含氟液晶研究进展

本文简述了含氟液晶的研究进展。根据小分子含氟液晶中氟原子或含氟基团的位置不同,将其分为3类：末端是氟原子或含氟基团的液晶、苯环上氢原子被氟原子取代的液晶、中心桥键上的氢原子被氟原子取代的液晶。根据小分子含氟液晶特点,归纳了氟原子或含氟基团对液晶分子物理性质的影响。同时对高分子含氟液晶的研究进展也做了介绍。     

侧向多氟取代二芳基乙炔类液晶的合成及性能

以对烷基溴苯和4-溴-2,3-二氟苯酚为原料,经芳基硼酸化、Suzuki偶联反应、Sonogashira偶联反应和碘代等反应,制得16种侧向多氟取代二芳基乙炔类液晶化合物,其结构经IR、NMR和MS确认。利用差示扫描量热仪(DSC)、偏光显微镜(POM)和阿贝折光仪对该系列化合物进行了性能研究。结果表明,该系列化合物具有较低的熔点、宽的液晶相区以及较高的光学各向异性值(Δn>0.3)。该类液晶具有在双频液晶中应用的广阔前景。     

Synthesis and characterization of monodisperse oligo(fluorene-co-bithiophene)s

A series of monodisperse oligo(9,9-di-n-octylfluorene-co-bithiophene)s (OFbTs) with molecular lengths of up to 19.5 nm and molecular weights up to 7025 g mol(-1) has been synthesized by a divergent/convergent approach involving Stille coupling reactions. Stille coupling is quite efficient in preparing this class of oligomers, and even the molecule with nine fluorene units and eight bithiophene units (F9Th16) can be synthesized in a yield as high as 70 %. Because of easy functionalization of the thiophene ring at its alpha position, no additional protecting group allowing activation for further reaction is necessary. However, the synthetic routes must be optimized to eliminate contamination of the targeting compounds with the homocoupling product of the organotin reagents. Synthesis of the longest oligomer F13Th24 in a relative large quantity is limited by its low yield due to the pronounced ligand-exchange side reactions of the starting materials and reaction intermediates. All oligomers longer than F4Th6 are nematic mesomorphs and exhibit enhanced glass transition temperature and clearing point with increasing molecular length, as revealed by differential scanning calorimetry and polarizing optical microscopy. Absorption and photoluminescence (PL) measurements reveal that OFbTs are well-conjugated systems with an effective conjugation length longer than the length of F13Th24.     

侧向二氟取代酯类液晶的合成

有源矩阵液晶显示(AM-LCD)发明于上世纪70年代末,但真正应用是在上世纪80年代中期。目前,主要是薄膜晶体管液晶显示(TFT-LCD),利用这种技术实现了视频图象显示,主要应用于摄像机、便携式计算机和各种终端显示器。近几年来,垂直排列有源矩阵液晶显示技术(VA)得到了飞速的发展,已成为LCD发展的主要方向之一。     

Nematic Liquid Crystals for Active Matrix Displays: Molecular Design and Synthesis

Substances forming calamitic mesophases have been known for more than 100 years but only the recent, rapid advance in active matrix liquid crystal display (AM‐LCD) technology helped these materials to achieve the crucial position in flat panel display technology they hold today. Due to their high contrast, large viewing angle, and rapid switching times, modern AM‐LCDs offer a superior picture quality even compared to conventional cathode ray tubes. Their flatness, low weight, and low energy consumption render them the technology of choice for all kinds of portable devices. Some of the future promises of AM‐LCD technology are centered around the development of liquid crystalline materials for the different subtypes of active matrix applications. This development is aimed, on the one hand, towards improved electrooptical and viscoelastic properties; on the other hand, the increasing performance of LCDs leads to extremely stringent reliability demands on the liquid crystals. Responding to these high standards of performance and quality, most liquid crystals for contemporary AM‐LCD applications are multiply fluorinated compounds with very high purities, as is typical for materials used in the electronics industry. The synthesis of these superfluorinated materials (SFMs) often requires specialized methods, which, in several cases, had to be introduced for the first time into the canon of industrial production. The immense market pressure, as well as the rapid advance of AM‐LCD technology on the side of the display manufacturers, urges an increasing pace of the materials development. This demand for new materials can no longer be fulfilled by conventional trial‐and‐error approaches. As in the pharmaceutical industry, in the search for new, superior liquid crystals, the purely empirical methods are increasingly supported by a rational design based on computational methods.     

溶致液晶及其在纳米结构材料合成中的应用

有序纳米结构材料是一类具有广泛应用前景的新材料,在分离、催化、传感器等领域的应用潜力巨大。近年来,利用溶致液晶模板合成纳米结构颗粒和薄膜材料的研究取得了一系列重要进展,包括新纳米结构金属和半导体材料的合成、由过渡金属水合物与表面活性剂构建的新液晶体系、溶致液晶与其它模板结合制备具有多级孔结构的新材料、影响液晶体系及纳米结构材料有序性与稳定性的关键因素、以及纳米结构形成机理等方面的内容。本文就上述几个方面的近期研究成果进行了总结与综述,并展望了利用溶致液晶模板合成纳米结构材料需要进一步深入开展的内容,有助于化学、化学工程和材料科学等领域的相关研究工作。     

在离子液中无水碳酸钾参与的串联甲磺酸取代苯酯脱保护和芳香亲核取代反应来合成不对称二芳醚

本文报道了一种在离子液[Bmim]BF4中，由无水碳酸钾参与的串联甲磺酸取代苯酯脱保护和芳香亲核取代反应来合成不对称二芳醚的方法。离子液可以循环使用多次，而且此实验操作具有便捷、实用与环境友好的特点。     

几类非常规液晶材料的研究进展

本文综述了液晶二聚体、多爪型液晶及香蕉形液晶等几类非常规液晶材料的研究进展。结合笔者近几年的研究积累,着重介绍:(1)液晶二聚体的分子结构与液晶态结构及液晶二聚体所特有的奇偶效应与近晶多形性;(2)多爪型液晶的分子结构与液晶态结构的特点及由于兼有棒状分子与盘状分子的结构特点而具备的特殊的相变性质;(3)香蕉形液晶的分子结构与液晶态结构及香蕉形液晶所特有的手性与极化序。在介绍各类液晶材料的特点及研究热点的同时,围绕分子结构与液晶态结构的关系这一主题,深入讨论了各种液晶材料形成特殊分子排列及表现出特殊物理性质的机理。     

Synthesis and Characterization of Star-like Liquid Crystals Centered by Silicon

The synthesis and characterization of two new star-like liquid crystals are reported. They are made of a silicon core and four alkoxyazobenzene monomers in the periphery. Theirp hase behaviors and the structures are determined by infrared absorption spectroscopy (IR), nuclear magnetic resonance spectroscopy (NMR), elemental analysis (EA), polarizing optical microscope (POM) and differential scanning calorimetry (DSC).     

Amide as Terminal Groups: Synthesis and Properties as New Tolane‐Type Liquid Crystals

A series of novel tolane‐type liquid crystals with amide group as terminal group have been prepared. The terminal amide groups were modified, and the influence of these structural parameters on liquid crystal phases was investigated by polarizing optical microscope (POM) and differential scanning calorimetry (DSC). Three of these new compounds exhibit nematic phase, good thermal stabilities. In general, these liquid crystals with amide as end groups have high melting points and phase transition temperatures, which result from the hydrogen bonds. Based on theoretical calculations, these new molecules with strong electron donating amide as end group have narrower HOMO‐LUMO energy gap and higher dipole moment than tolane.     

Synthesis and Characterization of Liquid-Crystalline Tetraoxapentacene Derivatives Exhibiting Aggregation-Induced Emission

A series of new tetrakis(dialkoxyphenyl) dicyanotetraoxapentacene derivatives ( 1 a – c ) were prepared by reaction of the appropriate terphenyl diols with tetrafluoroterephthalonitrile in good yields. Compounds 1 b and 1 c , which bear hexyloxy and decyloxy side chains, exhibited columnar hexagonal mesophases, as shown by polarized optical microscopy, variable-temperature powder X-ray diffraction, and differential scanning calorimetry. Single-crystal X-ray diffraction of methoxy-substituted 1 a revealed that the dicyanotetraoxapentacene core is highly planar, consistent with the notion that these molecules are able to stack in columnar mesophases. A detailed photophysical characterization showed that these compounds exhibit aggregation-induced emission in solution, emission in nonpolar solvents, weak emission in polar solvents, and strong emission in the solid state both as powder and in thin films. These observations are consistent with a weakly emissive charge-transfer state in polar solvents and a more highly emissive locally excited state in nonpolar solvents.     

Simulation of texture evolution for nematic liquid crystalline polymers under shear flow

The development of microstructure in nematic liquid crystalline polymers under shear flow is investigated through computational simulation. By using a tensorial expression for the elastic torque, the nemato-dynamic equation is numerically resolved. The simulation shows that elastic anisotropy has a strong influence on the evolution of the director and that the ‘log-rolling’ orientation of the directors emerges for tumbling nematics if the twist constant is smaller than the splay and the bend constants, even though one starts from a structure in which the directors are aligned within the velocity and velocity gradient plane. The interaction of wedge disclination pairs subject to a shear flow field is also simulated. The generation, multiplication and interaction of inversion wall defects during shearing have been revealed. In general the wall moves to the boundaries and is absorbed by the boundaries. When two walls of opposite orientation meet, a loop may form, then shrink, and finally collapse. Correspondingly, if they have the same orientation, commutation will occur.     

纤维素及其衍生物液晶研究近况

就纤维素及其衍生物溶性液晶和热致性液晶的液晶性及其影响因素,和流变性能等方面的研究作了较为详尽的综述。     

Polymerizable Ionic Liquid Crystals

Polymerizable vinylimidazolium ionic liquids (ILs) that contain mesogenic coumarin and biphenyl units, respectively, have been synthesized. The N‐alkylation of N‐vinylimidazole with bromoalkylated mesogenic units 7‐(6‐bromohexyloxy)coumarin ( 1 ) and 4,4′‐bis(6‐bromohexyloxy)biphenyl ( 2 ) was then carried out. The thermal behavior of the obtained ILs 3 and 4 was investigated by differential scanning calorimetry and polarizing optical microscopy. These measurements showed that the attached mesogenic units induce the self‐assembly of ILs and, therefore, the occurrence of liquid crystalline phases. Subsequently, the ionic liquid crystals (ILCs) 3 and 4 were polymerized by a free‐radical mechanism.

     

纤维素及其衍生物液晶研究新进展

本文全面地综述了纤维素及其衍生物溶致性液晶和热致性液晶的形成, 液晶性与大分子链结构, 以及具有胆甾型液晶相结构的纤维素衍生物复合材料等方面的最新研究进展。     

含氟丁烯联苯类液晶新方法合成及性能

含氟丁烯类液晶是一类新型具有低熔点和较高清亮点的液晶材料。 本文提出了一条新的方法合成关键中间体,采用以3-氟苄氯为起始原料,经Arbuzov、Wittig-Horner、催化氢化、锂化-硼酸化4步反应制备,避免了环己烷的异构化和脱氟副反应。 经过合成优化,总收率由4.5%提高到30%,具备较高的应用价值。 物理性能测试表明,该类化合物在配方中的虚拟清亮点达到127.7 ℃、展区常数K₁₁值高达19.7。 光电测试表明,该类化合物能够缩短10%的液晶总响应时间,与该类化合物粘弹系数小的特点相吻合。 新型含氟丁烯液晶为开发高性能混合液晶提供了新的单体液晶材料。     

Catalyst-free N-arylation using unactivated fluorobenzenes

Caught in a 'S(N) Ar'e: A one-step, high-yielding, catalyst-free method is described for N-arylation of azoles and indoles from unactivated monofluorobenzenes. This S(N) Ar reaction tolerates a wide range of substituents and can also generate halogenated N-aryl products. The reaction can also be performed simultaneously with or subsequent to a copper- or palladium-catalyzed cross-coupling reaction in the same pot.     

两个新的氢键诱导液晶化合物的合成

通过４－丁氧基苯甲酸（４ＢＡ０与两个手性取代的苯乙烯基吡啶（ＶＳＺ及ＬＳＺ）间的氢键作用合成了２个新的液晶化合物，用ＤＳＣ、偏光显微镜研究了其液晶行为，并由红外光谱证实了分子间氢键的存在，形成的复合物４ＢＡ－ＶＳＺ具有手性近晶Ｃ相。     

新颖的含乙炔桥键液晶分子设计与合成

为降低液晶分子的双折射率并获得宽液晶相区, 用环己基替代传统二苯乙炔液晶分子中的一个苯环, 得到一类结构新颖的含乙炔桥键的负介电各向异性液晶分子4a, 4b. 目标化合物采用1-trans-4-(trans-4-正戊基环己基)环己基乙炔与4-碘-2,3-二氟苯基醚进行Sonogashira偶联反应制备, 反应总产率27%～28%. 产物结构经MS, IR, NMR鉴定确认. 采用DSC结合偏光显微镜对液晶相变温度进行了测试, 结果表明新化合物4a, 4b清亮点分别为212, 216 ℃, 向列相温区均达到140 ℃, 与传统二苯乙炔类液晶的相变温区基本相当. 物理性能测试表明, 分子骨架共轭程度的削弱不仅使双折射率大幅降低, 而且介电各向异性绝对值还有所增大, 为分子设计提供了新的思路. 新化合物综合性能得到显著改善, 在大尺寸液晶电视领域具有非常好的应用前景.