High‐Silica Zeolite SSZ‐61 with Dumbbell‐Shaped Extra‐Large‐Pore Channels

The synthesis of the high‐silica zeolite SSZ‐61 using a particularly bulky polycyclic structure‐directing agent and the subsequent elucidation of its unusual framework structure with extra‐large dumbbell‐shaped pore openings are described. By using information derived from a variety of X‐ray powder diffraction and electron microscopy techniques, the complex framework structure, with 20 Si atoms in the asymmetric unit, could be determined and the full structure refined. The Si atoms at the waist of the dumbbell are only three‐connected and are bonded to terminal O atoms pointing into the channel. Unlike the six previously reported extra‐large‐pore zeolites, SSZ‐61 contains no heteroatoms in the framework and can be calcined easily. This, coupled with the possibility of inserting a catalytically active center in the channel between the terminal O atoms in place of H⁺, afford SSZ‐61 intriguing potential for catalytic applications.     

A Hierarchical MFI Zeolite with a Two‐Dimensional Square Mesostructure

A conceptual design and synthesis of ordered mesoporous zeolites is a challenging research subject in material science. Several seminal articles report that one‐dimensional (1D) mesostructured lamellar zeolites are possibly directed by sheet‐assembly of surfactants, which collapse after removal of intercalated surfactants. However, except for one example of two‐dimensional (2D) hexagonal mesoporous zeolite, no other zeolites with ordered 2D or three‐dimensional (3D) mesostructures have been reported. An ordered 2D mesoporous zeolite can be templated by a cylindrical assembly unit with specific interactions in the hydrophobic part. A template molecule with azobenzene in the hydrophobic tail and diquaternary ammonium in the hydrophilic head group directs hierarchical MFI zeolite with a 2D square mesostructure. The material has an elongated octahedral morphology, and quaternary, ordered, straight, square channels framed by MFI thin sheets expanded along the a–c planes and joined with 90° rotations. The structural matching between the cylindrical assembly unit and zeolite framework is crucial for mesostructure construction.     

Rapid Synthesis of an Aluminum‐Rich MSE‐Type Zeolite by the Hydrothermal Conversion of an FAU‐Type Zeolite

An aluminum‐rich MSE‐type zeolite (Si/Al is as small as 7) has been successfully synthesized in a remarkably short crystallization period of only 3 days by the hydrothermal conversion of an FAU‐type zeolite, presumably by the assembly of four‐membered‐ring (4‐R) aluminosilicate oligomers supplied by the double 6‐R (D6R) components of the FAU framework with the aid of the structure‐directing agents and seed crystals. The dealuminated version of the aluminum‐rich MSE‐type zeolite showed a high level of coke durability in addition to a significant yield of propylene, which indicates that this novel zeolitic material is suitable for industrial applications as a highly selective and long‐lived catalyst.     

A 3D 12‐Ring Zeolite with Ordered 4‐Ring Vacancies Occupied by (H2O)2 Dimers

A germanate zeolite, PKU‐14, with a three‐ dimensional large‐pore channel system was structurally characterized by a combination of high‐resolution powder X‐ray diffraction, rotation electron diffraction, NMR, and IR spectroscopy. Ordered Ge₄O₄ vacancies inside the [4⁶.6¹²] cages has been found in PKU‐14, in which a unique (H₂O)₂ dimer was located at the vacancies and played a structure‐directing role. It is the first time that water clusters are found to be templates for ordered framework vacancies.     

A Germanosilicate Structure with 11×11×12‐Ring Channels Solved by Electron Crystallography

Zeolites have been widely used in industry owing to their ordered micropores and stable frameworks. The pore sizes and shapes are the key parameters that affect the selectivity and efficiency in their applications in catalysis, sorption, and separation. Zeolites with pores defined by 10 and 12 TO₄ tetrahedra are often used for various catalytic processes. To optimize the performance of zeolites, it is extremely desirable to fine‐tune the pore sizes/shapes. The first germanosilicate zeolite with a three‐dimensional 11×11×12‐ring channel system, PKU‐16 (PKU, Peking University) is presented. Nanosized PKU‐16 was structurally characterized by the new three‐dimensional rotation electron diffraction (RED) technique. PKU‐16 is structurally related to the zeolite β polymorph C (BEC, 12×12×12‐ring channels) by rotating half of the four‐rings in double mtw units.     

Two‐ and Three‐Dimensional Molecular Organization of Schiff‐Base Derivatives

We have designed and synthesized a series of Schiff base derivatives, and studied their structural features in two‐dimensional (2D) and three‐dimensional (3D) states by combining scanning tunneling microscopy (STM) and X‐ray diffraction experiments. The Schiff‐base derivatives with short alkyl chains crystallize easily, which allows a detailed structural analysis by X‐ray diffraction. Due to the strong adsorbate–substrate interactions, those bases with long alkyl chains easily form 2D assemblies on highly oriented pyrolytic graphite (HOPG). The STM images indicate also that the introduction of two methoxy groups into the molecule can change the structure of these 2D assemblies as a result of the increased steric hindrances, for example: the Schiff‐base derivative, bearing both methoxy groups and C₁₆H₃₃ tails, forms 2D Moiré patterns, and an alignment of pairing Schiff‐base molecules may be easily resolved. Conversely, the Schiff base derivative, bearing solely C₁₆H₃₃ tails, forms 2D non‐Moiré patterns. It is demonstrated that the 3D structural features result from the compromise of intermolecular interactions of different molecular moieties. However, there is one more factor, which also governs the 2D structure: the adsorbate‐substrate interaction. The 3D crystal structure may thus help to understand many factors involved in the formation of 2D structures, and would be helpful for designing new molecular assemblies with tailoring functions.     

Phosphatation of Zeolite H‐ZSM‐5: A Combined Microscopy and Spectroscopy Study

A variety of phosphated zeolite H‐ZSM‐5 samples are investigated by using a combination of Fourier transfer infrared (FTIR) spectroscopy, single pulse ²⁷Al, ²⁹Si, ³¹P, ¹H‐³¹P cross polarization (CP), ²⁷Al‐³¹P CP, and ²⁷Al 3Q magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy, scanning transmission X‐ray microscopy (STXM) and N₂ physisorption. This approach leads to insights into the physicochemical processes that take place during phosphatation. Direct phosphatation of H‐ZSM‐5 promotes zeolite aggregation, as phosphorus does not penetrate deep into the zeolite material and is mostly found on and close to the outer surface of the zeolite, acting as a glue. Phosphatation of pre‐steamed H‐ZSM‐5 gives rise to the formation of a crystalline tridymite AlPO₄ phase, which is found in the mesopores of dealuminated H‐ZSM‐5. Framework aluminum species interacting with phosphorus are not affected by hydrothermal treatment. Dealuminated H‐ZSM‐5, containing AlPO₄, retains relatively more framework Al atoms and acid sites during hydrothermal treatment than directly phosphated H‐ZSM‐5.     

Synthesis of 5‐Aminotetrazole‐1 N‐oxide and Its Azo Derivative: A Key Step in the Development of New Energetic Materials

1‐Hydroxy‐5‐aminotetrazole ( 1 ), which is a long‐desired starting material for the synthesis of hundreds of new energetic materials, was synthesized for the first time by the reaction of aqueous hydroxylamine with cyanogen azide. The use of this unique precursor was demonstrated by the preparation of several energetic compounds with equal or higher performance than that of commonly used explosives, such as hexogen (RDX). The prepared compounds, including energetic salts of 1‐hydroxy‐5‐aminotetrazole (hydroxylammonium ( 2 , two polymorphs) and ammonium ( 3 )), azo‐coupled derivatives (potassium ( 5 ), hydroxylammonium ( 6 ), ammonium ( 7 ), and hydrazinium 5,5′‐azo‐bis(1‐N‐oxidotetrazolate ( 8 , two polymorphs)), as well as neutral compounds 5,5′‐azo‐bis(1‐oxidotetrazole) ( 4 ) and 5,5′‐bis(1‐oxidotetrazole)hydrazine ( 9 ), were intensively characterized by low‐temperature X‐ray diffraction, IR, Raman, and multinuclear NMR spectroscopy, elemental analysis, and DSC. The calculated energetic performance, by using the EXPLO5 code, based on the calculated (CBS‐4M) heats of formation and X‐ray densities confirm the high energetic performance of tetrazole‐N‐oxides as energetic materials. Last but not least, their sensitivity towards impact, friction, and electrostatic discharge were explored. 5,5′‐Azo‐bis(1‐N‐oxidotetrazole) deflagrates close to the DDT (deflagration‐to‐detonation transition) faster than all compounds that have been investigated in our research group to date.     

Synthesis of Large‐Pore Urea‐Bridged Periodic Mesoporous Organosilicas

Bringing order : A new class of periodic mesoporous organosilicas (PMOs) with a urea‐bridged organosilica precursor under acid‐catalyzed and inorganic‐salt‐assisted conditions was obtained. The large‐pore hybrid materials have ordered mesostructure with uniform pore size distributions, which can be seen from the TEM images.

     

Multiply Nitrated High‐Energy Dense Oxidizers Derived from the Simple Amino Acid Glycine

Various energetic polynitro esters, carbamates, and nitrocarbamates that were derived from the amino acid glycine were fully characterized by single‐crystal X‐ray diffraction, vibrational spectroscopy (IR and Raman), multinuclear NMR spectroscopy, elemental analysis, and differential scanning calorimetry (DSC). Owing to their positive oxygen balance, the suitability of these compounds as potential oxidizers in energetic formulations was investigated and discussed. In addition, the heats of formation of the products were calculated by using the Gaussian 09 program package at the CBS‐4M level of theory. From these values and the calculated densities (from the X‐ray data), several detonation parameters, such as detonation pressure, velocity, energy, and temperature, were computed by using the EXPLO5 code. Furthermore, their sensitivities towards impact, friction, and electrostatic discharge were tested by using a drop hammer, a friction tester (both BAM certified), and a small‐scale electrical‐discharge device, respectively.     

The Structures,Morphologies, and Photophysical Properties of Multiluminescent Layered Lanthanide–Phosphono–Carboxylate Nanoparticles

A new family of layered metal(III)–phosphono–carboxylate nanostructures (M=Y, Eu, Tb, Er, and Yb) was hydrothermally synthesized and their structures and morphologies were characterized by X‐ray powder diffraction and TEM. 4‐[Bis(phosphonomethyl)amino]caproic acid and 4‐ [bis(phosphonomethyl)amino]undecan‐ oic acid, with general formula (H₂O₃PCH₂)₂NR (R=C₅H₁₀COOH (P2CAPR) and C₁₀H₂₂COOH (P2UND), respectively) were used as building blocks for the preparation of novel layered hybrid materials in which the inorganic layers were composed of MO₇ or MO₈ polyhedra and PO₃C tetrahedra. The interlayer region was occupied by carboxyalkyl chains. These layered compounds were easily dispersed as stable solutions in alkylamine/water upon ultrasonication. These dispersions were constituted of rectangular elongated nanoparticles (NPs), which showed a distribution of sizes ranging from 20–500 nm. These new materials had interesting photophysical properties because they were multiluminescent compounds. These properties gave rise to several emission bands, which were spread over the broad spectroscopic region, from the near‐UV up to the near‐IR regions. Each emission band had a specific lifetime, which ranged from the sub‐ps to the ms scale.     

Synthesis and Application of a Bidentate Ligand Based on Decafluoro‐3‐phenyl‐3‐pentanol: Steric Effect of Pentafluoroethyl Groups on the Stereomutation of O‐Equatorial C‐Apical Spirophosphoranes

1,1,1,2,2,4,4,5,5,5‐Decafluoro‐3‐phenyl‐3‐pentanol was prepared by a Cannizzaro‐type disproportionation reaction, and the dimetallated compound was used as a bidentate ligand, which is bulkier than the Martin ligand (1,1,1,3,3,3‐hexafluoro‐2‐phenyl‐2‐propanol). A P? H spirophosphorane was synthesized by utilizing the new bidentate ligand, and the structure of the product was essentially the same as that of the P? H phosphorane with Martin ligands. Phosphoranes that exhibit reversed apicophilicity (O‐equatorial) were also synthesized and could be converted into the corresponding stable stereoisomers (O‐apical). The crystal structures of O‐equatorial phosphoranes and the O‐apical isomers were slightly affected by the steric repulsion of pentafluoroethyl groups. Kinetic measurements revealed that the stereomutation of O‐equatorial methylphosphorane to the O‐apical isomer was slowed. The activation enthalpy for the stereomutation of the former to the latter was higher than that of the phosphorane with Martin ligands by 5.1 kcal mol^?1.     

A New Two‐Dimensional Manganese(II) Coordination Polymer Constructed from Trinuclear Molecular Building Block: Syntheses,Structure and Magnetic Property

A new manganese(II) coordination polymer, [Mn₃(atpt)₃(2, 2′‐bpy)₂]_n ( 1 ) (H₂atpt = 2‐aminoterephthalic acid; 2, 2′‐bpy = 2, 2′‐bipyridine), was synthesized by hydrothermal reaction of Mn(OAc)₂, H₂atpt, and 2, 2′‐bpy. It was structurally characterized by element analysis, IR spectroscopy, powder XRD, and magnetic measurements. X‐ray single‐crystal analysis was carried out for 1 , which crystallizes in the orthorhombic system, space group Pbca. The single X‐ray diffraction studies reveal that 1 consists of infinite layers of alternating trinuclear manganese subunits and H₂atpt ligands. There are two types of different coordination modes of H₂atpt in 1 . Magnetic susceptibility data for 1 were measured in the range 3–300 K. There are antiferromagnetic interactions between manganese ions of 1 .     

The Many Faces of FOX‐7: A Precursor to High‐Performance Energetic Materials

New derivatives of 1,1‐diamino‐2, 2‐dinitroethene (FOX‐7) are reported. These highly oxygen‐ and nitrogen‐rich compounds were fully characterized using IR and multinuclear NMR spectroscopy, elemental analysis (EA), and differential scanning calorimetry (DSC). X‐ray structure determination of (E)‐1,2‐bis{(E)‐2‐chloro‐1‐(chloroimino)‐2,2‐dinitroethyl}diazene) ( 10 ), N1, N2‐dichloro‐1, 2‐diazenedicarboximidamide ( 11 ), and (E,E)‐N,N′‐1,2‐ethanediylidenebis(2, 2‐dinitro‐2‐chloro‐ethanamine) ( 12 ) was helpful in their characterization. Heats of formation (HOF) were calculated (Gaussian 03) and combined with experimental densities to estimate the detonation velocities (D) and pressures (P) of the high‐energy‐density materials (HEDMs) (EXPLO5, v6.01). The compounds exhibit good thermal stability, high density, positive HOF, acceptable oxygen balances, and excellent detonation properties, which often are superior to that of 1,3,5‐trinitroperhydro‐1,3,5‐triazine (RDX).     

Synthesis and Crystal Structures of t‐Butyl‐Pyridine Adducts of ZnR2 (R = Me,i‐Pr,t‐Bu,Cp*)

Lewis acid‐base adducts of the general type R₂Zn(4‐tBuPy)_x (R = Me 1 , iPr 2 , tBu 3 , Cp* 4 ; x = 1, 2) were obtained in high yields from reactions of ZnR₂ with the Lewis base 4‐tBu‐Pyridine. Compounds 1 – 4 were characterized by multinuclear NMR (¹H, ¹³C) and IR spectroscopy and elemental analyses, 1 and 4 also by X‐ray diffraction at single crystals.     

Structures and Dynamic Solution Behavior of Cationic,Two‐Coordinate Gold(I)–π‐Allene Complexes

A family of seven cationic gold complexes that contain both an alkyl substituted π‐allene ligand and an electron‐rich, sterically hindered supporting ligand was isolated in >90 % yield and characterized by spectroscopy and, in three cases, by X‐ray crystallography. Solution‐phase and solid‐state analysis of these complexes established preferential binding of gold to the less substituted C?C bond of the allene and to the allene π face trans to the substituent on the uncomplexed allenyl C?C bond. Kinetic analysis of intermolecular allene exchange established two‐term rate laws of the form rate=k₁[complex]+k₂[complex][allene] consistent with allene‐independent and allene‐dependent exchange pathways with energy barriers of ΔG^≠₁=17.4–18.8 and ΔG^≠₂=15.2–17.6 kcal mol^?1, respectively. Variable temperature (VT) NMR analysis revealed fluxional behavior consistent with facile (ΔG^≠=8.9–11.4 kcal mol^?1) intramolecular exchange of the allene π faces through η¹‐allene transition states and/or intermediates that retain a staggered arrangement of the allene substituents. VT NMR/spin saturation transfer analysis of [{P(tBu)₂o‐binaphthyl}Au(η²‐4,5‐nonadiene) ]⁺SbF₆^? ( 5 ), which contains elements of chirality in both the phosphine and allene ligands, revealed no epimerization of the allene ligand below the threshold for intermolecular allene exchange (ΔG^≠_298K=17.4 kcal mol^?1), which ruled out the participation of a η¹‐allylic cation species in the low‐energy π‐face exchange process for this complex.