Enhanced Photoactivity in Bilayer Films with Buried Rutile–Anatase Heterojunctions

Herein, we study the photoactivity of anatase–rutile bilayer thin films consisting of an anatase overlayer of variable thickness from some tenths to some hundred nanometers deposited onto a rutile thin film. As references single anatase layers of equivalent thickness were deposited onto silicon. All the films were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM) and Raman spectroscopy. The photoactivity of the samples was assessed by following the evolution with the UV illumination time of both the wetting angle on the thin film surface and the decoloration of a dye in a water solution. While a similar efficiency is found for the first type of experiments irrespective of the anatase thickness, in the second type a maximum in the photoactivity is found for a thickness of the anatase layer of about 130 nm. This enhanced photoactivity in bilayer systems with a buried anatase–rutile heterojunction is related to the formation of different Schottky potential barriers in the anatase layer, depending on its thickness and the substrate (i.e. rutile or SiO₂) where it is deposited.     

AgI Microplate Monocrystals with Polar {0001} Facets: Spontaneous Photocarrier Separation and Enhanced Photocatalytic Activity

Elucidating the facet‐dependent photocatalytic activity of semiconductor photocatalysts is important in improving the overall efficiency of photocatalysis. Furthermore, combining facet control with selective deposition of oxidation and/or reduction cocatalysts on specific faces of semiconductor photocatalysts is potentially an effective strategy to synergistically optimize the functionality of photocatalysts. In the present study, high‐purity wurtzite‐type β‐AgI platelet microcrystals with polar {0001} facets were prepared by a facile polyvinylpyrrolidone‐assisted precipitation reaction. The polar‐faceted AgI microplates were used as archetypes to demonstrate preferential diametric migration (i.e., effective separation) of photogenerated electrons and holes along the c axis. Such vectorial electron–hole separation stems from the asymmetric surface structures, which give rise to distinct photoexcited reaction behaviors on the ±(0001) polar facets of wurtzite‐type semiconductors. Furthermore, on selective deposition of Ag and MnO_x (1.5<x<2) cocatalysts on the reductive (0001) and oxidative (000$\bar 1$ ) facets, respectively, photocatalytic activity of the AgI microplates in degrading organic pollutants was dramatically enhanced thanks to the broad light‐absorption range, strong dye‐adsorption ability, and effective spatial separation of photocarriers.     

Polyhedral AgBr Microcrystals with an Increased Percentage of Exposed {111} Facets as a Highly Efficient Visible‐Light Photocatalyst

Synthesis of inorganic single crystals with exposed high‐reactivity facets is a desirable target in the catalytic chemistry field. Polyhedral AgBr microcrystals with an increased percentage of exposed high‐reactivity {111} facets have been successfully prepared for the first time, and the photocatalytic performance of these microcrystals when used as an AgBr/Ag plasmonic photocatalyst was investigated. The results indicate that the as‐prepared sample has high photocatalytic activity and, under the same measurement conditions, the photodegradation rate of methyl orange dye over these microcrystals is at least four times faster than with other shapes of AgBr/Ag microstructure, as well as 20 times faster than with the highly efficient Ag₃PO₄ photocatalyst. DFT calculations suggest that the AgBr (111) surface is mainly composed of unsaturated Ag atoms and has a relatively high surface energy, both of which are favorable for enhancing the photocatalytic activity of the AgBr/Ag polyhedron photocatalyst. This work not only provides a highly efficient plasmonic photocatalyst of polyhedral AgBr/Ag microcrystals with an increased percentage of exposed high‐reactivity AgBr {111} facets, but also demonstrates that the shape and crystalline quality of the exposed facets have an important influence on the photocatalytic activities.     

Sequence‐Dependent Photocurrent Generation through Long‐Distance Excess‐Electron Transfer in DNA

Given its well‐ordered continuous π stacking of nucleobases, DNA has been considered as a biomaterial for charge transfer in biosensors. For cathodic photocurrent generation resulting from hole transfer in DNA, sensitivity to DNA structure and base‐pair stacking has been confirmed. However, such information has not been provided for anodic photocurrent generation resulting from excess‐electron transfer in DNA. In the present study, we measured the anodic photocurrent of a DNA‐modified Au electrode. Our results demonstrate long‐distance excess‐electron transfer in DNA, which is dominated by a hopping mechanism, and the photocurrent generation is sequence dependent.     

Highly Efficient Low‐Temperature Plasma‐Assisted Modification of TiO2 Nanosheets with Exposed {001} Facets for Enhanced Visible‐Light Photocatalytic Activity

Anatase TiO₂ nanosheets with exposed {001} facets have been controllably modified under non‐thermal dielectric barrier discharge (DBD) plasma with various working gas, including Ar, H₂, and NH₃. The obtained TiO₂ nanosheets possess a unique crystalline core/amorphous shell structure (TiO₂@TiO_2?x), which exhibit the improved visible and near‐infrared light absorption. The types of dopants (oxygen vacancy/surface Ti³⁺/substituted N) in oxygen‐deficient TiO₂ can be tuned by controlling the working gases during plasma discharge. Both surface Ti³⁺ and substituted N were doped into the lattice of TiO₂ through NH₃ plasma discharge, whereas the oxygen vacancy or Ti³⁺ (along with the oxygen vacancy) was obtained after Ar or H₂ plasma treatment. The TiO₂@TiO_2?x from NH₃ plasma with a green color shows the highest photocatalytic activity under visible‐light irradiation compared with the products from Ar plasma or H₂ plasma due to the synergistic effect of reduction and simultaneous nitridation in the NH₃ plasma.     

(110)‐Oriented ZIF‐8 Thin Films on ITO with Controllable Thickness

(110)‐oriented zeolitic imidazolate framework (ZIF)‐8 thin films with controllable thickness are successfully deposited on indium tin oxide (ITO) electrodes at room temperature. The method applied uses 3‐aminopropyltriethoxysilane (APTES) in the form of self‐assembled monolayers (SAMs), followed by a subsequent adoption of the layer‐by‐layer (LBL) method. The crystallographic preferential orientation (CPO) index shows that the ZIF‐8 thin films are (110)‐oriented. A possible mechanism for the growth of the (110)‐oriented ZIF‐8 thin films on 3‐aminopropyltriethoxysilane modified ITO is proposed. The observed cross‐sectional scanning electron microscopy (SEM) images and photoluminescent (PL) spectra of the ZIF‐8 thin films indicate that the thickness of the ZIF‐8 layers is proportional to the number of growth cycles. The extension of such a SAM method for the fabrication of ZIF‐8 thin films as described herein should be applicable in other ZIF materials, and the as‐prepared ZIF‐8 thin films on ITO may be explored for photoelectrochemical applications.     

Synthesis of {100} Facet Dominant Anatase TiO2 Nanobelts and the Origin of Facet‐Dependent Photoreactivity

Sword‐like anatase TiO₂ nanobelts exposed with 78 % clean {100} facets were synthesized and the facet‐dependent photoreactivity of anatase TiO₂ was investigated. By quantitative comparison with the reference {001} facets, the {100} facets possessed about ten‐times higher active sites density than that on {001} facets, resulting in higher photoreaction efficiency. After the active sites density normalization, the {100} and {001} facets exhibited distinct wavelength‐dependent photocatalytic performance, attributed to the anisotropic electronic structures in TiO₂ crystals.     

Thin Films that Consist of CuO Mesocrystal Nanosheets: An Application of Microbial‐Mineralization‐Inspired Approaches to Thin‐Film Formation

Thin films of copper oxides can be synthesized on substrates by using approaches that are inspired by microbial mineralization processes. In nature, precipitates of manganese and iron oxides with controlled oxidation states and crystal phases are produced through biomineralization by microorganisms. We have previously reported microbial‐mineralization‐inspired approaches that are comprised of direct and intermediate routes for the controlled syntheses of transition‐metal oxides. Herein, these approaches are applied to the thin‐film formation and coating of copper oxides and a related compound with controlled crystal phases and morphologies. Thin films of CuO, Cu₂O, and Cu₂(OH)₃Cl were selectively synthesized by using direct or intermediate routes. Notably, CuO mesocrystal nanosheets formed a thin film over the whole of the substrate. The resultant CuO mesocrystal nanosheets showed enhanced properties for the electrochemical detection of dopamine. This study shows the potential applicability of microbial‐mineralization‐inspired approaches to thin‐film coatings.     

C‐oriented and {010} Facets Exposed BiVO4 Nanowall Films: Template‐Free Fabrication and their Enhanced Photoelectrochemical Properties

Vertically aligned BiVO₄ nanowall films on indium tin oxide (ITO) glass have been fabricated through a template‐free hydrothermal method for the first time. Based on the structural understanding of both BiVO₄ and ITO, the lattice matches ({020}_BiVO4 and {040}_ITO, {200}_BiVO4 and {004}_ITO, respectively) and the similarity of metal atomic arrangement parallel to {001} planes turn out to be crucial for the fabrication of the nanowalls. Consequently, the growth of a BiVO₄ film begins from heteroepitaxy and undergoes an Ostwald ripening process to form an extended network, resulting in a c‐orientation and exposing {010} facets. Through this process, it is much easier to obtain a range of nanowall films with different packing densities, as the surface state of ITO glass is alterable by adjusting the concentration of acid. The films can be directly used as an electrode, which exhibits an excellent response to visible light, especially light with low intensity, allowing for the electrical interconnection, highly active surface, appropriate orientation, and a good contact with the substrate. There are great benefits in improving the technique for detecting the weak light source signals.     

Earth‐Abundant Oxygen Evolution Catalysts Coupled onto ZnO Nanowire Arrays for Efficient Photoelectrochemical Water Cleavage

ZnO has long been considered as a model UV‐driven photoanode for photoelectrochemical water splitting, but its performance has been limited by fast charge‐carrier recombination, extremely poor stability in aqueous solution, and slow kinetics of water oxidation. These issues were addressed by applying a strategy of optimization and passivation of hydrothermally grown 1D ZnO nanowire arrays. The length and diameter of bare ZnO nanowires were optimized by varying the growth time and precursor concentration to achieve optimal photoelectrochemical performance. The addition of earth‐abundant cobalt phosphate (Co‐Pi) and nickel borate (Ni‐B) oxygen evolution catalysts onto ZnO nanowires resulted in substantial cathodic shifts in onset potential to as low as about 0.3 V versus the reversible hydrogen electrode (RHE) for Ni‐B/ZnO, for which a maximum photocurrent density of 1.1 mA cm^?2 at 0.9 V (vs. RHE) with applied bias photon‐to‐current efficiency of 0.4 % and an unprecedented near‐unity incident photon‐to‐current efficiency at 370 nm. In addition the potential required for saturated photocurrent was dramatically reduced from 1.6 to 0.9 V versus RHE. Furthermore, the stability of these ZnO nanowires was significantly enhanced by using Ni‐B compared to Co‐Pi due to its superior chemical robustness, and it thus has additional functionality as a stable protecting layer on the ZnO surface. These remarkable enhancements in both photocatalytic activity and stability directly address the current severe limitations in the use of ZnO‐based photoelectrodes for water‐splitting applications, and can be applied to other photoanodes for efficient solar‐driven fuel synthesis.     

Wurtzite Cu2GeS3 Nanocrystals: Phase‐ and Shape‐Controlled Colloidal Synthesis

The first colloidal synthesis of Cu₂GeS₃ (CGS) nanocrystals with a thermodynamically metastable wurtzite crystal phase is reported. As a benefit of the sulfur precursors used in the synthesis, the shape of the as‐synthesized wurtzite CGS nanocrystals can be controlled in the form of spherical nanoparticles, nanorectangles, and hollow nanorectangles. A detailed investigation into the effects of reaction conditions necessary to obtain phase‐pure wurtzite CGS nanocrystals is presented. The choice of sulfur precursor and precursor injection temperature play a significant role in determining the crystal phase of the CGS nanocrystals. The band gap of the new wurtzite phase CGS was measured to be 1.76 eV and the CGS nanocrystals exhibited a good electrochemical photoresponse, which was indicative of their potential application as an active layer in the field of solar cells.     

Europium‐Doped Mesoporous Titania Thin Films: Rare‐Earth Locations and Emission Fluctuations under Illumination

Herein, Eu^III‐doped 3D mesoscopically ordered arrays of mesoporous and nanocrystalline titania are prepared and studied. The rare‐earth‐doped titania thin films—synthesized via evaporation‐induced self‐assembly (EISA)—are characterized by using environmental ellipsoporosimetry, electronic microscopy (i.e. high‐resolution scanning electron microscopy, HR‐SEM, and transmission electron microscopy, HR‐TEM), X‐ray diffraction, and luminescence spectroscopy. Structural characterizations show that high europium‐ion loadings can be incorporated into the titanium‐dioxide walls without destroying the mesoporous arrangement. The luminescence properties of Eu^III are investigated by using steady‐state and time‐resolved spectroscopy via excitation of the Eu^III ions through the titania host. Using Eu^III luminescence as a probe, the europium‐ion sites can be addressed with at least two different environments within the mesoporous framework, namely, a nanocrystalline environment and a glasslike one. Emission fluctuations (⁵D₀→⁷F₂) are observed upon continuous UV excitation in the host matrix. These fluctuations are attributed to charge trapping and appear to be strongly dependent on the amount of europium and the level of crystallinity.