Partial Charge Transfer in the Shortest Possible Metallofullerene Peapod,La@C82⊂[11]Cycloparaphenylene

[11]Cycloparaphenylene ([11]CPP) selectively encapsulates La@C₈₂ to form the shortest possible metallofullerene–carbon nanotube (CNT) peapod, La@C₈₂?[11]CPP, in solution and in the solid state. Complexation in solution was affected by the polarity of the solvent and was 16 times stronger in the polar solvent nitrobenzene than in the nonpolar solvent 1,2‐dichlorobenzene. Electrochemical analysis revealed that the redox potentials of La@C₈₂ were negatively shifted upon complexation from free La@C₈₂. Furthermore, the shifts in the redox potentials increased with polarity of the solvent. These results are consistent with formation of a polar complex, (La@C₈₂)^δ??[11]CPP^δ+, by partial electron transfer from [11]CPP to La@C₈₂. This is the first observation of such an electronic interaction between a fullerene pea and CPP pod. Theoretical calculations also supported partial charge transfer (0.07) from [11]CPP to La@C₈₂. The structure of the complex was unambiguously determined by X‐ray crystallographic analysis, which showed the La atom inside the C₈₂ near the periphery of the [11]CPP. The dipole moment of La@C₈₂ was projected toward the CPP pea, nearly perpendicular to the CPP axis. The position of the La atom and the direction of the dipole moment in La@C₈₂?[11]CPP were significantly different from those observed in La@C₈₂?CNT, thus indicating a difference in orientation of the fullerene peas between fullerene–CPP and fullerene–CNT peapods. These results highlight the importance of pea–pea interactions in determining the orientation of the metallofullerene in metallofullerene–CNT peapods.     

Advantages and Potential of Lipid‐Membrane‐Incorporating Fullerenes Prepared by the Fullerene‐Exchange Method

Lipid‐membrane‐incorporating C₆₀ and C₇₀ (LMIC₆₀ and LMIC₇₀) were prepared by the fullerene‐exchange reaction from the γ‐cyclodextrin cavity to vesicles (we call this method the “exchange method”). An advantage of this method is that the ratios of [C₆₀]/[lipids] and [C₇₀]/[lipids] can be arbitrarily controlled by adjusting the ratios of the fullerenes and liposome. The maximum ratio (30 mol %) obtained was approximately 14 and 100 times higher than those achieved for LMIC₆₀ and LMIC₇₀, respectively, that were prepared by the classical method, which we call the “premixing method” (dissolving lipids and C₆₀ or C₇₀ in chloroform, followed by concentration and extraction with water). Furthermore, the stabilities and photodynamic activities of the LMIC₆₀ and LMIC₇₀ solutions prepared by the exchange method were shown to be much higher than those prepared by the premixing method. That is, the exchange method was found to be superior to the premixing method as a preparative method of LMIC₆₀ and LMIC₇₀ for applications in photomedical and photomaterials chemistry.     

[6,6]‐Open and [6,6]‐Closed Isomers of C70(CF2): Synthesis,Electrochemical and Quantum Chemical Investigation

Novel difluoromethylenated [70]fullerene derivatives, C₇₀(CF₂)_n (n=1–3), were obtained by the reaction of C₇₀ with sodium difluorochloroacetate. Two major products, isomeric C₇₀(CF₂) mono‐adducts with [6,6]‐open and [6,6]‐closed configurations, were isolated and their homofullerene and methanofullerene structures were reliably determined by a variety of methods that included X‐ray analysis and high‐level spectroscopic techniques. The [6,6]‐open isomer of C₇₀(CF₂) constitutes the first homofullerene example of a non‐hetero [70]fullerene derivative in which functionalisation involves the most reactive bond in the polar region of the cage. Voltammetric estimation of the electron affinity of the C₇₀(CF₂) isomers showed that it is substantially higher for the [6,6]‐open isomer (the 70‐electron π‐conjugated system is retained) than the [6,6]‐closed form, the latter being similar to the electron affinity of pristine C₇₀. In situ ESR spectroelectrochemical investigation of the C₇₀(CF₂) radical anions and DFT calculations of the hyperfine coupling constants provide evidence for the first example of an inter‐conversion between the [6,6]‐closed and [6,6]‐open forms of a cage‐modified fullerene driven by an electrochemical one‐electron transfer. Thus, [6,6]‐closed C₇₀(CF₂) constitutes an interesting example of a redox‐switchable fullerene derivative.     

A Supramolecular [10]CPP Junction Enables Efficient Electron Transfer in Modular Porphyrin–[10]CPP⊃Fullerene Complexes

Efficient photoinduced electron transfer was observed across a [10]cycloparaphenylene ([10]CPP) moiety that serves as a rigid non‐covalent bridge between a zinc porphyrin and a range of fullerenes. The preparation of iodo‐[10]CPP is the key to the synthesis of a porphyrin–[10]CPP conjugate, which binds C₆₀, C₇₀, (C₆₀)₂, and other fullerenes (K_A>10⁵ m ^?1). Fluorescence and pump–probe spectroscopy revealed intramolecular energy transfer between CPP and porphyrin and also efficient charge separation between porphyrin and fullerenes, affording up to 0.5 μs lifetime charge‐separated states. The advantage of this approach towards electron donor–acceptor dyads is evident in the case of dumbbell‐shaped (C₆₀)₂, which gave intricate charge‐transfer behavior in 1:1 and 2:1 complexes. These results suggest that [10]CPP and its cross‐coupled derivatives could act as supramolecular mediators of charge transport in organic electronic devices.     

Isoindigo‐3,4‐Difluorothiophene Polymer Acceptors Yield “All‐Polymer” Bulk‐Heterojunction Solar Cells with over 7 % Efficiency

Poly(isoindigo‐alt‐3,4‐difluorothiophene) (PIID[2F]T) analogues used as “polymer acceptors” in bulk‐heterojunction (BHJ) solar cells achieve >7 % efficiency when used in conjunction with the polymer donor PBFTAZ (model system; copolymer of benzo[1,2‐b:4,5‐b′]dithiophene and 5,6‐difluorobenzotriazole). Considering that most efficient polymer‐acceptor alternatives to fullerenes (e.g. PC₆₁BM or its C₇₁ derivative) are based on perylenediimide or naphthalenediimide motifs thus far, branched alkyl‐substituted PIID[2F]T polymers are particularly promising non‐fullerene candidates for “all‐polymer” BHJ solar cells.     

Synthesis,characterization, and application to polymer solar cells of polythiophene derivatives with ester‐ or ketone‐substituted phenyl side groups

Four polythiophene derivatives including regiorandom polymers P1 , P2 , and P3 and a regioregular polymer P4 , containing a phenyl side chain with electron‐withdrawing carbonyl groups such as an ester and a ketone at the 3‐position of the thiophene ring, were synthesized by Stille coupling reaction. Bulk‐heterojunction polymer solar cells (PSCs) based on these polymers as p‐type semiconductors and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) were fabricated, and their photovoltaic performances were evaluated for the first time. The PSC devices based on the regioregular polymer P4 :PCBM = 1:2 (w/w) exhibited a high‐open‐circuit voltage (V_oc) of 0.943 V because of the low‐lying highest occupied molecular orbit energy level of P4 . The short π–π stacking distance (0.355 nm) in the parallel direction to the substrate and “face‐on” rich orientation were observed by the grazing incidence wide‐angle X‐ray scattering experiment, which might reflect higher J_sc and FF values of the P4 :[6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) PSC device than others. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 875–887     

1‐[5‐(4,5‐Dimethyl‐1,3,2‐dioxaborolan‐2‐yl)thiophen‐2‐yl]ethanone and 4‐(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)benzaldehyde

In both title compounds, C₁₀H₁₃BO₃S, (I), and C₁₃H₁₇BO₃, (II), the molecules adopt nearly planar conformations. The crystal packing of (I) consists of a supramolecular two‐dimensional network with a herringbone‐like topology formed by self assembly of centrosymmetric pairs of molecules linked via dipole–dipole interactions. The crystal structure of (II) consists of a supramolecular two‐dimensional network built up from centrosymmetric pairs of molecules viaπ–π interactions. These pairs of molecules are self‐organized in an offset fashion related by a symmetry centre, generating supramolecular ribbons running along the [101] direction. Neighbouring ribbons are stacked via complementary van der Waals and hydrophobic methyl–methyl interactions.     

2,6‐Di­phenylthiapyran‐4‐one

In the title compound, 2,6‐di­phenyl­thia­cyclo­hexan‐4‐one, C₁₇H₁₆OS, mirror site symmetry is retained by the mol­ecule in the solid state in the absence of C—H?X hydrogen bonds. The crystal structure is stabilized by van der Waals interactions, the shortest S?O and C?O contacts being 3.567 (2) and 3.512 (3) Å, respectively.     

Solvent‐Induced Cluster‐to‐Cluster Transformation of Homoleptic Gold(I) Thiolates between Catenane and Ring‐in‐Ring Structures

Supramolecular ensembles adopting ring‐in‐ring structures are less developed compared with catenanes featuring interlocked rings. While catenanes with inter‐ring closed‐shell metallophilic interactions, such as d¹⁰–d¹⁰ Au^I–Au^I interactions, have been well‐documented, the ring‐in‐ring complexes featuring such metallophilic interactions remain underdeveloped. Herein is described an unprecedented ring‐in‐ring structure of a Au^I‐thiolate Au₁₂ cluster formed by recrystallization of a Au^I‐thiolate Au₁₀ [2]catenane from alkane solvents such as hexane, with use of a bulky dibutylfluorene‐2‐thiolate ligand. The ring‐in‐ring Au^I‐thiolate Au₁₂ cluster features inter‐ring Au^I–Au^I interactions and underwent cluster core change to form the thermodynamically more stable Au₁₀ [2]catenane structure upon dissolving in, or recrystallization from, other solvents such as CH₂Cl₂, CHCl₃, and CH₂Cl₂/MeCN. The cluster‐to‐cluster transformation process was monitored by ¹H NMR and ESI‐MS measurements. Density functional theory (DFT) calculations were performed to provide insight into the mechanism of the “ring‐in‐ring? [2]catenane” interconversions.     

A Large π‐Extended Carbon Nanoring Based on Nanographene Units: Bottom‐Up Synthesis,Photophysical Properties,and Selective Complexation with Fullerene C70

Herein we report the organoplatinum‐mediated bottom‐up synthesis, characterization, and properties of a novel large π‐extended carbon nanoring based on a nanographene hexa‐peri ‐hexabenzocoronene (HBC) building unit. This tubular structure can be considered as an example of the longitudinal extension of the cycloparaphenylene scaffold to form a large π‐extended carbon nanotube (CNT) segment. The cyclic tetramer of a tetramesityl HBC ([4]CHBC) was synthesized by the reaction of a 2,11‐diborylated hexa‐peri ‐hexabenzocoronene with a platinum complex, followed by reductive elimination. The structure of this tubular molecule was further confirmed by physical characterization. Theoretical calculations indicate that the strain energy of this nanoring is as high as 49.18 kcal mol⁻¹. The selective supramolecular host–guest interaction between [4]CHBC and C₇₀ was also investigated.     

A Large π‐Extended Carbon Nanoring Based on Nanographene Units: Bottom‐Up Synthesis,Photophysical Properties,and Selective Complexation with Fullerene C70

Herein we report the organoplatinum‐mediated bottom‐up synthesis, characterization, and properties of a novel large π‐extended carbon nanoring based on a nanographene hexa‐peri ‐hexabenzocoronene (HBC) building unit. This tubular structure can be considered as an example of the longitudinal extension of the cycloparaphenylene scaffold to form a large π‐extended carbon nanotube (CNT) segment. The cyclic tetramer of a tetramesityl HBC ([4]CHBC) was synthesized by the reaction of a 2,11‐diborylated hexa‐peri ‐hexabenzocoronene with a platinum complex, followed by reductive elimination. The structure of this tubular molecule was further confirmed by physical characterization. Theoretical calculations indicate that the strain energy of this nanoring is as high as 49.18 kcal mol⁻¹. The selective supramolecular host–guest interaction between [4]CHBC and C₇₀ was also investigated.     

1‐Benzoyl‐3‐[(2‐benzylsulfanyl)phenyl]thiourea

In the title compound, C₂₁H₁₈N₂OS₂, a strong intramolecular N—H...O hydrogen bond [N...O = 2.642 (3) Å] between the amide N atom and the benzoyl O atom forms an almost planar six‐membered ring in the central part of the molecule. In the crystal, molecules are packed through weak N—H...S interactions. Intra‐ and intermolecular hydrogen bonds and van der Waals interactions are the stabilizing forces for the crystal structure.     

Polymorphism of the dinuclear CoIII–Schiff base complex [Co2(o‐van‐en)3]·4CH3CN (o‐van‐en is a salen‐type ligand)

Reactions of Co(OH)₂ with the Schiff base bis(2‐hydroxy‐3‐methoxybenzylidene)ethylenediamine, denoted H₂(o‐van‐en), under different conditions yielded the previously reported complex aqua[bis(3‐methoxy‐2‐oxidobenzylidene)ethylenediamine]cobalt(II), [Co(C₁₈H₁₈N₂O₄)(H₂O)], 1 , under anaerobic conditions and two polymorphs of [μ‐bis(3‐methoxy‐2‐oxidobenzylidene)ethylenediamine]bis{[bis(3‐methoxy‐2‐oxidobenzylidene)ethylenediamine]cobalt(III)} acetonitrile tetrasolvate, [Co₂(C₁₈H₁₈N₂O₄)₃]·4CH₃CN, i.e. monoclinic 2 and triclinic 3 , in the presence of air. Both novel polymorphs were chemically and spectroscopically characterized. Their crystal structures are built up of centrosymmetric dinuclear [Co₂(o‐van‐en)₃] complex molecules, in which each Co^III atom is coordinated by one tetradentate dianionic o‐van‐en ligand in an uncommon bent fashion. The pseudo‐octahedral coordination of the Co^III atom is completed by one phenolate O and one amidic N atom of the same arm of the bridging o‐van‐en ligand. In addition, the asymmetric units of both polymorphs contain two acetonitrile solvent molecules. The polymorphs differ in the packing orders of the dinuclear [Co₂(o‐van‐en)₃] complex molecules, i.e. alternating ABABAB in 2 and AAA in 3 . In addition, differences in the conformations, the positions of the acetonitrile solvent molecules and the pattern of intermolecular interactions were observed. Hirshfeld surface analysis permits a qualitative inspection of the differences in the intermolecular space in the two polymorphs. A knowledge‐based study employing Full Interaction Maps was used to elucidate possible reasons for the polymorphism.     

Electronic Communication between two [10]cycloparaphenylenes and Bis(azafullerene) (C59N)2 Induced by Cooperative Complexation

The complex of [10]cycloparaphenylene ([10]CPP) with bis(azafullerene) (C₅₉N)₂ is investigated experimentally and computationally. Two [10]CPP rings are bound to the dimeric azafullerene giving [10]CPP?(C₅₉N)₂?[10]CPP. Photophysical and redox properties support an electronic interaction between the components especially when the second [10]CPP is bound. Unlike [10]CPP?C₆₀, in which there is negligible electronic communication between the two species, upon photoexcitation a partial charge transfer phenomenon is revealed between [10]CPP and (C₅₉N)₂ reminiscent of CPP‐encapsulated metallofullerenes. Such an alternative electron‐rich fullerene species demonstrates C₆₀‐like ground‐state properties and metallofullerene‐like excited‐state properties opening new avenues for construction of functional supramolecular architectures with organic materials.     

Theoretical Insights into Chirality‐Controlled SWCNT Growth from a Cycloparaphenylene Template

A self‐assembly mechanism for low‐temperature SWCNT growth from a [6]cycloparaphenylene ([6]CPP) precursor via ethynyl (C₂H) radical addition is presented, based on non‐equilibrium quantum chemical molecular dynamics (QM/MD) simulations and density functional theory (DFT) calculations. This mechanism, which maintains the (6,6) armchair chirality of a SWCNT fragment throughout the growth process, is energetically more favorable than a previously proposed Diels–Alder‐based growth mechanisms [E. H. Fort, et al., J. Mater. Chem. 2011 , 21, 1373]. QM/MD simulations and DFT calculations show that C₂H radicals play dual roles during SWCNT growth, by abstracting hydrogen from the SWCNT fragment and providing the carbon source necessary for growth itself. Simulations demonstrate that chirality‐controlled SWCNT growth from macrocyclic hydrocarbon seed molecules with pre‐selected edge structure can be accomplished when the reaction conditions are carefully selected for hydrogen abstraction by radical species during the growth process.     

catena‐Poly[[[μ‐1,3‐bis(diphenylphosphanyl)propane‐κ2P:P′][O‐ethyl (4‐methoxyphenyl)phosphonodithioato‐κ2S,S′]silver(I)] chloroform monosolvate]

Reaction of a mixture of AgOAc, Lawesson's reagent [2,4‐bis(4‐methoxyphenyl)‐1,3‐dithiadiphosphetane‐2,4‐disulfide] and 1,3‐bis(diphenylphosphanyl)propane (dppp) under ultrasonic treatment gave the title compound, {[Ag(C₉H₁₂O₂PS₂)(C₂₇H₂₆P₂)]·CHCl₃}_n, a novel one‐dimensional chain based on the in situ‐generated bipodal ligand [ArP(OEt)S₂]⁻ (Ar = 4‐methoxyphenyl). The compound consists of bidentate bridging 1,3‐bis(diphenylphosphanyl)propane (dppp) and in situ‐generated bidentate chelating [ArP(OEt)S₂]⁻ ligands. The dppp ligand links the [Ag{ArP(OEt)S₂}] subunit to form an achiral one‐dimensional infinite chain. These achiral chains are packed into chiral crystals by virtue of van der Waals interactions. No π–π interactions are observed in the crystal structure.     

3,17‐Dioxoandrost‐4‐en‐4‐yl acetate

The title compound, C₂₁H₂₈O₄, has a 4‐acetoxy substituent positioned on the steroid α face. The six‐membered ring A assumes a conformation intermediate between 1α,2β‐half chair and 1α‐sofa. A long Csp³—Csp³ bond is observed in ring B and reproduced in quantum‐mechanical ab initio calculations of the isolated molecule using a molecular‐orbital Hartree–Fock method. Cohesion of the crystal can be attributed to van der Waals interactions and weak C—H...O hydrogen bonds.     

Flip‐type disorder in 3‐substituted 2,2′:5′,2′′‐terthiophenes

In the crystal structures of four thiophene derivatives, (E)‐3′‐[2‐(anthracen‐9‐yl)ethenyl]‐2,2′:5′,2′′‐terthiophene, C₂₈H₁₈S₃, (E)‐3′‐[2‐(1‐pyrenyl)ethenyl]‐2,2′:5′,2′′‐terthiophene, C₃₀H₁₈S₃, (E)‐3′‐[2‐(3,4‐dimethoxyphenyl)ethenyl]‐2,2′:5′,2′′‐terthiophene, C₂₂H₁₈O₂S₃, and (E,E)‐1,4‐bis[2‐(2,2′:5′,2′′‐terthiophen‐3′‐yl)ethenyl]‐2,5‐dimethoxybenzene, C₃₆H₂₆O₂S₆, at least one of the terminal thiophene rings is disordered and the disorder is of the flip type. The terthiophene fragments are far from being coplanar, contrary to terthiophene itself. The central C—C=C—C fragments are almost planar but the bond lengths suggest slight delocalization within this fragment. The crystal packing is determined by van der Waals interactions and some weak, relatively short, C—H...S and C—H...π directional contacts.     

Viox,a COX‐II inhibitor

Viox {2,5‐di­hydro‐4‐[4‐(methyl­sulfonyl)­phenyl]‐3‐phenyl‐2‐furan­one, C₁₇H₁₄O₄S, (I)} is one of the selective COX‐II inhibitors with anti‐arthritic activity. The absolute structure of viox has been determined on the basis of anomalous scattering effects. Molecules are held together in the crystal structure only by normal van der Waals interactions.     

Structural characterization,gelation ability,and energy‐framework analysis of two bis(long‐chain ester)‐substituted 4,4′‐biphenyl compounds

There are few examples of single‐crystal structure determinations of gelators, as gel formation requires that the dissolved gelator self‐assemble into a three‐dimensional network structure incorporating solvent via noncovalent interactions rather than self‐assembly followed by crystallization. In the solid‐state structures of the isostructural compounds 4,4′‐bis[5‐(methoxycarbonyl)pentyloxy]biphenyl (BBO6‐Me), C₂₆H₃₄O₆, and 4,4′‐bis[5‐(ethoxycarbonyl)pentyloxy]biphenyl (BBO6‐Et), C₂₈H₃₈O₆, the molecules sit on a crystallographically imposed center of symmetry, resulting in strictly coplanar phenyl rings. BBO6‐Me behaves as an organogelator in various alcohol solvents, whereas BBO6‐Et does not. The extended structure reveals bundles of molecules that form a columnar superstructure. Framework‐energy calculations reveal much stronger interaction energies within the columns (−52 to −78 kJ mol⁻¹) than between columns (−2 to −16 kJ mol⁻¹). The intracolumnar interactions are dominated by a dispersion component, whereas the intercolumnar interactions have a substantial electrostatic component.