate that ionic‐liquid models in which the ionic charges are assumed to be ±1 e overestimate the intermolecular attractions between ions, which results in overstructuring, slow dynamics, and increased cohesive energy densities. The use of scaled‐charge sets may be of benefit in the simulation of these systems—especially when looking at properties beyond liquid structure—thus providing an alternative to computationally expensive polarisable force fields.     

Quantitative Analysis of Alpha‐D‐glucose in an Ionic Liquid by Using Infrared Spectroscopy

The applicability of infrared (IR) spectroscopy for quantitative concentration measurements in mixtures of carbohydrates and ionic liquids (ILs) is investigated. The compound 1‐ethyl‐3‐methylimidazolium acetate, [EMIM][OAc]—an “enzyme‐friendly” ionic liquid with great application potential in the dissolution of various biomasses—is used as solvent in combination with alpha‐D ‐glucose. Our study establishes a new way to monitor the concentration of sugars in ILs, thus providing a convenient method to follow the kinetics of, for example, enzymatic reactions in [EMIM][OAc]. As a first step, we present the IR spectrum of pure [EMIM][OAc] (this constitutes the first vibrational study of this particular IL). Although numerous lines overlap in the fingerprint region of the spectrum, characteristic features can be assigned to the corresponding vibrational modes of both ions. Secondly, we study different mixtures of the IL with alpha‐D ‐glucose (in the concentration range: 0–20 mass % glucose) and analyze them by means of IR spectroscopy, followed by computational methods, thus demonstrating the great potential of this spectroscopic technique in quantitative measurements.     

Ionic‐liquid‐based ultrasound‐assisted extraction of isoflavones from Belamcanda chinensis and subsequent screening and isolation of potential α‐glucosidase inhibitors by ultrafiltration and semipreparative high‐performance liquid chromatography

The separation of a compound of interest from its structurally similar homologues to produce high‐purity natural products is a challenging problem. This work proposes a novel method for the separation of iristectorigenin A from its structurally similar homologues by ionic‐liquid‐based ultrasound‐assisted extraction and the subsequent screening and isolation of potential α‐glucosidase inhibitors via ultrafiltration and semipreparative high‐performance liquid chromatography. Ionic‐liquid‐based ultrasound‐assisted extraction was successfully applied to the extraction of tectorigenin, iristectorigenin A, irigenin, and irisflorentin from Belamcanda chinensis . The optimum conditions for the efficient extraction of isoflavones were determined as 1.0 M 1‐ethyl‐3‐methylimidazolium tetrafluoroborate with extraction time of 30 min and a solvent to solid ratio of 30 mL/g. Ultrafiltration with liquid chromatography and mass spectrometry was applied to screen and identify α‐glucosidase inhibitors from B. chinensis , followed by the application of semipreparative high‐performance liquid chromatography to separate and isolate the active constituents. Four major compounds including tectorigenin, iristectorigenin A, irigenin, and irisflorentin were screened and identified as α‐glucosidase inhibitors, and then the four active compounds abovementioned were subsequently isolated by semipreparative high‐performance liquid chromatography (99.89, 88.97, 99.79, and 99.97% purity, respectively). The results demonstrate that ionic liquid extraction can be successfully applied to the extraction of isoflavones from B. chinensis .     

Interface Engineering of a CoOx/Ta3N5 Photocatalyst for Unprecedented Water Oxidation Performance under Visible‐Light‐Irradiation

Cocatalysts have been extensively used to promote water oxidation efficiency in solar‐to‐chemical energy conversion, but the influence of interface compatibility between semiconductor and cocatalyst has been rarely addressed. Here we demonstrate a feasible strategy of interface wettability modification to enhance water oxidation efficiency of the state‐of‐the‐art CoO_x/Ta₃N₅ system. When the hydrophobic feature of a Ta₃N₅ semiconductor was modulated to a hydrophilic one by in situ or ex situ surface coating with a magnesia nanolayer (2–5 nm), the interfacial contact between the hydrophilic CoO_x cocatalyst and the modified hydrophilic Ta₃N₅ semiconductor was greatly improved. Consequently, the visible‐light‐driven photocatalytic oxygen evolution rate of the resulting CoO_x/MgO(in)–Ta₃N₅ photocatalyst is ca. 23 times that of the pristine Ta₃N₅ sample, with a new record (11.3 %) of apparent quantum efficiency (AQE) under 500–600 nm illumination.     

Microwave Irradiation for the Facile Synthesis of Transition‐Metal Nanoparticles (NPs) in Ionic Liquids (ILs) from Metal–Carbonyl Precursors and Ru‐, Rh‐, and Ir‐NP/IL Dispersions as Biphasic Liquid–Liquid Hydrogenation Nanocatalysts for Cyclohexene

Stable chromium, molybdenum, tungsten, manganese, rhenium, ruthenium, osmium, cobalt, rhodium, and iridium metal nanoparticles (M‐NPs) have been reproducibly obtained by facile, rapid (3 min), and energy‐saving 10 W microwave irradiation (MWI) under an argon atmosphere from their metal–carbonyl precursors [M_x(CO)_y] in the ionic liquid (IL) 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIm][BF₄]). This MWI synthesis is compared to UV‐photolytic (1000 W, 15 min) or conventional thermal decomposition (180–250 °C, 6–12 h) of [M_x(CO)_y] in ILs. The MWI‐obtained nanoparticles have a very small (<5 nm) and uniform size and are prepared without any additional stabilizers or capping molecules as long‐term stable M‐NP/IL dispersions (characterization by transmission electron microscopy (TEM), transmission electron diffraction (TED), and dynamic light scattering (DLS)). The ruthenium, rhodium, or iridium nanoparticle/IL dispersions are highly active and easily recyclable catalysts for the biphasic liquid–liquid hydrogenation of cyclohexene to cyclohexane with activities of up to 522 (mol product) (mol Ru)^?1 h^?1 and 884 (mol product) (mol Rh)^?1 h^?1 and give almost quantitative conversion within 2 h at 10 bar H₂ and 90 °C. Catalyst poisoning experiments with CS₂ (0.05 equiv per Ru) suggest a heterogeneous surface catalysis of Ru‐NPs.     

Fabrication of AgI/MIL‐53(Fe) Composites with Enhanced Photocatalytic Activity for Rhodamine B Degradation under Visible Light Irradiation

AgI/MIL‐53(Fe) composites were fabricated through a simple solution method, and their photocatalytic activities on Rhodamine B (RhB) degradation were investigated. The results demonstrated that the introduction of AgI into the MIL‐53(Fe) was beneficial to the enhanced visible light response. Under visible light irradiation, almost 100 % RhB was bleached over AgI/MIL‐53(Fe) composites after 180 min. The promising photocatalytic performance was ascribed to three points: the existence of AgI helped to generate easily the electrons and holes in the composites; an intimate interfacial contact between MIL‐53 (Fe) and AgI offered the path for the charge carries transport; MIL‐53 (Fe) could fast transfer the excited electrons due to its inherent nature. Thus, these results were responsible for the effective inhibition of charge carrier recombination, resulting in an improved photocatalytic activity.     

硼铈共掺杂纳米TiO2光催化降解三氯杀螨醇和菊酯类农药

采用溶胶-凝胶法在钛酸丁酯水解过程引入硼酸、硝酸铈,制备具有光催化活性的硼铈共掺杂纳米二氧化钛（TiO2）,经XRD、TEM、FT-IR、UV-Vis-DRS表征晶体结构,在日光灯照射下,光催化降解三氯杀螨醇、高氟氯氰菊酯、氟戊菊酯农药。结果表明：硼铈共掺杂的TiO2只有锐钛矿型,而纯的或掺铈的TiO2有含有锐钛矿型、金红石相和少量板钛矿型,UV-Vis-DRS测定结果表明硼铈共掺杂的TiO2禁带宽度变小,硼铈共掺杂的TiO2在可见光区吸光度高于掺杂铈和不掺杂的TiO2,在420nm~850nm有强的吸收;在同样光照下对三氯杀螨醇、高氟氯氰菊酯、氟戊菊酯的降解试验证明硼铈共掺杂纳米TiO2的光催化活性高于不掺杂或只掺杂铈的TiO2。