Hierarchically Structured ZnO Nanorods as an Efficient Photoanode for Dye‐Sensitized Solar Cells

Hierarchical ZnO nanorods composed of interconnected nanoparticles, which were synthesized by controlling precursor concentrations in a solvothermally assisted process, were exploited as photoanodes in dye‐sensitized solar cells (DSCs). The as‐prepared hierarchical nanorods showed greatly enhanced light scattering compared to ZnO nanoparticles for boosting light harvesting while maintaining sufficient dye‐adsorption capability. The charge‐transfer characteristics were studied by electrochemical impedance measurements, and reduced electron recombination and longer electron lifetime were observed for the ZnO nanorods. Photovoltaic characterization demonstrated that DSCs utilizing the hierarchical nanorods significantly improved the overall conversion efficiency by 34 % compared to nanoparticle‐based DSCs.     

ZnO hierarchical structures for efficient quasi-solid dye-sensitized solar cells

We report a direct precipitation method for mass production of ZnO microflowers (MFs) containing hierarchical structures. The ZnO MFs are constructed by interlaced single crystalline and porous nanosheets which are ideal photoanode material for dye-sensitized solar cells (DSCs) because the MFs can largely improve the energy harvesting performance and the efficiency of DSCs. Compared with other forms of nano-sized structures, the novel hierarchical structures show obvious advantages in DSC application because of their large surface area for dye-loading, good light scattering efficiency and excellent electrical transport property. The quasi-solid state DSCs fabricated with the MF hierarchical structures exhibited an efficiency of 4.12%, much higher than that of ZnO nanoparticle-based DSCs, indicating a great potential for the development of highly-efficient quasi-solid DSCs.     

Ultrathin SnO2 Scaffolds for TiO2‐Based Heterojunction Photoanodes in Dye‐Sensitized Solar Cells: Oriented Charge Transport and Improved Light Scattering

In this paper, band‐structure matching strategy of a TiO₂‐based heterojunction within which electrons can be collected from TiO₂ nanoparticles and transported rapidly in the bulk structure is reported. On the basis of the band‐structure analysis of different TiO₂‐based heterostructures, focus was directed to the SnO₂ nanosheet because of its appropriate band position and high electrical conductivity. Through a systematic investigation of the incorporation of ultrathin SnO₂ nanosheet scaffolds for TiO₂‐based photoanodes in dye‐sensitized solar cells (DSCs), we propose an anisotropy “constrained random walk” model to describe the controlled electron transit process. In this system, electrons are transferred orientedly overall, as well as randomly locally, leading to a significant reduction in the charge diffusion route compared to the conventional isotropic “random walk” model. In brief, the 2D ultrathin nanosheets provide rapid transit pathways and improved light‐scattering centers, which can ensure a sufficient amount of dye loading and slow recombination. An overall light‐to‐electricity conversion efficiency as high as 8.25 % is achieved by embedding the appropriate amount of SnO₂ scaffold in a TiO₂‐based photoanode.     

Enhanced Electrocatalytic Performance of a Porous g‐C3N4/Graphene Composite as a Counter Electrode for Dye‐Sensitized Solar Cells

A porous graphitic carbon nitride (g‐C₃N₄)/graphene composite was prepared by a simple hydrothermal method and explored as the counter electrode of dye‐sensitized solar cells (DSCs). The obtained g‐C₃N₄/graphene composite was characterized by XRD, SEM, TEM, FTIR spectroscopy, and X‐ray photoelectron spectroscopy. The results show that incorporating graphene nanosheets into g‐C₃N₄ forms a three‐dimensional architecture with a high surface area, porous structure, efficient electron‐transport network, and fast charge‐transfer kinetics at the g‐C₃N₄/graphene interfaces. These properties result in more electrocatalytic active sites and facilitate electrolyte diffusion and electron transport in the porous framework. As a result, the as‐prepared porous g‐C₃N₄/graphene composite exhibits an excellent electrocatalytic activity. In I^?/I₃^? redox electrolyte, the charge‐transfer resistance of the porous g‐C₃N₄/graphene composite electrode is 1.8 Ω cm², which is much lower than those of individual g‐C₃N₄ (70.1 Ω cm²) and graphene (32.4 Ω cm²) electrodes. This enhanced electrocatalytic performance is beneficial for improving the photovoltaic performance of DSCs. By employing the porous g‐C₃N₄/graphene composite as the counter electrode, the DSC achieves a conversion efficiency of 7.13 %. This efficiency is comparable to 7.37 % for a cell with a platinum counter electrode.     

Environmentally Benign and Efficient Ag2S‐ZnO Nanowires as Photoanodes for Solar Cells: Comparison with CdS‐ZnO Nanowires

In this work, we develop a low‐temperature, facile solution reaction route for the fabrication of quantum‐dot‐sensitized solar cells (QDSSCs) containing Ag₂S‐ZnO nanowires (NWs), simultaneously ensuring low manufacturing costs and environmental safety. For comparison, a CdS‐ZnO NW photoanode was also prepared using the layer‐by‐layer growth method. Ultraviolet photoelectron spectroscopy analysis revealed type‐II band alignments for the band structures of both photoanodes which facilitate electron transfer/collection. Compared to CdS‐ZnO QDSSCs, Ag₂S‐ZnO QDSSCs exhibit a considerably higher short‐circuit current density (J_sc) and a strongly enhanced light‐harvesting efficiency, but lower open‐circuit voltages (V_oc), resulting in almost the same power‐conversion efficiency of 1.2 %. Through this work, we demonstrate Ag₂S as an efficient quantum‐dot‐sensitizing material that has the potential to replace Cd‐based sensitizers for eco‐friendly applications.     

Enhancing Electron Collection Efficiency and Effective Diffusion Length in Dye‐Sensitized Solar Cells

Intensity‐modulated photocurrent spectroscopy and intensity‐modulated photovoltage spectroscopy are employed to measure the dynamics of electron transport and recombination in the ZnO nanowire (NW) array‐ZnO/layered basic zinc acetate (LBZA) nanoparticle (NP) composite dye‐sensitized solar cells (DSSCs). The roles of the vertical ZnO NWs and insulating LBZA in the electron collection and transport in DSSCs are investigated by comparing the results to those in the TiO₂–NP, horizontal TiO₂–NW and vertical ZnO–NW‐array DSSCs. The electron transport rate and electron lifetime in the ZnO NW/NP composite DSSC are superior to those in the conventional TiO₂–NP cell due to the existence of the vertical ZnO NWs and insulating LBZA. It indicates that the ZnO NW/NP composite anode is able to sustain efficient electron collection over much greater thickness than the TiO₂–NP cell does. Consequently, a larger effective electron diffusion length is available in the ZnO composite DSSC.     

In Situ Photocatalytically Heterostructured ZnOAg Nanoparticle Composites as Effective Cathode‐Modifying Layers for Air‐Processed Polymer Solar Cells

A heterostructured semiconductor–metal ZnO?Ag nanoparticle (NP) composite was constructed through a straightforward photocatalytic strategy by using UV irradiation of ZnO NPs and an aqueous solution of Ag precursor. The ZnO?Ag NP composites serve as an effective cathode‐modifying layer in polymer solar cells (PSCs) with increased short‐circuit current density owing to the light‐trapping effect, and improved optical and electrical conductivity properties compared with pure ZnO NPs. The Ag NPs, which are photodeposited in situ on ZnO NPs, can act as effective antennas for incident light to maximize light harvesting and minimize radiative decay or nonradiative losses, consequently resulting in the enhanced photogeneration of excitons in PSCs. Systematic photoelectron and ‐physical investigations confirm that heterostructured ZnO?Ag NPs can significantly improve charge separation, transport, and collection, as well as lower charge recombination at the cathode interface, leading to a 14.0 % improvement in air‐processed device power conversion efficiency. In addition, this processable, cost‐effective, and scalable approach is compatible with roll‐to‐roll manufacturing of large‐scale PSCs.     

Characterizing the Role of Iodine Doping in Improving Photovoltaic Performance of Dye‐Sensitized Hierarchically Structured ZnO Solar Cells

We report two novel types of hierarchically structured iodine‐doped ZnO (I? ZnO)‐based dye‐sensitized solar cells (DSCs) using indoline D205 and the ruthenium complex N719 as sensitizers. It was found that iodine doping boosts the efficiencies of D205 I? ZnO and N719 I? ZnO DSCs with an enhancement of 20.3 and 17.9 %, respectively, compared to the undoped versions. Transient absorption spectra demonstrated that iodine doping impels an increase in the decay time of I? ZnO, favoring enhanced exciton life. Mott–Schottky analysis results indicated a negative shift of the flat‐band potential (V_fb) of ZnO, caused by iodine doping, and this shift correlated with the enhancement of the open circuit voltage (V_oc). To reveal the effect of iodine doping on the effective separation of e^?‐h⁺ pairs which is responsible for cell efficiency, direct visualization of light‐induced changes in the surface potential between I? ZnO particles and dye molecules were traced by Kelvin probe force microscopy. We found that potential changes of iodine‐doped ZnO films by irradiation were above one hundred millivolts and thus significantly greater. In order to correlate enhanced cell performance with iodine doping, electrochemical impedance spectroscopy, incident‐photon‐current efficiency, and cyclic voltammetry investigations on I? ZnO cells were carried out. The results revealed several favorable features of I? ZnO cells, that is, longer electron lifetime, lower charge‐transfer resistance, stronger peak current, and extended visible light harvest, all of which serve to promote cell performance.     

Generalized Low‐Temperature Fabrication of Scalable Multi‐Type Two‐Dimensional Nanosheets with a Green Soft Template

Two‐dimensional nanosheets with high specific surface areas and fascinating physical and chemical properties have attracted tremendous interests because of their promising potentials in both fundamental research and practical applications. However, the problem of developing a universal strategy with a facile and cost‐effective synthesis process for multi‐type ultrathin 2 D nanostructures remains unresolved. Herein, we report a generalized low‐temperature fabrication of scalable multi‐type 2 D nanosheets including metal hydroxides (such as Ni(OH)₂, Co(OH)₂, Cd(OH)₂, and Mg(OH)₂), metal oxides (such as ZnO and Mn₃O₄), and layered mixed transition‐metal hydroxides (Ni‐Co LDH, Ni‐Fe LDH, Co‐Fe LDH, and Ni‐Co‐Fe layered ternary hydroxides) through the rational employment of a green soft‐template. The synthesized crystalline inorganic nanosheets possess confined thickness, resulting in ultrahigh surface atom ratios and chemically reactive facets. Upon evaluation as electrode materials for pseudocapacitors, the Ni‐Co LDH nanosheets exhibit a high specific capacitance of 1087 F g^?1 at a current density of 1 A g^?1, and excellent stability, with 103 % retention after 500 cycles. This strategy is facile and scalable for the production of high‐quality ultrathin crystalline inorganic nanosheets, with the possibility of extension to the preparation of other complex nanosheets.     

Length‐Dependent Charge Generation from Vertical Arrays of High‐Aspect‐Ratio ZnO Nanowires

Aqueous chemical growth of zinc oxide nanowires is a flexible and effective approach to obtain dense arrays of vertically oriented nanostructures with high aspect ratio. Herein we present a systematic study of the different synthesis parameters that influence the ZnO seed layer and thus the resulting morphological features of the free‐standing vertically oriented ZnO nanowires. We obtained a homogeneous coverage of transparent conductive substrates with high‐aspect‐ratio nanowire arrays (length/diameter ratio of up to 52). Such nanostructured vertical arrays were examined to assess their electric and piezoelectric properties, and showed an electric charge generation upon mechanical compressive stress. The principle of energy harvesting with these nanostructured ZnO arrays was demonstrated by connecting them to an electronic charge amplifier and storing the generated charge in a series of capacitors. We found that the generated charge and the electrical behavior of the ZnO nanowires are strictly dependent on the nanowire length. We have shown the importance of controlling the morphological properties of such ZnO nanostructures for optimizing a nanogenerator device.     

Quantum‐Dot‐Sensitized Solar Cells

Quantum‐dot‐sensitized solar cells (QDSCs) are a promising low‐cost alternative to existing photovoltaic technologies such as crystalline silicon and thin inorganic films. The absorption spectrum of quantum dots (QDs) can be tailored by controlling their size, and QDs can be produced by low‐cost methods. Nanostructures such as mesoporous films, nanorods, nanowires, nanotubes and nanosheets with high microscopic surface area, redox electrolytes and solid‐state hole conductors are borrowed from standard dye‐sensitized solar cells (DSCs) to fabricate electron conductor/QD monolayer/hole conductor junctions with high optical absorbance. Herein we focus on recent developments in the field of mono‐ and polydisperse QDSCs. Stability issues are adressed, coating methods are presented, performance is reviewed and special emphasis is given to the importance of energy‐level alignment to increase the light to electric power conversion efficiency.     

Controllable Synthesis of Ultrathin Transition‐Metal Hydroxide Nanosheets and their Extended Composite Nanostructures for Enhanced Catalytic Activity in the Heck Reaction

We report an effective and universal approach for the preparation of ultrathin single‐ or multiple‐component transition‐metal hydroxide (TMH) nanosheets with thickness below 5 nm. The unique synthesis benefits from the gradual decomposition of the preformed metal–boron (M‐B, M=Fe, Co, Ni, NiCo) composite nanospheres which facilitates the formation of ultrathin nanosheets by the oxidation of the metal and the simultaneous release of boron species. The high specific surface area of the sheets associated with their ultrathin nature promises a wide range of applications. For example, we demonstrate the remarkable adsorption ability of Pb^II and As^V in waste water by the ultrathin FeOOH nanosheets. More interestingly, the process can be extended simply to the synthesis of composite structures of metal alloy hollow shells encapsulated by TMH nanosheets, which show excellent catalytic activity in the Heck reaction.     

Earth‐Abundant Oxygen Evolution Catalysts Coupled onto ZnO Nanowire Arrays for Efficient Photoelectrochemical Water Cleavage

ZnO has long been considered as a model UV‐driven photoanode for photoelectrochemical water splitting, but its performance has been limited by fast charge‐carrier recombination, extremely poor stability in aqueous solution, and slow kinetics of water oxidation. These issues were addressed by applying a strategy of optimization and passivation of hydrothermally grown 1D ZnO nanowire arrays. The length and diameter of bare ZnO nanowires were optimized by varying the growth time and precursor concentration to achieve optimal photoelectrochemical performance. The addition of earth‐abundant cobalt phosphate (Co‐Pi) and nickel borate (Ni‐B) oxygen evolution catalysts onto ZnO nanowires resulted in substantial cathodic shifts in onset potential to as low as about 0.3 V versus the reversible hydrogen electrode (RHE) for Ni‐B/ZnO, for which a maximum photocurrent density of 1.1 mA cm^?2 at 0.9 V (vs. RHE) with applied bias photon‐to‐current efficiency of 0.4 % and an unprecedented near‐unity incident photon‐to‐current efficiency at 370 nm. In addition the potential required for saturated photocurrent was dramatically reduced from 1.6 to 0.9 V versus RHE. Furthermore, the stability of these ZnO nanowires was significantly enhanced by using Ni‐B compared to Co‐Pi due to its superior chemical robustness, and it thus has additional functionality as a stable protecting layer on the ZnO surface. These remarkable enhancements in both photocatalytic activity and stability directly address the current severe limitations in the use of ZnO‐based photoelectrodes for water‐splitting applications, and can be applied to other photoanodes for efficient solar‐driven fuel synthesis.     

Supramolecular Reassembly of Self‐Exfoliated Ionic Covalent Organic Nanosheets for Label‐Free Detection of Double‐Stranded DNA

Ionic covalent organic nanosheets (iCONs), a member of the two‐dimensional (2D) nanomaterials family, offer a unique functional platform for a wide range of applications. Herein, we explore the potential of an ethidium bromide (EB)‐based covalent organic framework ( EB‐TFP ) that self‐exfoliates in water resulting in 2D ionic covalent organic nanosheets ( EB‐TFP‐iCONs ) for the selective detection of double‐stranded DNA (dsDNA). In an aqueous medium, the self‐exfoliated EB‐TFP‐iCONs reassemble in the presence of dsDNA resulting in hybrid EB‐TFP‐iCONs‐DNA crystalline nanosheets with enhanced fluorescence at 600 nm. Detailed steady‐state and time‐resolved emission studies revealed that the reassembly phenomenon was highly selective for dsDNA when compared to single‐stranded DNA (ssDNA), which allowed us to use the EB‐TFP‐iCONs as a 2D fluorescent platform for the label‐free detection of complementary DNA strands.     

Free‐Standing CoO‐POM Janus‐like Ultrathin Nanosheets

A single‐step solution‐based strategy is used to obtain 2D Janus‐like free‐standing ultrathin nanosheets build from two structurally unrelated species, that is, polyoxomolybdate (POM) and CoO. A controlled 2D‐to‐1D morphological transition was achieved by judiciously adjusting the solvent choice. These POM‐CoO heterostructures can behave as an ideal catalyst for the epoxidation of styrene. Benefiting from their amphiphilic nature, these 2D POM‐CoO nanosheets have also been used as surfactant to emulsify immiscible solvents. It is anticipated that structurally diverse polyoxometalates will offer promise as design elements for variety of structurally and compositionally tunable van der Waals integrated heteromaterials having a broad range applications.     

Zinc Porphyrins with a Pyridine‐Ring‐Anchoring Group for Dye‐Sensitized Solar Cells

Anchoring groups are extremely important in controlling the performance of dye‐sensitized solar cells (DSCs). The design and characterization of sensitizers with new anchoring groups, in particular non‐carboxylic acid groups, has become a recent focus of DSC research. Herein, new donor? π? acceptor zinc? porphyrin dyes with a pyridine ring as an anchoring group have been designed and synthesized for applications in DSCs. Photophysical and electrochemical investigations demonstrated that the pyridine ring worked effectively as an anchoring group for the porphyrin sensitizers. DSCs that were based on these new porphyrins showed an overall power‐conversion efficiency of about 4.0 % under full sunlight (AM 1.5G, 100 mW cm^?2).     

Electron Transport in Quasi‐Two‐Dimensional Porous Network of Titania Nanoparticles,Incorporating Electrical and Optical Advantages in Dye‐Sensitized Solar Cells

The integration of fast electron transport and large effective surface area is critical to attaining higher gains in the nanostructured photovoltaic devices. Here, we report facilitated electron transport in the quasi‐two‐dimensional (Q2D) porous TiO₂. Liquid electrolyte dye‐sensitized solar cells were prepared by utilizing photoanodes based on the Q2D porous substructures. Due to electron confinement in a microscale porous medium, directional diffusion toward collecting electrode is induced into the electron transport. Our measurements based on the photocurrent and photovoltage time‐of‐flight transients show that at higher Fermi levels, the electron diffusion coefficient in the Q2D porous TiO₂ is about one order of magnitude higher when compared with the conventional layer of porous TiO₂. The results show that microstructuring of the porous TiO₂ leads to an approximately threefold improvement in the electron diffusion length. Such a modification may considerably affects the electrical functionality of moderate or low performance dye‐sensitized solar cells for which the internal gain or collection efficiency is typically low.     

Well‐Dispersed CoS Nanoparticles on a Functionalized Graphene Nanosheet Surface: A Counter Electrode of Dye‐Sensitized Solar Cells

With a facile electrophoretic deposition and chemical bath process, CoS nanoparticles have been uniformly dispersed on the surface of the functionalized graphene nanosheets (FGNS). The composite was employed as a counter electrode of dye‐sensitized solar cells (DSSCs), which yielded a power conversion efficiency of 5.54 %. It is found that this efficiency is higher than those of DSSCs based on the non‐uniform CoS nanoparticles on FGNS (4.45 %) and built on the naked CoS nanoparticles (4.79 %). The achieved efficiency of our cost‐effective DSSC is also comparable to that of noble metal Pt‐based DSSC (5.90 %). Our studies have revealed that both the exceptional electrical conductivity of the FGNS and the excellent catalytic activity of the CoS nanoparticles improve the conversion efficiency of the uniformly FGNS‐CoS composite counter electrode. The electrochemical impedance spectra, cyclic voltammetry, and Tafel polarization have evidenced the best catalytic activity and the fastest electron transport. Additionally, the dispersion condition of CoS nanoparticles on FGNS plays an important role for catalytic reduction of I₃^?.     

CuO Quantum‐Dot‐Sensitized Mesoporous ZnO for Visible‐Light Photocatalysis

How to extend ultraviolet photocatalysts to the visible‐light region is a key challenge for solar‐driven photocatalysis. Herein, we show that ultraviolet ZnO photocatalysts can present high visible‐light photocatalytic activity when combined with CuO quantum dots (QDs; <3 nm). Theoretical analysis demonstrates that the quantum size effect plays a key role in the photoactivity of the CuO/ZnO composite. For CuO QDs smaller than 3 nm, the separated charges could transfer from CuO QDs to the conduction bands of ZnO due to quantum splitting of the CuO energy level and phonon compensation for the difference in the conduction band minimum of CuO and ZnO; however, this process would not occur with the disappearance of the quantum size effect. Further structural analysis demonstrates that interfacial charge separation and transfer between ZnO and CuO dominate the photocatalytic processes instead of a single CuO or ZnO surface. Compared with ZnO? noble metal structures (e.g., ZnO? Ag or ZnO? Au), these ZnO? CuO QD composites present wider absorption bands, higher visible photocatalytic efficiencies, and lower costs.     

Bioinorganic Nanocomposite Hydrogels Formed by HRP–GOx‐Cascade‐Catalyzed Polymerization and Exfoliation of the Layered Composites

The mild preparation of multifunctional nanocomposite hydrogels is of great importance for practical applications. We report that bioinorganic nanocomposite hydrogels, with calcium niobate nanosheets as cross‐linkers, can be prepared by dual‐enzyme‐triggered polymerization and exfoliation of the layered composite. The layered HRP/calcium niobate composites (HRP=horseradish peroxidase) are formed by the assembly of the calcium niobate nanosheets with HRP. The dual‐enzyme‐triggered polymerization can induce the subsequent exfoliation of the layered composite and final gelation through the interaction between polymer chains and inorganic nanosheets. The self‐immobilized HRP‐GOx enzymes (GOx=glucose oxidase) within the nanocomposite hydrogel retain most of enzymatic activity. Evidently, their thermal stability and reusability can be improved. Notably, our strategy could be easily extended to other inorganic layered materials for the fabrication of other functional nanocomposite hydrogels.