ACQ‐to‐AIE Transformation: Tuning Molecular Packing by Regioisomerization for Two‐Photon NIR Bioimaging

The traditional design strategies for highly bright solid‐state luminescent materials rely on weakening the intermolecular π–π interactions, which may limit diversity when developing new materials. Herein, we propose a strategy of tuning the molecular packing mode by regioisomerization to regulate the solid‐state fluorescence. TBP‐e‐TPA with a molecular rotor in the end position of a planar core adopts a long‐range cofacial packing mode, which in the solid state is almost non‐emissive. By shifting molecular rotors to the bay position, the resultant TBP‐b‐TPA possesses a discrete cross packing mode, giving a quantum yield of 15.6±0.2 %. These results demonstrate the relationship between the solid‐state fluorescence efficiency and the molecule's packing mode. Thanks to the good photophysical properties, TBP‐b‐TPA nanoparticles were used for two‐photon deep brain imaging. This molecular design philosophy provides a new way of designing highly bright solid‐state fluorophores.     

Synthesis,Photophysical Properties and Two‐Photon Absorption Study of Tetraazachrysene‐based N‐Heteroacenes

Three novel N‐heteroacene molecules ( SDNU‐1 , SDNU‐2 and SDNU‐3 ) based on tetraazachrysene units as cores have been designed, synthesized and fully characterized. Their photophysical, electrochemical and fluorescence properties were investigated, and they exhibited blue to green emission in the solid state. Interestingly, SDNU‐2 exhibited high solid photoluminescence quantum efficiencies (75.3 %), which is the highest value of N‐heteroacenes derivatives to date. Two‐photon absorption studies have been conducted by using the open and close aperture Z‐san technique. SDNU‐3 showed a significant enhancement in the two‐photon absorption cross‐section with magnitudes as high as about 700 GM (1 GM=1×10^?50 cm⁴ s/photon) when excited with 800 nm light, which is the largest value based on a heteroacene system measured by using a Z‐scan experiment so far. We attribute the outcome to sufficient electronic coupling between the strong charge transfer of quadrupolar substituents and the tetraazachrysene core. Our result would provide a new guideline to design novel efficient two‐photon materials based on N‐heteroacene cores.     

Versatile Photophysical Properties of meso‐Aryl‐Substituted Subporphyrins: Dipolar and Octupolar Charge‐Transfer Interactions

Donor–acceptor systems based on subporphyrins with nitro and amino substituents at meta and para positions of the meso‐phenyl groups were synthesized and their photophysical properties have been systematically investigated. These molecules show two types of charge‐transfer interactions, that is, from center to periphery and periphery to center depending on the peripheral substitution, in which the subporphyrin moiety plays a dual role as both donor and acceptor. Based on the solvent‐polarity‐dependent photophysical properties, we have shown that the fluorescence emission of para isomers originates from the solvatochromic, dipolar, symmetry‐broken, and relaxed excited states, whereas the non‐solvatochromic fluorescence of meta isomers is of the octupolar type with false symmetry breaking. The restricted meso‐(4‐aminophenyl) rotation at low temperature prevents the intramolecular charge‐transfer (ICT)‐forming process. The two‐photon absorption (TPA) cross‐section values were determined by photoexcitation at 800 nm in nonpolar toluene and polar acetonitrile solvents to see the effect of ICT on the TPA processes. The large enhancement in the TPA cross‐section value of approximately 3200 GM (1 GM=10^?50 cm⁴ s photon^?1) with donor–acceptor substitution has been attributed to the octupolar effect and ICT interactions. A correlation was found between the electron‐donating/‐withdrawing abilities of the peripheral groups and the TPA cross‐section values, that is, p‐aminophenyl>m‐aminophenyl>nitrophenyl. The increased stability of octupolar ICT interactions in highly polar solvents enhances the TPA cross‐section value by a factor of approximately 2 and 4, respectively, for p‐amino‐ and m‐nitrophenyl‐substituted subporphyrins. On the other hand, the stabilization of the symmetry‐broken, dipolar ICT state gives rise to a negligible impact on the TPA processes.     

Ultrafast Photoinduced Charge Separation Leading to High‐Energy Radical Ion‐Pairs in Directly Linked Corrole–C60 and Triphenylamine–Corrole‐C60 Donor–Acceptor Conjugates

Closely positioned donor–acceptor pairs facilitate electron‐ and energy‐transfer events, relevant to light energy conversion. Here, a triad system TPACor‐C₆₀ , possessing a free‐base corrole as central unit that linked the energy donor triphenylamine ( TPA ) at the meso position and an electron acceptor fullerene (C₆₀) at the β‐pyrrole position was newly synthesized, as were the component dyads TPA‐Cor and Cor‐C₆₀ . Spectroscopic, electrochemical, and DFT studies confirmed the molecular integrity and existence of a moderate level of intramolecular interactions between the components. Steady‐state fluorescence studies showed efficient energy transfer from ¹ TPA* to the corrole and subsequent electron transfer from ¹corrole* to fullerene. Further studies involving femtosecond and nanosecond laser flash photolysis confirmed electron transfer to be the quenching mechanism of corrole emission, in which the electron‐transfer products, the corrole radical cation ( Cor^?+ in Cor‐C₆₀ and TPA‐Cor^?+ in TPACor‐C₆₀ ) and fullerene radical anion (C₆₀^??), could be spectrally characterized. Owing to the close proximity of the donor and acceptor entities in the dyad and triad, the rate of charge separation, k_CS, was found to be about 10¹¹ s^?1, suggesting the occurrence of an ultrafast charge‐separation process. Interestingly, although an order of magnitude slower than k_CS, the rate of charge recombination, k_CR, was also found to be rapid (k_CR≈10¹⁰ s^?1), and both processes followed the solvent polarity trend DMF>benzonitrile>THF>toluene. The charge‐separated species relaxed directly to the ground state in polar solvents while in toluene, formation of ³corrole* was observed, thus implying that the energy of the charge‐separated state in a nonpolar solvent is higher than the energy of ³corrole* being about 1.52 eV. That is, ultrafast formation of a high‐energy charge‐separated state in toluene has been achieved in these closely spaced corrole–fullerene donor–acceptor conjugates.     

HOMO Stabilisation in π‐Extended Dibenzotetrathiafulvalene Derivatives for Their Application in Organic Field‐Effect Transistors

Three new organic semiconductors, in which either two methoxy units are directly linked to a dibenzotetrathiafulvalene (DB‐TTF) central core and a 2,1,3‐chalcogendiazole is fused on the one side, or four methoxy groups are linked to the DB‐TTF, have been synthesised as active materials for organic field‐effect transistors (OFETs). Their electrochemical behaviour, electronic absorption and fluorescence emission as well as photoinduced intramolecular charge transfer were studied. The electron‐withdrawing 2,1,3‐chalcogendiazole unit significantly affects the electronic properties of these semiconductors, lowering both the HOMO and LUMO energy levels and hence increasing the stability of the semiconducting material. The solution‐processed single‐crystal transistors exhibit high performance with a hole mobility up to 0.04 cm² V^?1 s^?1 as well as good ambient stability.     

Synthesis and Investigation of the V‐shaped Tröger′s Base Derivatives as Hole‐transporting Materials

V‐shaped Tröger′s base core has been investigated as a central linking unit in the synthesis of new charge‐transporting materials for optoelectronic applications. The studied molecules have been synthesized in two steps from relatively inexpensive starting materials, and demonstrate high glass transition temperatures, good stability of the amorphous state, and comparatively high hole drift mobility (up to 0.011 cm² V^?1 s^?1).     

Asymmetrical Fluorene[2,3‐b]benzo[d]thiophene Derivatives: Synthesis,Solid‐State Structures,and Application in Solution‐Processable Organic Light‐Emitting Diodes

A series of novel asymmetrical fused compounds containing the backbone of fluorene[2,3‐b]benzo[d]thiophene (FBT) were effectively synthesized and fully characterized. Single‐crystal X‐ray studies demonstrated that the length of the substituent side chains greatly affects the solid‐state packing of the obtained fused compounds. DFT, photophysical, and electrochemical studies all showed that the FBTs have large band gaps, low‐lying HOMO energy levels, and therefore good stability toward oxidation. Moreover, the substituents strongly influence the fluorescence properties of the resulting FBT derivatives. The di‐n‐hexyl compound exhibits intense fluorescence in solution with the highest quantum yield of up to 91 %. Solution‐processed green phosphorescent organic light‐emitting diodes with the di‐n‐butyl derivative as the host material exhibited a maximum brightness of 14 185 cd m^?2 and a luminescence efficiency of 12 cd A^?1.     

Fluorine‐Doped Antiperovskite Electrolyte for All‐Solid‐State Lithium‐Ion Batteries

A fluorine‐doped antiperovskite Li‐ion conductor Li₂(OH)X (X=Cl, Br) is shown to be a promising candidate for a solid electrolyte in an all‐solid‐state Li‐ion rechargeable battery. Substitution of F^? for OH^? transforms orthorhombic Li₂OHCl to a room‐temperature cubic phase, which shows electrochemical stability to 9 V versus Li⁺/Li and two orders of magnitude higher Li‐ion conductivity than that of orthorhombic Li₂OHCl. An all‐solid‐state Li/LiFePO₄ with F‐doped Li₂OHCl as the solid electrolyte showed good cyclability and a high coulombic efficiency over 40 charge/discharge cycles.     

Synthesis and Nonlinear Optical Properties of a New A-π-A Two-Photon Compound Utilizing Dibenzothiophene as Center

A new two‐photon material, 3E,6E‐bis(2‐pyrid‐4′‐ylvinyl)dibenzothiophene (BPVDBT), has been firstly synthesized by an efficient Pd‐catalyzed Heck coupling route. The single‐ and two‐photon fluorescence, quantum yields, lifetimes, solvent effects of the chromophore were studied in detail and the compound exhibited solvent‐sensitivity. The fluorescence intensity (I_out) and input excitation intensity (I_in) can fit in well with the quadratic parabolas, which indicates that the up‐converted fluorescence was induced by the two‐photon absorption (TPA). TPA cross‐section of BPVDBT has been measured using the two‐photon‐induced fluorescence method, whose value is 14.24×10^?50 cm⁴·s·photon^?1·molecule^?1 at 750 nm. The experimental results confirm that BPVDBT is a good two‐photon absorbing chromophore with an A‐π‐A type.     

一个新的具有大的吸收截面的双光子引发剂的合成和非线性光学性质

E,E-1,4-Bis（4＇-N,N-diphenylaminostyryl）-2,5-dimethoxybenzene （DPAMOB） has been synthesized by a simple and effective solid phase Wittig reaction and characterized by 1^H NMR spectra and elemental analysis, Linear absorption, single-photon induced fluorescence and two-photon induced fluorescence spectra were experimentally studied. The new dye has a large two-photon absorption （TPA） cross-section of σr= 1007,2 GM [1 GM= 1 × 10^-50 cm^4·s/（photon molecule）] at 800 nm measured by the two-photon induced fluorescence method. The experimental results confirm that DPAMOB is a good TPA chromophore and can successfully initiate two-photon photopolymerization of ethoxylated trimethylolpropane triacrylate esters （SR454）. Finally, a microstructure has been fabricated by use of DPAMOB as initiator.     

2,5‐Difluorenyl‐Substituted Siloles for the Fabrication of High‐Performance Yellow Organic Light‐Emitting Diodes

2,3,4,5‐Tetraarylsiloles are a class of important luminogenic materials with efficient solid‐state emission and excellent electron‐transport capacity. However, those exhibiting outstanding electroluminescence properties are still rare. In this work, bulky 9,9‐dimethylfluorenyl, 9,9‐diphenylfluorenyl, and 9,9′‐spirobifluorenyl substituents were introduced into the 2,5‐positions of silole rings. The resulting 2,5‐difluorenyl‐substituted siloles are thermally stable and have low‐lying LUMO energy levels. Crystallographic analysis revealed that intramolecular π–π interactions are prone to form between 9,9′‐spirobifluorene units and phenyl rings at the 3,4‐positions of the silole ring. In the solution state, these new siloles show weak blue and green emission bands, arising from the fluorenyl groups and silole rings with a certain extension of π conjugation, respectively. With increasing substituent volume, intramolecular rotation is decreased, and thus the emissions of the present siloles gradually improved and they showed higher fluorescence quantum yields (Φ_F=2.5–5.4 %) than 2,3,4,5‐tetraphenylsiloles. They are highly emissive in solid films, with dominant green to yellow emissions and good solid‐state Φ_F values (75–88 %). Efficient organic light‐emitting diodes were fabricated by adopting them as host emitters and gave high luminance, current efficiency, and power efficiency of up to 44 100 cd m^?2, 18.3 cd A^?1, and 15.7 lm W^?1, respectively. Notably, a maximum external quantum efficiency of 5.5 % was achieved in an optimized device.     

Two‐Photon Absorption Properties of Dehydrobenzo[12]annulenes and Hexakis(phenylethynyl)benzenes: Effect of Edge‐Linkage

Two‐photon absorption (TPA) properties of two trefoil‐shaped compounds with different edge linkages—tris(hexadehydrotribenzo[12]annulene) and tris(tetradehydrotribenzo[12]annulene)—and three asterisk‐shaped compounds having no edge‐linkage—hexakis(phenylethynyl)benzenes—are investigated experimentally by the open‐aperture Z‐scan and TPA‐induced fluorescence methods with wavelength tuneable femtosecond pulses. The compound with ethynylene edge‐linkage exhibits the most intense TPA (the maximal TPA cross section is 1300±170 GM at 572 nm where 1 GM=10^?50 cm⁴ s molecule^?1 photon^?1). The TPA activity of the compounds is primarily explained in terms of the planarity of the molecules in relation with the type of edge‐linkage.     

Mesogen‐controlled ion channel of star‐shaped hard–soft block copolymers for solid‐state lithium‐ion battery

Novel star‐shaped hard–soft triblock copolymers, 4‐arm poly(styrene)‐block‐poly [poly(ethylene glycol) methyl ethyl methacrylate]‐block‐poly{x‐[(4‐cyano‐4′‐biphenyl) oxy] alkyl methacrylate} (4PS‐PPEGMA‐PMAxLC) (x = 3, 10), with different mesogen spacer length are prepared by atom‐transfer radical polymerization. The star copolymers comprised three different parts: a hard polystyrene (PS) core to ensure the good mechanical property of the solid‐state polymer, and a soft, mobile poly[poly(ethylene glycol) methyl ethyl methacrylate] (PPEGMA) middle sphere responsible for the high ionic conductivity of the solid polyelectrolytes, and a poly{x‐[(4‐cyano‐4′‐biphenyl)oxy]alkyl methacrylate} with a birefringent mesogens at the end of each arm to tuning the electrolytes morphology. The star‐shaped hard–soft block copolymers fusing hard PS core with soft PPEGMA segment can form a flexible and transparent film with dimensional stability. Thermal annealing from the liquid crystalline states allows the cyanobiphenyl mesogens to induce a good assembly of hard and soft blocks, consequently obtaining uniform nanoscale microphase separation morphology, and the longer spacer is more helpful than the shorter one. There the ionic conductivity has been improved greatly by the orderly continuous channel for efficient ion transportation, especially at the elevated temperature. The copolymer 4PS‐PPEGMA‐PMA10LC shows ionic conductivity value of 1.3 × 10^?4 S cm^?1 (25 °C) after annealed from liquid crystal state, which is higher than that of 4PS‐PPEGMA electrolyte without mesogen groups. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4341–4350     

Efficient Hole‐Transporting Materials with Triazole Core for High‐Efficiency Perovskite Solar Cells

Efficient hole‐transporting materials (HTMs), TAZ‐[MeOTPA]₂ and TAZ‐[MeOTPATh]₂ incorporating two electron‐rich diphenylamino side arms, through direct linkage or thiophen bridges, respectively, on the C3‐ and C5‐positions of a 4‐phenyl‐1,2,4‐triazole core were synthesized. These synthetic HTMs with donor–acceptor type molecular structures exhibited effective intramolecular charge transfer for improving the hole‐transporting properties. The structural modification of HTMs by thiophene bridging might increase intermolecular π–π stacking in the solid state and afford a better spectral response because of their increased π‐conjugation length. Perovskite‐based cells using TAZ‐[MeOTPA]₂ and TAZ‐[MeOTPATh]₂ as HTMs afforded high power conversion efficiencies of 10.9 % and 14.4 %, respectively, showing a photovoltaic performance comparable to that obtained using spiro‐OMeTAD. These synthetically simple and inexpensive HTMs hold promise for replacing the more expensive spiro‐OMeTAD in high‐efficiency perovskite solar cells.     

Conjugated Donor‐Acceptor‐Acceptor (D‐A‐A) Molecule for Organic Nonvolatile Resistor Memory

A new donor‐acceptor‐acceptor (D‐A‐A) type of conjugated molecule, N‐(4‐(N′,N′‐diphenyl)phenylamine)‐4‐(4′‐(2,2‐dicyanovinyl)phenyl) naphthalene‐1,8‐dicarboxylic monoimide ( TPA‐NI‐DCN ), consisting of triphenylamine (TPA) donors and naphthalimide (NI)/dicyanovinylene (DCN) acceptors was synthesized and characterized. In conjunction with previously reported D ‐A based materials, the additional DCN moiety attached as end group in the D‐A‐A configuration can result in a stable charge transfer (CT) and charge‐separated state to maintain the ON state current. The vacuum‐deposited TPA‐NI‐DCN device fabricated as an active memory layer was demonstrated to exhibit write‐once‐read‐many (WORM) switching characteristics of organic nonvolatile memory due to the strong polarity of the TPA‐NI‐DCN moiety.     

Concise Synthesis and Two‐Photon‐Excited Deep‐Blue Emission of 1,8‐Diazapyrenes

Efficient violet–blue‐emitting molecules are especially useful for applications in full‐color displays, solid‐state lighting, as well as in two‐photon absorption (TPA) excited frequency‐upconverted violet–blue lasing. However, the reported violet–blue‐emitting molecules generally possess small TPA cross sections. In this work, new 1,8‐diazapyrenes derivatives 3 with blue two‐photon‐excited fluorescence emission were concisely synthesized by the coupling reaction of readily available 1,4‐naphthoquinone O,O‐diacetyl dioxime ( 1 ) with internal alkynes 2 under the [{RhCl₂Cp*}₂]–Cu(OAc)₂ (Cp*=pentamethylcyclopentadienyl ligand) bimetallic catalytic system. Elongation of the π‐conjugated length of 1,8‐diazapyrenes 3 led to the increase of TPA cross sections without the expense of a redshift of the emission wavelength, probably due to the rigid planar structure of chromophores. It is especially noteworthy that 2,3,6,7‐tetra(4‐bromophenyl)‐1,8‐diazapyrene ( 3c ) has a larger TPA cross section than those of other molecules reported so far. These experimental results are explained in terms of the effects of extension of the π‐conjugated system, intramolecular charge transfer, and reduced detuning energy.     

An Adjustable‐Porosity Plastic Crystal Electrolyte Enables High‐Performance All‐Solid‐State Lithium‐Oxygen Batteries

The limited triple‐phase boundaries (TPBs) in solid‐state cathodes (SSCs) and high resistance imposed by solid electrolytes (SEs) make the achievement of high‐performance all‐solid‐state lithium‐oxygen (ASS Li‐O₂) batteries a challenge. Herein, an adjustable‐porosity plastic crystal electrolyte (PCE) has been fabricated by employing a thermally induced phase separation (TIPS) technique to overcome the above tricky issues. The SSC produced through the in‐situ introduction of the porous PCE on the surface of the active material, facilitates the simultaneous transfer of Li⁺/e^?, as well as ensures fast flow of O₂, forming continuous and abundant TPBs. The high Li⁺ conductivity, softness, and adhesion of the dense PCE significantly reduce the battery resistance to 115 Ω. As a result, the ASS Li‐O₂ battery based on this adjustable‐porosity PCE exhibits superior performances with high specific capacity (5963 mAh g^?1), good rate capability, and stable cycling life up to 130 cycles at 32 °C. This novel design and exciting results could open a new avenue for ASS Li‐O₂ batteries.     

Efficient NIR‐Light Emission from Solid‐State Complexes of Boron Difluoride with 2′‐Hydroxychalcone Derivatives

This article describes a series of nine complexes of boron difluoride with 2′‐hydroxychacone derivatives. These dyes were synthesized very simply and exhibited intense NIR emission in the solid state. Complexation with boron was shown to impart very strong donor–acceptor character into the excited state of these dyes, which further shifted their emission towards the NIR region (up to 855 nm for dye 5 b , which contained the strongly donating triphenylamine group). Strikingly, these optical features were obtained for crystalline solids, which are characterized by high molecular order and tight packing, two features that are conventionally believed to be detrimental to luminescence in organic crystals. Remarkably, the emission of light from the π‐stacked molecules did not occur at the expense of the emission quantum yield. Indeed, in the case of pyrene‐containing dye 4 , for example, a fluorescence quantum yield of about 15 % with a fluorescence emission maximum at 755 nm were obtained in the solid state. Moreover, dye 3 a and acetonaphthone‐based compounds 1 b , 2 b , and 3 b showed no evidence of degradation as solutions in CH₂Cl₂ that contained EtOH. In particular, solutions of brightly fluorescent compound 3 a (brightness: ε×Φ_f=45 000 M ^?1 cm^?1) could be stored for long periods without any detectable changes in its optical properties. All together, these new dyes possess a set of very interesting properties that make them promising solid‐state NIR fluorophores for applications in materials science.     

Luminescence Properties of C‐Diazaborolyl‐ortho‐Carboranes as Donor–Acceptor Systems

Seven derivatives of 1,2‐dicarbadodecaborane (ortho‐carborane, 1,2‐C₂B₁₀H₁₂) with a 1,3‐diethyl‐ or 1,3‐diphenyl‐1,3,2‐benzodiazaborolyl group on one cage carbon atom were synthesized and structurally characterized. Six of these compounds showed remarkable low‐energy fluorescence emissions with large Stokes shifts of 15100–20260 cm^?1 and quantum yields (Φ_F) of up to 65 % in the solid state. The low‐energy fluorescence emission, which was assigned to a charge‐transfer (CT) transition between the cage and the heterocyclic unit, depended on the orientation (torsion angle, ψ) of the diazaborolyl group with respect to the cage C? C bond. In cyclohexane, two compounds exhibited very weak dual fluorescence emissions with Stokes shifts of 15660–18090 cm^?1 for the CT bands and 1960–5540 cm^?1 for the high‐energy bands, which were assigned to local transitions within the benzodiazaborole units (local excitation, LE), whereas four compounds showed only CT bands with Φ_F values between 8–32 %. Two distinct excited singlet‐state (S₁) geometries, denoted S₁(LE) and S₁(CT), were observed computationally for the benzodiazaborolyl‐ortho‐carboranes, the population of which depended on their orientation (ψ). TD‐DFT calculations on these excited state geometries were in accord with their CT and LE emissions. These C‐diazaborolyl‐ortho‐carboranes were viewed as donor–acceptor systems with the diazaborolyl group as the donor and the ortho‐carboranyl group as the acceptor.     

Direct Solar‐to‐Electrochemical Energy Storage in a Functionalized Covalent Organic Framework

A covalent organic framework integrating naphthalenediimide and triphenylamine units (NT‐COF) is presented. Two‐dimensional porous nanosheets are packed with a high specific surface area of 1276 m² g^?1. Photo/electrochemical measurements reveal the ultrahigh efficient intramolecular charge transfer from the TPA to the NDI and the highly reversible electrochemical reaction in NT‐COF. There is a synergetic effect in NT‐COF between the reversible electrochemical reaction and intramolecular charge transfer with enhanced solar energy efficiency and an accelerated electrochemical reaction. This synergetic mechanism provides the key basis for direct solar‐to‐electrochemical energy conversion/storage. With the NT‐COF as the cathode materials, a solar Li‐ion battery is realized with decreased charge voltage (by 0.5 V), increased discharge voltage (by 0.5 V), and extra 38.7 % battery efficiency.