Palladium‐Catalyzed Intramolecular Hydroamination of Allenes Coupled to Aerobic Alcohol Oxidation

Taking the air! A Pd^II‐catalyzed intramolecular hydroamination of allenes coupled to alcohol oxidation has been developed. This reaction is performed by using a nitrogen‐based ligand under aerobic conditions, under which the molecular oxygen is used as the terminal oxidant for the reoxidation of Pd⁰ species to complete the catalytic cycle.

     

CO/C‐H as an Acylating Reagent: A Palladium‐Catalyzed Aerobic Oxidative Carbonylative Esterification of Alcohols

A palladium‐catalyzed oxidative carbonylative esterification of a variety of functionalized alcohols under base‐ and ligand‐free conditions has been demonstrated. A CO/olefin combination was utilized as the acylating reagent with O₂ as a benign oxidant. Notably, the scope of the substrate alcohols has been greatly broadened.     

A TEMPO‐Free Copper‐Catalyzed Aerobic Oxidation of Alcohols

The copper‐catalyzed aerobic oxidation of primary and secondary alcohols without an external N‐oxide co‐oxidant is described. The catalyst system is composed of a Cu/diamine complex inspired by the enzyme tyrosinase, along with dimethylaminopyridine (DMAP) or N‐methylimidazole (NMI). The Cu catalyst system works without 2,2,6,6‐tetramethyl‐l‐piperidinoxyl (TEMPO) at ambient pressure and temperature, and displays activity for un‐activated secondary alcohols, which remain a challenging substrate for catalytic aerobic systems. Our work underscores the importance of finding alternative mechanistic pathways for alcohol oxidation, which complement Cu/TEMPO systems, and demonstrate, in this case, a preference for the oxidation of activated secondary over primary alcohols.     

Palladium‐Catalyzed Decarbonylative Trifluoromethylation of Acid Fluorides

While acid fluorides can readily be made from widely available or biomass‐feedstock‐derived carboxylic acids, their use as functional groups in metal‐catalyzed cross‐coupling reactions is rare. This report presents the first demonstration of Pd‐catalyzed decarbonylative functionalization of acid fluorides to yield trifluoromethyl arenes (ArCF₃). The strategy relies on a Pd/Xantphos catalytic system and the supply of fluoride for transmetalation through intramolecular redistribution to the the Pd center. This strategy eliminated the need for exogenous and detrimental fluoride additives and allows Xantphos to be used in catalytic trifluoromethylations for the first time. Our experimental and computational mechanistic data support a sequence in which transmetalation by R₃SiCF₃ occurs prior to decarbonylation.     

Synthesis of Cyclooctatetraenes through a Palladium‐Catalyzed Cascade Reaction

Reported is a cascade reaction leading to fully substituted cyclooctatetraenes. This unexpected transformation likely proceeds through a unique 8π electrocyclization reaction of a ene triyne. DFT computations provide the mechanistic basis of this surprizing reaction.     

Oxygen‐Assisted Hydroxymatairesinol Dehydrogenation: A Selective Secondary‐Alcohol Oxidation over a Gold Catalyst

Selective dehydrogenation of the biomass‐derived lignan hydroxymatairesinol (HMR) to oxomatairesinol (oxoMAT) was studied over an Au/Al₂O₃ catalyst. The reaction was carried out in a semi‐batch glass reactor at 343 K under two different gas atmospheres, namely produced through synthetic air or nitrogen. The studied reaction is, in fact, an example of secondary‐alcohol oxidation over an Au catalyst. Thus, the investigated reaction mechanism of HMR oxidative dehydrogenation is useful for the fundamental understanding of other secondary‐alcohol dehydrogenation over Au surfaces. To investigate the elementary catalytic steps ruling both oxygen‐free‐ and oxygen‐assisted dehydrogenation of HMR to oxoMAT, the reactions were mimicked in a vacuum over an Au₂₈ cluster. Adsorption of the involved molecular species—O₂, three different HMR diastereomers (namely, one SRR and two RRR forms), and the oxoMAT derivative—were also studied at the DFT level. In particular, the energetic and structural differences between SRR‐HMR and RRR‐HMR diastereomers on the Au₂₈ cluster were analyzed, following different reaction pathways for the HMR dehydrogenation that occur in presence or absence of oxygen. The corresponding mechanisms explain the higher rates of the experimentally observed oxygen‐assisted reaction, mostly depending on the involved HMR diastereomer surface conformations. The role of the support was also elucidated, considering a very simple Au₂₈ charged model that explains the experimentally observed high reactivity of the Au/Al₂O₃ catalyst.     

Palladium‐Catalyzed N‐Alkylation of Amides and Amines with Alcohols Employing the Aerobic Relay Race Methodology

Possibly because homogeneous palladium catalysts are not typical borrowing hydrogen catalysts and ligands are thus ineffective in catalyst activation under conventional anaerobic conditions, they had not been used in the N‐alkylation reactions of amines/amides with alcohols in the past. By employing the aerobic relay race methodology with Pd‐catalyzed aerobic alcohol oxidation being a more effective protocol for alcohol activation, ligand‐free homogeneous palladiums are successfully used as active catalysts in the dehydrative N‐alkylation reactions, giving high yields and selectivities of the alkylated amides and amines. Mechanistic studies implied that the reaction most probably proceeds via the novel relay race mechanism we recently discovered and proposed.     

A Versatile Synthesis of β‐Lactam‐Fused Oxacycles through the Palladium‐Catalyzed Chemo‐, Regio‐, and Diastereoselective Cyclization of Allenic Diols

Chemo‐, regio‐ and stereocontrolled palladium‐catalyzed preparations of enantiopure morpholines, oxocines, and dioxonines have been developed starting from 2‐azetidinone‐tethered γ,δ‐, δ,ε‐, and ε,ζ‐allendiols. The palladium‐catalyzed cyclizative coupling reaction of γ,δ‐allendiols 2 with allyl bromide or lithium bromide was effective as 8‐endo cyclization by attack of the primary hydroxy group to the terminal allene carbon to afford enantiopure functionalized oxocines; whereas the palladium‐catalyzed cyclizative coupling reaction of 2‐azetidinone‐tethered ε,ζ‐allendiols 4 furnished dioxonines 16 through a totally chemo‐ and regioselective 9‐endo oxycyclization. By contrast, the palladium‐catalyzed cyclizative coupling reaction of 2‐azetidinone‐tethered δ,ε‐allendiols 3 with aryl and alkenyl halides exclusively generated six‐membered‐ring compounds 14 a and 15 a . These results could be explained through a 6‐exo cyclization by chemo‐ and regiospecific attack of the secondary hydroxy group to the internal allene carbon. Chemo‐ and regiocontrol issues are mainly influenced by the length of the tether rather than by the nature of the metal catalysts and substituents. This reactivity can be rationalized by means of density functional theory calculations.     

Palladium‐Catalyzed Aminocarbonylation of Allylic Alcohols

A benign and efficient palladium‐catalyzed aminocarbonylation reaction of allylic alcohols is presented. The generality of this novel process is demonstrated by the synthesis of β,γ‐unsaturated amides including aliphatic, cinnamyl, and terpene derivatives. The choice of ligand is crucial for optimal carbonylation processes: Whereas in most cases the combination of PdCl₂ with Xantphos ( L6 ) gave best results, sterically hindered substrates performed better in the presence of simple triphenylphosphine ( L10 ), and primary anilines gave the best results using cataCXium® PCy ( L8 ). The reactivity of the respective catalyst system is significantly enhanced by addition of small amounts of water. Mechanistic studies and control experiments revealed a tandem allylic alcohol amination/C?N bond carbonylation reaction sequence.     

Influence of Periodic Nitrogen Functionality on the Selective Oxidation of Alcohols

An enhancement in catalytic alcohol oxidation activity is attributed to the presence of nitrogen heteroatoms on the external surface of a support material. The same Pd particles (3.1–3.2 nm) were supported on polymeric carbon–nitrogen supports and used as catalysts to selectively oxidize benzyl alcohol. The polymeric carbon–nitrogen materials include covalent triazine frameworks (CTF) and carbon nitride (C₃N₄) materials with nitrogen content varying from 9 to 58 atomic percent. With comparable metal exposure, estimated by X‐ray photoelectron spectroscopy, the activity of these catalysts correlates with the concentration of nitrogen species on the surface. Because the catalysts showed comparable acidic/basic properties, this enhancement cannot be ascribed to the Lewis basicity but most probably to the nature of N‐containing groups that govern the adsorption sites of the Pd nanoparticles.     

Computational Study of the Mechanism and Selectivity of Palladium‐Catalyzed Propargylic Substitution with Phosphorus Nucleophiles

The mechanism and sources of selectivity in the palladium‐catalyzed propargylic substitution reaction that involves phosphorus nucleophiles, and which yields predominantly allenylphosphonates and related compounds, have been studied computationally by means of density functional theory. Full free‐energy profiles are computed for both H‐phosphonate and H‐phosphonothioate substrates. The calculations show that the special behavior of H‐phosphonates among other heteroatom nucleophiles is indeed reflected in higher energy barriers for the attack on the central carbon atom of the allenyl/propargyl ligand relative to the ligand‐exchange pathway, which leads to the experimentally observed products. It is argued that, to explain the preference of allenyl‐ versus propargyl‐phosphonate/phosphonothioate formation in reactions that involve H‐phosphonates and H‐phosphonothioates, analysis of the complete free‐energy surfaces is necessary, because the product ratio is determined by different transition states in the respective branches of the catalytic cycle. In addition, these transition states change in going from a H‐phosphonate to a H‐phosphonothioate nucleophile.     

Aerobic Palladium‐Catalyzed Dioxygenation of Alkenes Enabled by Catalytic Nitrite

Catalytic nitrite was found to enable carbon–oxygen bond‐forming reductive elimination from unstable alkyl palladium intermediates, providing dioxygenated products from alkenes. A variety of functional groups were tolerated, and high yields (up to 94 %) were observed with many substrates, also for a multigram‐scale reaction. Nitrogen dioxide, which could form from nitrite under the reaction conditions, was demonstrated to be a potential intermediate in the catalytic cycle. Furthermore, the reductive elimination event was probed with ¹⁸O‐labeling experiments, which demonstrated that both oxygen atoms in the difunctionalized products were derived from one molecule of acetic acid.     

Palladium‐Catalyzed Vicinal Amino Alcohols Synthesis from Allyl Amines by In Situ Tether Formation and Carboetherification

Vicinal amino alcohols are important structural motifs of bioactive compounds. Reported herein is an efficient method for their synthesis based on the palladium‐catalyzed oxy‐alkynylation, oxy‐arylation, or oxy‐vinylation of allylic amines. High regio‐ and stereoselectivity were ensured through the in situ formation of a hemiaminal tether using the cheap commercially available trifluoroacetaldehyde in its hemiacetal form. The obtained compounds are important building blocks, which can be orthogonally deprotected to give either free alcohols, amines, or terminal alkynes.     

Mechanistic Insights into Palladium‐Catalyzed Silylation of Aryl Iodides with Hydrosilanes through a DFT Study

The catalytic cycles of palladium‐catalyzed silylation of aryl iodides, which are initiated by oxidative addition of hydrosilane or aryl iodide through three different mechanisms characterized by intermediates R₃Si−Pd^II−H (Cycle A), Ar−Pd^II−I (Cycle B), and Pd^IV (Cycle C), have been explored in detail by hybrid DFT. Calculations suggest that the chemical selectivity and reactivity of the reaction depend on the ligation state of the catalyst and specific reaction conditions, including feeding order of substrates and the presence of base. For less bulky biligated catalyst, Cycle C is energetically favored over Cycle A, through which the silylation process is slightly favored over the reduction process. Interestingly, for bulky monoligated catalyst, Cycle B is energetically more favored over generally accepted Cycle A, in which the silylation channel is slightly disfavored in comparison to that of the reduction channel. Moreover, the inclusion of base in this channel allows the silylated product become dominant. These findings offer a good explanation for the complex experimental observations. Designing a reaction process that allows the oxidative addition of palladium(0) complex to aryl iodide to occur prior to that with hydrosilane is thus suggested to improve the reactivity and chemoselectivity for the silylated product by encouraging the catalytic cycle to proceed through Cycles B (monoligated Pd⁰ catalyst) or C (biligated Pd⁰ catalyst), instead of Cycle A.     

Palladium‐Catalyzed Cyclopropanation of Alkenyl Silanes by Diazoalkanes: Evidence for a Pd0 Mechanism

Pd ⁰ does the trick! Alkenyl silanes are efficiently cyclopropanated by diazoalkanes at low Pd loadings (see scheme). Clear evidence for the involvement of a Pd⁰ resting state for this reaction is given.