Synthesis and Self‐Assembly of NCN‐Pincer Pd‐Complex‐Bound Norvalines

The NCN‐pincer Pd‐complex‐bound norvalines Boc‐D /L ‐[PdCl(dpb)]Nva‐OMe ( 1 ) were synthesized in multigram quantities. The molecular structure and absolute configuration of 1 were unequivocally determined by single‐crystal X‐ray structure analysis. The robustness of 1 under acidic/basic conditions provides a wide range of N‐/C‐terminus convertibility based on the related synthetic transformations. Installation of a variety of functional groups into the N‐/C‐terminus of 1 was readily carried out through N‐Boc‐ or C‐methyl ester deprotection and subsequent condensations with carboxylic acids, R¹COOH, or amines, R²NH₂, to give the corresponding N‐/C‐functionalized norvalines R¹‐D /L ‐[PdCl(dpb)]Nva‐R² 2 – 9 . The dipeptide bearing two Pd units 10 was successfully synthesized through the condensation of C‐free 1 with N‐free 1 . The robustness of these Pd‐bound norvalines was adequately demonstrated by the preservation of the optical purity and Pd unit during the synthetic transformations. The lipophilic Pd‐bound norvalines L ‐ 2 , Boc‐L ‐[PdCl(dpb)]Nva‐NH‐n‐C₁₁H₂₃, and L ‐ 4 , n‐C₄H₉CO‐L ‐[PdCl(dpb)]Nva‐NH‐n‐C₁₁H₂₃, self‐assembled in aromatic solvents to afford supramolecular gels. The assembled structures in a thermodynamically stable single crystal of L ‐ 2 and kinetically stable supramolecular aggregates of L ‐ 2 were precisely elucidated by cryo‐TEM, WAX, SAXS, UV/Vis, IR analyses, and single‐crystal X‐ray crystallography. An antiparallel β‐sheet‐type aggregate consisting of an infinite one‐dimensional hydrogen‐bonding network of amide groups and π‐stacking of PdCl(dpb) moieties was observed in the supramolecular gel fiber of L ‐ 2 , even though discrete dimers are assembled through hydrogen bonding in the thermodynamically stable single crystal of L ‐ 2 . The disparate DSC profiles of the single crystal and xerogel of L ‐ 2 indicate different thermodynamics of the molecular assembly process.     

Diethyl 3,8‐di­methyl‐4,7‐di­aza­deca‐2,8‐dienedioate

The title compound, C₁₄H₂₄N₂O₄, consists of two symmetric moieties related through a twofold axis. The whole mol­ecule has a cis conformation. Both the ionic enol form and the non‐ionic keto form make comparable contributions to the structure. In the crystal structure, infinite supramolecular chains are formed through N—H⋯O hydrogen bonds.     

Preparation of an Organometallic Molecular Square by Self‐Assembly of Phosphorus‐Containing Building Blocks

Molecular squares are among the most common supramolecular architectures, but phospha‐organometallic complexes have not been used as building blocks for this type of structure. Herein we describe the formation of the molecular square [Au{Co(P₂C₂tBu₂)₂}]₄ ( 1 ) by the self‐assembly of anionic 1,3‐diphosphacyclobutadiene cobalt complexes and gold(I) cations. The X‐ray crystallographic determination of the molecular structure of 1 is complemented by solid‐state ³¹P and ¹³C NMR investigations. High‐level DFT calculations confirm the assignment of the ³¹P and ¹³C NMR resonances.     

Hydrogen‐bonded supramolecular networks of N,N′‐bis(4‐pyridylmethyl)oxalamide and 4,4′‐{[oxalylbis(azanediyl)]dimethylene}dipyridinium dinitrate

The molecule of N,N′‐bis(4‐pyridylmethyl)oxalamide, C₁₄H₁₄N₄O₂, (I) or 4py‐ox, has an inversion center in the middle of the oxalamide group. Adjacent molecules are then linked through intermolecular N—H...N and C—H...O hydrogen bonds, forming an extended supramolecular network. 4,4′‐{[Oxalylbis(azanediyl)]dimethylene}dipyridinium dinitrate, C₁₄H₁₆N₄O₂²⁺·2NO₃⁻, (II), contains a diprotonated 4py‐ox cation and two nitrate counter‐anions. Each nitrate ion is hydrogen bonded to four 4py‐ox cations via intermolecular N—H...O and C—H...O interactions. Adjacent 4py‐ox cations are linked through weak C—H...O hydrogen bonding between an α‐pyridinium C atom and an oxalamide O atom, forming a two‐dimensional extended supramolecular network.     

Self‐assembly of a one‐dimensional iron(II) coordination polymer with p‐phenylenebis(picolinaldimine)

catena‐Poly[[[dichloridoiron(II)]‐μ‐N,N′‐bis(2‐pyridylmethylene)benzene‐1,4‐diamine] methanol disolvate], [FeCl₂(C₁₈H₁₄N₄)]·2CH₃OH, forms a one‐dimensional coordination polymer. The polymeric chains run parallel to the c axis. O—H...Cl—Fe and C—H...O hydrogen‐bonding interactions with methanol solvent molecules stabilize the open supramolecular framework. Each Fe^II atom adopts an octahedral geometry coordinated by four N atoms from two N,N′‐bis(2‐pyridylmethylene)benzene‐1,4‐diamine ligands and completed by two cis Cl atoms. The compound has C₂ (and C_i) molecular symmetry, which is coincident with the crystallographic twofold symmetry at (0, y, ). The one‐dimensional structure is propagated via the crystallographic inversion center located at the benzene ring centroid (0, , 0).     

Self‐assembly properties of Salamo‐type trinuclear Cu(II) and Co(II) complexes based on the regulation of H+/OHˉ

A novel naphthalenediol‐based bis(salamo)‐type tetraoxime compound (H₄L) was designed and synthesized. Two new supramolecular complexes, [Cu₃(L)(μ‐OAc)₂] and [Co₃(L)(μ‐OAc)₂(MeOH)₂]·4CHCl₃ were synthesized by the reaction of H₄L with Cu(II) acetate dihydrate and Co(II) acetate dihydrate, respectively, and were characterized by elemental analyses and X‐ray crystallography. In the Cu(II) complex, Cu1 and Cu2 atoms located in the N₂O₂ sites, and are both penta‐coordinated, and Cu3 atom is also penta‐coordinated by five oxygen atoms. All the three Cu(II) atoms have geometries of slightly distorted tetragonal pyramid. In the Co(II) complex, Co1 and Co3 atoms located in the N₂O₂ sites, and are both penta‐coordinated with geometries of slightly distorted triangular bipyramid and distorted tetragonal pyramid, respectively, while Co2 atom is hexa‐coordinated by six oxygen atoms with a geometry of slightly distorted octahedron. These self‐assembling complexes form different dimensional supramolecular structures through inter‐ and intra‐molecular hydrogen bonds. The coordination bond cleavages of the two complexes have occurred upon the addition of the H⁺, and have reformed again via the neutralization effect of the OH^?. The changes of the two complexes response to the H⁺/OH^? have observed in the UV–Vis and ¹H NMR spectra.     

π–π stacking motifs in dialkylbis{5‐[(E)‐2‐aryldiazen‐1‐yl]‐2‐hydroxybenzoato}tin(IV) complexes

The diorganotin(IV) complexes of 5‐[(E)‐2‐aryldiazen‐1‐yl]‐2‐hydroxybenzoic acid are of interest because of their structural diversity in the crystalline state and their interesting biological activity. The structures of dimethylbis{2‐hydroxy‐5‐[(E)‐2‐(4‐methylphenyl)diazen‐1‐yl]benzoato}tin(IV), [Sn(CH₃)₂(C₁₄H₁₁N₂O₃)₂], and di‐n‐butylbis{2‐hydroxy‐5‐[(E)‐2‐(4‐methylphenyl)diazen‐1‐yl]benzoato}tin(IV) benzene hemisolvate, [Sn(C₄H₉)₂(C₁₄H₁₁N₂O₃)₂]·0.5C₆H₆, exhibit the usual skew‐trapezoidal bipyramidal coordination geometry observed for related complexes of this class. Each structure has two independent molecules of the Sn^IV complex in the asymmetric unit. In the dimethyltin structure, intermolecular O—H…O hydrogen bonds and a very weak Sn…O interaction link the independent molecules into dimers. The planar carboxylate ligands lend themselves to π–π stacking interactions and the diversity of supramolecular structural motifs formed by these interactions has been examined in detail for these two structures and four closely related analogues. While there are some recurring basic motifs amongst the observed stacking arrangements, such as dimers and step‐like chains, variations through longitudinal slipping and inversion of the direction of the overlay add complexity. The π–π stacking motifs in the two title complexes are combinations of some of those observed in the other structures and are the most complex of the structures examined.     

Polyoxometalate Ionic Liquids as Self‐Repairing Acid‐Resistant Corrosion Protection

Corrosion is a global problem for any metallic structure or material. Herein we show how metals can easily be protected against acid corrosion using hydrophobic polyoxometalate‐based ionic liquids (POM‐ILs). Copper metal disks were coated with room‐temperature POM‐ILs composed of transition‐metal functionalized Keggin anions [SiW₁₁O₃₉TM(H₂O)]^n? (TM=Cu^II, Fe^III) and quaternary alkylammonium cations (C_nH_{2 n+1})₄N⁺ (n=7–8). The corrosion resistance against acetic acid vapors and simulated “acid rain” was significantly improved compared with commercial ionic liquids or solid polyoxometalate coatings. Mechanical damage to the POM‐IL coating is self‐repaired in less than one minute with full retention of the acid protection properties. The coating can easily be removed and recovered by rinsing with organic solvents.     

Self‐Assembly of Imidazolium‐Based Surfactants in Magnetic Room‐Temperature Ionic Liquids: Binary Mixtures

The phase behaviour of binary mixtures of ionic surfactants (1‐alkyl‐3‐imidazolium chloride, C_nmimCl with n=14, 16 and 18) and imidazolium‐based ionic liquids (1‐alkyl‐3‐methylimidazolium tetrachloroferrate, C_nmimFeCl₄, with n=2 and 4) over a broad temperature range and the complete range of compositions is described. By using many complementary methods including differential scanning calorimetry (DSC), polarised microscopy, small‐angle neutron and X‐ray scattering (SANS/SAXS), and surface tension, the ability of this model system to support self‐assembly is described quantitatively and this behaviour is compared with common water systems. The existence of micelles swollen by the solvent can be deduced from SANS experiments and represent a possible model for aggregates, which has barely been considered for ionic‐liquid systems until now, and can be ascribed to the rather low solvophobicity of the surfactants. Our investigation shows that, in general, C_nmimCl is a rather weak amphiphile in these ionic liquids. The amphiphilic strength increases systematically with the length of the alkyl chain, as seen from the phase behaviour, the critical micelle concentration, and also the level of definition of the aggregates formed.     

Tailoring the Structure of Two‐Dimensional Self‐Assembled Nanoarchitectures Based on NiII–Salen Building Blocks

The synthesis of a series of Ni^II–salen‐based complexes with the general formula of [Ni(H₂L)] (H₄L=R²‐N,N′‐bis[R¹‐5‐(4′‐benzoic acid)salicylidene]; H₄L1: R²=2,3‐diamino‐2,3‐dimethylbutane and R¹=H; H₄L2: R²=1,2‐diaminoethane and R¹=tert‐butyl and H₄L3: R²=1,2‐diaminobenzene and R¹=tert‐butyl) is presented. Their electronic structure and self‐assembly was studied. The organic ligands of the salen complexes are functionalized with peripheral carboxylic groups for driving molecular self‐assembly through hydrogen bonding. In addition, other substituents, that is, tert‐butyl and diamine bridges (2,3‐diamino‐2,3‐dimethylbutane, 1,2‐diaminobenzene or 1,2‐diaminoethane), were used to tune the two‐dimensional (2D) packing of these building blocks. Density functional theory (DFT) calculations reveal that the spatial distribution of the LUMOs is affected by these substituents, in contrast with the HOMOs, which remain unchanged. Scanning tunneling microscopy (STM) shows that the three complexes self‐assemble into three different 2D nanoarchitectures at the solid–liquid interface on graphite. Two structures are porous and one is close‐packed. These structures are stabilized by hydrogen bonds in one dimension, while the 2D interaction is governed by van der Waals forces and is tuned by the nature of the substituents, as confirmed by theoretical calculations. As expected, the total dipolar moment is minimized     

Bis[2,4‐diamino‐5‐(3,4,5‐trimethoxybenzyl)pyrimidin‐1‐ium] dl‐malate

<!?tpct=1pt>Racemic malic acid and trimethoprim [5‐(3,4,5‐trimethoxybenzyl)pyrimidine‐2,4‐diamine] form a 1:2 salt (monoclinic, P2₁/c), 2C₁₄H₁₉N₄O₃⁺·C₄H₄O₅²⁻, in which the malate component is disordered across a centre of inversion. The crystal structure of the salt consists of protonated trimethoprim residues and a malate dianion. The carboxylate group of the malate ion interacts with the trimethoprim cation in a linear fashion through pairs of N—H...O hydrogen bonds to form a cyclic hydrogen‐bonded motif. This is similar to the carboxylate–trimethoprim cation interaction observed earlier in the complex of dihydrofolate reductase with trimethoprim. The structure of the salt of trimethoprim with racemic dl ‐malic acid reported here is the first of its kind. The present study investigates the conformations and the hydrogen‐bonding interactions, which are very important for biological functions. The pyrimidine plane makes a dihedral angle of 78.08 (7)° with the benzene ring of the trimethoprim cation. The cyclic hydrogen‐bonded motif observed in this structure is self‐organized, leading to novel types of hydrogen‐bonding motifs in supramolecular patterns.     

Self‐assembled supramolecular sheet‐ and channel‐type frameworks in the p‐phenetidinium hydrogen phthalate and cyclohexylaminium hydrogen phthalate hemihydrate salts

The title compounds, p‐phenetidinium hydrogen phthalate (or 4‐ethoxyanilinium 2‐carboxybenzoate), C₈H₁₂NO⁺·C₈H₅O₄⁻, (I), and cyclohexylaminium hydrogen phthalate hemihydrate (or cyclohexylaminium 2‐carboxybenzoate hemihydrate), C₆H₁₄N⁺·C₈H₅O₄⁻·0.5H₂O, (II), form two‐ and one‐dimensional supramolecular networks, respectively. In (I), the anionic–cationic network consists of R₃²(6) and R₄⁴(16) hydrogen‐bonded rings forming a two‐dimensional sheet along the (001) plane. In (II), O—H...O hydrogen bonds connect the glide‐related anions, generating a supramolecular chain running parallel to [001] to which the cations are linked to form one‐dimensional channels along [001]. The solvent water molecules, which reside on twofold axes, are trapped inside the molecular channels by N—H...O and O—H...O hydrogen bonds.     

Ionic Self‐Assembly and Red‐Phosphorescence Properties of a Charged Platinum(II) 8‐Quinolinol Complex Associated with Ammonium‐Based Amphiphiles

A series of ionic associates based on the platinum(II) chelate of 5‐sulfo‐8‐quinolinol, [Pt(qS)₂]^2?, and ammonium‐based amphiphiles is described. At variance with the prototypical neutral complex Pt(q)₂ (q=8‐quinolinol), these dianionic fluorophores, functionalized at the periphery with sulfonate groups, can be associated by the ionic self‐assembly approach with various ammonium cations, such as (H_{2 n+1}C_n)₂Me₂N⁺ (n=12, 16, 18) or complex ammonium cations carrying three C_n carbon chains (n=12, 14, 16) and an additional amide group. Investigations of their luminescence properties in solution, in the solid state, and, when possible, in thin films revealed that the phosphorescence properties in condensed phases are directly correlated to intermolecular interactions between the luminescent [Pt(qS)₂]^2? centers. Of particular interest is also the formation of a columnar liquid‐crystalline phase around room temperature (between ?25 and +180 °C), as well as the very good film‐forming ability of some of these fluorophores from organic solvents.     

Cross‐coupling reactions in water using ionic liquid‐based palladium(II)–phosphinite complexes as outstanding catalysts

Two new phosphinite ligands based on ionic liquids [(Ph₂PO)C₇H₁₄N₂Cl]Cl ( 1 ) and [(Cy₂PO)C₇H₁₄N₂Cl]Cl ( 2 ) were synthesized by reaction of 1‐(3‐chloro‐2‐hydoxypropyl)‐3‐methylimidazolium chloride, [C₇H₁₅N₂OCl]Cl, with one equivalent of chlorodiphenylphosphine or chlorodicyclohexylphosphine, respectively, in anhydrous CH₂Cl₂ and under argon atmosphere. The reactions of 1 and 2 with MCl₂(cod) (M = Pd, Pt; cod = 1,5‐cyclooctadiene) yield complexes cis‐[M([(Ph₂PO)C₇H₁₄N₂Cl]Cl)₂Cl₂] and cis‐[M(Cy₂PO)C₇H₁₄N₂Cl]Cl)₂Cl₂], respectively. All complexes were isolated as analytically pure substances and characterized using multi‐nuclear NMR and infrared spectroscopies and elemental analysis. The catalytic activity of palladium complexes based on ionic liquid phosphinite ligands 1 and 2 was investigated in Suzuki cross‐coupling. They show outstanding catalytic activity in coupling of a series of aryl bromides or aryl iodides with phenylboronic acid under the optimized reaction conditions in water. The complexes provide turnover frequencies of 57 600 and 232 800 h^?1 in Suzuki coupling reactions of phenylboronic acid with p‐bromoacetophenone or p‐iodoacetophenone, respectively, which are the highest values ever reported among similar complexes for Suzuki coupling reactions in water as sole solvent in homogeneous catalysis. Furthermore, the palladium complexes were also found to be highly active catalysts in the Heck reaction affording trans‐stilbenes. Copyright © 2014 John Wiley & Sons, Ltd.     

Hydro­gen‐bonded supramolecular motifs in 4,4′‐bipyridinium 8‐hydroxy‐7‐iodo­quinoline‐5‐sulfonate dihydrate

In the title compound, C₁₀H₉N₂⁺·C₉H₅INO₄S⁻·2H₂O, the 4,4′‐bi­pyridine mol­ecule is protonated at one of the pyridine N atoms. These moieties self‐assemble into a supramolecular chain along the a axis through N—H⋯N hydrogen bonds. The quinolinol OH group acts as a donor with respect to a sulfonate O atom [O—H⋯O(sulfonate)] and acts as an acceptor with respect to a C—H group of ferron [C—H⋯O(hydroxy)], forming a supramolecular chain along the b axis. These two types of supramolecular chains (one type made up of bi­pyridine motifs and the other made up of sulfoxine motifs) interact viaπ–π stacking, generating a three‐dimensional framework. These chains are further crosslinked by C—­H⋯O hydrogen bonds and O—H⋯O hydrogen bonds involving water mol­ecules.     

Crystal structures and Hirshfeld surface analysis of transition‐metal complexes of 1,3‐azolecarboxylic acids

The crystal structures of five new transition‐metal complexes synthesized using thiazole‐2‐carboxylic acid (2‐Htza), imidazole‐2‐carboxylic acid (2‐H₂ima) or 1,3‐oxazole‐4‐carboxylic acid (4‐Hoxa), namely diaquabis(thiazole‐2‐carboxylato‐κ²N,O)cobalt(II), [Co(C₄H₂NO₂S)₂(H₂O)₂], 1 , diaquabis(thiazole‐2‐carboxylato‐κ²N,O)nickel(II), [Ni(C₄H₂NO₂S)₂(H₂O)₂], 2 , diaquabis(thiazole‐2‐carboxylato‐κ²N,O)cadmium(II), [Cd(C₄H₂NO₂S)₂(H₂O)₂], 3 , diaquabis(1H‐imidazole‐2‐carboxylato‐κ²N³,O)cobalt(II), [Co(C₄H₂N₂O₂)₂(H₂O)₂], 4 , and diaquabis(1,3‐oxazole‐4‐carboxylato‐κ²N,O⁴)cobalt(II), [Co(C₄H₂NO₃)₂(H₂O)₂], 5 , are reported. The influence of the nature of the heteroatom and the position of the carboxyl group in relation to the heteroatom on the self‐assembly process are discussed based upon Hirshfeld surface analysis and used to explain the observed differences in the single‐crystal structures and the supramolecular frameworks and topologies of complexes 1 – 5 .     

The hydrogen‐bonding patterns of 3‐phenylpropylammonium benzoate and 3‐phenylpropylammonium 3‐iodobenzoate: generation of chiral crystals from achiral molecules

The crystal structures and hydrogen‐bonding patterns of 3‐phenylpropylammonium benzoate, C₉H₁₄N⁺·C₇H₅O₂⁻, (I), and 3‐phenylpropylammonium 3‐iodobenzoate, C₉H₁₄N⁺·C₇H₄IO₂⁻, (II), are reported and compared. The addition of the I atom on the anion in (II) produces a different hydrogen‐bonding pattern to that of (I). In addition, the supramolecular heterosynthon of (II) produces a chiral crystal packing not observed in (I). Compound (I) packs in a centrosymmetric fashion and forms achiral one‐dimensional hydrogen‐bonded columns through charge‐assisted N—H...O hydrogen bonds. Compound (II) packs in a chiral space group and forms helical one‐dimensional hydrogen‐bonded columns with 2₁ symmetry, consisting of repeating R₄³(10) hydrogen‐bonded rings that are commonly observed in ammonium carboxylate salts containing chiral molecules. This hydrogen‐bond pattern, which has been observed repeatedly in ammonium carboxylate salts, thus provides a means of producing chiral crystal structures from achiral molecules.     

Self‐assembly of a mixed‐ligand silver‐based coordination polymer

The novel title silver(I) coordination polymer, catena‐poly­[[aceto­nitrile­silver(I)]‐di‐μ‐4‐[N‐(di­phenyl­phosphino)­amino­meth­yl]­pyridine‐κ²N¹:P;κ²P:N¹‐[aceto­nitrile­silver(I)]‐μ₃‐4‐[N,N‐bis­(di­phenyl­phosphino)­amino­methyl]­pyridine‐κ³N¹:P:P′‐bis­[aceto­nitrile­silver(I)(Ag—Ag)]‐μ₃‐4‐[N,N‐bis­(di­phenyl­phosphino)­amino­methyl]­pyridine‐κ³P:P′:N¹] tetra­kis­(tetra­fluoro­borate) aceto­nitrile trisolvate], {[Ag₄(C₂H₃N)₄(C₁₈H₁₇N₂P)₂(C₃₀H₂₆N₂P₂)₂](BF₄)₄·3C₂H₃N}_n, is formed by the self‐assembly of the Ph₂P(4‐NHCH₂C₅H₄N) and (Ph₂P)₂(4‐NCH₂C₅H₄N) ligands with silver tetra­fluoro­borate. The polymer consists of alternating rings (which lie about inversion centers) bridged by the pyridyl rings of the bis‐phosphine‐substituted ligands, with anions hydrogen bonded the length of the chain. Two distinctly different metal coordination environments exist in the polymer, viz. distorted tetrahedral and trigonal geometries.     

Hydro­gen‐bonding patterns in 2‐amino‐4,6‐di­methyl­pyrimidinium hydrogen sulfate

In the title compound, C₆H₁₀N₃⁺·HSO₄⁻, the asymmetric unit consists of a hydrogen sulfate anion and a 2‐amino‐4,6‐di­methyl­pyrimidinium cation. The hydrogen sulfate anions self‐assemble through O—H⋯O hydrogen bonds, forming supramolecular chains along the b axis, while the organic cations form base pairs via N—H⋯N hydrogen bonds. The amino­pyrimidinium cations join to the sulfate anions via a pair of hydrogen bonds donated from the pyrimidinium protonation site and from the exo amine group cis to the protonated site.     

Hydrogen‐bonding network of N,N′‐bis[2‐(tert‐butyldimethylsiloxy)ethyl]ethylenediammonium dichloride

The title salt, C₁₈H₄₆N₂O₂Si₂²⁺·2Cl⁻, has been synthesized by reaction of N,N′‐bis(2‐hydroxyethyl)ethylenediamine with tert‐butyldimethylsilyl chloride. The zigzag backbone dication is located across an inversion centre and the two chloride anions are related by inversion symmetry. The ionic components form a supramolecular two‐dimensional network via N—H...Cl hydrogen bonding, which is responsible for the high melting point compared with the oily compound N,N′‐bis[2‐(tert‐butyldimethylsiloxy)ethyl]ethylenediamine.