Mechanistic Insight into the Copper‐Catalyzed Regiodivergent Silacarboxylation of Allenes with CO2

DFT calculations were performed to investigate the detailed reaction mechanisms in the copper‐catalyzed regiodivergent silacarboxylation of allenes. According to our calculations, the catalysis would bifurcate at the allene silylcupration step, followed by CO₂ insertion, eventually leading to the carboxylated vinylsilane or allylsilane products. The gaps between the two silylcupration barriers were predicted to be ?2.3, ?0.4, and 2.2 kcal mol^?1 when using (rac)‐Me‐DuPhos, dcpe, and PCy₃ (+H₂O) as the ligands, which nicely accounted for the experimental vinylsilane/allylsilane ratios of 93:7, 50:50, and 15:85, respectively. By means of transition‐state‐energy decomposition, we found that the energy penalty of catalyst deformation into its transition‐state geometry was the key factor in determining the direction of the reaction. The switchable regioselectivity by using different P ligands could be ascribed to structural changes of the Cu?Si and Cu?P bonds during the silylcupration process.     

Mechanistic Origin of Cross‐Coupling Selectivity in Ni‐Catalysed Tishchenko Reactions

Mechanistic studies have been performed for the recently developed, Ni‐catalysed selective cross‐coupling reaction between aryl and alkyl aldehydes. A mono‐carbonyl activation (MCA) mechanism (in which one of the carbonyl groups is activated by oxidative addition) was found to be the most favourable pathway, and the rate‐determining step is oxidative addition. Analysing the origin of the observed cross‐coupling selectivity, we found the most favourable carbonyl activation step requires both coordination of the aryl aldehyde and oxidative addition of the alkyl aldehyde. Therefore, the stronger π‐accepting ability of the aryl aldehyde (relative to alkyl aldehyde) and the ease of oxidative addition of the alkyl aldehyde (relative to aryl aldehyde) are responsible for the cross‐coupling selectivity.     

Mechanistic Insights into the Rhenium‐Catalyzed Alcohol‐To‐Olefin Dehydration Reaction

Rhenium‐based complexes are powerful catalysts for the dehydration of various alcohols to the corresponding olefins. Here, we report on both experimental and theoretical (DFT) studies into the mechanism of the rhenium‐catalyzed dehydration of alcohols to olefins in general, and the methyltrioxorhenium‐catalyzed dehydration of 1‐phenylethanol to styrene in particular. The experimental and theoretical studies are in good agreement, both showing the involvement of several proton transfers, and of a carbenium ion intermediate in the catalytic cycle.     

Mechanistic Origin of Chemoselectivity in Thiolate‐Catalyzed Tishchenko Reactions

The thiolate‐catalyzed Tishchenko reaction has shown high chemoselectivity for the formation of double aromatic‐substituted esters. In the present study, the detailed reaction mechanism and, in particular, the origin of the observed high chemoselectivity, have been studied with DFT calculations. The catalytic cycle mainly consisted of three steps: 1,2‐addition, hydride transfer, and acyl transfer steps. The calculation results reproduce the experimental observations that 4‐chlorobenzaldehyde acts as the hydrogen donor (carbonyl part in the ester product), while 2‐methoxybenzaldehyde acts as the hydrogen acceptor (alcohol part in the product). The two main factors are responsible for such chemoselectivity: 1) in the rate‐determining hydride transfer step, the para‐chloride substituent facilitates the hydride‐donating process by weakening the steric hindrance, and 2) the ortho‐methoxy substituent facilitates the hydride‐accepting process by stabilizing the magnesium center (by compensating for the electron deficiency).     

Copper Versus Thioether‐Centered Oxidation: Mechanistic Insights into the Non‐Innocent Redox Behavior of Tripodal Benzimidazolylaminothioether Ligands

A series of Cu⁺ complexes with ligands that feature varying numbers of benzimidazole/thioether donors and methylene or ethylene linkers between the central nitrogen atom and the thioether sulfur atoms have been spectroscopically and electrochemically characterized. Cyclic voltammetry measurements indicated that the highest Cu²⁺/Cu⁺ redox potentials correspond to sulfur‐rich coordination environments, with values decreasing as the thioether donors are replaced by nitrogen‐donating benzimidazoles. Both Cu²⁺ and Cu⁺ complexes were studied by DFT. Their electronic properties were determined by analyzing their frontier orbitals, relative energies, and the contributions to the orbitals involved in redox processes, which revealed that the HOMOs of the more sulfur‐rich copper complexes, particularly those with methylene linkers (? N? CH₂? S? ), show significant aromatic thioether character. Thus, the theoretically predicted initial oxidation at the sulfur atom of the methylene‐bridged ligands agrees with the experimentally determined oxidation waves in the voltammograms of the NS₃‐ and N₂S₂‐type ligands as being ligand‐based, as opposed to the copper‐based processes of the ethylene‐bridged Cu⁺ complexes. The electrochemical and theoretical results are consistent with our previously reported mechanistic proposal for Cu²⁺‐promoted oxidative C? S bond cleavage, which in this work resulted in the isolation and complete characterization (including by X‐ray crystallography) of the decomposition products of two ligands employed, further supporting the novel reactivity pathway invoked. The combined results raise the possibility that the reactions of copper–thioether complexes in chemical and biochemical systems occur with redox participation of the sulfur atom.     

Mechanism of Nickel‐Catalyzed Suzuki–Miyaura Coupling of Amides

The Ni‐catalyzed Suzuki–Miyaura coupling of N ‐tert‐butoxycarbonyl (N ‐Boc)‐protected amides provides a versatile strategy for the construction of C−C bonds. In this study, density functional theory (DFT) methods have been used to elucidate the mechanism of this reaction, with particular emphasis on the roles of N ‐Boc, K₃PO₄ and H₂O. Our results corroborated those of previous reports, indicating that the overall catalytic cycle consists of three steps, including oxidative addition, transmetalation, and reductive elimination. Three of the possible transmetalation mechanisms were examined to interpret the effects of K₃PO₄ and H₂O. According to the most feasible of these transmetalation mechanisms, K₃PO₄ (acting as a Lewis base) would initially interact with the Lewis acid PhBpin to give a K₃PO₄‐PhBpin complex, which would readily undergo a hydrogen transfer step with H₂O. The H transfer in the transmetalation step was determined to be the rate‐determining step. Notably, the theoretical results showed good agreement with the experimental data.     

Mechanistic Insights into Palladium‐Catalyzed Silylation of Aryl Iodides with Hydrosilanes through a DFT Study

The catalytic cycles of palladium‐catalyzed silylation of aryl iodides, which are initiated by oxidative addition of hydrosilane or aryl iodide through three different mechanisms characterized by intermediates R₃Si−Pd^II−H (Cycle A), Ar−Pd^II−I (Cycle B), and Pd^IV (Cycle C), have been explored in detail by hybrid DFT. Calculations suggest that the chemical selectivity and reactivity of the reaction depend on the ligation state of the catalyst and specific reaction conditions, including feeding order of substrates and the presence of base. For less bulky biligated catalyst, Cycle C is energetically favored over Cycle A, through which the silylation process is slightly favored over the reduction process. Interestingly, for bulky monoligated catalyst, Cycle B is energetically more favored over generally accepted Cycle A, in which the silylation channel is slightly disfavored in comparison to that of the reduction channel. Moreover, the inclusion of base in this channel allows the silylated product become dominant. These findings offer a good explanation for the complex experimental observations. Designing a reaction process that allows the oxidative addition of palladium(0) complex to aryl iodide to occur prior to that with hydrosilane is thus suggested to improve the reactivity and chemoselectivity for the silylated product by encouraging the catalytic cycle to proceed through Cycles B (monoligated Pd⁰ catalyst) or C (biligated Pd⁰ catalyst), instead of Cycle A.     

Theoretical Study on the Mechanism of Ni‐Catalyzed Alkyl–Alkyl Suzuki Cross‐Coupling

Ni‐catalyzed cross‐coupling of unactivated secondary alkyl halides with alkylboranes provides an efficient way to construct alkyl–alkyl bonds. The mechanism of this reaction with the Ni/ L1 ( L1 =trans‐N,N′‐dimethyl‐1,2‐cyclohexanediamine) system was examined for the first time by using theoretical calculations. The feasible mechanism was found to involve a Ni^I–Ni^III catalytic cycle with three main steps: transmetalation of [Ni^I( L1 )X] (X=Cl, Br) with 9‐borabicyclo[3.3.1]nonane (9‐BBN)R₁ to produce [Ni^I( L1 )(R₁)], oxidative addition of R₂X with [Ni^I( L1 )(R₁)] to produce [Ni^III( L1 )(R₁)(R₂)X] through a radical pathway, and C? C reductive elimination to generate the product and [Ni^I( L1 )X]. The transmetalation step is rate‐determining for both primary and secondary alkyl bromides. KOiBu decreases the activation barrier of the transmetalation step by forming a potassium alkyl boronate salt with alkyl borane. Tertiary alkyl halides are not reactive because the activation barrier of reductive elimination is too high (+34.7 kcal mol^?1). On the other hand, the cross‐coupling of alkyl chlorides can be catalyzed by Ni/ L2 ( L2 =trans‐N,N′‐dimethyl‐1,2‐diphenylethane‐1,2‐diamine) because the activation barrier of transmetalation with L2 is lower than that with L1 . Importantly, the Ni⁰–Ni^II catalytic cycle is not favored in the present systems because reductive elimination from both singlet and triplet [Ni^II( L1 )(R₁)(R₂)] is very difficult.     

Density Functional Study of Proline‐Catalyzed Intramolecular Baylis–Hillman Reactions

A rationalization of stereoselectivity : The mechanisms of proline‐catalyzed and imidazole‐co‐catalyzed intramolecular Baylis–Hillman reactions have been studied by using density functional theory methods. The computational data has allowed us to rationalize the experimental outcome, validating some of the mechanistic steps proposed in the literature, as well as to propose new ones that considerably change and improve our understanding of the full reaction path (see scheme).

     

Mechanism of Phosphine‐Catalyzed Allene Coupling Reactions: Advances in Theoretical Investigations

Organocatalysis has emerged as an effective strategy for chemical synthesis. Within this area, phosphine‐catalyzed coupling reactions have attracted considerable attention because of their versatility and wide range of applications in the construction of new C?C bonds. Recently, various experimental studies on the phosphine‐catalyzed coupling reaction of allenes have been reported, and mechanistic and computational studies have also progressed considerably. As a nucleophile, phosphine can react with an allene to form a zwitterionic phosphoniopropenide intermediate. After stepwise cycloaddition and proton transfer, the phosphine catalyst can be regenerated by C?P bond cleavage. Alternatively, the zwitterionic phosphoniopropenide intermediate could also be protonated by a Brønsted acid to generate a phosphonium intermediate, which can be used to construct new C?C bonds by electrophilic addition. In this review, we have summarized details of mechanistic studies of phosphine‐catalyzed allene coupling reactions that follow these two reaction modes. In addition to detailing the reaction pathway, the regioselectivity and diastereoselectivity of the phosphine‐catalyzed allene coupling reaction are also discussed in this review.     

Computational Insight into Nickel‐Catalyzed Carbon–Carbon versus Carbon–Boron Coupling Reactions of Primary,Secondary, and Tertiary Alkyl Bromides

The nickel‐catalyzed alkyl–alkyl cross‐coupling (C?C bond formation) and borylation (C?B bond formation) of unactivated alkyl halides reported in the literature show completely opposite reactivity orders in the reactions of primary, secondary, and tertiary alkyl bromides. The proposed Ni^I/Ni^III catalytic cycles for these two types of bond‐formation reactions were studied computationally by means of DFT calculations at the B3LYP level. These calculations indicate that the rate‐determining step for alkyl–alkyl cross‐coupling is the reductive elimination step, whereas for borylation the rate is determined mainly by the atom‐transfer step. In borylation reactions, the boryl ligand involved has an empty p orbital, which strongly facilitates the reductive elimination step. The inability of unactivated tertiary alkyl halides to undergo alkyl–alkyl cross‐coupling is mainly due to the moderately high reductive elimination barrier.     

Experimental and Theoretical Study of Tunable 1,3‐Lithium Shift of Propargylic/Allenylic Species,Transmetallation, and Pd‐Catalyzed Cross‐Coupling Reactions

The highly selective tuning of the isomerization from 1‐arylalka‐1,2‐dien‐1‐yllithium to 1‐arylalka‐1,2‐dien‐3‐yllithium has been realized in the deprotonation of 1‐arylalk‐1‐yne (conditions A and B) and carbolithiation of 1‐arylbut‐3‐en‐1‐yne with alkyllithium (conditions C and D). Subsequent transmetallation and Pd‐catalyzed Negishi coupling reactions afforded 1,1‐diaryl or 1,3‐diaryl allenes with high selectivity. Deuterium‐labeling cross experiments indicated that an intermolecular lithiation process occurred in both 1,3‐lithium shift conditions (conditions B and D). 1‐Arylalka‐1,2‐diene was confirmed experimentally to be the intermediate. A computational study at the B3LYP level for the isomerization indicated that the acidity of H at the 3‐position is higher than that of the H at the 1‐position of 1‐phenyl‐1,2‐butadiene. Under conditions B, iPr₂NH acts as a proton carrier to finish the 1,3‐lithium shift. The overall activation barrier for the rate‐determining step in the solvated models is ≈21.0 kcal mol^?1, indicating that the isomerization is reasonable at room temperature. For the isomerization under conditions D, DFT calculations indicated that the addition of TMEDA (tetramethylethylenediamine) and HMPA (hexamethylphosphoramide) changes the global minimum of the system; among the possible mechanisms (P1–P5) considered, the mechanism catalyzed by dilithiated species (P5) is the most probable one. The overall activation barriers for isomerization in THF and TMEDA solvated models are 22.6 and 19.7 kcal mol^?1, respectively, proving that the isomerization may proceed at RT in THF or at ?78 °C with TMEDA, due to the fact that the solvation of the additives may increase the concentration of 1‐phenyl‐1,2‐butadienyllithium monomer by a deaggregation effect.     

DFT Study on the Recovery of Hoveyda–Grubbs‐Type Catalyst Precursors in Enyne and Diene Ring‐Closing Metathesis

DFT (B3LYP‐D) calculations have been used to better understand the origin of the recovered Hoveyda–Grubbs derivative catalysts after ring‐closing diene or enyne metathesis reactions. For that, we have considered the activation process of five different Hoveyda–Grubbs precursors in the reaction with models of usual diene and enyne reactants as well as the potential precursor regeneration through the release/return mechanism. The results show that, regardless of the nature of the initial precursor, the activation process needs to overcome relatively high energy barriers, which is in agreement with a relatively slow process. The precursor regeneration process is in all cases exergonic and it presents low energy barriers, particularly when compared to those of the activation process. This indicates that the precursor regeneration should always be feasible, unlike the moderate recoveries sometimes observed experimentally, which suggests that other competitive processes that hinder recovery should take place. Indeed, calculations presented in this work show that the reactions between the more abundant olefinic products and the active carbenes usually require lower energy barriers than those that regenerate the initial precatalyst, which could prevent precursor regeneration. On the other hand, varying the precursor concentration with time obtained from the computed energy barriers shows that, under the reaction conditions, the precursor activation is incomplete, thereby suggesting that the origin of the recovered catalyst probably arises from incomplete precursor activation.     

Base‐Free Non‐Noble‐Metal‐Catalyzed Hydrogen Generation from Formic Acid: Scope and Mechanistic Insights

The iron‐catalyzed dehydrogenation of formic acid has been studied both experimentally and mechanistically. The most active catalysts were generated in situ from cationic Fe^II/Fe^III precursors and tris[2‐(diphenylphosphino)ethyl]phosphine ( 1 , PP₃). In contrast to most known noble‐metal catalysts used for this transformation, no additional base was necessary. The activity of the iron catalyst depended highly on the solvent used, the presence of halide ions, the water content, and the ligand‐to‐metal ratio. The optimal catalytic performance was achieved by using [FeH(PP₃)]BF₄/PP₃ in propylene carbonate in the presence of traces of water. With the exception of fluoride, the presence of halide ions in solution inhibited the catalytic activity. IR, Raman, UV/Vis, and EXAFS/XANES analyses gave detailed insights into the mechanism of hydrogen generation from formic acid at low temperature, supported by DFT calculations. In situ transmission FTIR measurements revealed the formation of an active iron formate species by the band observed at 1543 cm^?1, which could be correlated with the evolution of gas. This active species was deactivated in the presence of chloride ions due to the formation of a chloro species (UV/Vis, Raman, IR, and XAS). In addition, XAS measurements demonstrated the importance of the solvent for the coordination of the PP₃ ligand.     

Mechanistic Investigation of the Ruthenium–N‐Heterocyclic‐Carbene‐Catalyzed Amidation of Amines with Alcohols

The mechanism of the ruthenium–N‐heterocyclic‐carbene‐catalyzed formation of amides from alcohols and amines was investigated by experimental techniques (Hammett studies, kinetic isotope effects) and by a computational study with dispersion‐corrected density functional theory (DFT/M06). The Hammett study indicated that a small positive charge builds‐up at the benzylic position in the transition state of the turnover‐limiting step. The kinetic isotope effect was determined to be 2.29(±0.15), which suggests that the breakage of the C? H bond is not the rate‐limiting step, but that it is one of several slow steps in the catalytic cycle. Rapid scrambling of hydrogen and deuterium at the α position of the alcohol was observed with deuterium‐labeled substrates, which implies that the catalytically active species is a ruthenium dihydride. The experimental results were supported by the characterization of a plausible catalytic cycle by using DFT/M06. Both cis‐dihydride and trans‐dihydride intermediates were considered, but when the theoretical turnover frequencies (TOFs) were derived directly from the calculated DFT/M06 energies, we found that only the trans‐dihydride pathway was in agreement with the experimentally determined TOFs.     

The Roles of Counterion and Water in a Stereoselective Cysteine‐Catalyzed Rauhut–Currier Reaction: A Challenge for Computational Chemistry

The stereoselective Rauhut–Currier (RC) reaction catalyzed by a cysteine derivative has been explored computationally with density functional theory (M06‐2X). Both methanethiol and a chiral cysteine derivative were studied as nucleophiles. The complete reaction pathway involves rate‐determining elimination of the thiol catalyst from the Michael addition product. The stereoselective Rauhut–Currier reaction, catalyzed by a cysteine derivative as a nucleophile, has also been studied in detail. This reaction was experimentally found to be extremely sensitive to the reaction conditions, such as the number of water equivalents and the effect of potassium counterion. The E1cB process for catalyst elimination has been explored computationally for the eight possible stereoisomers. The effect of explicit water solvation and the presence of counterion (either K⁺ or Na⁺) has been studied for the lowest energy enantiomer pair (1S, 2R, 3S)/(1R, 2S, 3R).     

Mechanistic Study on Oxorhenium‐Catalyzed Deoxydehydration and Allylic Alcohol Isomerization

The reaction mechanism of 1,2×n‐deoxydehydration (DODH; n=1, 2, 3 …) reactions with 1‐butanol as a reductant in the presence of methyltrioxorhenium(VII) catalyst has been investigated by DFT. The reduced rhenium compound, methyloxodihydroxyrhenium(V), serves as the catalytically relevant species in both allylic alcohol isomerization and subsequent DODH processes. Compared with three‐step pathway A, involving [1,3]‐transposition of allylic alcohols, direct two‐step pathway B is an alternative option with lower activation barriers. The rate‐limiting step of the DODH reaction is the first hydrogen transfer in methyltrioxorhenium(VII) reduction. Moreover, the increase in the distance between two hydroxyl groups in direct 1,2×n‐DODH reactions for C4 and C6 diols results in a higher barrier height.