A Highly Efficient Near‐Infrared‐Emissive Copolymer with a N=N Double‐Bond π‐Conjugated System Based on a Fused Azobenzene–Boron Complex

Fused azobenzene–boron complexes (BAzs) show highly efficient near‐infrared (NIR) emission from the nitrogen–nitrogen double bond (N=N) containing π‐conjugated copolymer. Optical measurements showed that BAz worked as a strong electron acceptor because of the intrinsic electron deficiency of the N=N double bond and the boron–nitrogen (B?N) coordination which dramatically lowered the energy of the lowest unoccupied molecular orbital (LUMO) of the azobenzene ligand. The simple donor–acceptor (D–A) type copolymer of bithiophene (BT) and BAz exhibited intense photoluminescence (PL) in the NIR region both in the dilute solution (λ_PL=751 nm, Φ_PL=0.25) and in the film (λ_PL=821 nm, Φ_PL=0.038). The BAz monomer showed slight PL in the dilute solution, and aggregation‐induced emission (AIE) was detected. We proposed that N=N double bonds should be attractive and functional building blocks for designing π‐conjugated materials.     

Highly near‐infrared emissive boron di(iso)indomethene‐based polymer: Drastic change from deep‐red to near‐infrared emission via quantitative polymer reaction

It is challenging to realize the near‐infrared (NIR) emission with large brightness and sharp spectra from the conjugated polymers. In this study, we demonstrate the strategy for receiving strong and pure NIR emission from polymeric materials using organoboron complexes and the modification after polymerization. A series of NIR emissive conjugated polymers with boron di(iso)indomethenes (BODINs) and fluorene or bithiophene were synthesized by Suzuki–Miyaura coupling reaction. The obtained polymers exhibited high emissions in the range from deep‐red to NIR region (quantum yields: ?_PL = 0.40–0.79, full width at half maximum height: Δλ_1/2 = 660–940 cm^?1, emission maxima: λ_PL = 686–714 nm). Next, the demethylation of the BODIN‐based polymer with o‐methoxyphenyl groups was carried out. The transformation of the polymer structure quantitatively proceeded via efficient intramolecular crosslinking through the intermediary of the boron atom. Finally, the resulting polymer showed both drastically larger red‐shifted and sharper photoluminescence spectrum than that of the parent polymer with deep‐red emission (?_PL = 0.37, Δλ_1/2 = 460 cm^?1, λ_PL = 758 nm). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Boron‐Ketoiminate‐Based Polymers: Fine‐Tuning of the Emission Color and Expression of Strong Emission Both in the Solution and Film States

In this research, the synthesis of boron‐ketoiminate‐containing polymers is reported with large molecular weights ( = 20 000) and their optical properties are examined by UV–vis absorption and photoluminescence spectrometries. It is shown that the polymers exhibit strong emission both in the solution and solid states (Φ _PL,THF = 0.46–0.80, Φ _PL,film = 0.13–0.38). These optical properties can be explained by a donor–acceptor interaction between the boron ketoiminate and the electron‐donating comonomer such as fluorene or bithiophene. Furthermore, in the solid states, their emission colors can be successfully tuned from blue to orange by the substituents on the nitrogen atom with the difference of the steric hindrance (λ _PL,THF = 464–546 nm, λ _PL,film = 486–604 nm).

     

Color‐Tunable Solid‐State Fluorescence Emission from Carbazole‐Based BODIPYs

Several carbazole‐based boron dipyrromethene (BODIPY) dyes were synthesized by organometallic approaches. Thiazole, benzothiazole, imidazole, benzimidazole, triazole, and indolone substituents were introduced at the 1‐position of the carbazole moiety, and boron complexation of each dipyrrin generated the corresponding compounds 1 , 2 a , and 3 – 6 . The properties of these products were investigated by UV/Vis and fluorescence spectroscopy, cyclic voltammetry, X‐ray crystallography, and DFT calculations. These compounds exhibited large Stokes shifts, and compounds 1 , 2 a , and 3 – 5 fluoresced both in solution and in the solid state. Complex 2 a showed the highest fluorescence quantum yield (Φ_F) in the solid state, therefore boron complexes of the carbazole–benzothiazole hybrids 2 b – f , which had several different substituents, were prepared and the effects of the substituents on the photophysical properties of the compounds were examined. The fluorescence properties showed good correlation with the results of crystal‐packing analyses, and the dyes exhibited color‐tunable solid‐state fluorescence.     

The Control of Conjugation Lengths and Steric Hindrance to Modulate Aggregation‐Induced Emission with High Electroluminescence Properties and Interesting Optical Properties

A series of novel AIE‐active (aggregation‐induced emission) molecules, named SAF‐2‐TriPE, SAF‐3‐TriPE, and SAF‐4‐TriPE, were designed and synthesized through facile reaction procedures. We found that incorporation of the spiro‐acridine‐fluorene (SAF) group, which is famous for its excellent hole‐transporting ability and rigid structure, at different substitution positions on the phenyl ring affected the conjugation lengths of these compounds. Consequently, we have obtained molecules with different emission colors and properties without sacrificing good EL (electroluminescence) characteristics. Accordingly, a device that was based on compound SAF‐2‐TriPE displayed superior EL characteristics: it emitted green light with η_{c, max}=10.5 cd A^?1 and η_{ext, max}=4.22 %, whereas a device that was based on compound SAF‐3‐TriPE emitted blue‐green light with η_{c, max}=3.9 cd A^?1 and η_{ext, max}= 1.71 %. These compounds also displayed different AIE performances: when the fraction of water in the THF solutions of these compounds was increased, we observed a significant improvement in the Φ_F of compounds SAF‐2‐TriPE and SAF‐3‐TriPE; in contrast, compound SAF‐4‐TriPE showed an abnormal phenomenon, in that it emitted a strong fluorescence in both pure THF solution and in the aggregated state without a significant change in Φ_F. Overall, this systematic study confirmed a relationship between the regioisomerism of the luminophore structure and its AIE activity and the resulting electroluminescent performance in non‐doped devices.     

Recent Advances in the Z/E Isomers of Tetraphenylethene Derivatives: Stereoselective Synthesis,AIE Mechanism,Photophysical Properties,and Application as Chemical Probes

Focused research on the Z/E isomers of tetraphenylethene (TPE) derivatives is scarce in comparison with the thousands of luminogens with AIE properties (AIEgens) that have been synthesized based on the TPE moiety. The similar chemical and physical properties of the Z/E isomers make them difficult to separate by using conventional chromatographic techniques. However, they can be isolated by introducing polar groups and the pure isomers exhibit very different photophysical properties, mechanochromism, and host–guest coordination, as well as assisting in deciphering the AIE mechanism. In this Minireview, we present an overview of the disagreement regarding the AIE mechanism between the restriction of intramolecular vibration and photoinduced Z/E isomerization. Then, we discuss the development of (Z)‐/(E)‐TPE derivatives, their use in host–guest detection, and their mechanoluminescence properties, with a focus on their photophysical characteristics. Finally, we explore the stereoselective synthesis of pure (Z)‐/(E)‐TPE derivatives.     

Efficient NIR‐Light Emission from Solid‐State Complexes of Boron Difluoride with 2′‐Hydroxychalcone Derivatives

This article describes a series of nine complexes of boron difluoride with 2′‐hydroxychacone derivatives. These dyes were synthesized very simply and exhibited intense NIR emission in the solid state. Complexation with boron was shown to impart very strong donor–acceptor character into the excited state of these dyes, which further shifted their emission towards the NIR region (up to 855 nm for dye 5 b , which contained the strongly donating triphenylamine group). Strikingly, these optical features were obtained for crystalline solids, which are characterized by high molecular order and tight packing, two features that are conventionally believed to be detrimental to luminescence in organic crystals. Remarkably, the emission of light from the π‐stacked molecules did not occur at the expense of the emission quantum yield. Indeed, in the case of pyrene‐containing dye 4 , for example, a fluorescence quantum yield of about 15 % with a fluorescence emission maximum at 755 nm were obtained in the solid state. Moreover, dye 3 a and acetonaphthone‐based compounds 1 b , 2 b , and 3 b showed no evidence of degradation as solutions in CH₂Cl₂ that contained EtOH. In particular, solutions of brightly fluorescent compound 3 a (brightness: ε×Φ_f=45 000 M ^?1 cm^?1) could be stored for long periods without any detectable changes in its optical properties. All together, these new dyes possess a set of very interesting properties that make them promising solid‐state NIR fluorophores for applications in materials science.     

Revealing the Charge‐Transfer Interactions in Self‐Assembled Organic Cocrystals: Two‐Dimensional Photonic Applications

A new crystal of a charge‐transfer (CT) complex was prepared through supramolecular assembly and it has unique two‐dimensional (2D) morphology. The CT nature of the ground and excited states of this new Bpe‐TCNB cocrystal (BTC) were confirmed by electron spin resonance measurements, spectroscopic studies, and theoretical calculations, thus providing a comprehensive understanding of the CT interactions in organic donor–acceptor systems. And the lowest CT₁ excitons are responsible for the efficient photoluminescence (Φ_PL=19 %), which can actively propagate in individual 2D BTCs without anisotropy, thus implying that the optical waveguide property of the crystal is not related to the molecular stacking structure. This unique 2D CT cocrystal exhibits potential for use in functional photonic devices in the next‐generation optoelectronic communications.     

Synthesis and characterization of fluorene‐based oligomers and polymers incorporating N‐arylphenothiazine‐S,S‐dioxide units

A series of 3,7‐bis(9,9‐di‐n‐hexylfluoren‐2‐yl)‐N‐arylphenothiazine‐S,S‐dioxide trimers and (9,9‐di‐n‐octylfluorene‐2,7‐diyl‐co‐N‐arylphenothiazine‐S,S‐dioxide) co‐polymers, with varying ratios of phenothiazine‐S,S‐dioxide units, have been prepared in good yields by palladium‐catalyzed cross‐coupling reactions. The materials are deep blue emitters and show no solvatochromism or evidence for an intramolecular charge‐transfer state. The photoluminescence quantum yields of the trimers are ?_PL 15–30% in solution and 14–25% in films. The polymers demonstrated very high values in solution (?_PL 74–84%) and ?_PL values in films of 28–47%. The estimated HOMO energy levels are between ?5.64 and ?5.62 eV for the polymers with 15% incorporation of the phenothiazine‐S,S‐dioxide units. An analogous N‐arylphenothiazine co‐polymer shows significantly red shifted absorption and emission. Solution electrochemical data and density functional theory calculations are also presented. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and Fluorescence Properties of Pyrimidine‐Based Diboron Complexes with Donor–π–Acceptor Structures

Pyrimidine‐based diboron complexes bearing β‐iminoenolate ligands and phenyl groups as bulky substituents on the boron atoms were synthesized as novel fluorescent dyes, and their fluorescence properties were investigated in solution and in the solid state. The diboron complexes with donor–π–acceptor structures showed positive solvatochromism in the fluorescence spectra. The cyano derivative exhibited the most dramatic redshift of the fluorescence maximum F_max with increasing solvent polarity (from 551 nm in n‐hexane to 710 nm in acetonitrile). The diboron complexes showed solid‐state fluorescence in the range of 578–706 nm with fluorescence quantum yields of 0.06–0.28. Additionally, the trifluoromethyl derivative exhibited solvent‐inclusion solid‐state fluorescence. The trifluoromethyl derivative formed toluene‐inclusion and ethyl acetate‐inclusion crystals. The toluene‐inclusion crystal (F_max=668 nm, Φ_f=0.16) showed a blueshifted F_max and higher Φ_f value compared to the original trifluoromethyl derivative (F_max=694 nm, Φ_f=0.08) in the solid state. On the other hand, the F_max (709 nm) and Φ_f (0.04) values of the ethyl acetate‐inclusion crystal were redshifted and lower, respectively.     

Controlling Energy Gaps of π-Conjugated Polymers by Multi-Fluorinated Boron-Fused Azobenzene Acceptors for Highly Efficient Near-Infrared Emission

We demonstrate that multi-fluorinated boron-fused azobenzene (BAz) complexes can work as a strong electron acceptor in electron donor-acceptor (D-A) type π-conjugated polymers. Position-dependent substitution effects were revealed, and the energy level of the lowest unoccupied molecular orbital (LUMO) was critically decreased by fluorination. As a result, the obtained polymers showed near-infrared (NIR) emission (λ_PL=758–847 nm) with high absolute photoluminescence quantum yield (Φ_PL=7–23%) originating from low-lying LUMO energy levels of the BAz moieties (−3.94 to −4.25 eV). Owing to inherent solid-state emissive properties of the BAz units, deeper NIR emission (λ_PL=852980 nm) was detected in film state. Clear solvent effects prove that the NIR emission is from a charge transfer state originating from a strong D-A interaction. The effects of fluorination on the frontier orbitals are well understandable and predictable by theoretical calculation with density functional theory. This study demonstrates the effectiveness of fluorination to the BAz units for producing a strong electron-accepting unit through fine-tuning of energy gaps, which can be the promising strategy for designing NIR absorptive and emissive materials.     

Boron Complexes of Glyoxal‐Derived Ugi Adducts as a New Class of Aggregation‐Induced Emission Photoluminescent Materials

A series of O,O‐chelated boron complexes was prepared through a four‐component Ugi reaction followed by complexation of the resulting 1,3‐dicarbonyl compounds with boron trifluoride diethyl etherate. The optical properties of these novel luminophores were investigated by UV/Vis spectroscopy and spectrofluorometry, revealing pronounced aggregation‐induced emission (AIE) features.     

Synthetic Control of the Excited‐State Dynamics and Circularly Polarized Luminescence of Fluorescent “Push–Pull” Tetrathia[9]helicenes

A series of fluorescent “push‐pull” tetrathia[9]helicenes based on quinoxaline (acceptor) fused with tetrathia[9]helicene (donor) derivatives was synthesized for control of the excited‐state dynamics and circularly polarized luminescence (CPL) properties. In this work, introduction of a quinoxaline onto the tetrathia[9]helicene skeleton induced the “push–pull” character, which was enhanced by further introduction of an electron‐releasing Me₂N group or an electron‐withdrawing NC group onto the quinoxaline unit (denoted as Me₂N‐QTTH and NC‐QTTH, respectively). These trends were successfully discussed in terms of by electrochemical measurements and density functional theory (DFT) calculations. As a consequence, significant enhancements in the fluorescence quantum yields (Φ_FL) were achieved. In particular, the maximum Φ_FL of Me₂N‐QTTH was 0.43 in benzene (NC‐QTTH: Φ_FL=0.30), which is more than 20 times larger than that of a pristine tetrathia[9]helicene (denoted as TTH; Φ_FL=0.02). These enhancements were also explained by kinetic discussion of the excited‐state dynamics such as fluorescence and intersystem crossing (ISC) pathways. Such significant enhancements of the Φ_FL values thus enabled us to show the excellent CPL properties. The value of anisotropy factor g_CPL (normalized difference in emission of right‐handed and left‐handed circularly polarized light) was estimated to be 3.0×10^?3 for NC‐QTTH.     

Metal Complexes of a Boron‐Dipyrromethene (BODIPY)‐Tagged N‐Heterocyclic Carbene (NHC) as Luminescent Carbon Monoxide Chemodosimeters

Several metal complexes with a boron dipyrromethene (BODIPY)‐functionalized N‐heterocyclic carbene (NHC) ligand 4 were synthesized. The fluorescence in [( 4 )(SIMes)RuCl₂(ind)] complex is quenched (Φ=0.003), it is weak in [( 4 )PdI₂(Clpy)] (Φ=0.033), and strong in [( 4 )AuI] (Φ=0.70). The BODIPY‐tagged complexes can experience pronounced changes in the brightness of the fluorophore upon ligand‐exchange and ligand‐dissociation reactions. Complexes [( 4 )MX(1,5‐cyclooctadiene)] (M=Rh, Ir; X=Cl, I; Φ=0.008–0.016) are converted into strongly fluorescent complexes [( 4 )MX(CO)₂] (Φ=0.53–0.70) upon reaction with carbon monoxide. The unquenching of the Rh and Ir complexes appears to be a consequence of the decreased electron density at Rh or Ir in the carbonyl complexes. In contrast, the substitution of an iodo ligand in [( 4 )AuI] by an electron‐rich thiolate decreases the brightness of the BODIPY fluorophore, rendering the BODIPY as a highly sensitive probe for changes in the coordination sphere of the transition metal.     

D–π–A Triarylboron Compounds with Tunable Push–Pull Character Achieved by Modification of Both the Donor and Acceptor Moieties

The push–pull character of a series of donor–bithienyl–acceptor compounds has been tuned by adopting triphenylamine or 1,1,7,7‐tetramethyljulolidine as a donor and B(2,6‐Me₂‐4‐RC₆H₂)₂ (R=Me, C₆F₅ or 3,5‐(CF₃)₂C₆H₃) or B[2,4,6‐(CF₃)₃C₆H₂]₂ as an acceptor. Ir‐catalyzed C?H borylation was utilized in the derivatization of the boryl acceptors and the tetramethyljulolidine donor. The donor and acceptor strengths were evaluated by electrochemical and photophysical measurements. In solution, the compound with the strongest acceptor, B[2,4,6‐(CF₃)₃C₆H₂]₂ ((FMes)₂B), has strongly quenched emission, while all other compounds show efficient green to red (Φ_F=0.80–1.00) or near‐IR (NIR; Φ_F=0.27–0.48) emission, depending on solvent. Notably, this study presents the first examples of efficient NIR emission from three‐coordinate boron compounds. Efficient solid‐state red emission was observed for some derivatives, and interesting aggregation‐induced emission of the (FMes)₂B‐containing compound was studied. Moreover, each compound showed a strong and clearly visible response to fluoride addition, with either a large emission‐color change or turn‐on fluorescence.     

Hexaphenylbenzene‐Based, π‐Conjugated Snowflake‐Shaped Luminophores: Tunable Aggregation‐Induced Emission Effect and Piezofluorochromism

In this work, two rigid, multiple tetraphenylethene (TPE)‐substituted, π‐conjugated, snowflake‐shaped luminophores BT and BPT were facilely synthesized by using a 6‐fold Suzuki coupling reaction. These molecules are constructed based on the nonplanar structure of propeller‐shaped hexaphenylbenzene (HPB) or benzene as core groups and TPE as end groups. As a result, they reserve the intrinsic aggregation‐induced emission (AIE) property of the TPE moiety. Meanwhile, both fluorescence quantum yield and piezochromic behavior in the solid state can be tuned or switched by inserting the phenyl bridges through changing the twisting conformation. The more extended structure BPT showed a much stronger AIE effect and higher Φ_F,f in the solid state in comparison with that of BT. Furthermore, an excellent optical waveguide application of these molecules was achieved. However, the revisable piezofluorochromic behavior has only appeared when BT was ground using a pestle and treated with solvent.     

An Optically and Thermally Switchable Electronic Structure Based on an Anthracene–BODIPY Conjugate

An optically and thermally responsive boron dipyrromethene (BODIPY) dye, namely, meso‐2‐(9,10‐dihydro‐9,10‐ethanoanthracene‐11,12‐dione) (DK)‐linked, bicyclo[2.2.2]octadiene (BCOD)‐fused BODIPY ( BCOD‐DK ), was synthesized. The weakly luminous structure of BCOD‐DK can be changed quantitatively to that of the strongly fluorescent BODIPY BCOD‐Ant by optical excitation at the DK unit, which induces double decarbonylation of the DK unit to give an anthracene unit. The solvent effect on the fluorescence properties of BCOD‐DK suggests that the dramatic change in fluorescence intensity is controlled by intramolecular electron transfer from the BODIPY moiety to the meso‐DK substituent. BCOD‐DK is converted to meso‐ DK benzene‐fused BODIPY ( Benzo‐DK ) by heating at 220 °C with 64–70 nm redshift of absorption and fluorescence peaks without changing the fluorescence quantum yield of Φ_F=0.08 in dichloromethane. Benzo‐DK can be converted to strongly fluorescent meso ‐ anthracene benzene‐fused BODIPY Benzo‐Ant by optical excitation. Thus, BCOD‐DK can show four different optical performances simply by irradiation and heating, and hence may be applicable for optical data storage and security data encryption.     

A Strategy for Dramatically Enhancing the Selectivity of Molecules Showing Aggregation‐Induced Emission towards Biomacromolecules with the Aid of Graphene Oxide

By intelligently utilizing the different interacting strengths between different moieties according to the displacement method, general biosensors with aggregation‐induced emission (AIE) characteristics for biomacromolecules without selectivity were converted to excellent, highly selective probes for one specific biomacromolecule with the aid of graphene oxide (GO) in an aqueous medium. Importantly, thanks to the different interactions between the AIE molecule and biomacromolecules, just by simply changing the AIE molecule the sensing system could detect different types of biomacromolecules, thereby providing a new approach to the development of AIE‐based sensors with high selectivity and sensitivity. More specifically, the complex of A₂HPS?HCl—a derivative of hexaphenylsilone (HPS) functionalized by two amino (A₂) groups (N(CH₂CH₃)₃)—and GO only gives an “off–on” response to DNA, with a detection limit of 2.3 μg mL^?1 toward DNA‐CT (calf thymus); interestingly, the complex of TPE‐N₂C₄ (1,2‐bis{4‐[4‐(N,N,N‐triethylammonium)butoxy]phenyl}‐1,2‐diphenylethene dibromide) and GO could only detect the presence of bovine serum albumin (BSA), whereas other biomacromolecules, including DNA, RNA, and even other proteins have very little influence.     

A Vicinal Electrophilic Diborylation Reaction Furnishes Doubly Boron‐Doped Polycyclic Aromatic Hydrocarbons

Ten examples of unsymmetrically benzannulated, boron‐doped polycyclic aromatic hydrocarbons (B‐PAHs) were prepared by a one‐pot protocol using 4,5‐dichloro‐1,2‐bis(trimethylsilyl)benzene ( 1 ), BBr₃, and selected PAHs—among them anthracene, benzo[a ]pyrene, biphenylene, and fluoranthene. After mesitylation at the boron centers, the resulting air‐ and water‐stable products were investigated by ¹H/¹¹B{¹H}/¹³C{¹H} NMR spectroscopy, X‐ray crystallography, cyclic voltammetry, and UV/Vis absorption/emission spectroscopy. The experiments were augmented by DFT calculations. Most of the B‐PAHs are brightly luminescent (Φ _PL up to 90 %) and undergo reversible reduction at moderate half‐wave potentials. The two chloro substituents of 1 are not only mandatory for accomplishing efficient diborylation, but can subsequently be used for Stille‐type coupling reactions to introduce 2‐thienyl moieties. Alternatively, Cl/H exchange is achievable with HSiEt₃ in a quantitative, Pd‐catalyzed transformation.     

A Vicinal Electrophilic Diborylation Reaction Furnishes Doubly Boron-Doped Polycyclic Aromatic Hydrocarbons

Ten examples of unsymmetrically benzannulated, boron-doped polycyclic aromatic hydrocarbons (B-PAHs) were prepared by a one-pot protocol using 4,5-dichloro-1,2-bis(trimethylsilyl)benzene ( 1 ), BBr₃, and selected PAHs—among them anthracene, benzo[a]pyrene, biphenylene, and fluoranthene. After mesitylation at the boron centers, the resulting air- and water-stable products were investigated by ¹H/¹¹B{¹H}/¹³C{¹H} NMR spectroscopy, X-ray crystallography, cyclic voltammetry, and UV/Vis absorption/emission spectroscopy. The experiments were augmented by DFT calculations. Most of the B-PAHs are brightly luminescent (Φ_PL up to 90 %) and undergo reversible reduction at moderate half-wave potentials. The two chloro substituents of 1 are not only mandatory for accomplishing efficient diborylation, but can subsequently be used for Stille-type coupling reactions to introduce 2-thienyl moieties. Alternatively, Cl/H exchange is achievable with HSiEt₃ in a quantitative, Pd-catalyzed transformation.