Structural and Magnetic Properties of 3d Transition‐Metal‐Atom Adsorption on Perfect and Defective Graphene: A Density Functional Theory Study

We systematically investigate the interactions and magnetic properties of a series of 3d transition‐metal (TM; Sc–Ni) atoms adsorbed on perfect graphene (G₆), and on defective graphene with a single pentagon (G₅), a single heptagon (G₇), or a pentagon–heptagon pair (G₅₇) by means of spin‐polarized density functional calculations. The TM atoms tend to adsorb at hollow sites of the perfect and defective graphene, except for G₆Cr, G₅Cr, and G₅Ni. The binding energies of TMs on defective graphene are remarkably enhanced and show a V‐shape, with G_NCr and G_NMn having the lowest binding energies. Furthermore, complicated element‐ and defect‐dependent magnetic behavior is observed in G_NTM. Particularly, the magnetic moments of G_NTM linearly increase by about 1 μ_B and follow a hierarchy of G₇TM<G₅₇TM<G₅TM as the TM varies from Sc to Mn, and the magnetic moments begin to decrease afterward; by choosing different types of defects, the magnetic moments can be tuned over a broad range, for example, from 3 to 6 μ_B for G_NCr. The intriguing element‐ and defect‐dependent magnetic behavior is further understood from electron‐ and back‐donation mechanisms.     

Metal‐Free Reduction of CO2 with Hydroboranes: Two Efficient Pathways at Play for the Reduction of CO2 to Methanol

Guanidines and amidines prove to be highly efficient metal‐free catalysts for the reduction of CO₂ to methanol with hydroboranes such as 9‐borabicyclo[3.3.1]nonane (9‐BBN) and catecholborane (catBH). Nitrogen bases, such as 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene (TBD), 7‐methyl‐1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene (Me‐TBD), and 1,8‐diazabicycloundec‐7‐ene (DBU), are active catalysts for this transformation and Me‐TBD can catalyze the reduction of CO₂ to methoxyborane at room temperature with TONs and TOFs of up to 648 and 33 h^?1 (25 °C), respectively. Formate HCOOBR₂ and acetal H₂C(OBR₂)₂ derivatives have been identified as reaction intermediates in the reduction of CO₂ with R₂BH, and the first C?H‐bond formation is rate determining. Experimental and computational investigations show that TBD and Me‐TBD follow distinct mechanisms. The N?H bond of TBD is reactive toward dehydrocoupling with 9‐BBN and affords a novel frustrated Lewis pair (FLP) that can activate a CO₂ molecule and form the stable adduct 2 , which is the catalytically active species and can facilitate the hydride transfer from the boron to the carbon atoms. In contrast, Me‐TBD promotes the reduction of CO₂ through the activation of the hydroborane reagent. Detailed DFT calculations have shown that the computed energy barriers for the two mechanisms are consistent with the experimental findings and account for the reactivity of the different boron reductants.     

Electronic Properties of Transition‐Metal‐Decorated Silicene

The electronic properties of 3d transition metal (TM)‐decorated silicene were investigated by using density functional calculations in an attempt to replace graphene in electronic applications, owing to its better compatibility with Si‐based technology. Among the ten types of TM‐doped silicene (TM–silicene) studied, Ti‐, Ni‐, and Zn‐doped silicene became semiconductors, whereas Co and Cu doping changed the substrate to a half‐metallic material. Interestingly, in cases of Ti‐ and Cu‐doped silicene, the measured band gaps turned out to be significantly larger than the previously reported band gap in silicene. The observed band‐gap openings at the Fermi level were induced by breaking the sublattice symmetry caused by two structural changes, that is, the Jahn–Teller distortion and protrusion of the TM atom. The present calculation of the band gap in TM–silicene suggests useful guidance for future experiments to fabricate various silicene‐based applications such as a field‐effect transistor, single‐spin electron source, and nonvolatile magnetic random‐access memory.     

Mechanism of the Transition‐Metal‐Catalyzed Hydroarylation of Bromo‐Alkynes Revisited: Hydrogen versus Bromine Migration

A comprehensive mechanistic study of the InCl₃‐, AuCl‐, and PtCl₂‐catalyzed cycloisomerization of the 2‐(haloethynyl)biphenyl derivatives of Fürstner et al. was carried out by DFT/M06 calculations to uncover the catalyst‐dependent selectivity of the reactions. The results revealed that the 6‐endo‐dig cyclization is the most favorable pathway in both InCl₃‐ and AuCl‐catalyzed reactions. When AuCl is used, the 9‐bromophenanthrene product could be formed by consecutive 1,2‐H/1,2‐Br migrations from the Wheland‐type intermediate of the 6‐endo‐dig cyclization. However, in the InCl₃‐catalyzed reactions, the chloride‐assisted intermolecular H‐migrations between two Wheland‐type intermediates are more favorable. These Cl‐assisted H‐migrations would eventually lead to 10‐bromophenanthrene through proto‐demetalation of the aryl indium intermediate with HCl. The cause of the poor selectivity of the PtCl₂ catalyst in the experiments by the Fürstner group was predicted. It was found that both the PtCl₂‐catalyzed alkyne–vinylidene rearrangement and the 5‐exo‐dig cyclization pathways have very close activation energies. Further calculations found the former pathway would lead eventually to both 9‐ and 10‐bromophenanthrene products, as a result of the Cl‐assisted H‐migrations after the cyclization of the Pt–vinylidene intermediate. Alternatively, the intermediate from the 5‐exo‐dig cyclization would be transformed into a relatively stable Pt–carbene intermediate irreversibly, which could give rise to the 9‐alkylidene fluorene product through a 1,2‐H shift with a 28.1 kcal mol^?1 activation barrier. These findings shed new light on the complex product mixtures of the PtCl₂‐catalyzed reaction.     

Interactions of Isonitriles with Metal–Boron Bonds: Insertions,Coupling, Ring Formation,and Liberation of Monovalent Boron

Boryl, borylene, and base‐stabilized borylene complexes of manganese and iron undergo a range of different reactions when treated with isonitriles including single, double, and partial isonitrile insertions into metal?boron bonds, ring formation, isonitrile coupling, and the liberation of new monovalent boron species. Two of the resulting cyclic species have also been found to react selectively with anhydrous HCl to form ring‐opened products. The diverse isonitrile‐promoted reactivity of transition‐metal–boron compounds has been explored computationally.     

Effect of Sodium Cation on Metallacycle β‐Hydride Elimination in CO2–Ethylene Coupling to Acrylates

The catalytic conversion of carbon dioxide and olefins into acrylates has been a long standing target, because society attempts to synthesize commodity chemicals in a more economical and sustainable fashion. Although nickel complexes have been known to successfully couple CO₂ and ethylene for decades, a key β‐hydride elimination step has proven a major obstacle to the development of a catalytic process. Recent studies have shown that Lewis acid additives can be used to create a lower‐energy pathway for β‐hydride elimination and facilitate a low number of catalytic turnovers. However, the exact manner, in which the Lewis acid promotes β‐hydride elimination remains to be elucidated. Herein, we describe the kinetic and thermodynamic role that commercially relevant and weakly Lewis acidic sodium salts play in promoting β‐hydride elimination from nickelalactones synthesized from CO₂ and ethylene. This process is compared to a non‐Lewis acid promoted pathway, and DFT calculations were used to identify differences between the two systems. The sodium‐free isomerization reaction gave a rare CO₂‐derived β‐nickelalactone complex, which was structurally characterized.     

Transition‐Metal‐Free Tunable Chemoselective N Functionalization of Indoles with Ynamides

Two unprecedented N functionalizations of indoles with ynamides are described. By varying the electron‐withdrawing group on the ynamide nitrogen atom, either Z‐indolo‐etheneamides or indolo‐amidines can be selectively obtained under the same metal‐free reaction conditions. The scope and synthetic potential of these reactions, as well as some mechanistic insights provided by DFT calculations, are reported.     

Activation of CS2 and CO2 by Silylium Cations

The hydride-bridged silylium cation [Et₃Si−H−SiEt₃]⁺, stabilized by the weakly coordinating [Me₃NB₁₂Cl₁₁]⁻ anion, undergoes, in the presence of excess silane, a series of unexpected consecutive reactions with the valence-isoelectronic molecules CS₂ and CO₂. The final products of the reaction with CS₂ are methane and the previously unknown [(Et₃Si)₃S]⁺ cation. To gain insight into the entire reaction cascade, numerous experiments with varying conditions were performed, intermediate products were intercepted, and their structures were determined by X-ray crystallography. Besides the [(Et₃Si)₃S]⁺ cation as the final product, crystal structures of [(Et₃Si)₂SMe]⁺, [Et₃SiS(H)Me]⁺, and [Et₃SiOC(H)OSiEt₃]⁺ were obtained. Experimental results combined with supporting quantum-chemical calculations in the gas phase and solution allow a detailed understanding of the reaction cascade.     

First‐Row Transition‐Metal–Diborane and –Borylene Complexes

A combined experimental and quantum chemical study of Group 7 borane, trimetallic triply bridged borylene and boride complexes has been undertaken. Treatment of [{Cp*CoCl}₂] (Cp*=1,2,3,4,5‐pentamethylcyclopentadienyl) with LiBH₄ ? thf at ?78 °C, followed by room‐temperature reaction with three equivalents of [Mn₂(CO)₁₀] yielded a manganese hexahydridodiborate compound [{(OC)₄Mn}(η⁶‐B₂H₆){Mn(CO)₃}₂(μ‐H)] ( 1 ) and a triply bridged borylene complex [(μ₃‐BH)(Cp*Co)₂(μ‐CO)(μ‐H)₂MnH(CO)₃] ( 2 ). In a similar fashion, [Re₂(CO)₁₀] generated [(μ₃‐BH)(Cp*Co)₂(μ‐CO)(μ‐H)₂ReH(CO)₃] ( 3 ) and [(μ₃‐BH)(Cp*Co)₂(μ‐CO)₂(μ‐H)Co(CO)₃] ( 4 ) in modest yields. In contrast, [Ru₃(CO)₁₂] under similar reaction conditions yielded a heterometallic semi‐interstitial boride cluster [(Cp*Co)(μ‐H)₃Ru₃(CO)₉B] ( 5 ). The solid‐state X‐ray structure of compound 1 shows a significantly shorter boron–boron bond length. The detailed spectroscopic data of 1 and the unusual structural and bonding features have been described. All the complexes have been characterized by using ¹H, ¹¹B, ¹³C NMR spectroscopy, mass spectrometry, and X‐ray diffraction analysis. The DFT computations were used to shed light on the bonding and electronic structures of these new compounds. The study reveals a dominant B?H?Mn, a weak B?B?Mn interaction, and an enhanced B?B bonding in 1 .     

CO2 Conversion into Esters by Fluoride‐Mediated Carboxylation of Organosilanes and Halide Derivatives

A one‐step conversion of CO₂ into heteroaromatic esters is presented under metal‐free conditions. Using fluoride anions as promoters for the C?Si bond activation, pyridyl, furanyl, and thienyl organosilanes are successfully carboxylated with CO₂ in the presence of an electrophile. The mechanism of this unprecedented reaction has been elucidated based on experimental and computational results, which show a unique catalytic influence of CO₂ in the C?Si bond activation of pyridylsilanes. The methodology is applied to 18 different esters, and it has enabled the incorporation of CO₂ into a polyester material for the first time.     

Co‐Adsorption of O2 and CO on Au2−: Infrared Photodissociation Spectroscopy and Theoretical Study of [Au2O2(CO)n]− (n=2–6)

The co‐adsorption of O₂ and CO on anionic sites of gold species is considered as a crucial step in the catalytic CO oxidation on gold catalysts. In this regard, the [Au₂O₂(CO)_n]^? (n=2–6) complexes were prepared by using a laser vaporization supersonic ion source and were studied by using infrared photodissociation spectroscopy in the gas phase. All the [Au₂O₂(CO)_n]^? (n=2–6) complexes were characterized to have a core structure involving one CO and one O₂ molecule co‐adsorbed on Au₂^? with the other CO molecules physically tagged around. The CO stretching frequency of the [Au₂O₂(CO)]^? core ion is observed around =2032–2042 cm^?1, which is about 200 cm^?1 higher than that in [Au₂(CO)₂]^?. This frequency difference and the analyses based on density functional calculations provide direct evidence for the synergy effect of the chemically adsorbed O₂ and CO. The low lying structures with carbonate group were not observed experimentally because of high formation barriers. The structures and the stability (i.e., the inertness in a sense) of the co‐adsorbed O₂ and CO on Au₂^? may have relevance to the elementary reaction steps on real gold catalysts.     

Conversion of CO2 and C2H6 to Propanoic Acid over a Au‐Exchanged MCM‐22 Zeolite

Finding novel catalysts for the direct conversion of CO₂ to fuels and chemicals is a primary goal in energy and environmental research. In this work, density functional theory (DFT) is used to study possible reaction mechanisms for the conversion of CO₂ and C₂H₆ to propanoic acid over a gold‐exchanged MCM‐22 zeolite catalyst. The reaction begins with the activation of ethane to produce a gold ethyl hydride intermediate. Hydrogen transfers to the framework oxygen leads then to gold ethyl adsorbed on the Brønsted‐acid site. The energy barriers for these steps of ethane activation are 9.3 and 16.3 kcal mol^?1, respectively. Two mechanisms of propanoic acid formation are investigated. In the first one, the insertion of CO₂ into the Au?H bond of the first intermediate yields gold carboxyl ethyl as subsequent intermediate. This is then converted to propanoic acid by forming the relevant C?C bond. The activation energy of the rate‐determining step of this pathway is 48.2 kcal mol^?1. In the second mechanism, CO₂ interacts with gold ethyl adsorbed on the Brønsted‐acid site. Propanoic acid is formed via protonation of CO₂ by the Brønsted acid and the simultaneous formation of a bond between CO₂ and the ethyl group. The activation energy there is 44.2 kcal mol^?1, favoring this second pathway at least at low temperatures. Gold‐exchanged MCM‐22 zeolite can therefore, at least in principle, be used as the catalyst for producing propanoic acid from CO₂ and ethane.     

CO2吸附活化的研究进展

本文分析讨论了CO₂ 在金属催化剂和金属氧化物催化剂上吸附活化的机理及活化吸附态的反应性能, 提出了CO₂ 作为一种温和氧化剂在化工生产中加以综合利用的有效途径。     

Reactivity of Graphene and Hexagonal Boron Nitride In‐Plane Heterostructures with Oxygen: A DFT Study

A density‐functional study has been undertaken to investigate the chemical properties of in‐plane heterostructures of graphene and hexagonal boron nitride. The interactions of armchair and zigzag linking edges with oxygen are looked at in detail. The results of the calculations indicate that the linking edges are highly reactive to oxygen atoms and predict that oxygen molecules can accordingly be adsorbed dissociatively. Furthermore, because oxygen atoms cooperatively interact with the heterostructures, the process can lead to opening of the linking edges, thus splitting the two materials.     

First‐Principles Study toward CO Adsorption on Au/Ni Surface Alloys

The introduction of a second metal, gold, into a nickel matrix can effectively improve the catalytic performance and thermal stability of the catalysts toward steam reforming of methane. To investigate the effect of Au on the adsorption properties and electronic structure of the Ni(111) surface, we chose CO as a probe molecule and examined CO adsorption on various Au/Ni surfaces. It was revealed that Au addition weakened the absorbate–substrate interactions on the Ni(111) surface. With increasing gold concentration, the binding energy declines further. The variation of the binding energies has been interpreted by exploring the electronic structure of surface nickel atoms. The effect of gold can be quantitatively characterized by the slopes of the fitting equations between the binding energy and the number of gold atoms surrounding the adsorption site. Our results show that the binding energy at top sites can be approximately estimated by counting the number of surrounding gold atoms. On one specific surface, the relative magnitude of the binding energy can be simply judged by the distance between gold and the geometrical center of the adsorption site. This empirical rule holds true for C, H, and O adsorption on the Au/Ni surface. It may be applicable to a system in which a doped atom of larger atomic size is incorporated into the host metal surface by forming a surface alloy.