Preparation and Characterization of Carbon Nano‐Onion/PEDOT:PSS Composites

Composites of unmodified or oxidized carbon nano‐onions (CNOs/ox‐CNOs) with poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) are prepared with different compositions. By varying the ratio of PEDOT:PSS relative to CNOs, CNO/PEDOT:PSS composites with various PEDOT:PSS loadings are obtained and the corresponding film properties are studied as a function of the polymer. X‐ray photoelectron spectroscopy characterization is performed for pristine and ox‐CNO samples. The composites are characterized by scanning and transmission electron microscopy and differential scanning calorimetry studies. The electrochemical properties of the nanocomposites are determined and compared. Doping the composites with carbon nanostructures significantly increases their mechanical and electrochemical stabilities. A comparison of the results shows that CNOs dispersed in the polymer matrices increase the capacitance of the CNO/PEDOT:PSS and ox‐CNO/PEDOT:PSS composites.     

Small Noncytotoxic Carbon Nano‐Onions: First Covalent Functionalization with Biomolecules

Small carbon nano‐onions (CNOs, 6–8 shells) were prepared in high yield and functionalized with carboxylic groups by chemical oxidation. After functionalization these nanostructures were soluble in aqueous solutions. 3‐(4,5‐dimethylthiazol‐2‐yl)‐5‐(3‐carboxymethoxyphenyl)‐2‐(4‐sulfophenyl)‐2 tetrazolium (MTS) tests showed excellent cytocompatibility of all CNOs analyzed at 30 and 300 μg mL^?1, so these carbon nanostructures can be safely used for biological applications. The first covalent functionalization of oxidized CNOs (ox‐CNOs) with biomolecules, by using biotin–avidin interactions is reported here. Multilayers were prepared on a gold surface by layer‐by‐layer assembly and the process was monitored by surface plasmon resonance (SPR) spectroscopy and atomic force microscopy (AFM). Covalent binding of molecules to the short amine‐terminated organosulfur monolayers was assessed by Fourier transform infrared spectroscopy using total attenuated reflactance mode (FT‐IR/HATR).     

New Polyoxometalates Containing Hybrid Polymers and Their Potential for Nano‐Patterning

Two new polyoxometalate (POM)‐based hybrid monomers (Bu₄N)₅(H)[P₂V₃W₁₅O₅₉{(OCH₂)₃CNHCO(CH₃)C?CH₂}] ( 2 ) and (S(CH₃)₂C₆H₄OCOC(CH₃)=CH₂)₆[PVMo₁₀O₄₀] ( 5 ) were developed by grafting polymerizable organic units covalently or electrostatically onto Wells–Dawson and Keggin‐type clusters and were characterized by analytical and spectroscopic techniques including ESI‐MS and/or single‐crystal X‐ray diffraction analyses. Radical initiated polymerization of 2 and 5 with organic monomers (methacryloyloxy)phenyldimethylsulfonium triflate (MAPDST) and/or methylmethacrylate (MMA) yielded a new series of POM/polymer hybrids that were characterized by ¹H, ³¹P NMR and IR spectroscopic techniques, gel‐permeation chromatography as well as thermal analyses. Preliminary tests were conducted on these POM/polymer hybrids to evaluate their properties as photoresists using electron beam (E‐beam)/extreme ultraviolet (EUV) lithographic techniques. It was observed that the POM/polymer hybrid of 2 with MAPDST exhibited improved sensitivity under EUV lithographic conditions in comparison to the MAPDST homopolymer resist possibly due to the efficient photon harvesting by the POM clusters from the EUV source.     

Nano‐Star‐Shaped Polymers for Drug Delivery Applications

With the advancement of polymer engineering, complex star‐shaped polymer architectures can be synthesized with ease, bringing about a host of unique properties and applications. The polymer arms can be functionalized with different chemical groups to fine‐tune the response behavior or be endowed with targeting ligands or stimuli responsive moieties to control its physicochemical behavior and self‐organization in solution. Rheological properties of these solutions can be modulated, which also facilitates the control of the diffusion of the drug from these star‐based nanocarriers. However, these star‐shaped polymers designed for drug delivery are still in a very early stage of development. Due to the sheer diversity of macromolecules that can take on the star architectures and the various combinations of functional groups that can be cross‐linked together, there remain many structure–property relationships which have yet to be fully established. This review aims to provide an introductory perspective on the basic synthetic methods of star‐shaped polymers, the properties which can be controlled by the unique architecture, and also recent advances in drug delivery applications related to these star candidates.     

Preparation and Characterization of Composites that Contain Small Carbon Nano‐Onions and Conducting Polyaniline

Small multilayer fullerenes, also known as carbon nano‐onions (CNOs; 5–6 nm in diameter, 6–8 shells), show higher reactivity than other larger carbon nanostructures. Here we report the first example of an in situ polymerization of aniline on phenyleneamine‐terminated CNO surfaces. The green, protonated, conducting emeraldine polyaniline (PANI) was directly synthesized on the surface of the CNO. The functionalized and soluble CNO/PANI composites were characterized by TEM, SEM, DSC, Raman, and infrared spectroscopy. The electrochemical properties of the conducting CNO/PANI films were also investigated. In comparison with pristine CNOs, functionalized carbon nanostructures show dramatically improved solubility in protic solvents, thus enabling their easy processing for coatings, nanocomposites, and biomedical applications.     

Electrochemical Properties of Oxidized Carbon Nano‐Onions: DRIFTS‐FTIR and Raman Spectroscopic Analyses

The electrochemical reactions of carboxylic and lactone groups on carbon nano‐onions (CNOs) in aqueous solutions result in non‐Kolbe products: alcohols, ketones, ethers and epoxides. The anodic/cathodic conversion of ox‐CNOs was assessed by Boehm titrations and by Raman and DRIFTS‐FTIR (diffuse reflectance infrared Fourier transform spectroscopy). The electrochemical properties of oxidized carbon nano‐onions were investigated by cyclic voltammetry in aqueous solutions. The ox‐CNOs are electrochemically active as a result of the reduction of the oxygen‐containing groups.     

Carbon Nanotube and Gold‐Based Materials: A Symbiosis

Carbon nanotubes constitute a novel class of nanomaterials with potential applications in many areas. The attachment of metal nanoparticles to carbon nanotubes is new way to obtain novel hybrid materials with interesting properties for various applications such as catalysts and gas sensors as well as electronic and magnetic devices. Their unique properties such as excellent electronic properties, a good chemical stability, and a large surface area make carbon nanotubes very useful as a support for gold nanoparticles in many potential applications, ranging from advanced catalytic systems through very sensitive electrochemical sensors and biosensors to highly efficient fuel cells. Here we give an overview on the recent progress in this area by exploring the various synthesis approaches and types of assemblies, in which nanotubes can be decorated with gold nanoparticles and explore the diverse applications of the resulting composites.     

Influence of the Synthetic Conditions on the Structural and Electrochemical Properties of Carbon Nano‐Onions

Thermal annealing of nanodiamonds with diameters of a few nanometers (in an inert atmosphere and at temperatures in the range: 1500–1800 °C) leads to the formation of carbon nano‐onions (CNOs) with diameters between 5 and 6 nm, which correspond to nanostructures with six to eight graphitic layers. The resulting spherical CNO structures were thermally modified under different atmospheres and characterized by SEM, TEM, thermogravimetric analysis and spectroscopic (Raman and diffuse reflectance infrared Fourier transform/FTIR) spectroscopy. The electrochemical properties of the CNOs prepared under different conditions were determined and compared. The results reveal that the CNOs show different structures with predominant spherical “small” carbon nano‐onions. The aim of this article is to investigate the impact of the CNO′s synthesis conditions on the resulting structures and study the effect of further thermal modifications on the sizes, shapes and homogeneity of these carbon nanostructures.     

Chemical versus Electrochemical Synthesis of Carbon Nano‐onion/Polypyrrole Composites for Supercapacitor Electrodes

The development of high‐surface‐area carbon electrodes with a defined pore size distribution and the incorporation of pseudo‐active materials to optimize the overall capacitance and conductivity without destroying the stability are at present important research areas. Composite electrodes of carbon nano‐onions (CNOs) and polypyrrole (Ppy) were fabricated to improve the specific capacitance of a supercapacitor. The carbon nanostructures were uniformly coated with Ppy by chemical polymerization or by electrochemical potentiostatic deposition to form homogenous composites or bilayers. The materials were characterized by transmission‐ and scanning electron microscopy, differential thermogravimetric analyses, FTIR spectroscopy, piezoelectric microgravimetry, and cyclic voltammetry. The composites show higher mechanical and electrochemical stabilities, with high specific capacitances of up to about 800 F g^?1 for the CNOs/SDS/Ppy composites (chemical synthesis) and about 1300 F g^?1 for the CNOs/Ppy bilayer (electrochemical deposition).     

Synthesis of Spin‐Crossover Nano‐ and Micro‐objects in Homogeneous Media

New methods are proposed for the synthesis of spin‐crossover nano‐ and micro‐objects. Several nano‐objects that are based upon the spin‐crossover complex [Fe(hptrz)₃](OTs)₂ (hptrz=4‐heptyl‐1,2,4‐triazole, Ts=para‐toluenesulfonyl) were prepared in homogeneous media. The use of various reagents (Triton X‐100, PVP, TOPO, and PEGs of different molecular weights) as stabilizing agents yielded materials of different size (6 nm–2 μm) and morphology (nanorods, nanoplates, small spherical particles, and nano‐ and micro‐crystals). In particular, when Triton X‐100 was used, a variation in the morphology from nanorods to nanoplates was observed by changing the nature of the solvent. Interestingly, the preparation of the nanorods and nanoplates was always accompanied by the formation of small spherical particles. Alternatively, when PEG was used, 200–400 nm crystals of the complex were obtained. In addition, a very promising polymer‐free synthetic method is discussed that was based on the preparation of relatively stable Fe^II–triazole oligomers in CHCl₃. Their specific treatment led to micro‐crystals, small nanoparticles, or gels. The size and morphology of all of these objects were characterized by TEM and by dynamic light scattering (DLS) where possible. Their spin‐crossover behavior was studied by optical and magnetic measurements. The spin‐transition features for large particles (>100 nm) were very similar to that of the bulk material, that is, close to room temperature with a hysteresis width of up to 8 K. The effects of the matrix and/or size‐reduction led to modification of the transition temperature and an abruptness of the spin transition for oligomeric solutions and small nanoparticles of 6 nm in size.     

Incorporation of Glycine Carbon Atoms into Melanoidin Polymers

Incorporation of C atoms of 1-[¹⁴C]-glycine and 2-[¹⁴C]-glycine into melanoidin polymers (>3500 Da) was studied for the reaction of glycine and D-glucose.__________Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 272–274, May–June, 2005.     

Nanocomposites of Size‐Tunable ZnO‐Nanoparticles and Amphiphilic Hyperbranched Polymers

Highly dispersed ZnO nanoparticles with variable particle sizes were successfully prepared within an amphiphilic hyperbranched polyetherpolyol matrix via decomposition of an organometallic precursor in the presence of air leading to stable nanocomposites. The high degree of stabilization during and after the synthesis by the polymer permits control over the nanoparticle size and therefore, due to the quantum‐size‐effect, the particle properties. Furthermore, these polymer‐inorganic nanocomposites can easily be dispersed in apolar solvents to yield highly transparent, stable solutions.

     

Recent Developments Concerning the Dispersion of Carbon Nanotubes in Polymers

The ability to control the dispersion of carbon nanotubes in polymers is key to most applications of nanotube‐polymer composites. This feature article describes recent advances in methods used to disperse carbon nanotubes and considers how these methods affect dispersion on different length scales. It is becoming increasing clear that perfect dispersion is not desired for many applications, in particular for electrical conductivity, and controlling the dispersion is key for proper function of the composite in its intended application.

     

Biocompatible Infinite‐Coordination‐Polymer Nanoparticle–Nucleic‐Acid Conjugates for Antisense Gene Regulation

Herein, we report the synthesis of DNA‐functionalized infinite‐coordination‐polymer (ICP) nanoparticles as biocompatible gene‐regulation agents. ICP nanoparticles were synthesized from ferric nitrate and a ditopic 3‐hydroxy‐4‐pyridinone (HOPO) ligand bearing a pendant azide. Addition of Fe^III to a solution of the ligand produced nanoparticles, which were colloidally unstable in the presence of salts. Conjugation of DNA to the Fe^III–HOPO ICP particles by copper‐free click chemistry afforded colloidally stable nucleic‐acid nanoconstructs. The DNA–ICP particles, when cross‐linked through sequence‐specific hybridization, exhibited narrow, highly cooperative melting transitions consistent with dense DNA surface loading. The ability of the DNA–ICP particles to enter cells and alter protein expression was also evaluated. Our results indicate that these novel particles carry nucleic acids into mammalian cells without the need for transfection agents and are capable of efficient gene knockdown.     

Design of Metal‐Free Polymer Carbon Dots: A New Class of Room‐Temperature Phosphorescent Materials

Polymer carbon dots (PCDs) are proposed as a new class of room‐temperature phosphorescence (RTP) materials. The abundant energy levels in PCDs increase the probability of intersystem crossing (ISC) and their covalently crosslinked framework structures greatly suppress the nonradiative transitions. The efficient methods allow the manufacture of PCDs with unique RTP properties in air without additional metal complexation or complicated matrix composition. They thus provide a route towards the rational design of metal‐free RTP materials that may be synthesized easily. Furthermore, we find that RTP is associated with a crosslink‐enhanced emission (CEE) effect, which provides further routes to design improved PCDs with diverse RTP performance. Our results show the potential of PCDs as a universal route to achieve effective metal‐free RTP.     

Highly Efficient,Conjugated‐Polymer‐Based Nano‐Photosensitizers for Selectively Targeted Two‐Photon Photodynamic Therapy and Imaging of Cancer Cells

Two‐photon photodynamic therapy (2P‐PDT) is a promising noninvasive treatment of cancers and other diseases with three‐dimensional selectivity and deep penetration. However, clinical applications of 2P‐PDT are limited by small two‐photon absorption (TPA) cross sections of traditional photosensitizers. The development of folate receptor targeted nano‐photosensitizers based on conjugated polymers is described. In these nano‐photosensitizers, poly{9,9‐bis[6′′‐(bromohexyl)fluorene‐2,7‐ylenevinylene]‐co‐alt‐1,4‐(2,5‐dicyanophenylene)}, which is a conjugated polymer with a large TPA cross section, acts as a two‐photon light‐harvesting material to significantly enhance the two‐photon properties of the doped photosensitizer tetraphenylporphyrin (TPP) through energy transfer. These nanoparticles displayed up to 1020‐fold enhancement in two‐photon excitation emission and about 870‐fold enhancement in the two‐photon‐induced singlet oxygen generation capability of TPP. Surface‐functionalized folic acid groups make these nanoparticles highly selective in targeting and killing KB cancer cells over NIH/3T3 normal cells. The 2P‐PDT activity of these nanoparticles was significantly improved, potentially up to about 1000 times, as implied by the enhancement factors of two‐photon excitation emission and singlet oxygen generation. These nanoparticles could act as novel two‐photon nano‐photosensitizers with combined advantages of low dark cytotoxicity, targeted 2P‐PDT with high selectivity, and simultaneous two‐photon fluorescence imaging capability; these are all required for ideal two‐photon photosensitizers.     

Synthesis and properties of magnetite/poly (aniline‐co‐8‐amino‐2‐naphthalenesulfonic acid) (SPAN) nanocomposites

Composites were prepared by incorporating magnetite (Fe₃O₄) nanoparticles into the matrix of a sulfonated polyaniline (SPAN) [poly(aniline‐co‐8‐amino‐2‐naphthalenesulfonic acid) PANSA] through chemical oxidative polymerization of a mixture of aniline and 8‐amino‐2‐naphthalenesulfonic acid in the presence of magnetite nanoparticles. The composite, magnetite/SPAN(PANSA) was characterized by means of transmission electron microscopy (TEM), X‐ray diffraction (XRD), elemental analysis (EA), Fourier transform infrared (FT‐IR) spectra, UV‐vis spectroscopy, thermogravimetric analysis (TGA), conductivity and magnetic properties measurements. TEM image shows that magnetite nanoparticles were finely distributed into the SPAN matrix. XRD pattern of the nanocomposite reveals the presence of additional crystalline order through the appearance of a sharp peak at ～43° and 71°. Conductivity of the nanocomposite (0.23 S/cm) is much higher than pristine copolymer (1.97 × 10^?2 S/cm). The results of FT‐IR and UV‐visible spectroscopy reveal the presence of molecular level interactions between SO groups in SPAN and magnetite nanoparticles in the composite. Copyright © 2006 John Wiley & Sons, Ltd.