Microwave‐Hydrothermal Preparation and Visible‐Light Photoactivity of Plasmonic Photocatalyst Ag‐TiO2 Nanocomposite Hollow Spheres

Visible‐light‐driven plasmonic photocatalyst Ag‐TiO₂ nanocomposite hollow spheres are prepared by a template‐free chemically‐induced self‐transformation strategy under microwave‐hydrothermal conditions, followed by a photochemical reduction process under xenon lamp irradiation. The prepared samples are characterized by using scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, N₂ adsorption‐desorption isotherms, X‐ray photoelectron spectroscopy, UV/Vis and Raman spectroscopy. Production of ?OH radicals on the surface of visible‐light illuminated TiO₂ was detected by using a photoluminescence method with terephthalic acid as the probe molecule. The photocatalytic activity of as‐prepared samples was evaluated by photocatalytic decolorization of Rhodamine B (RhB) aqueous solution at ambient temperature under visible‐light irradiation. The results show that the surface plasmon absorption band of the silver nanoparticles supported on the TiO₂ hollow spheres was red shifted, and a strong surface enhanced Raman scattering effect for the Ag‐TiO₂ nanocomposite sample was observed. The prepared nanocomposite hollow spheres exhibits a highly visible‐light photocatalytic activity for photocatalytic degradation of RhB in water, and their photocatalytic activity is higher than that of pure TiO₂ and commercial Degussa P25 (P25) powders. Especially, the as‐prepared Ag‐TiO₂ nanocomposite hollow spheres at the nominal atomic ratio of silver to titanium ( R ) of 2 showed the highest photocatalytic activity, which exceeds that of P25 by a factor of more than 2.     

Fabrication of nanoporous polymeric crystalline TiO2 composite for photocatalytic degradation of aqueous organic pollutants under visible light irradiation

A nanoporous polymeric crystalline TiO₂ composite (TiO₂/PDVB‐MA) has been successfully synthesized through an in situ synthesis method using divinylbenzene (DVB), methacrylic acid (MA) and tetrabutyl titanate. The experimental results showed that TiO₂ nanoparticles composed of the mixture phases of anatase and rutile were homogeneously dispersed into the PDVB‐MA support. The TiO₂/PDVB‐MA composite was used as photocatalyst for Rhodamine B (RhB), bisphenol A and 2,4,6‐trichlorophenol degradation under visible light irradiation. More interestingly, the excellent photocatalytic performance of the composite was observed with regard to RhB and bisphenol A, which might be ascribed to the synergistic effect between TiO₂ nanoparticles and PDVB‐MA. Moreover, TiO₂/PDVB‐MA composite could be recycled at least four times in the removal of RhB, suggesting that it is a promising photocatalyst to catalyze the degradation of organic pollutants under visible light irradiation.     

Production of Hydrogen by Glycerol Photoreforming Using Binary Nitrogen–Metal‐Promoted N‐M‐TiO2 Photocatalysts

The need for renewable energy focuses attention on hydrogen obtained by using sustainable and green methods. The sustainable compound glycerol can be used for hydrogen production by heterogeneous photocatalysis. A novel approach involves the promotion of the TiO₂ photocatalyst with a binary combination of nitrogen and transition metal. We report the synthesis and spectroscopic characterization of the new N‐M‐TiO₂ photocatalysts (M=none, Cr, Co, Ni, Cu), and the photocatalytic reforming of glycerol to hydrogen under ambient conditions and near‐UV or visible light versus benchmark P25 TiO₂. In units of activity μmol m^?2 h^?1, N‐Ni‐TiO₂ is five‐fold more active than P25, and N‐Cu‐TiO₂ is 44‐fold more active. The photocatalytic activity of N‐M‐TiO₂ increases from Cr to Co and Ni, whereas the photoluminescence decreases; the change in activity is due to the modulation of charge recombination.     

Improving the Photocatalytic Activity of Modified Anatase TiO2 with Different Concentrations of Aluminum under Visible Light: Mechanistic Survey

Visible light‐driven Al‐doped TiO₂ with different aluminum contents (2, 5 and 10 mol%) were synthesized via a facile sol–gel method. Fourier transform infrared (FTIR), UV‐visible diffuse reflectance, energy dispersive X‐ray (EDX) spectroscopy as well as X‐ray diffraction (XRD), X‐ray fluorescence (XRF) and scanning electron microscopy (SEM) methods were used for the characterization of the obtained nanoparticles. The photocatalytic performance of the samples was evaluated by the degradation of rhodamine B (RhB) under visible light irradiation. The yield of the degradation RhB was estimated to be 71%, 89%, 65% and 56%, for the bare TiO₂, 2%, 5% and 10% Al‐doped TiO₂, respectively. It was found that 2 mol% of Al‐doped TiO₂ shows the best photocatalytic performance. In low concentration of dopant, separation of photogenerated electron–hole pairs promoted, and subsequently, the degradation efficiency increased. It was proposed that the degradation of RhB by 2 mol% Al‐doped TiO₂ photocatalyst follows both N‐deethylation and chromophore cleavage mechanisms, while the N‐deethylation still predominated over cleavage of dye chromophore structure. The key role of hydroxyl radicals in RhB degradation was verified by the effects of scavengers. In addition, the photocatalyst can be reused for three runs without any significant loss of its catalytic activity.     

Three‐Dimensional Ordered Assembly of Thin‐Shell Au/TiO2 Hollow Nanospheres for Enhanced Visible‐Light‐Driven Photocatalysis

An Au/TiO₂ nanostructure was constructed to obtain a highly efficient visible‐light‐driven photocatalyst. The design was based on a three‐dimensional ordered assembly of thin‐shell Au/TiO₂ hollow nanospheres (Au/TiO₂‐3 DHNSs). The designed photocatalysts exhibit not only a very high surface area but also photonic behavior and multiple light scattering, which significantly enhances visible‐light absorption. Thus Au/TiO₂‐3 DHNSs exhibit a visible‐light‐driven photocatalytic activity that is several times higher than conventional Au/TiO₂ nanopowders.     

A Simple Method for the Preparation of TiO2/Ag‐AgCl@Polypyrrole Composite and Its Enhanced Visible‐Light Photocatalytic Activity

A novel and facile method was developed to prepare a visible‐light driven TiO₂/Ag‐AgCl@polypyrrole (PPy) photocatalyst with Ag‐AgCl nanoparticles supported on TiO₂ nanofibers and covered by a thin PPy shell. During the synthesis, the PPy shell and Ag‐AgCl nanoparticles were prepared simultaneously onto TiO₂ nanofibers, which simplified the preparation procedure. In addition, because Ag‐AgCl aggregates were fabricated via partly etching the Ag nanoparticles, their size was well controlled at the nanoscale, which was beneficial for improvement of the contact surface area. Compared with reference photocatalysts, the TiO₂/Ag‐AgCl@PPy composite exhibited an enhanced photodegradation activity towards rhodamine B under visible‐light irradiation. The superior photocatalytic property originated from synergistic effects between TiO₂ nanofibers, Ag‐AgCl nanoparticles and the PPy shell. Furthermore, the TiO₂/Ag‐AgCl@PPy composite could be easily separated and recycled without obvious reduction in activity.     

Constructing Ordered Three‐Dimensional TiO2 Channels for Enhanced Visible‐Light Photocatalytic Performance in CO2 Conversion Induced by Au Nanoparticles

As a typical photocatalyst for CO₂ reduction, practical applications of TiO₂ still suffer from low photocatalytic efficiency and limited visible‐light absorption. Herein, a novel Au‐nanoparticle (NP)‐decorated ordered mesoporous TiO₂ (OMT) composite (OMT‐Au) was successfully fabricated, in which Au NPs were uniformly dispersed on the OMT. Due to the surface plasmon resonance (SPR) effect derived from the excited Au NPs, the TiO₂ shows high photocatalytic performance for CO₂ reduction under visible light. The ordered mesoporous TiO₂ exhibits superior material and structure, with a high surface area that offers more catalytically active sites. More importantly, the three‐dimensional transport channels ensure the smooth flow of gas molecules, highly efficient CO₂ adsorption, and the fast and steady transmission of hot electrons excited from the Au NPs, which lead to a further improvement in the photocatalytic performance. These results highlight the possibility of improving the photocatalysis for CO₂ reduction under visible light by constructing OMT‐based Au‐SPR‐induced photocatalysts.     

N‐Doped Yellow TiO2 Hollow Sphere‐Mediated Visible‐Light‐Driven Efficient Esterification of Alcohol and N‐Hydroxyimides to Active Esters

Herein we report a simple synthetic protocol for N‐doped yellow TiO₂ (N‐TiO₂) hollow spheres as an efficient visible‐light‐active photocatalyst using aqueous titanium peroxocarbonate complex (TPCC) solution as precursor and NH₄OH. In the developed strategy, the ammonium ion of TPCC and NH₄OH acts as nitrogen source and structure‐directing agent. The synthesized N‐TiO₂ hollow spheres are capable of promoting the synthesis of active esters of N‐hydroxyimide and alcohol through simultaneous selective oxidation of alcohol to aldehyde followed by cross‐dehydrogenative coupling (CDC) under ambient conditions upon irradiation of visible light. It is possible to develop a novel and cost‐effective one‐pot strategy for the synthesis of important esters and amides on gram scale using the developed strategy. The catalytic activity of N‐TiO₂ hollow spheres is much superior to that of other reported N‐TiO₂ samples as well as TiO₂ with varying morphology.     

钯氮共掺杂TiO2的制备与表征及其可见光催化活性

在空气气氛和N₂中热处理表面均匀分散有尿素和氯化钯的纳米管钛酸,制备了两个系列Pd/N共掺杂的TiO₂光催化剂,并对所得样品进行了X射线衍射、透射电镜、X射线光电子能谱、紫外-可见漫反射光谱、荧光光谱和电子自旋共振等表征.结果表明,焙烧气氛对样品的形貌、晶体结构、光谱吸收、生成的氧空位浓度和可见光光催化性能的影响很大,其中在空气气氛中制备的样品光催化性能优于在N₂中制备的样品.在可见光(λ≥420nm)照射下,以丙烯为模型污染物考察了样品的光催化活性,发现在空气中400℃下焙烧的样品具有最佳的可见光催化活性.另外,讨论了Pd/N共掺杂TiO₂光催化剂具有可见光响应的机理,认为掺杂的Pd/N元素和制备过程中生成的氧空位是影响可见光催化性能的重要因素.     

Effective band gap reduction of titanium oxide semiconductors by codoping from first‐principles calculations

Doping is an efficient approach to narrow the band gap of TiO₂ and enhance its photocatalytic activity. Here, we perform generalized gradient approximation (GGA)+U calculations to narrow the band gap of TiO₂ by codoping of X (F, N) with transition metals (TM = Fe, Co) to extend the absorption edge to longer visible‐light wavelengths. Our results show that all the codoped systems can narrow the band gap significantly, in particular, (F+Fe)‐codoped system could serve as remarkably better photocatalysts with both narrowing of the band gap and relatively smaller formation energies than those of (F+Co) and (N+TM)‐codoped systems. Our results provide useful guidance for codoped TiO₂ efficient for photocatalytic activity. © 2013 Wiley Periodicals, Inc.     

Direct Synthesis of Hexagonal NaGdF4 Nanocrystals from a Single‐Source Precursor: Upconverting NaGdF4:Yb3+,Tm3+ and Its Composites with TiO2 for Near‐IR‐Driven Photocatalysis

A novel single‐source precursor NaGd(TFA)₄(diglyme) (TFA=trifluoroacetate) was synthesized, characterized thoroughly, and used to obtain the hexagonal phase of NaGdF₄ nanoparticles as an efficient matrix for lanthanide‐doped upconverting nanocrystals (NCs) that convert near‐infrared radiation into shorter‐wavelength UV/visible light. These NCs were then used to prepare well‐characterized TiO₂@NaGdF₄:Yb³⁺,Tm³⁺ nanocomposites to extend the absorption range of the TiO₂ photocatalyst from the UV to the IR region. While the visible/near IR part of the photoluminescent spectra remains almost unaffected by the presence of TiO₂, the UV part is strongly quenched due to the absorption of TiO₂ above its gap at approximately 380 nm by energy transfer or FRET. Preliminary results on the photocatalytic activity of the above obtained nanocomposites are presented.     

BiOCl/UiO‐66 composite with enhanced performance for photo‐assisted degradation of dye from water

Semiconductor‐based photocatalysis is an environmental friendly and cost‐effective technique for water treatment. Due to their unique properties, metal–organic frameworks (MOFs) are considered as ideal platform to develop composite photocatalyst. In this study, Bismuth oxychloride (BiOCl) was first attempt to be incorporated with highly stable MOFs, UiO‐66(Zr) by hydrothermal reaction. Different characterization methods including X‐ray diffraction, Scanning electron microscopy, Fourier transform infrared spectroscope, X‐ray photoelectron spectroscopy had been used to prove the successful synthesis of composite photocatalyst. The resultant BiOCl/UiO‐66 composite showed higher photodegradation performance of Rhodamine B (RhB) under ultraviolet and visible light irradiation than that of pristine materials and their mechanically mixed sample. In addition, the composite exhibited good structural stability and reusability. The photocatalytic mechanism of RhB degradation over the composite under visible light proceeded via a photosensitization process. A better adsorptivity of RhB and effective electron transfer within the hybrid material might be responsible for the enhanced photocatalytic performance.     

Template‐free Fabrication of Hierarchical Macro‐/mesoporous N‐doped TiO2/graphene Oxide Composites with Enhanced Visible‐light Photocatalytic Activity

Hierarchical macro‐/mesoporous N‐doped TiO₂/graphene oxide (N‐TiO₂/GO) composites were prepared without using templates by the simple dropwise addition mixed solution of tetrabutyl titanate and ethanol containg graphene oxide (GO) to the ammonia solution, and then calcined at 350 °C. The as‐prepared samples were characterized by scanning electron microscopy (SEM), Brunauer‐Emmett‐Teller (BET) surface area, X‐ray diffraction (XRD), Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), and UV‐Vis absorption spectroscopy. The photocatalytic activity was evaluated by the photocatalytic degradation of methyl orange in an aqueous solution under visible‐light irradiation. The results show that N‐TiO₂/GO composites exhibited enhanced photocatalytic activity. GO content exhibited an obvious influence on photocatalytic performance, and the optimal GO addition content was 1 wt%. The enhanced photocatalytic activity could be attributed to the synergetic effects of three factors including the improved visible light absorption, the hierarchical macro‐mesoporous structure, and the efficient charge separation by GO.     

Synthesis and Studies of the Visible‐Light Photocatalytic Properties of Near‐Monodisperse Bi‐Doped TiO2 Nanospheres

Near‐monodisperse Bi‐doped anatase TiO₂ nanospheres with almost uniform diameters in the range of 117 to 87 nm were prepared simply by introducing different amounts of bismuth nitrate pentahydrate into the reaction system and subsequent calcinations. X‐ray diffraction, UV‐visible diffuse reflectance spectra, and X‐ray photoelectron spectroscopy confirm that the doped ions substitute some of the lattice titanium atoms, and furthermore, Bi³⁺ and Bi⁴⁺ ions coexist. All the Bi‐doped TiO₂ samples show much better photocatalytic activity than pure TiO₂ in the degradation of rhodamine B (RhB) under the irradiation of visible light (λ>420 nm), and, interestingly, it was found that the degradation mechanism is different from the conventional one, which has already been reported elsewhere. The detailed mechanism is discussed in this article.     

Bi‐, Y‐Codoped TiO2 for Carbon Dioxide Photocatalytic Reduction to Formic Acid under Visible Light Irradiation

Bi‐ and Y‐codoped TiO₂ photocatalysts were synthesized through a sol‐gel method, and they were applied in the photocatalytic reduction of CO₂ to formic acid under visible light irradiation. The results revealed that, after doping Bi and Y, the surface area of TiO₂ was increased from 5.4 to 93.1 m²/g when the mole fractions of doping Bi and Y were 1.0% and 0.5%, respectively, and the lattice structures of the photocatalysts changed and the oxygen vacancies on the surface of the photocatalysts formed, which would act as the electron capture centers and slow down the recombination of photo‐induced electron and hole. The photocurrent spectra also proved that the photocatalysts had better electronic transmission capacities. The HCOOH yield in CO₂ photocatalytic reduction was 747.82 μmol/g_cat by using 1% Bi‐0.5% Y‐TiO₂ as a photocatalyst. The HCOOH yield was 1.17 times higher than that by using 1% Bi‐TiO₂, and 2.23 times higher than that by using pure TiO₂. Furthermore, the 1% Bi‐0.5% Y‐TiO₂ showed the highest apparent quantum efficiency (AQE) of 4.45%.     

Li‐doped nanosized TiO2 powder with enhanced photocalatylic acivity under sunlight irradiation

This work reports on the synthesis of Li‐doped TiO₂ nanoparticles using the sol–gel process and solid‐state sintering, and investigates their potential use as a photocatalyst for degradation under sunlight excitation of different organic model compounds in aqueous solution. The structure of the nanocrystals was examined by X‐ray diffraction, UV‐vis ground state diffuse reflectance absorption spectra and X‐ray photoelectron emission spectroscopy. Results showed that samples prepared by sol–gel process and calcined at 400 °C are composed of a mixture of anatase and rutile phases, in contrast to the one prepared by solid‐state sintering, which exhibits an anatase phase with Li being involved in a spinel phase. The photocatalytic degradation of aqueous solutions of different aromatic compounds was successfully achieved under sunlight excitation in presence of Li‐doped TiO₂ prepared via sol–gel process. It was shown that the calcination temperature and the preparation mode greatly affect the photocatalytic efficiency. Copyright © 2010 John Wiley & Sons, Ltd.     

Study of the Efficiency of UV and Visible‐Light Photocatalytic Oxidation of Methanol on Mesoporous RuO2–TiO2 Nanocomposites

Mesoporous RuO₂–TiO₂ nanocomposites at different RuO₂ concentrations (0–10 wt %) are prepared through a simple one‐step sol–gel reaction of tetrabutyl orthotitanate with ruthenium(III) acetylacetonate in the presence of an F127 triblock copolymer as structure‐directing agent. The thus‐formed RuO₂–TiO₂ network gels are calcined at 450 °C for 4 h leading to mesoporous RuO₂–TiO₂ nanocomposites. The photocatalytic CH₃OH oxidation to HCHO is chosen as the test reaction to examine the photocatalytic activity of the mesoporous RuO₂–TiO₂ nanocomposites under UV and visible light. The photooxidation of CH₃OH is substantially affected by the loading amount and the degree of dispersion of RuO₂ particles onto the TiO₂, which indicates the exclusive effect of the RuO₂ nanoparticles on this photocatalytic reaction under visible light. The measured photonic efficiency ξ=0.53 % of 0.5 wt % RuO₂–TiO₂ nanocomposite for CH₃OH oxidation is maximal and the further increase of RuO₂ loading up to 10 wt % gradually decreases this value. The cause of the visible‐light photocatalytic behavior is the incorporation of small amounts of Ru⁴⁺ into the anatase lattice. On the other hand, under UV light, undoped TiO₂ shows a very good photonic efficiency, which is more than three times that for commercial photocatalyst, P‐25 (Evonik–Degussa); however, addition of RuO₂ suppresses the photonic efficiency of TiO₂. The proposed reaction mechanism based on the observed behavior of RuO₂–TiO₂ photocatalysts under UV and visible light is explored.     

Simple preparation of Mn–N-codoped titania photocatalyst with visible light response

Mn–N-codoped TiO₂ nanocrystal photocatalysts responsive to visible light were synthesized for the first time by a simple hydrothermal synthesis method. X-ray powder diffraction (XRD) measurement indicated that all the photocatalysts have an anatase crystallite structure, and that increase of the doping concentration had little effect on the structure and particle size. Compared to N-doped TiO₂, a shift of the absorption edge of Mn–N-codoped TiO₂ to a lower energy and a stronger absorption in the visible light region were observed. The Mn–N-codoped TiO₂ showed higher photocatalytic reactivity than undoped TiO₂ or N-doped TiO₂ for the photodegradation of rhodamine B (RhB) under visible light irradiation. The highest photocatalytic activity was achieved on 0.4 mol% Mn–N–TiO₂ calcined at 673 K.     

Bandgap Engineering and Mechanism Study of Nonmetal and Metal Ion Codoped Carbon Nitride: C+Fe as an Example

Bandgap narrowing and a more positive valence band (VB) potential are generally considered to be effective methods for improving visible‐light‐driven photocatalysts because of the significant enhancement of visible‐light absorption and oxidation ability. Herein, an approach is reported for the synthesis of a novel visible‐light‐driven high performance polymer photocatalyst based on band structure control and nonmetal and metal ion codoping, that is, C and Fe‐codoped as a model, by a simple thermal conversion method. The results indicate that compared to pristine graphitic carbon nitride (g‐C₃N₄), C+Fe‐codoped g‐C₃N₄ shows a narrower bandgap and remarkable positively shifted VB; as a result the light‐absorption range was expanded and the oxidation capability was increased. Experimental results show that the catalytic efficiency of C+Fe‐codoped g‐C₃N₄ for photodegradation of rhodamine B (RhB) increased 14 times, compared with pristine g‐C₃N₄ under visible‐light absorption at λ>420 nm. The synergistic enhancement in C+Fe‐codoped g‐C₃N₄ photocatalyst could be attributed to the following features: 1) C+Fe‐codoping of g‐C₃N₄ tuned the bandgap and improved visible‐light absorption; 2) the porous lamellar structure and decreased particle size could provide a high surface area and greatly improve photogenerated charge separation and electron transfer; and 3) both increased electrical conductivity and a more positive VB ensured the superior electron‐transport property and high oxidation capability. The results imply that a high‐performance photocatalyst can be obtained by combining bandgap control and doping modification; this may provide a basic concept for the rational design of high performance polymer photocatalysts with reasonable electronic structures for unique photochemical reaction.     

Visible‐light‐driven self‐cleaning SERS substrate of silver nanoparticles and graphene oxide decorated nitrogen‐doped titania nanotube array

Graphene oxide (GO) and silver nanoparticles (Ag NPs) sequentially decorated nitrogen‐doped titania nanotube array (N‐TiO₂ NTA) had been designed as visible‐light‐driven self‐cleaning surface‐enhanced Raman scattering (SERS) substrate for a recyclable SERS detection application. N‐TiO₂ NTA was fabricated by anodic oxidation and then doping nitrogen treatment in ammonia atmosphere, acting as a visible‐light‐driven photocatalyst and supporting substrate. Ag/GO/N‐TiO₂ NTA was prepared by decorating GO monolayer through an impregnation process and then depositing Ag NPs through a polyol process on the surface of N‐TiO₂ NTA, acting as the collection of organic molecule and Raman enhancement. The SERS activity of Ag/GO/N‐TiO₂ NTA was evaluated using methyl blue as an organic probe molecule, revealing the analytical enhancement factor of 4.54 × 10⁴. Ag/GO/N‐TiO₂ NTA was applied as active SERS substrate to determine a low‐affinity organic pollutant of bisphenol A, revealing the detection limit of as low as 5 × 10^?7 m . Ag/GO/N‐TiO₂ NTA could also achieve self‐cleaning function for a recycling utilization through visible‐light‐driven photocatalytic degradation of the adsorbed organic molecules. Ag/GO/N‐TiO₂ NTA has been successfully reused for five times without an obvious decay in accuracy and sensitivity for organic molecule detection. The unique properties of this SERS substrate enable it to have a promising application for the sensitive and recyclable SERS detection of low‐affinity organic molecules. Copyright © 2016 John Wiley & Sons, Ltd.