The interlocking of ring and axle molecular components in rotaxanes provides a way to combine chromophoric, electron-donor and electron-acceptor moieties in the same molecular entity, in order to reproduce the features of photosynthetic reaction centers. To this aim, the photoinduced electron transfer processes involving a 1,8-naphthalimide chromophore, embedded in several rotaxane-based dyads, were investigated by steady-state and time-resolved absorption and luminescence spectroscopic experiments in the 300 fs–10 ns time window. Different rotaxanes built around the dialkylammonium/ dibenzo[24]crown-8 ether supramolecular motif were designed and synthesized to decipher the relevance of key structural factors, such as the chemical deactivation of the ammonium-crown ether recognition, the presence of a secondary site for the ring along the axle, and the covalent functionalization of the macrocycle with a phenothiazine electron donor. Indeed, the conformational freedom of these compounds gives rise to a rich dynamic behavior induced by light and may provide opportunities for investigating and understanding phenomena that take place in complex (bio)molecular architectures. 相似文献
Towards polythiophene polyrotaxanes : The β‐substituted terthiophene [2]rotaxanes have been synthesized (see figure). Basic optical and electrochemical properties of the synthesized [2]rotaxanes are also reported.
The template-directed synthesis of a bistable tripodal [4]rotaxane, which has cyclobis(paraquat-p-phenylene) (CBPQT4+) as the pi-electron-deficient rings, and tetrathiafulvalene (TTF) and 1,5-dioxynaphthalene units as the pairs of pi-electron-rich recognition sites located on all three legs of the tripodal dumbbell, is described. The chemical and electrochemical oxidation of the [4]rotaxane and its tripodal dumbbell have allowed us to unravel an unprecedented TTF.+ radical cation dimerization. In fact, two types of TTF dimers, namely, the radical cation dimer [TTF.+]2 and the mixed-valence one [(TTF)2].+, have been observed at room temperature for the tripodal dumbbell, whereas, in the case of the [4]rotaxane, only the radical cation dimer [TTF.+]2 is formed. This anomaly can be explained if it is accepted that most of the neutral TTF units in the [4]rotaxane are encircled by CBPQT4+ rings, which renders the formation of the mixed-valence dimer [(TTF)2].+ highly unfavorable. 相似文献
A bis‐branched [3]rotaxane, with two [2]rotaxane arms separated by an oligo(para‐phenylenevinylene) (OPV) fluorophore, was designed and investigated. Each [2]rotaxane arm employed a difluoroboradiaza‐s‐indacene (BODIPY) dye‐functionalized dibenzo[24]crown‐8 macrocycle interlocked onto a dibenzylammonium in the rod part. The chemical structure of the [3]rotaxane was confirmed and characterized by 1H and 13C NMR spectroscopy and high‐resolution ESI mass spectrometry. The photophysical properties of [3]rotaxane and its reference systems were investigated through UV/Vis absorption, fluorescence, and time‐resolved fluorescence spectroscopy. An efficient energy‐transfer process in [3]rotaxane occurred from the OPV donor to the BODIPY acceptor because of the large overlap between the absorption spectrum of the BODIPY moiety and the emission spectrum of the OPV fluorophore; this shows the important potential of this system for designing functional molecular systems. 相似文献
Macromolecular [2]rotaxanes comprising a polymer axle and crown ether wheel were synthesized to evaluate the effect of component mobility on the properties of the axle polymer, especially its crystallinity. Living ring‐opening polymerization of δ‐valerolactone with a pseudorotaxane initiator with a hydroxy group at the axle terminus was followed by end‐capping with a bulky isocyanate. This yielded macromolecular [2]rotaxanes (M2Rs) possessing polyester axles of varying molecular weights. The crystallinity of the axle polymers of two series of M2Rs, with either fixed and movable components, was evaluated by differential scanning calorimetry. The results revealed that the effect of component mobility was significant in the fixed and movable M2Rs with a certain axle length, thus suggesting that the properties of the axle polymer depend on the mobility of the polyrotaxane components. 相似文献
The anion‐templated synthesis of three novel halogen‐bonding 5‐halo‐1,2,3‐triazolium axle containing [2]rotaxanes is described, and the effects of altering the nature of the halogen‐bond donor atom together with the degree of inter‐component preorganisation on the anion‐recognition properties of the interlocked host investigated. The ability of the bromotriazolium motif to direct the halide‐anion‐templated assembly of interpenetrated [2]pseudorotaxanes was studied initially; bromide was found to be the most effective template. As a consequence, bromide anion templation was used to synthesise the first bromotriazolium axle containing [2]rotaxane, the anion‐binding properties of which, determined by 1H NMR spectroscopic titration experiments, revealed enhanced bromide and iodide recognition relative to a hydrogen‐bonding protic triazolium rotaxane analogue. Two halogen‐bonding [2]rotaxanes with bromo‐ and iodotriazolium motifs integrated into shortened axles designed to increase inter‐component preorganisation were also synthesised. Anion 1H NMR spectroscopic titration experiments demonstrated that these rotaxanes were able to bind halide anions even more strongly, with the iodotriazolium axle integrated rotaxane capable of recognising halides in aqueous solvent media. Importantly, these observations suggest that a halogen‐bonding interlocked host binding domain, in combination with increased inter‐component preorganisation, are requisite design features for a potent anion receptor. 相似文献
Bistable [2]rotaxanes have been attached through a bulky tripodal linker to the surface of titanium dioxide nanoparticles and studied by cyclic voltammetry and spectroelectrochemical methods. The axle component in the [2]rotaxane contains two viologen sites, V1 and V2, interconnected by a rigid terphenylene bridge. In their parent dication states, V12+ and V22+ can both accommodate a crown ether ring, C, but are not equivalent in terms of their affinity towards C and have different electrochemical reduction potentials. The geometry and size of the tripodal linker help to maintain a perpendicular [2]rotaxane orientation at the surface and to avoid unwanted side‐to‐side interactions. When the rigid [2]rotaxane or its corresponding axle are adsorbed on a TiO2 nanoparticle, viologen V22+ is reduced at significantly more negative potentials (?0.3 V) than in flexible analogues that contain aliphatic bridges between V1 and V2. These overpotentials are analysed in terms of electron‐transfer rates and a donor–bridge–acceptor (D–B–A) formalism, in which D is the doubly reduced viologen, V10, adjacent to the TiO2 surface (TiO2–V10), B is the terphenylene bridge and A is viologen V22+. We have also found that, in contrast with earlier findings in solution, no molecular shuttling occurs in rigid [2]rotaxane adsorbed at the surface. The observations were explained by the relative position of the viologen stations within the electrical double layer, screening of V22+ by the counterions and high capacity of the medium, which reduces the mobility of the crown ether. The results are useful in transposing of solution‐based molecular switches to the interface or in the design and understanding of the properties of systems comprising electroactive and/or interlocked molecules adsorbed at the nanostructured TiO2 surface. 相似文献
Rotaxane building blocks bearing 3,5-bis(trifluoromethyl) benzenesulfonate (BTBS) stoppers have been efficiently prepared from a pillar[5]arene derivative, 3,5-bis(trifluoromethyl) benzenesulfonyl chloride (BTBSCl) and different diols, namely 1,10-decanediol and 1,12-dodecanediol. The BTBS moieties of these compounds are good leaving groups and stopper exchange reactions could be achieved by treatment with different nucleophiles thus affording rotaxanes with ester, thioether or ether stoppers. 相似文献
Two ferrocenylmethyl ammonium salts were used as axle components of pseudorotaxanes with dibenzo[24]crown‐8. The pseudorotaxane with an alkyne terminal group in the axle component underwent a Cu‐catalyzed Huisgen coupling reaction (click reaction) with an alkyl azide to afford cationic [2]rotaxanes with a triazole group in the axle molecule. The rotaxane reacted with Ac2O to produce neutral rotaxanes with an amide group in the axle component. Both cationic and neutral rotaxanes were treated with K[PtCl3(CH2?CH2)] to form the PtII‐containing rotaxanes. 相似文献
A new class of donor-{saturated hydrocarbon bridge}-acceptor (D-B-A) dyads were synthesized and utilized on a systematic approach to evaluate the corresponding photoinduced electron transfer (ET) process. Among these dyads heptacyclo[6.6.0.02,6.03,13.04,11. 05,9.010,14]tetradecane (HCTD) was used as a unique spacer, which possesses a geometry of high symmetry (D2d), rigidity and linearity. The spectroscopy and dynamics of excited-state ET as functions of donor/acceptor electronic states, orientation as well as solvent properties were analyzed with the aid of theoretical computations. It was observed that the quenching of donor fluorescence (the F1 band) correlated with the appearance of a broad charge-transfer (CT) emission. Both wavelength and intensity of the CT band varied with solvent-polarity, whereas its rise dynamics complied well with the decay of the F1 band. In acetonitrile, the CT state decays much faster than the rate of ET (∼63 ps−1) so that the corresponding steady-state emission cannot be resolved. An intriguing effect was observed in the case of benzene-1,2-dithioketals (3a and 3b) where the D and A π-chromophores were aligned in different orientations. The estimated ET rate of 3a (3.9×1010 s−1) was substantially faster than that of 3b (7×108 s−1). The experimental data were tentatively fitted by a semi-log plot of ET rate constants (ket) against free energy (ΔG0), yielding a value of ∼17.3 cm−1 for the electron-coupling matrix (Hel). 相似文献
A new example of a linear [5]rotaxane has been synthesized by using the traditional "gathering-and-threading" approach but based on an unusual axle incorporating a symmetrical bis(bidentate) chelating fragment built on a 4,7-phenanthroline core. The stoppering reaction is particularly noteworthy since, instead of using a trivial bulky stopper as precursor to the blocking group, two semistoppered copper-complexed [2]pseudorotaxanes (namely [2]semirotaxanes) are used, which leads to the desired [5]rotaxane in good yield. The efficiency of the method relies on the use of "click" chemistry, with its very mild conditions, and on the protection by a transition-metal (copper(I)) of the various coordinating groups present in the fragments to be interconnected (terpy and bidentate chelating groups), thus inhibiting potential detrimental side reactions during the copper-catalyzed stoppering reaction. Since the external fragments and the central core of the system contain tri- and bidentate chelating units, respectively, the axle of the final [5]rotaxane incorporates two types of coordinating units: two external terpy groups (terpy: 2,2':6',2'-terpyridine) and two central bidentate ligands. Such a situation enables the system to tidy two different metals centers, and to localize them in a priori well-defined positions. This is what was observed when mixing the free ligand with a mixture of Zn(2+) and Li(+) : the zinc(II) ions were unambiguously shown to occupy the external sites, whereas the Li(+) cations were found in the central part of the [5]rotaxane. An X-ray diffraction study carried out on a [3]pseudorotaxane, the axis of which is similar to the central part of the [5]rotaxane axle, demonstrates that Zn(2+) is clearly five-coordinate, the fifth ligand being a counterion, even when the coordination site of the pseudorotaxane is designed for four-coordinate metals, which is in marked contrast with copper(I) or Li(+) . 相似文献
Two Janus [2]rotaxanes, 5a and 5b , with α‐cyclodextrin (α‐CD) derivatives substituted on the 6‐position with two recognition sites (azobenzene and heptamethylene (C7)) that were linked with linkers of different lengths (oligo(ethylene glycol) with a degree of polymerization equal to 2 or approximately 21) were synthesized and characterized. 2D ROESY NMR spectroscopy and circular dichroism (cd) spectra demonstrated that the recognition site of the α‐CD moiety was switched by photoisomerization of the azobenzene moiety in 5a and 5b . The different size changes of 5a and 5b in hydrodynamic radius (RH) owing to the different length of linker between two recognition sites were observed by pulse‐field‐gradient spin‐echo NMR spectroscopy. The kinetic results indicated that the different length of linker had no or a weak effect for the photoisomerization process of 5a and 5b . 相似文献
A novel supramolecular system, which is made up of a dibenzo[24]crown‐8 (DB24C8) ring component linked with a calix[4]arene derivative, a dumbbell component, containing a secondary ammonium center (‐NR2H2+‐) and a 4,4′‐bipyridinium (BIPY2+) unit, and stoppered with two 3,5‐di‐tert‐butylphenyl groups on the two termini of the dumbbell component, has been synthesized. The system displays a combination of two processes: the pH‐induced shuttling of a DB24C8 ring and the complexation/decomplexation of K+ ions. The switching process of this supramolecular system was investigated in detail by 1H NMR spectroscopy. The results showed that the supramolecular system can only switch smoothly in CD3CN. The two separated switchable processes can run together smoothly in this supramolecular system. 相似文献
Selective monofunctionalization of substrates with distant, yet equally reactive functional groups is difficult to achieve, as it requires the second functional group to selectively modulate its reactivity once the first functional group has reacted. We now show that mechanically interlocked catalytic rings can effectively regulate the reactivity of stoppering groups in rotaxanes over a distance of about 2 nm. Our mechanism of communication is enabled by a unique interlocked design, which effectively removes the catalytic rings from the substrates by fast dethreading as soon as the first reaction has taken place. Our method not only led to a rare example of selective monofunctionalization, but also to a “molecular if function”. Overall, the study presents a way to get distant functional groups to communicate with each other in a reaction-history-dependent manner by creating linkers that can ultimately perform logical operations at the molecular level. 相似文献
Five different highly fluorescent boron‐dipyrromethene (BODIPY)‐tagged N‐heterocyclic carbene NHC–gold halide complexes were synthesized. The substitution of the halogeno ligand by 4‐substituted aryl thiolates leads to a decrease in the brightness of the complexes. This decrease depends on the electronic nature of the thiols, being most pronounced with highly electron‐rich thiols (4‐R=NMe2). The brightness of the gold thiolates also depends on the distance between the sulfur atom and the BODIPY moiety. The systematic variation of the electron density of [(NHC–bodipy)Au(SC6H4R)] (via different R groups) enables the systematic variation of the fluorescence brightness of an appended BODIPY fluorophore. Based on this and supported by DFT calculations, a photoinduced electron‐transfer quenching appears to be the dominant mechanism controlling the brightness of the appended BODIPY dye. 相似文献
Two functional main‐chain linear polyrotaxanes, one a covalent polymeric chain that threads through many macrocycles ( P1 ) and the other a poly[n]rotaxane chain that is composed of many repeating rotaxane units ( P2 ), were synthesized by employing strong crown‐ether/ammonium‐based ( DB24C8 / DBA ) host–guest interactions and click chemistry. Energy transfer between the wheel and axle units in both polyrotaxanes was used to provide insight into the conformational information of their resulting polyrotaxanes. Steady‐state and time‐resolved spectroscopy were performed to understand the conformation differences between polymers P1 and P2 in solution. Additional investigations by using dynamic/static light scattering and atomic force microscopy illustrated that polymer P1 was unbending and had a rigid rod‐like structure, whilst polymer P2 was curved and flexible. This flexible topology facilitated the self‐assembly of polymer P2 into relatively large ball‐shaped particles. In addition, the energy transfer between the wheel and axle units was controlled by the addition of specific anions or base. The anion‐induced energy enhancement was attributed to a change in electrostatic interactions between the polymer chains. The base‐driven molecular shuttle broke the DB24C8 / DBA host–guest interactions. These results confirm that both intra‐ and intermolecular electrostatic interactions are crucial for modulating conformational topology, which determines the assembly of polyrotaxanes in solution. 相似文献